McAfee Secure

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 34

Question 330

A deployment has regressed with this symptom: An engineer adds a duplicate TCP 443 allow rule but the same application sensor continues to deny it. Select the most specific fix.

  1. Correct the effective firewall policy/profile attachment based on traffic logs.
  2. Change the effective application-control rule after reviewing its signature event.
  3. Update the IPS signature database and verify the actual revision.
  4. Attach and tune the appropriate IPS sensor on the effective application policy.

Explanation

Correct Answer

B:

Firewall accept and application-control enforcement are separate decisions. The remedy is Change the effective application-control rule after reviewing its signature event.

Incorrect Answers

A:

A configured sensor has no effect unless the session matches a policy using it. In the reported case, firewall accept and application-control enforcement are separate decisions.

C:

IPS protection for newly covered exploits depends on available updated signatures. In the reported case, firewall accept and application-control enforcement are separate decisions.

D:

IPS detects exploit payload patterns above ordinary port-based firewall matching. In the reported case, firewall accept and application-control enforcement are separate decisions.

Question 331

An operational test failed because: Both services map the same external port and only one backend receives traffic. What remediation addresses the underlying cause?

  1. Use unique external-port mappings and correct internal destinations.
  2. Correct collector group filters and FortiGate group selection.
  3. Move the specific deny above the broad allow and test the matching policy ID.
  4. Map the public external IP to the existing private server using a VIP.

Explanation

Correct Answer

A:

Port-forward VIP selection disambiguates services behind a shared public address. The remedy is Use unique external-port mappings and correct internal destinations.

Incorrect Answers

B:

User-to-group identity must be matched consistently between domain, collector and policy. In the reported case, port-forward VIP selection disambiguates services behind a shared public address.

C:

Effective policy ordering, not labels, governs first applicable forwarding decisions. In the reported case, port-forward VIP selection disambiguates services behind a shared public address.

D:

Static VIPs map external destinations to internal addresses without renumbering the backend. In the reported case, port-forward VIP selection disambiguates services behind a shared public address.

Question 332

The following change is now configured: Plan hairpin NAT with appropriate VIP and policy so local-to-public-IP access returns correctly. Which test result verifies the intended behavior?

  1. The backend logs the intended client source and replies route symmetrically.
  2. An internal client reaches the published FQDN and the reply follows the expected translated path.
  3. A packet entering the true server VLAN reaches the rule and records the expected policy ID.
  4. A finance-host HTTPS session matches the named policy; a guest-host test matches a deny.

Explanation

Correct Answer

B:

Hairpin access needs a policy and address-resolution design for internal users of public service names. The test should show that An internal client reaches the published FQDN and the reply follows the expected translated path.

Incorrect Answers

A:

Not every permitted flow requires source NAT; visibility and return routes can require preserving addresses. The stated configuration instead needs this result: an internal client reaches the published FQDN and the reply follows the expected translated path.

C:

Firewall policy interface fields must match the actual packet path as well as IP addresses. The stated configuration instead needs this result: an internal client reaches the published FQDN and the reply follows the expected translated path.

D:

FortiGate forward policies evaluate the matching interface/address/service/schedule conditions and effective ordering. The stated configuration instead needs this result: an internal client reaches the published FQDN and the reply follows the expected translated path.

Question 333

A FortiGate administrator must satisfy this condition without unrelated redesign: After switching a management port, technicians cannot reach the FortiGate even though the interface link is up. Which option is most appropriate?

  1. Verify the management IP, subnet, allowed access protocols and administrator trusted hosts from console.
  2. Filter traffic logs by source IP, action and time range, then inspect policy and session metadata.
  3. Restrict administrative access on the management interface and use an approved trusted-host range for administrators.
  4. Evaluate supported FortiGate CNF service deployment and policy integration for the cloud environment.

Explanation

Correct Answer

A:

Physical link state alone does not validate IP reachability or management-plane permission. Confirmation is obtained when an authorized host can establish SSH/HTTPS on the intended IP while unauthorized sources remain blocked.

Incorrect Answers

B:

Log queries should preserve time and traffic direction context to avoid false incident conclusions. In the reported case, physical link state alone does not validate IP reachability or management-plane permission.

C:

Interface administrative services and administrator trusted hosts control where management sessions originate. In the reported case, physical link state alone does not validate IP reachability or management-plane permission.

D:

A managed cloud-native firewall requires explicit cloud policy and routing integration. In the reported case, physical link state alone does not validate IP reachability or management-plane permission.

Question 334

An enterprise FortiOS 7.6 administrator receives this change request: An administrator builds redundant tunnels but the remote peer accepts traffic only from one public WAN IP. Which action meets the requirement most directly?

  1. Add a route toward the IPsec interface and a policy allowing the intended local-to-remote traffic.
  2. Configure the peer-gateway definitions and source interface/identity for each redundant WAN tunnel explicitly.
  3. Verify the trusted certificate chain, peer identity and certificate validity on both ends.
  4. Configure hub routing/phase-two selectors and policies for approved spoke-to-spoke traffic, or supported direct mesh.

Explanation

Correct Answer

B:

Redundant IPsec WAN paths can require separate peer identity and endpoint authorization. Confirmation is obtained when both primary and backup WAN tunnels negotiate with their matching peer endpoints and credentials.

Incorrect Answers

A:

Routing and firewall authorization are separate requirements from IPsec negotiation. In the reported case, redundant IPsec WAN paths can require separate peer identity and endpoint authorization.

C:

Certificate-based IKE requires compatible trust and authenticated identities. In the reported case, redundant IPsec WAN paths can require separate peer identity and endpoint authorization.

D:

Hub connectivity alone does not imply automatic spoke-to-spoke reachability. In the reported case, redundant IPsec WAN paths can require separate peer identity and endpoint authorization.

Question 335

A controlled FortiOS 7.6 test is planned for this need: An administrator adds a policy for port2 to wan2 but the route table forwards through wan1. Which configuration should be implemented?

  1. Create an explicit narrow deny or remove an overly broad existing allow, retaining required IoT exceptions.
  2. Enable policy-based source NAT using the outgoing interface address for the matching LAN-to-wan1 policy.
  3. Inspect the VIP external interface/source filter, service mapping and matching firewall policy.
  4. Inspect the selected route and use the actual egress interface or adjust routing consistently with policy.

Explanation

Correct Answer

D:

Routing decides output path; policy matching must allow that effective source/output pair. Confirmation is obtained when the test flow's policy interfaces match the route-selected output and logs record acceptance.

Incorrect Answers

A:

Inter-VLAN traffic traversing the FortiGate is subject to effective ordered policy rules. In the reported case, routing decides output path; policy matching must allow that effective source/output pair.

B:

Source NAT changes the initiating source address independently of the route and firewall accept decision. In the reported case, routing decides output path; policy matching must allow that effective source/output pair.

C:

VIP filtering and firewall-policy fields may independently restrict DNAT access. In the reported case, routing decides output path; policy matching must allow that effective source/output pair.

Question 336

A production FortiGate environment has the following operational requirement: A web proxy application needs bidirectional service but only initiates new flows from the inside. Select the most defensible FortiOS action.

  1. Map the returned RADIUS group attribute to the configured FortiGate user group correctly.
  2. Allow the legitimate inside-to-outside initial flow and rely on stateful return handling.
  3. Place the appropriate deny rule before a broader allow and enable logging for denied traffic.
  4. Verify that user-IP mapping is current and applied to the matching firewall policy/logging context.

Explanation

Correct Answer

B:

The FortiGate tracks sessions, so established return traffic does not require an indiscriminate new-session rule. Confirmation is obtained when return packets for the established session are accepted without an unnecessary broad inbound policy.

Incorrect Answers

A:

Authentication success alone does not establish authorization to the correct group-based rule. In the reported case, the FortiGate tracks sessions, so established return traffic does not require an indiscriminate new-session rule.

C:

Effective policy ordering, not labels, governs first applicable forwarding decisions. In the reported case, the FortiGate tracks sessions, so established return traffic does not require an indiscriminate new-session rule.

D:

Log attribution depends on usable identity mappings, not the existence of an FSSO configuration page. In the reported case, the FortiGate tracks sessions, so established return traffic does not require an indiscriminate new-session rule.

Question 337

The following change is now configured: Inspect the selected route and use the actual egress interface or adjust routing consistently with policy. Which test result verifies the intended behavior?

  1. A freshly established session follows the updated policy while previously established state is interpreted correctly.
  2. New sessions selected through each WAN use the correct egress-compatible translated address.
  3. The test flow's policy interfaces match the route-selected output and logs record acceptance.
  4. An unauthenticated test flow receives the intended authentication challenge and then access is evaluated.

Explanation

Correct Answer

C:

Routing decides output path; policy matching must allow that effective source/output pair. The test should show that The test flow's policy interfaces match the route-selected output and logs record acceptance.

Incorrect Answers

A:

Stateful firewall sessions can retain state across policy edits, so new-connection testing matters. The stated configuration instead needs this result: the test flow's policy interfaces match the route-selected output and logs record acceptance.

B:

SNAT must be compatible with actual chosen outbound path for return traffic. The stated configuration instead needs this result: the test flow's policy interfaces match the route-selected output and logs record acceptance.

D:

Active authentication challenges the user when identity is needed, unlike purely IP-based policy matching. The stated configuration instead needs this result: the test flow's policy interfaces match the route-selected output and logs record acceptance.

Question 338

The observed FortiGate failure is: The operator searches an unfiltered log view and misses the target host's event. Which targeted repair should be performed?

  1. Apply source/time/action filters to the correct traffic-log type.
  2. Onboard the correct cloud-native firewall service and steer the workload traffic as designed.
  3. Correct NTP/time-zone configuration and re-run a timestamped log test.
  4. Resolve the memory pressure source and verify conserve-mode recovery.

Explanation

Correct Answer

A:

Log queries should preserve time and traffic direction context to avoid false incident conclusions. The remedy is Apply source/time/action filters to the correct traffic-log type.

Incorrect Answers

B:

A managed cloud-native firewall requires explicit cloud policy and routing integration. In the reported case, log queries should preserve time and traffic direction context to avoid false incident conclusions.

C:

Reliable incident timeline correlation requires consistent device and collector clocks. In the reported case, log queries should preserve time and traffic direction context to avoid false incident conclusions.

D:

Memory conserve mode affects session handling and may produce app symptoms despite valid routing. In the reported case, log queries should preserve time and traffic direction context to avoid false incident conclusions.

Question 339

The security team must implement a specific FortiGate control: Application-control signatures have expired and a newly released application is not identified. What configuration is the best starting point?

  1. Configure application control with a monitor/log action for the targeted application category.
  2. Verify FortiGuard Application Control entitlement, signature version and update connectivity.
  3. Correlate AV logs with web-filter logs and the session policy to identify the decisive control.
  4. Verify IPS update entitlement, database version and successful security content download.

Explanation

Correct Answer

B:

Signature currency and licensing influence application identification coverage. Confirmation is obtained when after signature update, traffic is classified according to the intended application policy.

Incorrect Answers

A:

Application-control monitoring can observe applications separately from blocking them. In the reported case, signature currency and licensing influence application identification coverage.

C:

Multiple security profiles may act on the same accepted connection and require correlated logs. In the reported case, signature currency and licensing influence application identification coverage.

D:

IPS protection for newly covered exploits depends on available updated signatures. In the reported case, signature currency and licensing influence application identification coverage.

Question 340

The engineers implemented this FortiGate change: Verify that user-IP mapping is current and applied to the matching firewall policy/logging context. Which observed result directly validates it?

  1. The signed-in workstation matches its authenticated group without a second explicit login.
  2. A new authenticated test session is logged with the correct username and policy ID.
  3. The guest scan matches the deny policy ID in logs without affecting the employee rule.
  4. New directory logons become visible in the FortiGate identity monitor without DC agents.

Explanation

Correct Answer

B:

Log attribution depends on usable identity mappings, not the existence of an FSSO configuration page. The test should show that A new authenticated test session is logged with the correct username and policy ID.

Incorrect Answers

A:

Passive identification can use trusted identity events without interrupting each user session. The stated configuration instead needs this result: a new authenticated test session is logged with the correct username and policy ID.

C:

Effective policy ordering, not labels, governs first applicable forwarding decisions. The stated configuration instead needs this result: a new authenticated test session is logged with the correct username and policy ID.

D:

Agentless AD event polling is an alternative logon collection mechanism with different prerequisites. The stated configuration instead needs this result: a new authenticated test session is logged with the correct username and policy ID.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests