McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 21

Question 200

A validation test observes a broadcast traversing both multihomed access peers and then looping back into its origin segment due to missing split-horizon treatment. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Audit RD uniqueness and RT import/export as two independent controls during EVPN template changes.
  2. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.
  3. Test both positive and negative route-target import outcomes during tenant deployment.
  4. Add split-horizon validation to multihomed rack commissioning and peer replacement checklists.

Explanation

Correct Answer

D:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Add split-horizon validation to multihomed rack commissioning and peer replacement checklists. Multihoming loop prevention depends on segment provenance rather than treating every flood path as independent.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: Two VTEPs advertise otherwise identical tenant prefixes, and an engineer reuses route identity assumptions that obscure how BGP can distinguish different originating advertisements. That situation concerns an EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. Its key condition is eVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated.

B:

Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations. That concerns EVPN MAC mobility after virtual machine relocation, while the issue here is EVPN multihoming split-horizon behavior. Verify the supported ESI split-horizon and multihoming forwarding state, and correct mismatched peer membership before adding broader flood permissions.

C:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. For this issue, verify the supported ESI split-horizon and multihoming forwarding state, and correct mismatched peer membership before adding broader flood permissions.

Question 201

Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge.
  2. VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.
  3. Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.
  4. EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated.

Explanation

Correct Answer

C:

The decisive cause is common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Incorrect Answers

A:

In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

B:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. That concerns ingress VTEP encapsulation and egress decapsulation, while the issue here is ECMP hash path versus per-packet round robin. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

D:

EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

Question 202

Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops. Which configuration or operational action MOST directly addresses the problem?

  1. Confirm the appropriate tenant VRF and supported IP-prefix export, import targets and remote route installation before testing intersubnet traffic.
  2. Correlate interface errors, supported BFD or routing-neighbor state and route withdrawal, then correct the underlay fault and validate recovery.
  3. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.
  4. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Explanation

Correct Answer

D:

In this case, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Incorrect Answers

A:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

B:

Correlate interface errors, supported BFD or routing-neighbor state and route withdrawal, then correct the underlay fault and validate recovery. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

C:

Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership. That concerns EVPN route target tenant import rather than ECMP hash path versus per-packet round robin. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Question 203

Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops. The team proposes: Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance. Which data-center or operational principle BEST justifies that choice?

  1. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.
  2. Tunnel reachability for small packets does not prove the transport supports full-size encapsulated application traffic.
  3. The routed fabric foundation depends on working protocol adjacencies and installed prefixes, not merely Ethernet carrier.
  4. Equal-cost path availability does not imply that each individual connection uses every available physical route.

Explanation

Correct Answer

D:

Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops. The central principle is equal-cost path availability does not imply that each individual connection uses every available physical route. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Incorrect Answers

A:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

B:

Tunnel reachability for small packets does not prove the transport supports full-size encapsulated application traffic. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

C:

The routed fabric foundation depends on working protocol adjacencies and installed prefixes, not merely Ethernet carrier. That concerns BGP underlay adjacency versus established overlay rather than ECMP hash path versus per-packet round robin. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Question 204

Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops. After applying this change—Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.—which observation BEST demonstrates success?

  1. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.
  2. A test flow between leaf-attached hosts follows a supported leaf–spine–leaf path and avoids an unintended transit leaf.
  3. A bounded broadcast test arrives at the shared attachment once per intended frame and DF status matches the effective forwarding role.
  4. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Explanation

Correct Answer

D:

Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow. That tests the recommended change (Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.) against the original case: Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops.

Incorrect Answers

A:

The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end. That concerns underlay reachability prerequisite for overlay, while the issue here is ECMP hash path versus per-packet round robin. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

B:

In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

C:

A bounded broadcast test arrives at the shared attachment once per intended frame and DF status matches the effective forwarding role. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

Question 205

Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream.
  2. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  3. Test both positive and negative route-target import outcomes during tenant deployment.
  4. Add split-horizon validation to multihomed rack commissioning and peer replacement checklists.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream. That is important in this case because common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. The scenario was: Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops.

Incorrect Answers

B:

Check anycast gateway consistency whenever a tenant virtual network is extended to another rack. That concerns anycast default gateway identity across leafs, while the issue here is ECMP hash path versus per-packet round robin. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

C:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

D:

Add split-horizon validation to multihomed rack commissioning and peer replacement checklists. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Specifically for the prevention question, the case to validate is: Two large flows traverse different spines, and a troubleshooting script incorrectly assumes that every consecutive packet of one flow must alternate evenly across all ECMP next hops.

Question 206

A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.
  2. Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail.
  3. Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.
  4. VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload.

Explanation

Correct Answer

C:

The fault is not established by a generic firewall symptom alone. Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Incorrect Answers

A:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

B:

Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. That concerns BGP underlay adjacency versus established overlay, while the issue here is ECMP hash path versus per-packet round robin. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

D:

VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

Question 207

A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. Which configuration or operational action MOST directly addresses the problem?

  1. Trace the actual leaf-to-spine adjacencies and restore the reference topology so each leaf has its intended uplinks to the spine set.
  2. Inspect the supported DF election and Ethernet-segment role state, then correct inconsistent multihoming membership or election inputs.
  3. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.
  4. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Explanation

Correct Answer

D:

This action directly fixes the documented constraint: Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Apply it to the reported case: A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. Then verify: Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Incorrect Answers

A:

In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge. However, the present correction decision is grounded in: A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

B:

Inspect the supported DF election and Ethernet-segment role state, then correct inconsistent multihoming membership or election inputs. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

C:

Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again. That concerns underlay reachability prerequisite for overlay rather than ECMP hash path versus per-packet round robin. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Question 208

A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. The team proposes: Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance. Which data-center or operational principle BEST justifies that choice?

  1. Multihoming loop prevention depends on segment provenance rather than treating every flood path as independent.
  2. Equal-cost path availability does not imply that each individual connection uses every available physical route.
  3. Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport.
  4. Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes.

Explanation

Correct Answer

B:

This principle links classification and policy semantics to the relevant failure. Equal-cost path availability does not imply that each individual connection uses every available physical route. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. The remedy under discussion is: Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Incorrect Answers

A:

EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

C:

Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport. That concerns EVPN route target tenant import rather than ECMP hash path versus per-packet round robin. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow. Specifically for the principle question, the case to validate is: A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing.

D:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

Question 209

A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. After applying this change—Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.—which observation BEST demonstrates success?

  1. The receiving VRF learns the intended IP prefix by EVPN and forwards authorized routed test traffic to the correct overlay next hop.
  2. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.
  3. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.
  4. Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths.

Explanation

Correct Answer

C:

The criterion directly exercises the affected flow or security object: Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow. The original condition was: A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. The relevant correction is: Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Incorrect Answers

A:

The receiving VRF learns the intended IP prefix by EVPN and forwards authorized routed test traffic to the correct overlay next hop. That concerns EVPN Type 5 routed prefix reachability, while the issue here is ECMP hash path versus per-packet round robin. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

B:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. However, the present verification decision is grounded in: A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

D:

Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths. That concerns underlay failure isolation using BFD and route state rather than ECMP hash path versus per-packet round robin. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Question 210

A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream.
  2. Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance.
  3. Include DF role and BUM duplication checks in EVPN multihoming change tests.
  4. Include controlled link-failure ECMP convergence tests in rack commissioning and uplink changes.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Apply the recurring practice: Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream. The previous example was: A high-throughput TCP transfer appears to use a single uplink despite four equal-cost paths, and an operator declares ECMP broken without checking flow-based hashing.

Incorrect Answers

B:

Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance. That concerns VTEP loopback source identity stability, while the issue here is ECMP hash path versus per-packet round robin. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

C:

EVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery. For this issue, test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

D:

Include controlled link-failure ECMP convergence tests in rack commissioning and uplink changes. Here, common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests