McAfee Secure

HP HPE7-A01 Bundle

Exam Code: HPE7-A01

Exam Name HPE Network Campus Access Professional

Certification Provider: HP

Corresponding Certification: HPE Aruba Networking Certified Professional - Campus Access

HP HPE7-A01 Bundle $19.99

100% HP HPE7-A01 Guaranteed Success With Testking Training Materials

Get Real HPE7-A01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    HPE7-A01 Questions & Answers

    161 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual HPE7-A01 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • Study Guide

    HPE7-A01 Study Guide

    1264 PDF Pages

    Developed by industry experts, this 1264-page guide spells out in painstaking detail all of the information you need to ace HPE7-A01 exam.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $154.98
Bundle Price: $134.99

Purchase Individually

  • Questions & Answers

    Questions & Answers

    161 Questions

    $124.99
  • Study Guide

    Study Guide

    1264 PDF Pages

    $29.99

HP HPE7-A01 Practice Test 97

Question 960

A campus AAA deployment has two RADIUS servers, but requests continue timing out because both hostnames resolve to the same failed address. Which first diagnostic check is most useful before changing the network?

  1. Inspect guest account status, session attributes and expiry timestamp.
  2. Inspect server hostname resolution and live AAA target addresses.
  3. Inspect session age, EAP state and revocation or CoA events.
  4. Inspect RADIUS timeout logs, source addresses and UDP/TCP ACL counters as applicable.

Explanation

Correct Answer

B:

This check collects evidence at the layer implicated by the symptom: configured redundancy is illusory when both server entries point to one unavailable destination. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when a guest sponsor approves a visitor account, but the NAC policy still maps the visitor to the expired guest role, but is less direct for the issue at hand: configured redundancy is illusory when both server entries point to one unavailable destination.

C:

This would be a reasonable check when a corporate certificate was revoked, yet a connected endpoint retains network access indefinitely because no session reauthentication or revocation response occurs, but is less direct for the issue at hand: configured redundancy is illusory when both server entries point to one unavailable destination.

D:

This would be a reasonable check when staff Wi-Fi clients have correct certificates but the RADIUS server cannot see authentication requests after a network ACL update, but is less direct for the issue at hand: configured redundancy is illusory when both server entries point to one unavailable destination.

Question 961

A user moves between wired campus locations and receives inconsistent roles because one access switch uses an older enforcement dictionary. Which first diagnostic check is most useful before changing the network?

  1. Inspect RADIUS Access-Accept attributes and client effective role.
  2. Compare RADIUS responses and per-switch authorization mapping.
  3. Inspect CoA request logs, source addresses and device accept/reject reason.
  4. Inspect port-access state, fallback role and actual client policy.

Explanation

Correct Answer

B:

This check collects evidence at the layer implicated by the symptom: different enforcement versions interpret the same identity or role attributes inconsistently. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when an access controller accepts a staff user from RADIUS but assigns the guest role because the expected role attribute is absent, but is less direct for the issue at hand: different enforcement versions interpret the same identity or role attributes inconsistently.

C:

This would be a reasonable check when a network operator sends RADIUS CoA to update a client's role but the switch does not accept it from the configured AAA server, but is less direct for the issue at hand: different enforcement versions interpret the same identity or role attributes inconsistently.

D:

This would be a reasonable check when an access switch performs 802.1X on user ports, but unauthenticated clients are placed into production VLAN by an incorrect fallback policy, but is less direct for the issue at hand: different enforcement versions interpret the same identity or role attributes inconsistently.

Question 962

A switch shows an EAP failure but engineers alter the user's VLAN before confirming whether the supplicant completed authentication. Which first diagnostic check is most useful before changing the network?

  1. Inspect server hostname resolution and live AAA target addresses.
  2. Inspect EAP method progress, RADIUS decision and eventual assigned access role.
  3. Inspect RADIUS timeout logs, source addresses and UDP/TCP ACL counters as applicable.
  4. Inspect per-MAC authentication sessions and assigned domains on the port.

Explanation

Correct Answer

B:

This check collects evidence at the layer implicated by the symptom: the client has not reached the authorization stage, so VLAN policy is premature. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when a campus AAA deployment has two RADIUS servers, but requests continue timing out because both hostnames resolve to the same failed address, but is less direct for the issue at hand: the client has not reached the authorization stage, so VLAN policy is premature.

C:

This would be a reasonable check when staff Wi-Fi clients have correct certificates but the RADIUS server cannot see authentication requests after a network ACL update, but is less direct for the issue at hand: the client has not reached the authorization stage, so VLAN policy is premature.

D:

This would be a reasonable check when a wired port with both a phone and workstation grants employee access to the phone's unauthenticated identity, but is less direct for the issue at hand: the client has not reached the authorization stage, so VLAN policy is premature.

Question 963

A NOC captures an uplink's traffic from the wrong mirror source port and misses the client authentication failure. Which first diagnostic check is most useful before changing the network?

  1. Inspect configured mirror sources, direction and capture-port counters.
  2. Inspect device Central connection state, management DNS and route.
  3. Inspect Central or switch API audit events and authorization identity.
  4. Inspect polling gaps, retries and state evaluation rules.

Explanation

Correct Answer

A:

This check collects evidence at the layer implicated by the symptom: the mirror session observes unrelated traffic rather than the flow under investigation. Examine the evidence before choosing the corrective change.

Incorrect Answers

B:

This would be a reasonable check when a Central dashboard reports intermittent switch disconnections after device management moves to a new VLAN, but is less direct for the issue at hand: the mirror session observes unrelated traffic rather than the flow under investigation.

C:

This would be a reasonable check when an external automation script changes CX VLAN configuration but the operations team cannot trace when it happened, but is less direct for the issue at hand: the mirror session observes unrelated traffic rather than the flow under investigation.

D:

This would be a reasonable check when a monitoring dashboard hides real device outages because its poller assumes success on missing SNMP responses, but is less direct for the issue at hand: the mirror session observes unrelated traffic rather than the flow under investigation.

Question 964

A packet capture taken only on a client endpoint cannot reveal which VLAN tags the upstream trunk adds to frames. Which first diagnostic check is most useful before changing the network?

  1. Inspect polling gaps, retries and state evaluation rules.
  2. Inspect CPU by process, logs and control-plane packet activity.
  3. Compare endpoint and trunk-level captures for VLAN tag visibility.
  4. Inspect API response status, token expiry and granted scope.

Explanation

Correct Answer

C:

This check collects evidence at the layer implicated by the symptom: the endpoint capture point sees already-decapsulated traffic rather than the trunk's 802.1Q headers. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when a monitoring dashboard hides real device outages because its poller assumes success on missing SNMP responses, but is less direct for the issue at hand: the endpoint capture point sees already-decapsulated traffic rather than the trunk's 802.1Q headers.

B:

This would be a reasonable check when an engineer sees high CPU on an access switch but proposes rebooting it immediately during the school day, but is less direct for the issue at hand: the endpoint capture point sees already-decapsulated traffic rather than the trunk's 802.1Q headers.

D:

This would be a reasonable check when a monitoring API integration stops receiving data after a credential rotation despite healthy switch and WAN links, but is less direct for the issue at hand: the endpoint capture point sees already-decapsulated traffic rather than the trunk's 802.1Q headers.

Question 965

An NAE agent is intended to alert on a growing interface discard counter but the monitored variable is the wrong physical port. Which first diagnostic check is most useful before changing the network?

  1. Compare UXI failed test stage with DNS, network and application logs.
  2. Inspect the NAE agent's watched URI, variable and observed counter values.
  3. Inspect polling gaps, retries and state evaluation rules.
  4. Compare endpoint and trunk-level captures for VLAN tag visibility.

Explanation

Correct Answer

B:

This check collects evidence at the layer implicated by the symptom: the telemetry rule watches a valid counter on an unrelated port, hiding the actual fault. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when UXI sensors show failed cloud-application transactions but the WLAN dashboard reports healthy client associations, but is less direct for the issue at hand: the telemetry rule watches a valid counter on an unrelated port, hiding the actual fault.

C:

This would be a reasonable check when a monitoring dashboard hides real device outages because its poller assumes success on missing SNMP responses, but is less direct for the issue at hand: the telemetry rule watches a valid counter on an unrelated port, hiding the actual fault.

D:

This would be a reasonable check when a packet capture taken only on a client endpoint cannot reveal which VLAN tags the upstream trunk adds to frames, but is less direct for the issue at hand: the telemetry rule watches a valid counter on an unrelated port, hiding the actual fault.

Question 966

UXI sensors show failed cloud-application transactions but the WLAN dashboard reports healthy client associations. Which first diagnostic check is most useful before changing the network?

  1. Compare UXI failed test stage with DNS, network and application logs.
  2. Inspect the NAE agent's watched URI, variable and observed counter values.
  3. Inspect Central or switch API audit events and authorization identity.
  4. Inspect device Central connection state, management DNS and route.

Explanation

Correct Answer

A:

This check collects evidence at the layer implicated by the symptom: association health does not guarantee service-level performance or application success. Examine the evidence before choosing the corrective change.

Incorrect Answers

B:

This would be a reasonable check when an NAE agent is intended to alert on a growing interface discard counter but the monitored variable is the wrong physical port, but is less direct for the issue at hand: association health does not guarantee service-level performance or application success.

C:

This would be a reasonable check when an external automation script changes CX VLAN configuration but the operations team cannot trace when it happened, but is less direct for the issue at hand: association health does not guarantee service-level performance or application success.

D:

This would be a reasonable check when a Central dashboard reports intermittent switch disconnections after device management moves to a new VLAN, but is less direct for the issue at hand: association health does not guarantee service-level performance or application success.

Question 967

A Central dashboard reports intermittent switch disconnections after device management moves to a new VLAN. Which first diagnostic check is most useful before changing the network?

  1. Inspect remote logging destinations, source VRF and transport error counters.
  2. Compare endpoint and trunk-level captures for VLAN tag visibility.
  3. Inspect device Central connection state, management DNS and route.
  4. Inspect configured mirror sources, direction and capture-port counters.

Explanation

Correct Answer

C:

This check collects evidence at the layer implicated by the symptom: the management plane's outbound route or firewall policy was not migrated with the VLAN change. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when a campus operator enables verbose syslog locally but remote log storage shows no new events, but is less direct for the issue at hand: the management plane's outbound route or firewall policy was not migrated with the VLAN change.

B:

This would be a reasonable check when a packet capture taken only on a client endpoint cannot reveal which VLAN tags the upstream trunk adds to frames, but is less direct for the issue at hand: the management plane's outbound route or firewall policy was not migrated with the VLAN change.

D:

This would be a reasonable check when a NOC captures an uplink's traffic from the wrong mirror source port and misses the client authentication failure, but is less direct for the issue at hand: the management plane's outbound route or firewall policy was not migrated with the VLAN change.

Question 968

A monitoring dashboard hides real device outages because its poller assumes success on missing SNMP responses. Which first diagnostic check is most useful before changing the network?

  1. Inspect Central or switch API audit events and authorization identity.
  2. Inspect polling gaps, retries and state evaluation rules.
  3. Inspect remote logging destinations, source VRF and transport error counters.
  4. Inspect CPU by process, logs and control-plane packet activity.

Explanation

Correct Answer

B:

This check collects evidence at the layer implicated by the symptom: missing telemetry must not be interpreted as a positive health measurement. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when an external automation script changes CX VLAN configuration but the operations team cannot trace when it happened, but is less direct for the issue at hand: missing telemetry must not be interpreted as a positive health measurement.

C:

This would be a reasonable check when a campus operator enables verbose syslog locally but remote log storage shows no new events, but is less direct for the issue at hand: missing telemetry must not be interpreted as a positive health measurement.

D:

This would be a reasonable check when an engineer sees high CPU on an access switch but proposes rebooting it immediately during the school day, but is less direct for the issue at hand: missing telemetry must not be interpreted as a positive health measurement.

Question 969

An external automation script changes CX VLAN configuration but the operations team cannot trace when it happened. Which first diagnostic check is most useful before changing the network?

  1. Inspect backup timestamps, configuration versions and restore test records.
  2. Compare UXI failed test stage with DNS, network and application logs.
  3. Inspect device Central connection state, management DNS and route.
  4. Inspect Central or switch API audit events and authorization identity.

Explanation

Correct Answer

D:

This check collects evidence at the layer implicated by the symptom: unattributed automation hides which program altered production network policy. Examine the evidence before choosing the corrective change.

Incorrect Answers

A:

This would be a reasonable check when a switch team takes firmware backups but no configuration snapshot before a planned major change, but is less direct for the issue at hand: unattributed automation hides which program altered production network policy.

B:

This would be a reasonable check when UXI sensors show failed cloud-application transactions but the WLAN dashboard reports healthy client associations, but is less direct for the issue at hand: unattributed automation hides which program altered production network policy.

C:

This would be a reasonable check when a Central dashboard reports intermittent switch disconnections after device management moves to a new VLAN, but is less direct for the issue at hand: unattributed automation hides which program altered production network policy.

Question 970

A switch team takes firmware backups but no configuration snapshot before a planned major change. Which first diagnostic check is most useful before changing the network?

  1. Inspect backup timestamps, configuration versions and restore test records.
  2. Inspect device Central connection state, management DNS and route.
  3. Compare endpoint and trunk-level captures for VLAN tag visibility.
  4. Inspect Central or switch API audit events and authorization identity.

Explanation

Correct Answer

A:

This check collects evidence at the layer implicated by the symptom: a software image alone does not reconstruct the previous running configuration. Examine the evidence before choosing the corrective change.

Incorrect Answers

B:

This would be a reasonable check when a Central dashboard reports intermittent switch disconnections after device management moves to a new VLAN, but is less direct for the issue at hand: a software image alone does not reconstruct the previous running configuration.

C:

This would be a reasonable check when a packet capture taken only on a client endpoint cannot reveal which VLAN tags the upstream trunk adds to frames, but is less direct for the issue at hand: a software image alone does not reconstruct the previous running configuration.

D:

This would be a reasonable check when an external automation script changes CX VLAN configuration but the operations team cannot trace when it happened, but is less direct for the issue at hand: a software image alone does not reconstruct the previous running configuration.