McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 7

Question 60

At the Lakehaven managed-network provider, an unmanaged workstation marks large file transfers as high priority and overwhelms voice traffic. Which ongoing control best prevents this issue from recurring?

  1. Audit DSCP trust rules when access device roles change
  2. Audit trusted and untrusted traffic classes after trunk changes
  3. Review trunk allowed VLAN sets when new segments are deployed
  4. Check ISL optics firmware support before network extensions

Explanation

Correct Answer

A:

The continuing safeguard is to audit DSCP trust rules when access device roles change. It helps avoid the original condition: accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues.

Incorrect Answers

B:

Audit trusted and untrusted traffic classes after trunk changes. That safeguard would help prevent recurrence of: A later hop can undo correct ingress classifications and move packets to the wrong class. The risk being reviewed here is instead: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. The matching ongoing control is: Audit DSCP trust rules when access device roles change.

C:

Review trunk allowed VLAN sets when new segments are deployed is not the primary recurring safeguard for this problem. The team should audit DSCP trust rules when access device roles change. For the Lakehaven managed-network provider, the direct corrective action is to establish a trusted QoS marking boundary and classify or remark untrusted ingress traffic.

D:

Check ISL optics firmware support before network extensions. That safeguard would help prevent recurrence of: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. The risk being reviewed here is instead: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. The matching ongoing control is: Audit DSCP trust rules when access device roles change.

Question 61

At the Westwick network modernization program, a service VLAN has tagged frames carrying priority values that differ from the switch egress queue mapping. Which implementation choice best addresses the situation?

  1. Establish a trusted QoS marking boundary and classify or remark untrusted ingress traffic
  2. Validate supported FortiLink topology and loop prevention before activating the ring
  3. Apply supported protocol-based VLAN rules only after confirming hardware capability and required frame matches
  4. Map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues

Explanation

Correct Answer

D:

The primary failure mode is that an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. The proposed action directly fixes it by requiring the team to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues; afterward, verify that tagged test traffic enters the intended egress queue under load.

Incorrect Answers

A:

This alternative would be suitable where accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. It does not by itself resolve the need to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues. For the Westwick network modernization program, the direct corrective action is to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues.

B:

Validate supported FortiLink topology and loop prevention before activating the ring addresses a different kind of problem: redundant physical links need controlled forwarding to prevent Layer 2 loops. Here the reported weakness is that an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. For the Westwick network modernization program, the direct corrective action is to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues.

C:

The option addresses the separate situation where simple native VLAN handling cannot distinguish service traffic by defined protocol selectors. For this case, the more appropriate response is to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues. For the Westwick network modernization program, the direct corrective action is to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues.

Question 62

At the Westwick network modernization program, a service VLAN has tagged frames carrying priority values that differ from the switch egress queue mapping. What risk should the team identify as the primary issue?

  1. An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy
  2. A later hop can undo correct ingress classifications and move packets to the wrong class
  3. Unexpected root election creates suboptimal forwarding paths and fragile redundancy
  4. Physical connector compatibility does not guarantee optical transmitter receiver compatibility

Explanation

Correct Answer

A:

The situation shows that an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy, rather than merely a monitoring or presentation issue. Remediation is to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues.

Incorrect Answers

B:

A later hop can undo correct ingress classifications and move packets to the wrong class. That may occur elsewhere, but the evidence at the Westwick network modernization program instead points to the fact that an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy.

C:

The offered alternative is: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. It addresses this separate failure mode: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. In the current case, the observed mechanism is: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. The keyed action, An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy., targets that condition more directly.

D:

Physical connector compatibility does not guarantee optical transmitter receiver compatibility. That is not the mechanism that accounts for the stated failure at the Westwick network modernization program.

Question 63

At the Westwick network modernization program, a service VLAN has tagged frames carrying priority values that differ from the switch egress queue mapping. What is the strongest acceptance test for this change?

  1. A mixed-load test preserves protected video quality and acceptable best-effort throughput
  2. The analyzer receives only the intended mirrored traffic with correct packet headers
  3. Tagged test traffic enters the intended egress queue under load
  4. The FortiSwitch estate remains authorized and reachable after a controlled HA failover

Explanation

Correct Answer

C:

This tests the real business behavior: tagged test traffic enters the intended egress queue under load. It specifically checks whether the risk that an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy has been reduced.

Incorrect Answers

A:

A mixed-load test preserves protected video quality and acceptable best-effort throughput. That result would test a control for this other failure: Overly broad strict priority classification can prevent lower queues receiving service. The question instead requires evidence for: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. The direct outcome to verify is: Tagged test traffic enters the intended egress queue under load.

B:

At the Westwick network modernization program, a result about fortiswitch port mirroring destination would not show that the team corrected the failure where an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy.

D:

The offered observation is: The FortiSwitch estate remains authorized and reachable after a controlled HA failover. It would support the separate mechanism: HA failover can strand managed switches when the new active FortiGate has no valid management path. In this case the decisive dependency is: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. The original keyed verification is: Tagged test traffic enters the intended egress queue under load.

Question 64

At the Westwick network modernization program, a service VLAN has tagged frames carrying priority values that differ from the switch egress queue mapping. Which setting or practice should be reviewed in future?

  1. Review guest rate limits against observed demand and business commitments
  2. Monitor MAC-based classification matches after equipment replacement
  3. Monitor DHCP relay endpoints after server migrations
  4. Recheck CoS to queue mappings after port profile updates

Explanation

Correct Answer

D:

For the Westwick network modernization program, this maintenance action preserves the fix: recheck CoS to queue mappings after port profile updates. It should be revisited as the workload evolves.

Incorrect Answers

A:

Review guest rate limits against observed demand and business commitments is not the primary recurring safeguard for this problem. The team should recheck CoS to queue mappings after port profile updates. For the Westwick network modernization program, the direct corrective action is to map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues.

B:

Monitor MAC-based classification matches after equipment replacement. That safeguard would help prevent recurrence of: A MAC classification mismatch can override the VLAN intended for a known endpoint. The risk being reviewed here is instead: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. The matching ongoing control is: Recheck CoS to queue mappings after port profile updates.

C:

The suggested preventive check is: Monitor DHCP relay endpoints after server migrations. Its technical scope concerns: DHCP broadcasts do not cross routed interfaces without a relay or alternate server path. This question asks how to sustain control over: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. The more targeted safeguard is: Recheck CoS to queue mappings after port profile updates.

Question 65

At the Kingsford LAN operations group, new IP phones boot into the data VLAN because they never receive the intended voice network policy. Which corrective action best meets the requirement?

  1. Map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues
  2. Configure supported VLAN interfaces and necessary routes on a model with the required routing capability
  3. Check FortiLink-supported STP settings and controller management expectations before overriding local ports
  4. Enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports

Explanation

Correct Answer

D:

For the Kingsford LAN operations group, the appropriate correction is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports. The decisive reason is that a phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state; acceptance evidence is that a test phone discovers the voice VLAN and obtains its voice network address.

Incorrect Answers

A:

The option addresses the separate situation where an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. For this case, the more appropriate response is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports. For the Kingsford LAN operations group, the direct corrective action is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

B:

The offered action is: Configure supported VLAN interfaces and necessary routes on a model with the required routing capability. It is associated with this separate technical condition: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The actual incident concerns a different dependency: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The corresponding change is: Enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

C:

Check FortiLink-supported STP settings and controller management expectations before overriding local ports can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports. For the Kingsford LAN operations group, the direct corrective action is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

Question 66

At the Kingsford LAN operations group, new IP phones boot into the data VLAN because they never receive the intended voice network policy. Which underlying issue most directly explains this situation?

  1. An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy
  2. Different STP variants can interoperate at boundaries without sharing every internal instance decision
  3. A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state
  4. Different MSTP region parameters change how peers interpret instances and topology

Explanation

Correct Answer

C:

The strongest explanation is that a phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. This accounts for the outcome and supports the action to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

Incorrect Answers

A:

The offered principle is: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. In the source material it is associated with: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. This case has a different controlling cause: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. Its keyed mechanism is: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state.

B:

Different STP variants can interoperate at boundaries without sharing every internal instance decision. That is not the mechanism that accounts for the stated failure at the Kingsford LAN operations group.

D:

Although different MSTP region parameters change how peers interpret instances and topology, the presented symptoms do not support that as the primary cause; they indicate that a phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. For the Kingsford LAN operations group, the direct corrective action is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

Question 67

At the Kingsford LAN operations group, new IP phones boot into the data VLAN because they never receive the intended voice network policy. What evidence would justify considering this concern addressed?

  1. Both test phones use the same approved voice VLAN and negotiated priority
  2. A boundary failure test reconverges safely with documented root behavior
  3. A test phone discovers the voice VLAN and obtains its voice network address
  4. Observed learned-address counts remain within supported limits and flooding falls

Explanation

Correct Answer

C:

At the Kingsford LAN operations group, evidence that a test phone discovers the voice VLAN and obtains its voice network address directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

Both test phones use the same approved voice VLAN and negotiated priority. That result would test a control for this other failure: Inconsistent advertised application policies can cause mismatched VLAN or QoS markings. The question instead requires evidence for: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The direct outcome to verify is: A test phone discovers the voice VLAN and obtains its voice network address.

B:

The offered observation is: A boundary failure test reconverges safely with documented root behavior. It would support the separate mechanism: Different STP variants can interoperate at boundaries without sharing every internal instance decision. In this case the decisive dependency is: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The original keyed verification is: A test phone discovers the voice VLAN and obtains its voice network address.

D:

The offered observation is: Observed learned-address counts remain within supported limits and flooding falls. It would support the separate mechanism: Excessive unique source addresses may strain hardware learning resources. In this case the decisive dependency is: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The original keyed verification is: A test phone discovers the voice VLAN and obtains its voice network address.

Question 68

At the Kingsford LAN operations group, new IP phones boot into the data VLAN because they never receive the intended voice network policy. How should the organization sustain the improvement?

  1. Maintain an inventory of endpoint discovery and policy capabilities
  2. Review spanning tree boundaries during equipment refreshes
  3. Require controller-aware review for managed STP configuration changes
  4. Monitor LLDP-MED policy advertisements after phone or switch updates

Explanation

Correct Answer

D:

The needed prevention is to monitor LLDP-MED policy advertisements after phone or switch updates. It directly sustains the original change to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

Incorrect Answers

A:

The suggested preventive check is: Maintain an inventory of endpoint discovery and policy capabilities. Its technical scope concerns: Ordinary LLDP support does not prove an endpoint applies LLDP-MED network policy TLVs. This question asks how to sustain control over: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The more targeted safeguard is: Monitor LLDP-MED policy advertisements after phone or switch updates.

B:

Review spanning tree boundaries during equipment refreshes. That safeguard would help prevent recurrence of: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The risk being reviewed here is instead: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The matching ongoing control is: Monitor LLDP-MED policy advertisements after phone or switch updates.

C:

That routine supports stp fortilink managed topology, but the relevant ongoing risk requires the team to monitor LLDP-MED policy advertisements after phone or switch updates. For the Kingsford LAN operations group, the direct corrective action is to enable and verify supported LLDP-MED voice VLAN advertisements on the appropriate FortiSwitch ports.

Question 69

At the Yorkport regional network integrator, a cabling team believes an uplink connects to switch A although neighbor discovery identifies switch B. Which approach best resolves the described issue?

  1. Rebalance supported scheduling weights and priority allocation to protect necessary traffic classes
  2. Use LLDP neighbor details and physical documentation to correct the port to peer mapping
  3. Run supported cable diagnostics and repair damaged or miswired copper pairs
  4. Create and authorize the required FortiGate VLAN interface and corresponding firewall policy

Explanation

Correct Answer

B:

For the Yorkport regional network integrator, the appropriate correction is to use LLDP neighbor details and physical documentation to correct the port to peer mapping. The decisive reason is that port labels may become stale when cables move and must be reconciled with observed neighbors; acceptance evidence is that observed LLDP chassis and port identifiers match the verified cable map.

Incorrect Answers

A:

Rebalance supported scheduling weights and priority allocation to protect necessary traffic classes can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use LLDP neighbor details and physical documentation to correct the port to peer mapping. For the Yorkport regional network integrator, the direct corrective action is to use LLDP neighbor details and physical documentation to correct the port to peer mapping.

C:

This alternative would be suitable where gigabit copper Ethernet needs correctly functioning cable pairs and termination. It does not by itself resolve the need to use LLDP neighbor details and physical documentation to correct the port to peer mapping. For the Yorkport regional network integrator, the direct corrective action is to use LLDP neighbor details and physical documentation to correct the port to peer mapping.

D:

Create and authorize the required FortiGate VLAN interface and corresponding firewall policy addresses a different kind of problem: layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. Here the reported weakness is that port labels may become stale when cables move and must be reconciled with observed neighbors. For the Yorkport regional network integrator, the direct corrective action is to use LLDP neighbor details and physical documentation to correct the port to peer mapping.

Question 70

At the Yorkport regional network integrator, a cabling team believes an uplink connects to switch A although neighbor discovery identifies switch B. Which explanation best accounts for the concern?

  1. Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts
  2. A MAC classification mismatch can override the VLAN intended for a known endpoint
  3. Port labels may become stale when cables move and must be reconciled with observed neighbors
  4. Redundant physical links need controlled forwarding to prevent Layer 2 loops

Explanation

Correct Answer

C:

The situation shows that port labels may become stale when cables move and must be reconciled with observed neighbors, rather than merely a monitoring or presentation issue. Remediation is to use LLDP neighbor details and physical documentation to correct the port to peer mapping.

Incorrect Answers

A:

The offered principle is: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. In the source material it is associated with: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. This case has a different controlling cause: Port labels may become stale when cables move and must be reconciled with observed neighbors. Its keyed mechanism is: Port labels may become stale when cables move and must be reconciled with observed neighbors.

B:

Although a MAC classification mismatch can override the VLAN intended for a known endpoint, the presented symptoms do not support that as the primary cause; they indicate that port labels may become stale when cables move and must be reconciled with observed neighbors. For the Yorkport regional network integrator, the direct corrective action is to use LLDP neighbor details and physical documentation to correct the port to peer mapping.

D:

Redundant physical links need controlled forwarding to prevent Layer 2 loops. That may occur elsewhere, but the evidence at the Yorkport regional network integrator instead points to the fact that port labels may become stale when cables move and must be reconciled with observed neighbors.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests