McAfee Secure

Huawei H12-811 Bundle

Exam Code: H12-811

Exam Name HCIA-Datacom V1.0

Certification Provider: Huawei

Corresponding Certification: HCIA-Datacom

Huawei H12-811 Bundle $25.00

100% Huawei H12-811 Guaranteed Success With Testking Training Materials

Get Real H12-811 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    H12-811 Questions & Answers

    445 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual H12-811 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • H12-811 Video Course

    H12-811 Training Course

    40 Video Lectures

    H12-811 Video Course is developed by Huawei Professionals to help you pass the H12-811 exam.

    Description

    This course will improve your knowledge and skills required to pass HCIA-Datacom V1.0 exam.

HCIA-Datacom V1.0 (H12-811) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    445 Questions

    $124.99
  • H12-811 Video Course

    Training Course

    40 Video Lectures

    $39.99

Huawei H12-811 Practice Test 44

Question 430

During an independent network handover at the River Mill branch of Aster Point Civic Trust, the monitored service is library catalog for clients in 10.102.20.0/24; incident reference is DC-8824. The on-duty analyst documents this symptom before proposing any configuration: Small packets reach a VPN destination, but larger transfers stall when an intermediate link has a smaller path MTU and needed ICMP feedback is filtered. The branch requires an auditable explanation, a narrowly staged change, and a rollback plan that preserves its working services. Which ongoing operational check is most relevant to recognizing recurrence of this failure?

  1. For a monitoring check at River Mill: Monitor RA receipt, router lifetime and IPv6 default-route disappearance.
  2. For a monitoring check at River Mill: Track retransmission spikes, MTU-related ICMP messages and tunnel overhead changes.
  3. For a monitoring check at River Mill: Track bad DHCP gateway options and first-hop unreachability reports.
  4. For a monitoring check at River Mill: Track per-next-hop utilization and flow-level path imbalance.

Answer and explanations

A.

Monitor RA receipt, router lifetime and IPv6 default-route disappearance. This alternative addresses a different issue (ipv6 link-local gateway). The reported case is: During an independent network handover at the River Mill branch of Aster Point Civic Trust, the monitored service is library catalog for clients in 10.102.20.0/24; incident reference is DC-8824. The decisive distinction is: Track retransmission spikes, MTU-related ICMP messages and tunnel overhead changes.

B.

The decisive evidence is: During an independent network handover at the River Mill branch of Aster Point Civic Trust, the monitored service is library catalog for clients in 10.102.20.0/24; incident reference is DC-8824. Track retransmission spikes, MTU-related ICMP messages and tunnel overhead changes.

C.

Track bad DHCP gateway options and first-hop unreachability reports. The observed condition is: During an independent network handover at the River Mill branch of Aster Point Civic Trust, the monitored service is library catalog for clients in 10.102.20.0/24; incident reference is DC-8824. This alternative addresses a different issue (incorrect default gateway). The decisive distinction is: Track retransmission spikes, MTU-related ICMP messages and tunnel overhead changes.

D.

This alternative addresses a different issue (ecmp next-hop behavior). The option would address: Track per-next-hop utilization and flow-level path imbalance. The scenario instead reports: During an independent network handover at the River Mill branch of Aster Point Civic Trust, the monitored service is library catalog for clients in 10.102.20.0/24; incident reference is DC-8824.

Question 431

At Galen Peak Software in Whitehaven, engineers maintain a small Huawei VRP-based wired/WLAN campus for financial reconciliation, with client segment 10.91.44.0/24. An approved maintenance window follows change DC-8836. The change team records this observable condition: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. They can run a controlled laboratory replay and must leave unrelated campuses and production authentication policies unchanged. What explanation best fits the observed network failure, rather than a merely possible separate fault?

  1. For DC-8836 at Whitehaven, the technical interpretation is: OSPF adjacency is blocked by inconsistent area membership on the shared link.
  2. For DC-8836 at Whitehaven, the technical interpretation is: OSPF requires unique router identifiers within the routing domain.
  3. For DC-8836 at Whitehaven, the technical interpretation is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.
  4. For DC-8836 at Whitehaven, the technical interpretation is: The connected prefix is not being originated into the intended OSPF area or route filters suppress it.

Answer and explanations

A.

This alternative addresses a different issue (ospf neighbor area mismatch). OSPF adjacency is blocked by inconsistent area membership on the shared link. In the reported case: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.

B.

OSPF requires unique router identifiers within the routing domain. The observed condition is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ospf router id uniqueness). The decisive distinction is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.

C.

Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path. The reported evidence is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. Confirm the affected layer or service before applying a configuration change.

D.

The connected prefix is not being originated into the intended OSPF area or route filters suppress it. This alternative addresses a different issue (ospf advertisement missing). The reported case is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.

Question 432

At Galen Peak Software in Whitehaven, engineers maintain a small Huawei VRP-based wired/WLAN campus for financial reconciliation, with client segment 10.91.44.0/24. An approved maintenance window follows change DC-8836. The change team records this observable condition: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. They can run a controlled laboratory replay and must leave unrelated campuses and production authentication policies unchanged. Which precise corrective change addresses the demonstrated failure with minimal unrelated disruption?

  1. For a controlled repair of financial reconciliation in Whitehaven: Assign distinct router IDs and apply the product-supported OSPF process restart precautions during a change window.
  2. For a controlled repair of financial reconciliation in Whitehaven: Test several distinct flows and validate both forwarding next hops instead of expecting one flow to span both paths.
  3. For a controlled repair of financial reconciliation in Whitehaven: Permit required ICMPv6 Neighbor Solicitation and Advertisement messages within the intended local segment.
  4. For a controlled repair of financial reconciliation in Whitehaven: Validate hello/dead detection or supported fast failure sensing against the change standard, then verify alternate next-hop availability.

Answer and explanations

A.

For a controlled repair of financial reconciliation in Whitehaven: Assign distinct router IDs and apply the product-supported OSPF process restart precautions during a change window. The observed condition is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ospf router id uniqueness). The decisive distinction is: For a controlled repair of financial reconciliation in Whitehaven: Validate hello/dead detection or supported fast failure sensing against the change standard, then verify alternate next-hop availability.

B.

This alternative addresses a different issue (ecmp next-hop behavior). The option would address: For a controlled repair of financial reconciliation in Whitehaven: Test several distinct flows and validate both forwarding next hops instead of expecting one flow to span both paths. The scenario instead reports: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

C.

For a controlled repair of financial reconciliation in Whitehaven: Permit required ICMPv6 Neighbor Solicitation and Advertisement messages within the intended local segment. This alternative addresses a different issue (ipv6 neighbor discovery). The reported case is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: For a controlled repair of financial reconciliation in Whitehaven: Validate hello/dead detection or supported fast failure sensing against the change standard, then verify alternate next-hop availability.

D.

A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. That points to this explanation: For a controlled repair of financial reconciliation in Whitehaven: Validate hello/dead detection or supported fast failure sensing against the change standard, then verify alternate next-hop availability. Validate it through the controlled case because Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy.

Question 433

At Galen Peak Software in Whitehaven, engineers maintain a small Huawei VRP-based wired/WLAN campus for financial reconciliation, with client segment 10.91.44.0/24. An approved maintenance window follows change DC-8836. The change team records this observable condition: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. They can run a controlled laboratory replay and must leave unrelated campuses and production authentication policies unchanged. Which acceptance evidence most directly demonstrates that the proposed targeted correction works?

  1. For acceptance review of Whitehaven change DC-8836: After a supervised link failure the stale route withdraws and permitted traffic uses the expected backup within the measured objective.
  2. For acceptance review of Whitehaven change DC-8836: Remote routing tables contain the expected exact loopback and reach it through the OSPF next hop.
  3. For acceptance review of Whitehaven change DC-8836: The host has an IPv6 default route using the router's link-local next hop and reaches an allowed remote prefix.
  4. For acceptance review of Whitehaven change DC-8836: An off-subnet traceroute begins at the intended gateway and a permitted application completes.

Answer and explanations

A.

After a supervised link failure the stale route withdraws and permitted traffic uses the expected backup within the measured objective. This addresses the decisive observation: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

B.

Remote routing tables contain the expected exact loopback and reach it through the OSPF next hop. This alternative addresses a different issue (would not prove the reported issue was corrected). The reported case is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: After a supervised link failure the stale route withdraws and permitted traffic uses the expected backup within the measured objective.

C.

This alternative addresses a different issue (would not prove the reported issue was corrected). The host has an IPv6 default route using the router's link-local next hop and reaches an allowed remote prefix. In the reported case: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

D.

An off-subnet traceroute begins at the intended gateway and a permitted application completes. The observed condition is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (would not prove the reported issue was corrected). The decisive distinction is: After a supervised link failure the stale route withdraws and permitted traffic uses the expected backup within the measured objective.

Question 434

At Galen Peak Software in Whitehaven, engineers maintain a small Huawei VRP-based wired/WLAN campus for financial reconciliation, with client segment 10.91.44.0/24. An approved maintenance window follows change DC-8836. The change team records this observable condition: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. They can run a controlled laboratory replay and must leave unrelated campuses and production authentication policies unchanged. Which remaining limitation should the engineer explicitly record even after the targeted repair?

  1. For the Whitehaven network design record: Symmetric routing does not by itself repair application-side listener or certificate failures.
  2. For the Whitehaven network design record: Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy.
  3. For the Whitehaven network design record: An IPv6 next hop can be reachable while destination return routing is still missing.
  4. For the Whitehaven network design record: A full neighbor relationship does not guarantee that every required prefix is advertised or reachable.

Answer and explanations

A.

For the Whitehaven network design record: Symmetric routing does not by itself repair application-side listener or certificate failures. This alternative addresses a different issue (return path symmetry). The reported case is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: For the Whitehaven network design record: Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy.

B.

The decisive evidence is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. For the Whitehaven network design record: Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy.

C.

For the Whitehaven network design record: An IPv6 next hop can be reachable while destination return routing is still missing. The observed condition is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ipv6 static route next hop). The decisive distinction is: For the Whitehaven network design record: Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy.

D.

This alternative addresses a different issue (ospf neighbor area mismatch). The option would address: For the Whitehaven network design record: A full neighbor relationship does not guarantee that every required prefix is advertised or reachable. The scenario instead reports: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

Question 435

At Galen Peak Software in Whitehaven, engineers maintain a small Huawei VRP-based wired/WLAN campus for financial reconciliation, with client segment 10.91.44.0/24. An approved maintenance window follows change DC-8836. The change team records this observable condition: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. They can run a controlled laboratory replay and must leave unrelated campuses and production authentication policies unchanged. Which ongoing operational check is most relevant to recognizing recurrence of this failure?

  1. For a monitoring check at Whitehaven: Monitor RA receipt, router lifetime and IPv6 default-route disappearance.
  2. For a monitoring check at Whitehaven: Track bad DHCP gateway options and first-hop unreachability reports.
  3. For a monitoring check at Whitehaven: Measure convergence intervals and route flap frequency during fault drills.
  4. For a monitoring check at Whitehaven: Track per-next-hop utilization and flow-level path imbalance.

Answer and explanations

A.

This alternative addresses a different issue (ipv6 link-local gateway). Monitor RA receipt, router lifetime and IPv6 default-route disappearance. In the reported case: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: Measure convergence intervals and route flap frequency during fault drills.

B.

Track bad DHCP gateway options and first-hop unreachability reports. The observed condition is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (incorrect default gateway). The decisive distinction is: Measure convergence intervals and route flap frequency during fault drills.

C.

Measure convergence intervals and route flap frequency during fault drills. The reported evidence is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

D.

Track per-next-hop utilization and flow-level path imbalance. This alternative addresses a different issue (ecmp next-hop behavior). The reported case is: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: Measure convergence intervals and route flap frequency during fault drills.

Question 436

During an independent network handover at the Hollow Creek branch of North Basin Transit, the monitored service is fleet booking for clients in 10.115.6.0/24; incident reference is DC-8841. The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The branch requires an auditable explanation, a narrowly staged change, and a rollback plan that preserves its working services. What explanation best fits the observed network failure, rather than a merely possible separate fault?

  1. For DC-8841 at Hollow Creek, the technical interpretation is: Hello and dead timer mismatches prevent reliable OSPF neighbor formation.
  2. For DC-8841 at Hollow Creek, the technical interpretation is: A client access VLAN is incorrectly enabled for OSPF adjacency rather than advertised passively.
  3. For DC-8841 at Hollow Creek, the technical interpretation is: Equal-cost multipath usually selects an individual flow's next hop by hashing rather than duplicating every packet.
  4. For DC-8841 at Hollow Creek, the technical interpretation is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.

Answer and explanations

A.

Hello and dead timer mismatches prevent reliable OSPF neighbor formation. The observed condition is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ospf hello/dead timer mismatch). The decisive distinction is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.

B.

This alternative addresses a different issue (ospf passive lan interface). The option would address: A client access VLAN is incorrectly enabled for OSPF adjacency rather than advertised passively. The scenario instead reports: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

C.

Equal-cost multipath usually selects an individual flow's next hop by hashing rather than duplicating every packet. This alternative addresses a different issue (ecmp next-hop behavior). The reported case is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path.

D.

The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. That points to this explanation: Routing convergence timing, not IP address allocation, determines when traffic moves to a valid alternate path. Confirm the affected layer or service before applying a configuration change.

Question 437

During an independent network handover at the Hollow Creek branch of North Basin Transit, the monitored service is fleet booking for clients in 10.115.6.0/24; incident reference is DC-8841. The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The branch requires an auditable explanation, a narrowly staged change, and a rollback plan that preserves its working services. Which precise corrective change addresses the demonstrated failure with minimal unrelated disruption?

  1. For a controlled repair of fleet booking in Hollow Creek: Validate hello/dead detection or supported fast failure sensing against the change standard, then verify alternate next-hop availability.
  2. For a controlled repair of fleet booking in Hollow Creek: Use passive-interface behavior for the client VLAN while ensuring the connected network remains advertised as designed.
  3. For a controlled repair of fleet booking in Hollow Creek: Examine both directions of routing and session policy and align the required return path through the authorized stateful boundary.
  4. For a controlled repair of fleet booking in Hollow Creek: Align the link's documented IPv6 prefix and RA settings while preserving addressing plan and SLAAC constraints.

Answer and explanations

A.

For a controlled repair of fleet booking in Hollow Creek: Validate hello/dead detection or supported fast failure sensing against the change standard, then verify alternate next-hop availability. This addresses the decisive observation: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

B.

For a controlled repair of fleet booking in Hollow Creek: Use passive-interface behavior for the client VLAN while ensuring the connected network remains advertised as designed. This alternative addresses a different issue (ospf passive lan interface). The reported case is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

C.

This alternative addresses a different issue (return path symmetry). For a controlled repair of fleet booking in Hollow Creek: Examine both directions of routing and session policy and align the required return path through the authorized stateful boundary. In the reported case: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

D.

For a controlled repair of fleet booking in Hollow Creek: Align the link's documented IPv6 prefix and RA settings while preserving addressing plan and SLAAC constraints. The observed condition is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ipv6 prefix length error).

Question 438

During an independent network handover at the Hollow Creek branch of North Basin Transit, the monitored service is fleet booking for clients in 10.115.6.0/24; incident reference is DC-8841. The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The branch requires an auditable explanation, a narrowly staged change, and a rollback plan that preserves its working services. Which acceptance evidence most directly demonstrates that the proposed targeted correction works?

  1. For acceptance review of Hollow Creek change DC-8841: Multiple flow keys distribute across the two healthy next hops and a link-failure test preserves allowed service.
  2. For acceptance review of Hollow Creek change DC-8841: After a supervised link failure the stale route withdraws and permitted traffic uses the expected backup within the measured objective.
  3. For acceptance review of Hollow Creek change DC-8841: The neighbor cache reaches a reachable state and IPv6 unicast exchange succeeds locally.
  4. For acceptance review of Hollow Creek change DC-8841: A destination in the target /24 chooses the intended specific route while unrelated internet traffic uses the default.

Answer and explanations

A.

Multiple flow keys distribute across the two healthy next hops and a link-failure test preserves allowed service. This alternative addresses a different issue (would not prove the reported issue was corrected). The reported case is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

B.

The decisive evidence is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. After a supervised link failure the stale route withdraws and permitted traffic uses the expected backup within the measured objective.

C.

The neighbor cache reaches a reachable state and IPv6 unicast exchange succeeds locally. The observed condition is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (would not prove the reported issue was corrected).

D.

This alternative addresses a different issue (would not prove the reported issue was corrected). The option would address: A destination in the target /24 chooses the intended specific route while unrelated internet traffic uses the default. The scenario instead reports: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

Question 439

During an independent network handover at the Hollow Creek branch of North Basin Transit, the monitored service is fleet booking for clients in 10.115.6.0/24; incident reference is DC-8841. The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The branch requires an auditable explanation, a narrowly staged change, and a rollback plan that preserves its working services. Which remaining limitation should the engineer explicitly record even after the targeted repair?

  1. For the Hollow Creek network design record: Correcting an on-link mistake cannot replace all downstream routing toward the remote network.
  2. For the Hollow Creek network design record: Reducing MSS may help TCP flows but does not automatically solve every UDP or encapsulation overhead case.
  3. For the Hollow Creek network design record: Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy.
  4. For the Hollow Creek network design record: Matching timers cannot correct an area mismatch, authentication error or downstream route policy.

Answer and explanations

A.

This alternative addresses a different issue (ipv4 arp versus routing decision). For the Hollow Creek network design record: Correcting an on-link mistake cannot replace all downstream routing toward the remote network. In the reported case: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

B.

For the Hollow Creek network design record: Reducing MSS may help TCP flows but does not automatically solve every UDP or encapsulation overhead case. The observed condition is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ipv4 mtu and fragmentation symptoms).

C.

For the Hollow Creek network design record: Reducing protocol timers arbitrarily can destabilize neighbors and does not create physical redundancy. The reported evidence is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

D.

For the Hollow Creek network design record: Matching timers cannot correct an area mismatch, authentication error or downstream route policy. This alternative addresses a different issue (ospf hello/dead timer mismatch). The reported case is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

Question 440

During an independent network handover at the Hollow Creek branch of North Basin Transit, the monitored service is fleet booking for clients in 10.115.6.0/24; incident reference is DC-8841. The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The branch requires an auditable explanation, a narrowly staged change, and a rollback plan that preserves its working services. Which ongoing operational check is most relevant to recognizing recurrence of this failure?

  1. For a monitoring check at Hollow Creek: Monitor ND failures, duplicate address detection and blocked critical ICMPv6 types.
  2. For a monitoring check at Hollow Creek: Monitor route insertion/deletion and path selection for important destination prefixes.
  3. For a monitoring check at Hollow Creek: Monitor asymmetric route changes and stateful firewall drops for the service.
  4. For a monitoring check at Hollow Creek: Measure convergence intervals and route flap frequency during fault drills.

Answer and explanations

A.

Monitor ND failures, duplicate address detection and blocked critical ICMPv6 types. The observed condition is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. This alternative addresses a different issue (ipv6 neighbor discovery). The decisive distinction is: Measure convergence intervals and route flap frequency during fault drills.

B.

This alternative addresses a different issue (longest prefix route selection). The option would address: Monitor route insertion/deletion and path selection for important destination prefixes. The scenario instead reports: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state.

C.

Monitor asymmetric route changes and stateful firewall drops for the service. This alternative addresses a different issue (return path symmetry). The reported case is: The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. The decisive distinction is: Measure convergence intervals and route flap frequency during fault drills.

D.

The on-duty analyst documents this symptom before proposing any configuration: A downstream OSPF route remains in forwarding briefly after a link failure because failure detection and reconvergence lag behind link state. That points to this explanation: Measure convergence intervals and route flap frequency during fault drills.