McAfee Secure

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 2

Question 10

At the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. Which explanation best accounts for the failure?

  1. High-capacity rebuild exposure can make insufficient parity protection a material data-availability risk
  2. Control and data coordination can become unreliable when the cluster interconnect topology is degraded
  3. Striping without redundant parity cannot reconstruct data after independent drive failures
  4. Raw drive capacity is not equal to safely usable aggregate capacity after redundancy and reserves

Explanation

Correct Answer

C:

The situation shows that striping without redundant parity cannot reconstruct data after independent drive failures, rather than merely a monitoring or presentation issue. Remediation is to configure an appropriate supported RAID-DP protection layout for the available disks. This result addresses the stated challenge at the Ashbourne logistics data center team.

Incorrect Answers

A:

“High-capacity rebuild exposure can make insufficient parity protection a material data-availability risk” is not the controlling explanation for at the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. The cited causal relationship is it requires the team to revalidate RAID group protection after disk replacements and capacity expansion. The matching answer is “Striping without redundant parity cannot reconstruct data after independent drive failures”.

B:

Although control and data coordination can become unreliable when the cluster interconnect topology is degraded, the presented symptoms do not support that as the primary cause; they indicate that striping without redundant parity cannot reconstruct data after independent drive failures. For the Ashbourne logistics data center team, the direct corrective action is to configure an appropriate supported RAID-DP protection layout for the available disks.

D:

Raw drive capacity is not equal to safely usable aggregate capacity after redundancy and reserves. That may occur elsewhere, but the evidence at the Ashbourne logistics data center team instead points to the fact that striping without redundant parity cannot reconstruct data after independent drive failures.

Question 11

At the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. What evidence would best demonstrate that the requirement is met?

  1. The deployed RAID group matches the selected supported parity scheme and passes health verification
  2. A supported pilot boots the virtual storage instance and serves the required test workload
  3. A test dataset follows the approved tiering behavior and active-file latency remains within tolerance
  4. A reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement

Explanation

Correct Answer

D:

The team can confirm the fix by showing that a reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement. This aligns with the corrective design to configure an appropriate supported RAID-DP protection layout for the available disks. This result addresses the stated challenge at the Ashbourne logistics data center team.

Incorrect Answers

A:

Evidence that “The deployed RAID group matches the selected supported parity scheme and passes health verification” occurred would not by itself establish resolution of the reported problem: at the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. The specific reason is it requires the team to revalidate RAID group protection after disk replacements and capacity expansion. The applicable verification is “A reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement”.

B:

Evidence that “A supported pilot boots the virtual storage instance and serves the required test workload” occurred would not by itself establish resolution of the reported problem: at the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. The specific reason is it requires the team to revalidate RAID group protection after disk replacements and capacity expansion. The applicable verification is “A reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement”.

C:

Evidence that “A test dataset follows the approved tiering behavior and active-file latency remains within tolerance” occurred would not by itself establish resolution of the reported problem: at the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. The specific reason is it requires the team to revalidate RAID group protection after disk replacements and capacity expansion. The applicable verification is “A reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement”.

Question 12

At the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. Which ongoing control best prevents this failure from recurring?

  1. Review SAN host compatibility and performance before expanding block workloads
  2. Review managed service version and feature availability before migration
  3. Monitor tiering and recall activity after changing application access patterns
  4. Revalidate RAID group protection after disk replacements and capacity expansion

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to revalidate RAID group protection after disk replacements and capacity expansion. This result addresses the stated challenge at the Ashbourne logistics data center team.

Incorrect Answers

A:

That routine supports asa block workload platform selection, but the relevant ongoing risk requires the team to revalidate RAID group protection after disk replacements and capacity expansion. For the Ashbourne logistics data center team, the direct corrective action is to configure an appropriate supported RAID-DP protection layout for the available disks.

B:

“Review managed service version and feature availability before migration” checks a different ongoing risk rather than the reported failure: at the Ashbourne logistics data center team, an ONTAP disk group needs resilience against two concurrent drive failures but an administrator assumes simple striping provides protection. The relevant mechanism is it requires the team to revalidate RAID group protection after disk replacements and capacity expansion. The directly matched preventive control is “Revalidate RAID group protection after disk replacements and capacity expansion”.

C:

Monitor tiering and recall activity after changing application access patterns is not the primary recurring safeguard for this problem. The team should revalidate RAID group protection after disk replacements and capacity expansion. For the Ashbourne logistics data center team, the direct corrective action is to configure an appropriate supported RAID-DP protection layout for the available disks.

Question 13

At the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. Which implementation choice best addresses the issue?

  1. Reserve supported spare capacity based on drive type and protection requirements
  2. Plan capacity growth using supported RAID group layout usable capacity and spare requirements
  3. Choose a supported Cloud Volumes ONTAP deployment with appropriate cloud disks licensing and networking
  4. Assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required

Explanation

Correct Answer

D:

The primary failure mode is that high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk. The proposed action directly fixes it by requiring the team to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required; afterward, verify that the deployed RAID group matches the selected supported parity scheme and passes health verification. This result addresses the stated challenge at the Quayside payment infrastructure operations group.

Incorrect Answers

A:

This alternative would be suitable where a disk failure may leave protection degraded longer when no compatible replacement spare is available. It does not by itself resolve the need to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required. For the Quayside payment infrastructure operations group, the direct corrective action is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

B:

Plan capacity growth using supported RAID group layout usable capacity and spare requirements addresses a different kind of problem: raw drive capacity is not equal to safely usable aggregate capacity after redundancy and reserves. Here the reported weakness is that high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk. For the Quayside payment infrastructure operations group, the direct corrective action is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

C:

The option addresses the separate situation where a cloud storage implementation is constrained by cloud instance and disk services rather than on-prem shelf cabling. For this case, the more appropriate response is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required. For the Quayside payment infrastructure operations group, the direct corrective action is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

Question 14

At the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. Which issue should the team identify as the primary cause?

  1. Purpose-built block-focused arrays and unified NAS designs have different provisioning and operational characteristics
  2. High-capacity rebuild exposure can make insufficient parity protection a material data-availability risk
  3. A software-defined storage appliance still depends on supported hypervisor disks resources and network design
  4. Virtualizing storage controllers does not remove underlying host network or datastore dependencies

Explanation

Correct Answer

B:

This identifies the root issue: high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk. At the Quayside payment infrastructure operations group, the team should therefore assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

Incorrect Answers

A:

“Purpose-built block-focused arrays and unified NAS designs have different provisioning and operational characteristics” is not the controlling explanation for at the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. The matching answer is “High-capacity rebuild exposure can make insufficient parity protection a material data-availability risk”.

C:

The proposed cause is relevant to ontap select virtual appliance sizing, but it does not explain why high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk in the reported case. For the Quayside payment infrastructure operations group, the direct corrective action is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

D:

Virtualizing storage controllers does not remove underlying host network or datastore dependencies. That is not the mechanism that accounts for the stated failure at the Quayside payment infrastructure operations group.

Question 15

At the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. What is the strongest acceptance test for this improvement?

  1. A reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement
  2. A post-change inventory shows approved versions with no device health regressions
  3. The deployed RAID group matches the selected supported parity scheme and passes health verification
  4. A representative IO test meets the required performance with the selected cloud disk configuration

Explanation

Correct Answer

C:

This tests the real business behavior: the deployed RAID group matches the selected supported parity scheme and passes health verification. It specifically checks whether the risk that high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk has been reduced. This result addresses the stated challenge at the Quayside payment infrastructure operations group.

Incorrect Answers

A:

Evidence that “A reviewed RAID layout and documented fault tolerance match the approved two-disk failure requirement” occurred would not by itself establish resolution of the reported problem: at the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. The applicable verification is “The deployed RAID group matches the selected supported parity scheme and passes health verification”.

B:

At the Quayside payment infrastructure operations group, a result about firmware and software compatibility planning would not show that the team corrected the failure where high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk.

D:

This result would validate cloud volumes ontap disk performance, not the intended improvement. The needed observation is that the deployed RAID group matches the selected supported parity scheme and passes health verification. For the Quayside payment infrastructure operations group, the direct corrective action is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

Question 16

At the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. What should be monitored or reviewed during future changes?

  1. Rebenchmark storage platform fit when application IO profiles change
  2. Review managed service version and feature availability before migration
  3. Review parity and rebuild exposure whenever larger drives or new shelves are added
  4. Reassess host placement and datastore redundancy after infrastructure changes

Explanation

Correct Answer

C:

The team should review parity and rebuild exposure whenever larger drives or new shelves are added. That recurring practice targets the same weakness, namely that high-capacity rebuild exposure can make insufficient parity protection a material data-availability risk. This result addresses the stated challenge at the Quayside payment infrastructure operations group.

Incorrect Answers

A:

Rebenchmark storage platform fit when application IO profiles change is not the primary recurring safeguard for this problem. The team should review parity and rebuild exposure whenever larger drives or new shelves are added. For the Quayside payment infrastructure operations group, the direct corrective action is to assess RAID-TEC and supported disk-group configuration for triple-parity resilience where required.

B:

“Review managed service version and feature availability before migration” checks a different ongoing risk rather than the reported failure: at the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. The directly matched preventive control is “Review parity and rebuild exposure whenever larger drives or new shelves are added”.

D:

“Reassess host placement and datastore redundancy after infrastructure changes” checks a different ongoing risk rather than the reported failure: at the Quayside payment infrastructure operations group, a large capacity-drive deployment needs a justified level of protection against multiple drive failures and relies on an unverified RAID group setting. The directly matched preventive control is “Review parity and rebuild exposure whenever larger drives or new shelves are added”.

Question 17

At the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. Which solution most directly addresses the stated requirement?

  1. Assign disks to the intended ONTAP node under the supported ownership procedure
  2. Compare validated AFF and FAS workload suitability using latency capacity and cost requirements
  3. Assess Amazon FSx for NetApp ONTAP and distinguish provider-managed infrastructure from customer-managed SVM and storage settings
  4. Follow the supported nondisruptive ONTAP upgrade sequence with service and HA checks

Explanation

Correct Answer

A:

This is the direct data-engineering remedy: assign disks to the intended ONTAP node under the supported ownership procedure. The observed risk is that unassigned media are not available for aggregate provisioning by a selected owner node; a passing acceptance check would show that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. This result addresses the stated challenge at the Cedarport media enterprise IT organization.

Incorrect Answers

B:

This focuses on aff versus fas platform fit; it does not directly correct the condition that unassigned media are not available for aggregate provisioning by a selected owner node. For the Cedarport media enterprise IT organization, the direct corrective action is to assign disks to the intended ONTAP node under the supported ownership procedure.

C:

Assess Amazon FSx for NetApp ONTAP and distinguish provider-managed infrastructure from customer-managed SVM and storage settings can be useful for another workload, but it leaves the immediate failure unresolved. Here the priority is to assign disks to the intended ONTAP node under the supported ownership procedure. For the Cedarport media enterprise IT organization, the direct corrective action is to assign disks to the intended ONTAP node under the supported ownership procedure.

D:

The suggested action is to follow the supported nondisruptive ONTAP upgrade sequence with service and HA checks, but the facts at the Cedarport media enterprise IT organization require a correction for the distinct problem that unassigned media are not available for aggregate provisioning by a selected owner node.

Question 18

At the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. What underlying problem most directly explains the observed behavior?

  1. A disk failure may leave protection degraded longer when no compatible replacement spare is available
  2. Control and data coordination can become unreliable when the cluster interconnect topology is degraded
  3. Simultaneous node outages defeat the availability that a staged upgrade process is designed to preserve
  4. Unassigned media are not available for aggregate provisioning by a selected owner node

Explanation

Correct Answer

D:

The problem stems from the fact that unassigned media are not available for aggregate provisioning by a selected owner node. A correct solution would assign disks to the intended ONTAP node under the supported ownership procedure and check that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. This result addresses the stated challenge at the Cedarport media enterprise IT organization.

Incorrect Answers

A:

The proposed cause is relevant to spare disk capacity planning, but it does not explain why unassigned media are not available for aggregate provisioning by a selected owner node in the reported case. For the Cedarport media enterprise IT organization, the direct corrective action is to assign disks to the intended ONTAP node under the supported ownership procedure.

B:

Control and data coordination can become unreliable when the cluster interconnect topology is degraded. That is not the mechanism that accounts for the stated failure at the Cedarport media enterprise IT organization.

C:

“Simultaneous node outages defeat the availability that a staged upgrade process is designed to preserve” is not the controlling explanation for at the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. The cited causal relationship is unassigned media are not available for aggregate provisioning by a selected owner node; a passing acceptance check would show that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. The matching answer is “Unassigned media are not available for aggregate provisioning by a selected owner node”.

Question 19

At the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. What evidence would justify marking this issue resolved?

  1. A disk inventory shows the new drives assigned to the expected controller and eligible for provisioning
  2. The selected array presents supported block LUNs or namespaces with the required host path behavior
  3. A service pilot mounts the approved file protocol and documents who manages hardware and software controls
  4. A controlled host maintenance exercise follows the documented recovery behavior without unexpected data loss

Explanation

Correct Answer

A:

This tests the real business behavior: a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. It specifically checks whether the risk that unassigned media are not available for aggregate provisioning by a selected owner node has been reduced. This result addresses the stated challenge at the Cedarport media enterprise IT organization.

Incorrect Answers

B:

This result would validate asa block workload platform selection, not the intended improvement. The needed observation is that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. For the Cedarport media enterprise IT organization, the direct corrective action is to assign disks to the intended ONTAP node under the supported ownership procedure.

C:

Evidence that “A service pilot mounts the approved file protocol and documents who manages hardware and software controls” occurred would not by itself establish resolution of the reported problem: at the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. The specific reason is unassigned media are not available for aggregate provisioning by a selected owner node; a passing acceptance check would show that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. The applicable verification is “A disk inventory shows the new drives assigned to the expected controller and eligible for provisioning”.

D:

Evidence that “A controlled host maintenance exercise follows the documented recovery behavior without unexpected data loss” occurred would not by itself establish resolution of the reported problem: at the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. The specific reason is unassigned media are not available for aggregate provisioning by a selected owner node; a passing acceptance check would show that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. The applicable verification is “A disk inventory shows the new drives assigned to the expected controller and eligible for provisioning”.

Question 20

At the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. What follow-up practice would reduce this risk over time?

  1. Review SAN host compatibility and performance before expanding block workloads
  2. Reassess host placement and datastore redundancy after infrastructure changes
  3. Repeat readiness checks after firmware cluster or application changes
  4. Check disk ownership after shelves controllers or spare drives are replaced

Explanation

Correct Answer

D:

The needed prevention is to check disk ownership after shelves controllers or spare drives are replaced. It directly sustains the original change to assign disks to the intended ONTAP node under the supported ownership procedure. This result addresses the stated challenge at the Cedarport media enterprise IT organization.

Incorrect Answers

A:

The option would have the team review SAN host compatibility and performance before expanding block workloads. For this situation, the preventive control should instead be to check disk ownership after shelves controllers or spare drives are replaced. For the Cedarport media enterprise IT organization, the direct corrective action is to assign disks to the intended ONTAP node under the supported ownership procedure.

B:

“Reassess host placement and datastore redundancy after infrastructure changes” checks a different ongoing risk rather than the reported failure: at the Cedarport media enterprise IT organization, new drives appear physically in a dual-controller shelf but the cluster cannot consume them because ownership has not been established. The relevant mechanism is unassigned media are not available for aggregate provisioning by a selected owner node; a passing acceptance check would show that a disk inventory shows the new drives assigned to the expected controller and eligible for provisioning. The directly matched preventive control is “Check disk ownership after shelves controllers or spare drives are replaced”.

C:

That routine supports ontap upgrade prechecks, but the relevant ongoing risk requires the team to check disk ownership after shelves controllers or spare drives are replaced. For the Cedarport media enterprise IT organization, the direct corrective action is to assign disks to the intended ONTAP node under the supported ownership procedure.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests