McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 28

Question 270

A fabric incident requires reconstructing an Apstra blueprint change and a low-level device interface error, but the responder checks only one event stream. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Check platform feature matrices and rendered diffs when introducing new device models into an existing blueprint.
  2. Preserve time synchronization and documented event-source mappings for blueprint and network incident response.
  3. Monitor managed agent reachability separately from leaf transit interface counters.
  4. Treat the blueprint as the approved change source for managed fabric features and audit out-of-band edits.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: Apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps. Apply the recurring practice: Preserve time synchronization and documented event-source mappings for blueprint and network incident response. The previous example was: A fabric incident requires reconstructing an Apstra blueprint change and a low-level device interface error, but the responder checks only one event stream.

Incorrect Answers

A:

Apstra abstracts desired design and renders supported device-specific configuration according to each managed platform's profiles and capabilities. For the current prevention question, the evidence instead states: A fabric incident requires reconstructing an Apstra blueprint change and a low-level device interface error, but the responder checks only one event stream. Here, apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps.

C:

Apstra device management and telemetry depend on working agent and control connectivity in addition to ordinary data-plane reachability. However, the present prevention decision is grounded in: A fabric incident requires reconstructing an Apstra blueprint change and a low-level device interface error, but the responder checks only one event stream. For this issue, inspect blueprint event history together with the configured system or device syslog destination and correlate the relevant time window.

D:

Treat the blueprint as the approved change source for managed fabric features and audit out-of-band edits. Here, apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps.

Question 271

A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. The Apstra server maintains the managed blueprint intent and derives coordinated device configurations from that centralized model.
  2. A managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.
  3. Apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps.
  4. Apstra presents modeled and staged intent separately from what has been committed and deployed on managed devices.

Explanation

Correct Answer

B:

A managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Incorrect Answers

A:

The Apstra server maintains the managed blueprint intent and derives coordinated device configurations from that centralized model. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

C:

Apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

D:

Apstra presents modeled and staged intent separately from what has been committed and deployed on managed devices. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

Question 272

A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect agent health, credentials and the supported management transport, then restore the device agent connection without relaxing fabric security.
  2. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.
  3. Define the intent using supported Apstra objects, inspect each target's rendered configuration and use only validated vendor-specific extensions where required.
  4. Assign an approved least-privilege role that grants needed blueprint visibility without unnecessary configuration or deployment privileges.

Explanation

Correct Answer

B:

Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement. The target behavior is demonstrated when the intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Incorrect Answers

A:

Apstra device management and telemetry depend on working agent and control connectivity in addition to ordinary data-plane reachability. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

C:

Define the intent using supported Apstra objects, inspect each target's rendered configuration and use only validated vendor-specific extensions where required. That concerns apstra software-managed workflow versus device-specific syntax rather than managed device discovery and system identity. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

D:

Apstra role-based access control separates monitoring and change authority based on the assigned user permissions and scope. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

Question 273

A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. The team proposes: Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement. Which data-center or operational principle BEST justifies that choice?

  1. Monitoring confidence requires evidence of both measurement content and its collection freshness.
  2. Intent-based network operations coordinate configuration from a shared model rather than accepting independent device edits as authoritative.
  3. Device names are convenient labels, while management identity must uniquely bind the intended physical asset to its fabric role.
  4. Controller intent events and device diagnostic logs provide complementary evidence, not a single interchangeable audit stream.

Explanation

Correct Answer

C:

Device names are convenient labels, while management identity must uniquely bind the intended physical asset to its fabric role. It justifies the proposed change (Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.) for the precise reported case: A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap.

Incorrect Answers

A:

Previously collected telemetry may remain displayed after management collection stops and must not be mistaken for a live measurement. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

B:

Intent-based network operations coordinate configuration from a shared model rather than accepting independent device edits as authoritative. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

D:

Apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

Question 274

A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. After applying this change—Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.—which observation BEST demonstrates success?

  1. The leaf appears with the expected healthy managed state and current telemetry in the blueprint while production forwarding remains intact.
  2. Multiple supported device families implement the intended logical service with appropriate per-platform syntax and no unsupported commands.
  3. The approved service is present in the active blueprint and its rendered device state, not just in an uncommitted UI view.
  4. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Explanation

Correct Answer

D:

The configuration is not validated merely by a successful commit. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration. A managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

Incorrect Answers

A:

The leaf appears with the expected healthy managed state and current telemetry in the blueprint while production forwarding remains intact. That concerns apstra agent connectivity to managed device, while the issue here is managed device discovery and system identity. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

B:

Apstra abstracts desired design and renders supported device-specific configuration according to each managed platform's profiles and capabilities. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

C:

The approved service is present in the active blueprint and its rendered device state, not just in an uncommitted UI view. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

Question 275

A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Treat the blueprint as the approved change source for managed fabric features and audit out-of-band edits.
  2. Require meaningful commit descriptions and retain controller audit evidence in change reviews.
  3. Alert on telemetry staleness and controller-agent loss separately from high interface utilization.
  4. Require hardware identity and inventory reconciliation before accepting newly discovered or replaced devices.

Explanation

Correct Answer

D:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Require hardware identity and inventory reconciliation before accepting newly discovered or replaced devices. Device names are convenient labels, while management identity must uniquely bind the intended physical asset to its fabric role.

Incorrect Answers

A:

The Apstra server maintains the managed blueprint intent and derives coordinated device configurations from that centralized model. For the current prevention question, the evidence instead states: A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

B:

Require meaningful commit descriptions and retain controller audit evidence in change reviews. That concerns apstra event stream for change accountability, while the issue here is managed device discovery and system identity. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

C:

Previously collected telemetry may remain displayed after management collection stops and must not be mistaken for a live measurement. However, the present prevention decision is grounded in: A leaf has the expected IP address but the blueprint associates it with the wrong managed device identity after an equipment swap. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

Question 276

Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. The Apstra server maintains the managed blueprint intent and derives coordinated device configurations from that centralized model.
  2. Previously collected telemetry may remain displayed after management collection stops and must not be mistaken for a live measurement.
  3. A managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.
  4. Apstra application event records and device/system syslog messages can describe different layers of activity and require correlated timestamps.

Explanation

Correct Answer

C:

The decisive cause is a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

Incorrect Answers

A:

The Apstra server maintains the managed blueprint intent and derives coordinated device configurations from that centralized model. For the current diagnosis question, the evidence instead states: Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

B:

Previously collected telemetry may remain displayed after management collection stops and must not be mistaken for a live measurement. That concerns agent status versus telemetry freshness, while the issue here is managed device discovery and system identity. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: An administrator expects the Apstra event log to be the complete storage system for every operating-system syslog generated by all leafs. Its decisive constraint is a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

Question 277

Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. Which configuration or operational action MOST directly addresses the problem?

  1. Define the intent using supported Apstra objects, inspect each target's rendered configuration and use only validated vendor-specific extensions where required.
  2. Compare staged, uncommitted and active blueprint state, then commit the validated change before claiming production activation.
  3. Inspect agent health, credentials and the supported management transport, then restore the device agent connection without relaxing fabric security.
  4. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

Explanation

Correct Answer

D:

In this case, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Incorrect Answers

A:

Apstra abstracts desired design and renders supported device-specific configuration according to each managed platform's profiles and capabilities. However, the present correction decision is grounded in: Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

B:

Compare staged, uncommitted and active blueprint state, then commit the validated change before claiming production activation. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

C:

Inspect agent health, credentials and the supported management transport, then restore the device agent connection without relaxing fabric security. That concerns apstra agent connectivity to managed device rather than managed device discovery and system identity. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Question 278

Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. The team proposes: Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement. Which data-center or operational principle BEST justifies that choice?

  1. Change accountability depends on recorded management operations as well as the final configuration state.
  2. Monitoring confidence requires evidence of both measurement content and its collection freshness.
  3. Intent-based network operations coordinate configuration from a shared model rather than accepting independent device edits as authoritative.
  4. Device names are convenient labels, while management identity must uniquely bind the intended physical asset to its fabric role.

Explanation

Correct Answer

D:

Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. The central principle is device names are convenient labels, while management identity must uniquely bind the intended physical asset to its fabric role. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

Incorrect Answers

A:

Apstra management events and revision metadata provide operational evidence of blueprint actions that the current switch state alone cannot reconstruct. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

B:

Monitoring confidence requires evidence of both measurement content and its collection freshness. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

C:

Intent-based network operations coordinate configuration from a shared model rather than accepting independent device edits as authoritative. That concerns apstra server as intent and blueprint coordinator rather than managed device discovery and system identity. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Question 279

Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. After applying this change—Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.—which observation BEST demonstrates success?

  1. The approved service is present in the active blueprint and its rendered device state, not just in an uncommitted UI view.
  2. Multiple supported device families implement the intended logical service with appropriate per-platform syntax and no unsupported commands.
  3. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.
  4. The investigation identifies both the Apstra change event and the device-side operational signal without assuming the logs are identical.

Explanation

Correct Answer

C:

The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration. That tests the recommended change (Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.) against the original case: Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes.

Incorrect Answers

A:

The approved service is present in the active blueprint and its rendered device state, not just in an uncommitted UI view. That concerns apstra UI versus active configuration state, while the issue here is managed device discovery and system identity. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

B:

Apstra abstracts desired design and renders supported device-specific configuration according to each managed platform's profiles and capabilities. However, the present verification decision is grounded in: Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

D:

The investigation identifies both the Apstra change event and the device-side operational signal without assuming the logs are identical. That concerns apstra event log and syslog evidence distinction rather than managed device discovery and system identity. The intended physical leaf is bound to the correct blueprint role and receives only its approved generated configuration.

Question 280

Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Require meaningful commit descriptions and retain controller audit evidence in change reviews.
  2. Review Apstra role assignments whenever on-call responsibilities or staff membership change.
  3. Alert on telemetry staleness and controller-agent loss separately from high interface utilization.
  4. Require hardware identity and inventory reconciliation before accepting newly discovered or replaced devices.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Require hardware identity and inventory reconciliation before accepting newly discovered or replaced devices. That is important in this case because a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration. The scenario was: Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes.

Incorrect Answers

A:

Apstra management events and revision metadata provide operational evidence of blueprint actions that the current switch state alone cannot reconstruct. Here, a managed fabric device must be associated with the correct physical identity and model so the controller generates and deploys the intended configuration.

B:

Review Apstra role assignments whenever on-call responsibilities or staff membership change. That concerns apstra role-based access control for operators, while the issue here is managed device discovery and system identity. Validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

C:

Previously collected telemetry may remain displayed after management collection stops and must not be mistaken for a live measurement. However, the present prevention decision is grounded in: Two replacement switches appear in the automation inventory and an operator assumes their descriptive hostnames alone uniquely match the blueprint nodes. For this issue, validate the discovered device details, unique system identifier and blueprint node assignment before staging configuration to the replacement.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests