McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 38

Question 370

A design authority wants consistent fabric overlay and underlay behavior across locations but starts separate blueprints without reusing the standard template policies. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Version controlled templates and review them before site-scale replication.
  2. Recompute spine port and bandwidth demand before modifying the number of racks or uplinks per leaf.
  3. Record breakout limitations in the device profile compatibility review for every new rack type.
  4. Review endpoint attachment diversity in rack-type design approvals and connectivity tests.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Version controlled templates and review them before site-scale replication. That is important in this case because apstra templates compose reusable design elements and networking policies into a blueprint starting structure, including its supported fabric topology. The scenario was: A design authority wants consistent fabric overlay and underlay behavior across locations but starts separate blueprints without reusing the standard template policies.

Incorrect Answers

B:

Recompute spine port and bandwidth demand before modifying the number of racks or uplinks per leaf. That concerns spine-capacity planning from oversubscription, while the issue here is template selection and Clos topology policy. Select or revise the approved template and verify its rack types, spine layout and protocol policy before creating the site blueprint.

C:

Physical port breakout and available speed modes constrain which logical port groups can be mapped to actual switch interfaces. However, the present prevention decision is grounded in: A design authority wants consistent fabric overlay and underlay behavior across locations but starts separate blueprints without reusing the standard template policies. For this issue, select or revise the approved template and verify its rack types, spine layout and protocol policy before creating the site blueprint.

D:

Review endpoint attachment diversity in rack-type design approvals and connectivity tests. Here, apstra templates compose reusable design elements and networking policies into a blueprint starting structure, including its supported fabric topology.

Question 371

Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.
  2. Design tags provide organizational metadata for discovering and grouping catalog objects; tags do not themselves define forwarding or fabric port behavior.
  3. An Apstra logical device models port counts, speeds and roles without requiring a specific vendor hardware platform at the initial design stage.
  4. Apstra design catalog elements may be embedded or instantiated into blueprints and existing blueprint-local configuration must be reviewed when global definitions change.

Explanation

Correct Answer

A:

The fault is not established by a generic firewall symptom alone. Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

Incorrect Answers

B:

Design tags provide organizational metadata for discovering and grouping catalog objects; tags do not themselves define forwarding or fabric port behavior. That concerns design tags for logical organization, while the issue here is spine-capacity planning from oversubscription. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

C:

An Apstra logical device models port counts, speeds and roles without requiring a specific vendor hardware platform at the initial design stage. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

D:

Apstra design catalog elements may be embedded or instantiated into blueprints and existing blueprint-local configuration must be reviewed when global definitions change. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Question 372

Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect and correct the logical-to-physical interface mapping, including selected port groups and supported speeds, before assigning it to the blueprint device.
  2. Verify the vendor-supported breakout profile, media and resulting lane count before adapting the logical device and interface map.
  3. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.
  4. Update the rack-type generic system connectivity so the intended separate leaf attachments are represented and validated against cabling.

Explanation

Correct Answer

C:

This action directly fixes the documented constraint: Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions. Apply it to the reported case: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. Then verify: Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

Incorrect Answers

A:

An Apstra interface map binds a logical device's role and speed abstractions to concrete interfaces in a supported device profile. However, the present correction decision is grounded in: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

B:

Verify the vendor-supported breakout profile, media and resulting lane count before adapting the logical device and interface map. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

D:

A generic-system logical device and its links describe how external compute or storage endpoints attach to fabric leaf devices. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Question 373

Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. The team proposes: Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin. Which data-center or operational principle BEST justifies that choice?

  1. Reusable rack abstractions reduce drift, but only if their declared components match the actual infrastructure.
  2. IP transport resources and tenant overlay identifiers occupy different configuration namespaces and should be planned independently.
  3. Automated identifier assignment is reliable only when its pool represents a correct and sufficiently large planning namespace.
  4. A high-level Clos drawing is feasible only when supported physical port capacity satisfies the modeled connectivity.

Explanation

Correct Answer

D:

This principle links classification and policy semantics to the relevant failure. A high-level Clos drawing is feasible only when supported physical port capacity satisfies the modeled connectivity. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions. The remedy under discussion is: Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

Incorrect Answers

A:

An Apstra rack type models repeated rack structure using logical leaf/access/generic devices and their intended links independent of vendor model. However, the present principle decision is grounded in: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

B:

IP transport resources and tenant overlay identifiers occupy different configuration namespaces and should be planned independently. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

C:

Automated identifier assignment is reliable only when its pool represents a correct and sufficiently large planning namespace. That concerns ASN resource pool allocation in design rather than spine-capacity planning from oversubscription. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

Question 374

Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. After applying this change—Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.—which observation BEST demonstrates success?

  1. The targeted blueprint explicitly contains the intended revised role or port map after a controlled commit, while unrelated fabrics are not silently altered.
  2. The same logical rack requirements can be evaluated against more than one compatible hardware profile without altering the intended port roles.
  3. The staging team finds the correct reviewed design object and its actual port/role definitions remain unchanged by tag labels.
  4. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

Explanation

Correct Answer

D:

The criterion directly exercises the affected flow or security object: Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target. The original condition was: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. The relevant correction is: Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

Incorrect Answers

A:

The targeted blueprint explicitly contains the intended revised role or port map after a controlled commit, while unrelated fabrics are not silently altered. That concerns global design catalog versus blueprint-local copy, while the issue here is spine-capacity planning from oversubscription. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

B:

An Apstra logical device models port counts, speeds and roles without requiring a specific vendor hardware platform at the initial design stage. However, the present verification decision is grounded in: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

C:

The staging team finds the correct reviewed design object and its actual port/role definitions remain unchanged by tag labels. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Question 375

Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Recompute spine port and bandwidth demand before modifying the number of racks or uplinks per leaf.
  2. Review endpoint attachment diversity in rack-type design approvals and connectivity tests.
  3. Requalify interface maps on hardware model changes, not only the template name.
  4. Version controlled templates and review them before site-scale replication.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions. Apply the recurring practice: Recompute spine port and bandwidth demand before modifying the number of racks or uplinks per leaf. The previous example was: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs.

Incorrect Answers

B:

Review endpoint attachment diversity in rack-type design approvals and connectivity tests. That concerns dual-attached generic system planning, while the issue here is spine-capacity planning from oversubscription. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

C:

An Apstra interface map binds a logical device's role and speed abstractions to concrete interfaces in a supported device profile. However, the present prevention decision is grounded in: Twenty leaves each require two 100G spine-facing uplinks, but the capacity plan assumes a pair of spines with fewer usable 100G ports than the topology needs. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

D:

Version controlled templates and review them before site-scale replication. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Question 376

A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. An Apstra rack type models repeated rack structure using logical leaf/access/generic devices and their intended links independent of vendor model.
  2. Underlay interface and loopback addressing requires available appropriately scoped address resources independent of tenant overlay identifiers.
  3. Apstra resource pools provide managed allocation of identifiers such as ASNs for the chosen fabric policy and must avoid unintended exhaustion or overlap.
  4. Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Explanation

Correct Answer

D:

Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

Incorrect Answers

A:

An Apstra rack type models repeated rack structure using logical leaf/access/generic devices and their intended links independent of vendor model. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

B:

Underlay interface and loopback addressing requires available appropriately scoped address resources independent of tenant overlay identifiers. That concerns IP address pool sizing for fabric links, while the issue here is spine-capacity planning from oversubscription. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

C:

Apstra resource pools provide managed allocation of identifiers such as ASNs for the chosen fabric policy and must avoid unintended exhaustion or overlap. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

Question 377

A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. Which configuration or operational action MOST directly addresses the problem?

  1. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.
  2. Create or choose a logical device with the required spine, host and generic port roles, reserving actual hardware mapping for the interface-map stage.
  3. Apply an approved tagging convention and use tagged catalog searches to select the intended logical device, rack type or template.
  4. Inspect the blueprint's current embedded object and the revised global catalog version; stage and validate an approved site-specific update where supported.

Explanation

Correct Answer

A:

Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin. The target behavior is demonstrated when every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

Incorrect Answers

B:

Create or choose a logical device with the required spine, host and generic port roles, reserving actual hardware mapping for the interface-map stage. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

C:

Apply an approved tagging convention and use tagged catalog searches to select the intended logical device, rack type or template. That concerns design tags for logical organization rather than spine-capacity planning from oversubscription. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

D:

The alternative applies to another Juniper security situation: A global rack type is updated for new server port speeds, and an operator assumes every already-created site blueprint automatically receives that change without review. That situation concerns apstra design catalog elements may be embedded or instantiated into blueprints and existing blueprint-local configuration must be reviewed when global definitions change. Its key condition is spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Question 378

A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. The team proposes: Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin. Which data-center or operational principle BEST justifies that choice?

  1. A template is part of the design contract for the network, not an arbitrary cosmetic starting screen.
  2. A high-level Clos drawing is feasible only when supported physical port capacity satisfies the modeled connectivity.
  3. A correct logical port role does not guarantee correct cabling unless its hardware port mapping is validated.
  4. Redundant endpoint networking must be represented at the attachment topology, not only described in a rack name.

Explanation

Correct Answer

B:

A high-level Clos drawing is feasible only when supported physical port capacity satisfies the modeled connectivity. It justifies the proposed change (Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.) for the precise reported case: A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom.

Incorrect Answers

A:

Apstra templates compose reusable design elements and networking policies into a blueprint starting structure, including its supported fabric topology. However, the present principle decision is grounded in: A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. For this issue, calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

C:

A correct logical port role does not guarantee correct cabling unless its hardware port mapping is validated. That concerns interface map matching logical roles to hardware rather than spine-capacity planning from oversubscription. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

D:

A generic-system logical device and its links describe how external compute or storage endpoints attach to fabric leaf devices. For the current principle question, the evidence instead states: A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Question 379

A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. After applying this change—Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.—which observation BEST demonstrates success?

  1. Each relevant managed device receives the intended ASN from the authorized range without collision or allocation failure.
  2. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.
  3. Multiple rack instances inherit the correct intended structure while individual hardware models remain assignable during build.
  4. All modeled managed interfaces receive unique valid addresses and the blueprint resource validation reports no pool exhaustion.

Explanation

Correct Answer

B:

The configuration is not validated merely by a successful commit. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target. Spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

Incorrect Answers

A:

Each relevant managed device receives the intended ASN from the authorized range without collision or allocation failure. That concerns ASN resource pool allocation in design, while the issue here is spine-capacity planning from oversubscription. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

C:

Multiple rack instances inherit the correct intended structure while individual hardware models remain assignable during build. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

D:

All modeled managed interfaces receive unique valid addresses and the blueprint resource validation reports no pool exhaustion. That concerns IP address pool sizing for fabric links rather than spine-capacity planning from oversubscription. Every planned leaf-to-spine link fits an actual supported port and the accepted oversubscription ratio remains within the target.

Question 380

A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Track object versions and dependencies between shared design catalogs and deployed blueprints.
  2. Record breakout limitations in the device profile compatibility review for every new rack type.
  3. Recompute spine port and bandwidth demand before modifying the number of racks or uplinks per leaf.
  4. Validate logical port capacity and role allocation before approving physical device models for a template.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Recompute spine port and bandwidth demand before modifying the number of racks or uplinks per leaf. A high-level Clos drawing is feasible only when supported physical port capacity satisfies the modeled connectivity.

Incorrect Answers

A:

Apstra design catalog elements may be embedded or instantiated into blueprints and existing blueprint-local configuration must be reviewed when global definitions change. For the current prevention question, the evidence instead states: A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions.

B:

Record breakout limitations in the device profile compatibility review for every new rack type. That concerns interface breakout capabilities in design, while the issue here is spine-capacity planning from oversubscription. Calculate required spine-facing port counts and bandwidth from planned leaf uplinks, compare compatible device capacity and reserve documented growth margin.

D:

Validate logical port capacity and role allocation before approving physical device models for a template. Here, spine port inventory and fabric uplink demand must reconcile with the topology's link count, speed and growth assumptions. Specifically for the prevention question, the case to validate is: A data center doubles rack count while keeping a fixed two-spine hardware selection, ignoring both the physical fabric port budget and desired uplink headroom.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests