McAfee Secure

HP HPE7-A01 Bundle

Exam Code: HPE7-A01

Exam Name HPE Network Campus Access Professional

Certification Provider: HP

Corresponding Certification: HPE Aruba Networking Certified Professional - Campus Access

HP HPE7-A01 Bundle $19.99
HPE7-A01 Sample 1 HPE7-A01 Sample 2 HPE7-A01 Sample 3 HPE7-A01 Sample 4 HPE7-A01 Sample 5 HPE7-A01 Sample 6 HPE7-A01 Sample 7 HPE7-A01 Sample 8 HPE7-A01 Sample 9 HPE7-A01 Sample 10

100% HP HPE7-A01 Guaranteed Success With Testking Training Materials

Get Real HPE7-A01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    HPE7-A01 Questions & Answers

    161 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual HPE7-A01 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • Study Guide

    HPE7-A01 Study Guide

    1264 PDF Pages

    Developed by industry experts, this 1264-page guide spells out in painstaking detail all of the information you need to ace HPE7-A01 exam.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $154.98
Bundle Price: $134.99

Purchase Individually

  • Questions & Answers

    Questions & Answers

    161 Questions

    $124.99
  • Study Guide

    Study Guide

    1264 PDF Pages

    $29.99

HP HPE7-A01 Practice Test 62

Question 610

A floor switch connects APs but the uplink passes only the native VLAN while employee and voice SSIDs use tagged VLANs. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Test telemetry from each required VRF as part of monitoring acceptance.
  2. Keep shutdown state and authorized port roles in access templates.
  3. Version-control SSID-to-VLAN mappings alongside switching templates.
  4. Audit trunk allowed lists against WLAN-to-VLAN mappings during site rollout.

Explanation

Correct Answer

D:

This is a continuing control for the failure mode in which the trunk's allowed-VLAN list excludes the tagged client networks. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when a campus switch forwards IPv4 client traffic but cannot send SNMP traps to a server because the trap destination is reachable only through another VRF. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when an endpoint sees physical carrier on an Aruba CX port but the administrator configured the port administratively disabled. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a wireless building is connected to the core but a user VLAN is mapped inconsistently between the SSID profile and switch trunk. It would leave the present failure mode insufficiently addressed.

Question 611

An AP in a new building gets an IP address but discovers no management controller where the design uses controller discovery. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Test telemetry from each required VRF as part of monitoring acceptance.
  2. Keep shutdown state and authorized port roles in access templates.
  3. Include DNS dependency checks when moving NAC nodes.
  4. Include controller discovery and DNS or DHCP option prerequisites in AP deployment checklists.

Explanation

Correct Answer

D:

This is a continuing control for the failure mode in which DHCP allocation alone does not provide controller discovery or controller-route reachability. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when a campus switch forwards IPv4 client traffic but cannot send SNMP traps to a server because the trap destination is reachable only through another VRF. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when an endpoint sees physical carrier on an Aruba CX port but the administrator configured the port administratively disabled. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a campus uses a highly available DNS name for the NAC service, yet one site resolves an obsolete server address. It would leave the present failure mode insufficiently addressed.

Question 612

A floor switch responds on the out-of-band management port, but traffic sourced from its default VRF cannot reach the telemetry server. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Track device PoE requirements against the rack-level power budget.
  2. Define redundant time sources in standard campus management templates.
  3. Label management VRF dependencies in monitoring integration records.
  4. Test telemetry from each required VRF as part of monitoring acceptance.

Explanation

Correct Answer

C:

This is a continuing control for the failure mode in which the management and default VRFs maintain separate forwarding tables. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when an access stack stops powering some APs after a larger radio model is deployed on the same ports. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when an AP has a healthy uplink but reports that clock synchronization cannot reach a time source, breaking certificate-based provisioning. It would leave the present failure mode insufficiently addressed.

D:

That control is useful for a different failure, such as when a campus switch forwards IPv4 client traffic but cannot send SNMP traps to a server because the trap destination is reachable only through another VRF. It would leave the present failure mode insufficiently addressed.

Question 613

A wireless building is connected to the core but a user VLAN is mapped inconsistently between the SSID profile and switch trunk. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Verify serial ownership and intended tenant before claiming new inventory.
  2. Match switchport negotiation standards with real endpoint interface capabilities.
  3. Version-control SSID-to-VLAN mappings alongside switching templates.
  4. Require architecture review before requesting cross-site broadcast-domain extension.

Explanation

Correct Answer

C:

This is a continuing control for the failure mode in which the wireless access edge assigns clients to a VLAN that is missing from the intended wired transport. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when a newly added downstream stack is reachable by ping but cannot complete Central group onboarding because it appears under the wrong tenant. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when an IoT reader operates only at 100 Mbps, while the switch port is forced to a gigabit-only setting. It would leave the present failure mode insufficiently addressed.

D:

That control is useful for a different failure, such as when two campuses are connected over a routed WAN, but a team expects a new Layer 2 VLAN to extend automatically to the remote building. It would leave the present failure mode insufficiently addressed.

Question 614

A campus uses a highly available DNS name for the NAC service, yet one site resolves an obsolete server address. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Keep shutdown state and authorized port roles in access templates.
  2. Test telemetry from each required VRF as part of monitoring acceptance.
  3. Match switchport negotiation standards with real endpoint interface capabilities.
  4. Include DNS dependency checks when moving NAC nodes.

Explanation

Correct Answer

D:

This is a continuing control for the failure mode in which the access switch follows an outdated resolved address despite having a valid AAA profile. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when an endpoint sees physical carrier on an Aruba CX port but the administrator configured the port administratively disabled. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when a campus switch forwards IPv4 client traffic but cannot send SNMP traps to a server because the trap destination is reachable only through another VRF. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when an IoT reader operates only at 100 Mbps, while the switch port is forced to a gigabit-only setting. It would leave the present failure mode insufficiently addressed.

Question 615

A VoIP handset receives power from an access switch but lands in the data VLAN rather than its intended voice VLAN. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Test phone model behavior against voice-VLAN advertisement and authentication rules.
  2. Validate access port modes during service-desk provisioning.
  3. Label management VRF dependencies in monitoring integration records.
  4. Keep management connectivity prerequisites with zero-touch deployment templates.

Explanation

Correct Answer

A:

This is a continuing control for the failure mode in which power delivery and the phone's voice VLAN classification are separate controls. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

B:

That control is useful for a different failure, such as when a central services VLAN is on the approved trunk but a new access port uses a mismatched untagged VLAN. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a floor switch responds on the out-of-band management port, but traffic sourced from its default VRF cannot reach the telemetry server. It would leave the present failure mode insufficiently addressed.

D:

That control is useful for a different failure, such as when a new branch switch powers on but remains absent from Central after its management VLAN is provisioned. It would leave the present failure mode insufficiently addressed.

Question 616

An access stack stops powering some APs after a larger radio model is deployed on the same ports. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Label management VRF dependencies in monitoring integration records.
  2. Version-control SSID-to-VLAN mappings alongside switching templates.
  3. Keep management connectivity prerequisites with zero-touch deployment templates.
  4. Track device PoE requirements against the rack-level power budget.

Explanation

Correct Answer

D:

This is a continuing control for the failure mode in which available PoE power or negotiated class is insufficient for the newer AP's operating requirements. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when a floor switch responds on the out-of-band management port, but traffic sourced from its default VRF cannot reach the telemetry server. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when a wireless building is connected to the core but a user VLAN is mapped inconsistently between the SSID profile and switch trunk. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a new branch switch powers on but remains absent from Central after its management VLAN is provisioned. It would leave the present failure mode insufficiently addressed.

Question 617

An endpoint sees physical carrier on an Aruba CX port but the administrator configured the port administratively disabled. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Test telemetry from each required VRF as part of monitoring acceptance.
  2. Version-control SSID-to-VLAN mappings alongside switching templates.
  3. Label management VRF dependencies in monitoring integration records.
  4. Keep shutdown state and authorized port roles in access templates.

Explanation

Correct Answer

D:

This is a continuing control for the failure mode in which optical carrier cannot override an administratively disabled interface. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

A:

That control is useful for a different failure, such as when a campus switch forwards IPv4 client traffic but cannot send SNMP traps to a server because the trap destination is reachable only through another VRF. It would leave the present failure mode insufficiently addressed.

B:

That control is useful for a different failure, such as when a wireless building is connected to the core but a user VLAN is mapped inconsistently between the SSID profile and switch trunk. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a floor switch responds on the out-of-band management port, but traffic sourced from its default VRF cannot reach the telemetry server. It would leave the present failure mode insufficiently addressed.

Question 618

An LACP bundle has four member links, but only two forward because the partner uses a different aggregation key. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Record partner IDs and LAG designs before touching physical member ports.
  2. Label management VRF dependencies in monitoring integration records.
  3. Test telemetry from each required VRF as part of monitoring acceptance.
  4. Audit trunk allowed lists against WLAN-to-VLAN mappings during site rollout.

Explanation

Correct Answer

A:

This is a continuing control for the failure mode in which members with mismatched partner or key information cannot join the same LAG forwarding aggregator. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

B:

That control is useful for a different failure, such as when a floor switch responds on the out-of-band management port, but traffic sourced from its default VRF cannot reach the telemetry server. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a campus switch forwards IPv4 client traffic but cannot send SNMP traps to a server because the trap destination is reachable only through another VRF. It would leave the present failure mode insufficiently addressed.

D:

That control is useful for a different failure, such as when a floor switch connects APs but the uplink passes only the native VLAN while employee and voice SSIDs use tagged VLANs. It would leave the present failure mode insufficiently addressed.

Question 619

Two campuses are connected over a routed WAN, but a team expects a new Layer 2 VLAN to extend automatically to the remote building. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Require architecture review before requesting cross-site broadcast-domain extension.
  2. Match switchport negotiation standards with real endpoint interface capabilities.
  3. Test phone model behavior against voice-VLAN advertisement and authentication rules.
  4. Record partner IDs and LAG designs before touching physical member ports.

Explanation

Correct Answer

A:

This is a continuing control for the failure mode in which an IP-routed link does not propagate Ethernet broadcast domains merely because VLAN IDs match. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

B:

That control is useful for a different failure, such as when an IoT reader operates only at 100 Mbps, while the switch port is forced to a gigabit-only setting. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a VoIP handset receives power from an access switch but lands in the data VLAN rather than its intended voice VLAN. It would leave the present failure mode insufficiently addressed.

D:

That control is useful for a different failure, such as when an LACP bundle has four member links, but only two forward because the partner uses a different aggregation key. It would leave the present failure mode insufficiently addressed.

Question 620

A central services VLAN is on the approved trunk but a new access port uses a mismatched untagged VLAN. Which ongoing operational safeguard best reduces the chance of recurrence?

  1. Validate access port modes during service-desk provisioning.
  2. Require architecture review before requesting cross-site broadcast-domain extension.
  3. Label management VRF dependencies in monitoring integration records.
  4. Include DNS dependency checks when moving NAC nodes.

Explanation

Correct Answer

A:

This is a continuing control for the failure mode in which the endpoint is placed into a different broadcast domain than the required service. It complements the immediate fix instead of relying on a one-off correction.

Incorrect Answers

B:

That control is useful for a different failure, such as when two campuses are connected over a routed WAN, but a team expects a new Layer 2 VLAN to extend automatically to the remote building. It would leave the present failure mode insufficiently addressed.

C:

That control is useful for a different failure, such as when a floor switch responds on the out-of-band management port, but traffic sourced from its default VRF cannot reach the telemetry server. It would leave the present failure mode insufficiently addressed.

D:

That control is useful for a different failure, such as when a campus uses a highly available DNS name for the NAC service, yet one site resolves an obsolete server address. It would leave the present failure mode insufficiently addressed.