McAfee Secure

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 38

Question 370

A controlled FortiOS 7.6 test is planned for this need: A user reaches the RADIUS service but FortiGate rejects a policy group membership match. Which configuration should be implemented?

  1. Map the returned RADIUS group attribute to the configured FortiGate user group correctly.
  2. Review collector group filters and the FortiGate remote group mapping to directory groups.
  3. Review policy hit counts, traffic logs and dependencies, then replace stale broad rules with least-privilege objects.
  4. Inspect authentication debug/log events and the later identity-group and policy match separately.

Explanation

Correct Answer

A:

Authentication success alone does not establish authorization to the correct group-based rule. Confirmation is obtained when a test RADIUS response places the user in the intended group and the protected policy matches.

Incorrect Answers

B:

User-to-group identity must be matched consistently between domain, collector and policy. In the reported case, authentication success alone does not establish authorization to the correct group-based rule.

C:

Policy hygiene requires evidence-based narrowing, because an old allow can bypass more specific new controls. In the reported case, authentication success alone does not establish authorization to the correct group-based rule.

D:

Credential checks, user identity mapping and traffic authorization are separate steps. In the reported case, authentication success alone does not establish authorization to the correct group-based rule.

Question 371

A production FortiGate environment has the following operational requirement: A deployment requires audit for both passed and dropped traffic to a sensitive subnet. Select the most defensible FortiOS action.

  1. Modify the matching central SNAT rule and verify its precedence and address mapping.
  2. Place the appropriate deny rule before a broader allow and enable logging for denied traffic.
  3. Place a narrowly scoped deny before the VIP accept policy and verify match-vip is enabled on that deny policy, leaving authorized VIP sources permitted.
  4. Enable suitable traffic logging on accept and deny policies with a central log destination.

Explanation

Correct Answer

D:

Traffic log visibility depends on each effective policy and destination logging configuration. Confirmation is obtained when controlled accepted and denied flows both appear with correct policy IDs and actions.

Incorrect Answers

A:

Central NAT separates translation rules from firewall policy acceptance. In the reported case, traffic log visibility depends on each effective policy and destination logging configuration.

B:

Effective policy ordering, not labels, governs first applicable forwarding decisions. In the reported case, traffic log visibility depends on each effective policy and destination logging configuration.

C:

FortiGate VIP-related accept policies can take precedence over generic deny rules; match-vip is a deny-policy-specific setting that makes the deny match traffic destined for a VIP. In the reported case, traffic log visibility depends on each effective policy and destination logging configuration.

Question 372

The observed FortiGate failure is: The sensor uses allow without logging, leaving security staff unaware of use. Which targeted repair should be performed?

  1. Configure the web-filter safe-search feature and confirm endpoint/browser behavior.
  2. Enable monitor/log behavior for the specified signature.
  3. Set the relevant archive inspection behavior and monitor detected limitations.
  4. Use a monitor profile with logging, then review usage before enforcement.

Explanation

Correct Answer

B:

Application-control policy can collect usage evidence before active enforcement. The remedy is Enable monitor/log behavior for the specified signature.

Incorrect Answers

A:

Search content restrictions belong to supported web-filter policy settings, not malware scanning. In the reported case, application-control policy can collect usage evidence before active enforcement.

C:

An antivirus engine cannot reliably inspect encrypted archive content without usable decryption information. In the reported case, application-control policy can collect usage evidence before active enforcement.

D:

Application-control monitoring can observe applications separately from blocking them. In the reported case, application-control policy can collect usage evidence before active enforcement.

Question 373

A production FortiGate environment has the following operational requirement: A security administrator needs direct access to the secondary member for diagnosis. Select the most defensible FortiOS action.

  1. Configure the supported reserved HA management interface per member with suitable routing and access.
  2. Restrict administrative access on the management interface and use an approved trusted-host range for administrators.
  3. Configure the DHCP server on the correct VLAN interface with a subnet-matched lease pool and DNS, explicitly advertising the same-subnet upstream router as the clients' default gateway.
  4. Review heartbeat quality, monitored ports and documented HA election settings before changing priority.

Explanation

Correct Answer

A:

HA members can require independent management addresses that are not the shared cluster interface. Confirmation is obtained when the standby unit is directly manageable without altering the production cluster interface.

Incorrect Answers

B:

Interface administrative services and administrator trusted hosts control where management sessions originate. In the reported case, HA members can require independent management addresses that are not the shared cluster interface.

C:

The FortiGate DHCP scope can advertise an explicit default gateway; the nominated external router must be reachable on the client's link, and allocating an IP alone does not establish forwarding. In the reported case, HA members can require independent management addresses that are not the shared cluster interface.

D:

HA elections depend on link and member health; arbitrary priority edits do not fix broken heartbeat. In the reported case, HA members can require independent management addresses that are not the shared cluster interface.

Question 374

An operational test failed because: The LDAP bind succeeds but user group lookup is misconfigured so no access is granted. What remediation addresses the underlying cause?

  1. Correct LDAP base DN/group mapping and retest group-based authentication.
  2. Repair FSSO identity mapping and confirm the correct policy uses the user context.
  3. Correct the remote-group match and verify the identity record.
  4. Configure the correct VIP/service mapping and restrict the WAN-to-DMZ policy.

Explanation

Correct Answer

A:

LDAP integration needs group mapping in addition to reaching the directory server. The remedy is Correct LDAP base DN/group mapping and retest group-based authentication.

Incorrect Answers

B:

Log attribution depends on usable identity mappings, not the existence of an FSSO configuration page. In the reported case, LDAP integration needs group mapping in addition to reaching the directory server.

C:

Authentication success alone does not establish authorization to the correct group-based rule. In the reported case, LDAP integration needs group mapping in addition to reaching the directory server.

D:

A VIP performs DNAT; a separate appropriately scoped firewall policy must permit the translated service. In the reported case, LDAP integration needs group mapping in addition to reaching the directory server.

Question 375

During FortiOS 7.6 root-cause analysis, an engineer finds: Both firewalls lose all heartbeat and LAN connectivity when a single switch fails. Which change repairs the fault?

  1. Use a filtered debug flow trace to identify the actual deny stage.
  2. Configure HA interface monitoring for the business-critical path.
  3. Correct interface addressing and permitted admin-access settings only on the approved management path.
  4. Correct the cabling design to avoid a shared single point of failure.

Explanation

Correct Answer

D:

High availability requires path diversity as well as redundant appliances. The remedy is Correct the cabling design to avoid a shared single point of failure.

Incorrect Answers

A:

Packet forwarding diagnosis should start with the effective policy and route path. In the reported case, high availability requires path diversity as well as redundant appliances.

B:

HA link monitoring can trigger failover even when the appliance itself stays online. In the reported case, high availability requires path diversity as well as redundant appliances.

C:

Physical link state alone does not validate IP reachability or management-plane permission. In the reported case, high availability requires path diversity as well as redundant appliances.

Question 376

An auditor must validate the FortiOS configuration: Use a policy/NAT design avoiding SNAT on the internal path while retaining any needed DNAT. Which result demonstrates the requirement was met?

  1. The trace identifies an unmatched source/service or deny policy before any DNS change.
  2. The signed-in workstation matches its authenticated group without a second explicit login.
  3. The backend logs the intended client source and replies route symmetrically.
  4. New sessions selected through each WAN use the correct egress-compatible translated address.

Explanation

Correct Answer

C:

Not every permitted flow requires source NAT; visibility and return routes can require preserving addresses. The test should show that The backend logs the intended client source and replies route symmetrically.

Incorrect Answers

A:

Packet arrival with a known destination separates policy failure from name-resolution failure. The stated configuration instead needs this result: the backend logs the intended client source and replies route symmetrically.

B:

Passive identification can use trusted identity events without interrupting each user session. The stated configuration instead needs this result: the backend logs the intended client source and replies route symmetrically.

D:

SNAT must be compatible with actual chosen outbound path for return traffic. The stated configuration instead needs this result: the backend logs the intended client source and replies route symmetrically.

Question 377

A change ticket for a FortiOS 7.6 device states: Administrators want users to see a captive portal only when they open a protected resource. Which implementation should be selected?

  1. Bind an appropriate recurring schedule to the narrow contractor access firewall policy.
  2. Use an identity-based firewall policy with active authentication for that user population.
  3. Verify that user-IP mapping is current and applied to the matching firewall policy/logging context.
  4. Verify user-to-IP mapping freshness and the active authentication/session identity records.

Explanation

Correct Answer

B:

Active authentication challenges the user when identity is needed, unlike purely IP-based policy matching. Confirmation is obtained when an unauthenticated test flow receives the intended authentication challenge and then access is evaluated.

Incorrect Answers

A:

Firewall policy schedules participate in effective rule matching. In the reported case, active authentication challenges the user when identity is needed, unlike purely IP-based policy matching.

C:

Log attribution depends on usable identity mappings, not the existence of an FSSO configuration page. In the reported case, active authentication challenges the user when identity is needed, unlike purely IP-based policy matching.

D:

Identity-to-IP association matters for identity policies that match forwarded sessions. In the reported case, active authentication challenges the user when identity is needed, unlike purely IP-based policy matching.

Question 378

During a network-security review the following gap is identified: A firewall uses central SNAT but an engineer edits per-policy NAT options expecting a change. What should the team configure?

  1. Enable policy-based source NAT using the outgoing interface address for the matching LAN-to-wan1 policy.
  2. Modify the matching central SNAT rule and verify its precedence and address mapping.
  3. Inspect rule order, actual addresses and ports, then place the intended specific rule before the generic rule.
  4. Verify that user-IP mapping is current and applied to the matching firewall policy/logging context.

Explanation

Correct Answer

B:

Central NAT separates translation rules from firewall policy acceptance. Confirmation is obtained when a new session's translated address follows the central policy, with per-policy settings not relied on.

Incorrect Answers

A:

Source NAT changes the initiating source address independently of the route and firewall accept decision. In the reported case, central NAT separates translation rules from firewall policy acceptance.

C:

Different security profiles apply based on the single effective matching policy. In the reported case, central NAT separates translation rules from firewall policy acceptance.

D:

Log attribution depends on usable identity mappings, not the existence of an FSSO configuration page. In the reported case, central NAT separates translation rules from firewall policy acceptance.

Question 379

During a network-security review the following gap is identified: A policy that should isolate an IoT VLAN allows traffic to the accounting subnet. What should the team configure?

  1. Create an explicit narrow deny or remove an overly broad existing allow, retaining required IoT exceptions.
  2. Place the appropriate deny rule before a broader allow and enable logging for denied traffic.
  3. Install the required supported DC agent on each monitored controller and route events to the collector.
  4. Add a static one-to-one VIP and adjust the matching inbound firewall policy.

Explanation

Correct Answer

A:

Inter-VLAN traffic traversing the FortiGate is subject to effective ordered policy rules. Confirmation is obtained when ioT-to-accounting attempts match a deny while approved management/telemetry remains functional.

Incorrect Answers

B:

Effective policy ordering, not labels, governs first applicable forwarding decisions. In the reported case, inter-VLAN traffic traversing the FortiGate is subject to effective ordered policy rules.

C:

DC agent mode needs the logon source coverage before group maps can be trusted. In the reported case, inter-VLAN traffic traversing the FortiGate is subject to effective ordered policy rules.

D:

Static VIPs map external destinations to internal addresses without renumbering the backend. In the reported case, inter-VLAN traffic traversing the FortiGate is subject to effective ordered policy rules.

Question 380

During a network-security review the following gap is identified: A voice application needs the lowest-latency WAN link while file transfers can use other links. What should the team configure?

  1. Verify the measured latency threshold and which health-check SLA map the application rule requires.
  2. Create an application-matching SD-WAN rule with a best-quality strategy and measured latency SLA.
  3. Keep the more specific 10.70.40.0/24 route through port3 for the branch destination.
  4. Configure supported ECMP routing with eligible equal-cost next hops and suitable session handling.

Explanation

Correct Answer

B:

SD-WAN path selection can evaluate application and link quality separately from security policy. Confirmation is obtained when new voice flows use the suitable low-latency link under monitored conditions.

Incorrect Answers

A:

Link reachability and satisfaction of a service quality target are different statuses. In the reported case, SD-WAN path selection can evaluate application and link quality separately from security policy.

C:

Longest destination prefix match identifies the most specific eligible route before a generic default. In the reported case, SD-WAN path selection can evaluate application and link quality separately from security policy.

D:

Equal-cost multipath requires compatible route selection parameters; packet-level randomness is not implied. In the reported case, SD-WAN path selection can evaluate application and link quality separately from security policy.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests