McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 7

Question 60

At fictional Beacon Healthcare, a network engineer supporting hospital network services is reviewing Huawei network security and VPN isolation during a post-maintenance incident review (HCIP-H12-821-SECURITY-015). The observed network issue is: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. Which routing, switching, or network principle best explains the appropriate solution?

  1. Cleartext administrative protocols can expose credentials and control activity.
  2. Security capabilities are ineffective when packets do not traverse their enforcement point.
  3. VPN tunnel establishment does not by itself guarantee each application uses the intended route.
  4. Security zones reflect interface trust boundaries used by policy evaluation.

Explanation

Correct Answer

B:

The governing principle is: Security capabilities are ineffective when packets do not traverse their enforcement point. In this scenario, the appropriate action is: Place the inspection point on the actual traffic path or redesign routing for approved service chaining. Valid evidence would show: Controlled traffic reaches the inspection policy and logs show intended enforcement.

Incorrect Answers

A:

“Cleartext administrative protocols can expose credentials and control activity” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: Cleartext administrative protocols can expose credentials and control activity. The present issue is: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. The more direct action is “Security capabilities are ineffective when packets do not traverse their enforcement point” because Security capabilities are ineffective when packets do not traverse their enforcement point.

C:

“VPN tunnel establishment does not by itself guarantee each application uses the intended route” responds to another technical or business failure: A remote-access VPN sends sensitive traffic outside the encrypted tunnel because split-tunnel destinations were omitted. That source case depends on: VPN tunnel establishment does not by itself guarantee each application uses the intended route. The present issue is: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. The more direct action is “Security capabilities are ineffective when packets do not traverse their enforcement point” because Security capabilities are ineffective when packets do not traverse their enforcement point.

D:

“Security zones reflect interface trust boundaries used by policy evaluation” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: Security zones reflect interface trust boundaries used by policy evaluation. The present issue is: A security feature is installed but traffic bypasses inspection because it crosses an interface outside the intended firewall topology. The more direct action is “Security capabilities are ineffective when packets do not traverse their enforcement point” because Security capabilities are ineffective when packets do not traverse their enforcement point.

Question 61

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing BGP routing, path attributes and EVPN exchange during a customer network audit (HCIP-H12-821-BGP-016). The observed network issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. Which routing, switching, or network principle best explains the appropriate solution?

  1. IP reachability alone does not imply that BGP TCP transport is permitted.
  2. Multiprotocol BGP capabilities determine which families of routes may be exchanged.
  3. Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.
  4. BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors.

Explanation

Correct Answer

C:

The governing principle is: Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes. In this scenario, the appropriate action is: Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement. Valid evidence would show: Intended internal peers learn the prefixes without introducing routing loops.

Incorrect Answers

A:

“IP reachability alone does not imply that BGP TCP transport is permitted” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: IP reachability alone does not imply that BGP TCP transport is permitted. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes” because Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

B:

“Multiprotocol BGP capabilities determine which families of routes may be exchanged” responds to another technical or business failure: A device advertises VPN address families to an ordinary IPv4-unicast-only peer and receives no expected EVPN updates. That source case depends on: Multiprotocol BGP capabilities determine which families of routes may be exchanged. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes” because Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

D:

“BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors” responds to another technical or business failure: An edge router tries to influence its upstream provider's path selection by assigning LOCAL_PREF on an eBGP announcement. That source case depends on: BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes” because Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

Question 62

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing BGP routing, path attributes and EVPN exchange during a customer network audit (HCIP-H12-821-BGP-016). The observed network issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. Which next engineering action best addresses the reported problem?

  1. Validate supporting component routes and safe aggregate generation or discard behavior.
  2. Configure the supported eBGP multihop reachability and correct peer addresses with appropriate routing.
  3. Narrow permitted prefix filters to the approved route set and confirm the aggregate's precise prefix length.
  4. Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement.

Explanation

Correct Answer

D:

The directly responsive action is: Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement. The specific reported fault is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. Confirmation should show: Intended internal peers learn the prefixes without introducing routing loops. The supporting technical principle is: Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

Incorrect Answers

A:

“Validate supporting component routes and safe aggregate generation or discard behavior” responds to another technical or business failure: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. That source case depends on: BGP aggregation must be consistent with actual routed component reachability. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement” because Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

B:

“Configure the supported eBGP multihop reachability and correct peer addresses with appropriate routing” responds to another technical or business failure: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That source case depends on: EBGP multi-hop peers require explicit control of TTL and loopback reachability. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement” because Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

C:

“Narrow permitted prefix filters to the approved route set and confirm the aggregate's precise prefix length” responds to another technical or business failure: An administrator applies an export prefix list at the BGP border but mistakenly filters all networks including a critical aggregate. That source case depends on: BGP outbound prefix filtering controls which NLRI are advertised to external peers. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement” because Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes.

Question 63

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing BGP routing, path attributes and EVPN exchange during a customer network audit (HCIP-H12-821-BGP-016). The observed network issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test TCP 179 specifically for peering after security policy changes.
  2. Review match ordering with representative permitted and denied prefixes.
  3. Verify full mesh or route reflector client coverage during topology expansion.
  4. Review VNI and RT mapping before changing underlay topology.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Verify full mesh or route reflector client coverage during topology expansion. This directly addresses the recurring fault: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The corrective action would be: Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement. Success is demonstrated when: Intended internal peers learn the prefixes without introducing routing loops.

Incorrect Answers

A:

“Test TCP 179 specifically for peering after security policy changes” addresses recurrence of another problem: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That problem depends on: The preventive or detective safeguard is: Test TCP 179 specifically for peering after security policy changes. The recurring risk here is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more targeted safeguard is “Verify full mesh or route reflector client coverage during topology expansion” because the preventive or detective safeguard is: Verify full mesh or route reflector client coverage during topology expansion.

B:

“Review match ordering with representative permitted and denied prefixes” addresses recurrence of another problem: A route-policy applies an import deny clause before the intended permit and unexpectedly drops every received route. That problem depends on: The preventive or detective safeguard is: Review match ordering with representative permitted and denied prefixes. The recurring risk here is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more targeted safeguard is “Verify full mesh or route reflector client coverage during topology expansion” because the preventive or detective safeguard is: Verify full mesh or route reflector client coverage during topology expansion.

D:

“Review VNI and RT mapping before changing underlay topology” addresses recurrence of another problem: A fabric advertises a host MAC under the wrong VNI and an engineer changes the global underlay OSPF cost to compensate. That problem depends on: The preventive or detective safeguard is: Review VNI and RT mapping before changing underlay topology. The recurring risk here is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more targeted safeguard is “Verify full mesh or route reflector client coverage during topology expansion” because the preventive or detective safeguard is: Verify full mesh or route reflector client coverage during topology expansion.

Question 64

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing BGP routing, path attributes and EVPN exchange during a customer network audit (HCIP-H12-821-BGP-016). The observed network issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. Which observation most directly verifies that the corrective change succeeded?

  1. Intended internal peers learn the prefixes without introducing routing loops.
  2. External observed routes show the intended prepending while any remaining policy preference is explained.
  3. Correct tenant MAC routes appear only in the intended bridge domain.
  4. Internal routers select the higher intended local-preference path while keeping next-hop reachability.

Explanation

Correct Answer

A:

The best verification observation is: Intended internal peers learn the prefixes without introducing routing loops. It demonstrates the corrective action: Design full mesh or supported route reflection rather than relying on normal iBGP route readvertisement. This fits the principle: Standard iBGP split-horizon behavior limits readvertisement of iBGP-learned routes. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“External observed routes show the intended prepending while any remaining policy preference is explained” responds to another technical or business failure: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. That source case depends on: The best verification observation is: External observed routes show the intended prepending while any remaining policy preference is explained. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Intended internal peers learn the prefixes without introducing routing loops” because the best verification observation is: Intended internal peers learn the prefixes without introducing routing loops.

C:

“Correct tenant MAC routes appear only in the intended bridge domain” responds to another technical or business failure: A fabric advertises a host MAC under the wrong VNI and an engineer changes the global underlay OSPF cost to compensate. That source case depends on: The best verification observation is: Correct tenant MAC routes appear only in the intended bridge domain. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Intended internal peers learn the prefixes without introducing routing loops” because the best verification observation is: Intended internal peers learn the prefixes without introducing routing loops.

D:

“Internal routers select the higher intended local-preference path while keeping next-hop reachability” responds to another technical or business failure: Two external BGP exits learn the same remote prefix and a company needs consistent outbound preference inside the AS. That source case depends on: The best verification observation is: Internal routers select the higher intended local-preference path while keeping next-hop reachability. The present issue is: An iBGP router learns routes from one iBGP peer but fails to advertise them to another internal peer. The more direct action is “Intended internal peers learn the prefixes without introducing routing loops” because the best verification observation is: Intended internal peers learn the prefixes without introducing routing loops.

Question 65

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing OSPF area design and link-state convergence during an intersite service activation (HCIP-H12-821-OSPF-017). The observed network issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. Which next engineering action best addresses the reported problem?

  1. Confirm stub-area configuration and ABR-originated default routing according to the chosen area type.
  2. Distinguish local routing-table filtering from permitted link-state database flooding and redesign at an appropriate boundary.
  3. Inspect external redistribution configuration, LSA Type 5 generation and area restrictions.
  4. Compare E1 versus E2 metric handling and evaluate route selection under competing exits.

Explanation

Correct Answer

A:

The directly responsive action is: Confirm stub-area configuration and ABR-originated default routing according to the chosen area type. The specific reported fault is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. Confirmation should show: The stub area has its intended default route without a flood of prohibited AS-external LSAs. The supporting technical principle is: Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

Incorrect Answers

B:

“Distinguish local routing-table filtering from permitted link-state database flooding and redesign at an appropriate boundary” responds to another technical or business failure: An engineer uses a prefix-filter on one OSPF router expecting to prevent every other router from receiving the LSA. That source case depends on: OSPF route installation filtering is not necessarily equivalent to suppressing flooded LSAs. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “Confirm stub-area configuration and ABR-originated default routing according to the chosen area type” because Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

C:

“Inspect external redistribution configuration, LSA Type 5 generation and area restrictions” responds to another technical or business failure: An ASBR redistributes a static service subnet but other areas never see its external OSPF destination. That source case depends on: OSPF external routing requires correctly originated and flooded AS-external LSAs. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “Confirm stub-area configuration and ABR-originated default routing according to the chosen area type” because Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

D:

“Compare E1 versus E2 metric handling and evaluate route selection under competing exits” responds to another technical or business failure: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. That source case depends on: OSPF E1 and E2 external cost calculations treat internal path costs differently. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “Confirm stub-area configuration and ABR-originated default routing according to the chosen area type” because Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

Question 66

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing OSPF area design and link-state convergence during an intersite service activation (HCIP-H12-821-OSPF-017). The observed network issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. Which ongoing preventive or detective control would best reduce recurrence?

  1. State E1 or E2 design intent in redistribution policies and validate dual exits.
  2. Monitor neighbor resets and interface congestion together during incident triage.
  3. Test default availability and external-LSA suppression when converting areas.
  4. Validate each constituent prefix and failover behavior under a planned aggregate.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Test default availability and external-LSA suppression when converting areas. This directly addresses the recurring fault: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The corrective action would be: Confirm stub-area configuration and ABR-originated default routing according to the chosen area type. Success is demonstrated when: The stub area has its intended default route without a flood of prohibited AS-external LSAs.

Incorrect Answers

A:

“State E1 or E2 design intent in redistribution policies and validate dual exits” addresses recurrence of another problem: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. That problem depends on: The preventive or detective safeguard is: State E1 or E2 design intent in redistribution policies and validate dual exits. The recurring risk here is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more targeted safeguard is “Test default availability and external-LSA suppression when converting areas” because the preventive or detective safeguard is: Test default availability and external-LSA suppression when converting areas.

B:

“Monitor neighbor resets and interface congestion together during incident triage” addresses recurrence of another problem: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. That problem depends on: The preventive or detective safeguard is: Monitor neighbor resets and interface congestion together during incident triage. The recurring risk here is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more targeted safeguard is “Test default availability and external-LSA suppression when converting areas” because the preventive or detective safeguard is: Test default availability and external-LSA suppression when converting areas.

D:

“Validate each constituent prefix and failover behavior under a planned aggregate” addresses recurrence of another problem: An OSPF summary aggregate covers a disconnected subnet and an engineer assumes all summarized addresses have valid next hops. That problem depends on: The preventive or detective safeguard is: Validate each constituent prefix and failover behavior under a planned aggregate. The recurring risk here is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more targeted safeguard is “Test default availability and external-LSA suppression when converting areas” because the preventive or detective safeguard is: Test default availability and external-LSA suppression when converting areas.

Question 67

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing OSPF area design and link-state convergence during an intersite service activation (HCIP-H12-821-OSPF-017). The observed network issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. Which routing, switching, or network principle best explains the appropriate solution?

  1. Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.
  2. NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.
  3. Incompatible interface MTU can interrupt OSPF database synchronization.
  4. OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

Explanation

Correct Answer

A:

The governing principle is: Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability. In this scenario, the appropriate action is: Confirm stub-area configuration and ABR-originated default routing according to the chosen area type. Valid evidence would show: The stub area has its intended default route without a flood of prohibited AS-external LSAs.

Incorrect Answers

B:

“NSSA external routes use Type 7 LSAs internally and can be translated at an ABR” responds to another technical or business failure: An NSSA branch redistributes a local service prefix but the backbone never receives the route. That source case depends on: NSSA external routes use Type 7 LSAs internally and can be translated at an ABR. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability” because Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

C:

“Incompatible interface MTU can interrupt OSPF database synchronization” responds to another technical or business failure: An OSPF neighbor stays in Exchange and large database description packets fail over a reduced-MTU tunnel. That source case depends on: Incompatible interface MTU can interrupt OSPF database synchronization. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability” because Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

D:

“OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss” responds to another technical or business failure: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. That source case depends on: OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability” because Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability.

Question 68

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing OSPF area design and link-state convergence during an intersite service activation (HCIP-H12-821-OSPF-017). The observed network issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. Which observation most directly verifies that the corrective change succeeded?

  1. Neighbors form a stable adjacency without an unintended DR election on the point-to-point link.
  2. The backbone receives the intended external aggregate and required exceptions.
  3. The stub area has its intended default route without a flood of prohibited AS-external LSAs.
  4. Traffic to the external prefix follows a resolvable advertised forwarding address.

Explanation

Correct Answer

C:

The best verification observation is: The stub area has its intended default route without a flood of prohibited AS-external LSAs. It demonstrates the corrective action: Confirm stub-area configuration and ABR-originated default routing according to the chosen area type. This fits the principle: Stub OSPF areas suppress ordinary external LSAs and rely on area-appropriate reachability. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Neighbors form a stable adjacency without an unintended DR election on the point-to-point link” responds to another technical or business failure: Two OSPF devices on a point-to-point fiber cannot build an adjacency because their interface network types differ. That source case depends on: The best verification observation is: Neighbors form a stable adjacency without an unintended DR election on the point-to-point link. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “The stub area has its intended default route without a flood of prohibited AS-external LSAs” because the best verification observation is: The stub area has its intended default route without a flood of prohibited AS-external LSAs.

B:

“The backbone receives the intended external aggregate and required exceptions” responds to another technical or business failure: An ASBR advertising multiple external subnets floods excessive details because external route aggregation was never applied. That source case depends on: The best verification observation is: The backbone receives the intended external aggregate and required exceptions. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “The stub area has its intended default route without a flood of prohibited AS-external LSAs” because the best verification observation is: The stub area has its intended default route without a flood of prohibited AS-external LSAs.

D:

“Traffic to the external prefix follows a resolvable advertised forwarding address” responds to another technical or business failure: An external OSPF route prefers the wrong exit because its forwarding address is unreachable or unexpected. That source case depends on: The best verification observation is: Traffic to the external prefix follows a resolvable advertised forwarding address. The present issue is: A default route disappears inside an OSPF stub area because engineers expect external Type 5 LSAs to flood normally. The more direct action is “The stub area has its intended default route without a flood of prohibited AS-external LSAs” because the best verification observation is: The stub area has its intended default route without a flood of prohibited AS-external LSAs.

Question 69

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing DHCP and network management during a supervised route change (HCIP-H12-821-SERVICES-018). The observed network issue is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate SNMPv3 reachability and least-privilege views before monitoring rollout.
  2. Test DHCP relay behavior after server migration and VLAN changes.
  3. Compare affected prefixes and VRF scope before changing route preference.
  4. Monitor failed NDP resolution during IPv6 infrastructure cutovers.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Test DHCP relay behavior after server migration and VLAN changes. This directly addresses the recurring fault: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The corrective action would be: Correct DHCP relay target and ensure permitted return reachability for the serving pool. Success is demonstrated when: A controlled client receives the correct address, mask and gateway from the intended server.

Incorrect Answers

A:

“Validate SNMPv3 reachability and least-privilege views before monitoring rollout” addresses recurrence of another problem: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. That problem depends on: The preventive or detective safeguard is: Validate SNMPv3 reachability and least-privilege views before monitoring rollout. The recurring risk here is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The more targeted safeguard is “Test DHCP relay behavior after server migration and VLAN changes” because the preventive or detective safeguard is: Test DHCP relay behavior after server migration and VLAN changes.

C:

“Compare affected prefixes and VRF scope before changing route preference” addresses recurrence of another problem: A dual-provider network expects a routing preference change to affect only one VLAN yet every route in the VRF changes. That problem depends on: The preventive or detective safeguard is: Compare affected prefixes and VRF scope before changing route preference. The recurring risk here is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The more targeted safeguard is “Test DHCP relay behavior after server migration and VLAN changes” because the preventive or detective safeguard is: Test DHCP relay behavior after server migration and VLAN changes.

D:

“Monitor failed NDP resolution during IPv6 infrastructure cutovers” addresses recurrence of another problem: A router forwards IPv6 packets over a link but neighbor solicitation never receives a valid advertisement for the selected next hop. That problem depends on: The preventive or detective safeguard is: Monitor failed NDP resolution during IPv6 infrastructure cutovers. The recurring risk here is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The more targeted safeguard is “Test DHCP relay behavior after server migration and VLAN changes” because the preventive or detective safeguard is: Test DHCP relay behavior after server migration and VLAN changes.

Question 70

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing DHCP and network management during a supervised route change (HCIP-H12-821-SERVICES-018). The observed network issue is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. Which observation most directly verifies that the corrective change succeeded?

  1. A controlled client receives the correct address, mask and gateway from the intended server.
  2. Link-state updates and SPF events settle after the failing interface is stabilized.
  3. Controlled traffic shows desired throughput and measured color actions without unexpected loss.
  4. Clients receive valid leases and can reach authorized off-subnet destinations.

Explanation

Correct Answer

A:

The best verification observation is: A controlled client receives the correct address, mask and gateway from the intended server. It demonstrates the corrective action: Correct DHCP relay target and ensure permitted return reachability for the serving pool. This fits the principle: DHCP relay bridges client broadcast requests to a configured reachable server. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Link-state updates and SPF events settle after the failing interface is stabilized” responds to another technical or business failure: A router repeatedly runs SPF after frequent interface state changes and application latency rises. That source case depends on: The best verification observation is: Link-state updates and SPF events settle after the failing interface is stabilized. The present issue is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The more direct action is “A controlled client receives the correct address, mask and gateway from the intended server” because the best verification observation is: A controlled client receives the correct address, mask and gateway from the intended server.

C:

“Controlled traffic shows desired throughput and measured color actions without unexpected loss” responds to another technical or business failure: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. That source case depends on: The best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss. The present issue is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The more direct action is “A controlled client receives the correct address, mask and gateway from the intended server” because the best verification observation is: A controlled client receives the correct address, mask and gateway from the intended server.

D:

“Clients receive valid leases and can reach authorized off-subnet destinations” responds to another technical or business failure: A DHCP pool provides the correct address block but clients cannot route because option 3 advertises the wrong default gateway. That source case depends on: The best verification observation is: Clients receive valid leases and can reach authorized off-subnet destinations. The present issue is: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. The more direct action is “A controlled client receives the correct address, mask and gateway from the intended server” because the best verification observation is: A controlled client receives the correct address, mask and gateway from the intended server.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests