Question 980
Fictional Uplandia Services runs the equipment tracking workload at a primary cluster room storage site. While completing change preflight, the field handoff documents: One Fibre Channel host path stays offline after new array ports are cabled although the same host works through its other fabric. The team requires a direct technical explanation and measured acceptance check. Which preventive control most directly reduces this failure risk?
Explanation
Correct Answer
The ongoing safeguard is: Validate FC switch and storage-side aliases and zoning in the as-built plan. The recurring exposure to avoid is: The failed fabric leg may have a local zoning optics or switch-port configuration fault. A continuing effectiveness check is: The host registers the expected target path on both approved fabrics and sees stable I/O.
Incorrect Answers
The offered choice addresses: Use a standardized support escalation packet for installs and upgrades. That concerns support escalation evidence quality, rather than the specific failure described here. The deciding issue in this scenario is: The failed fabric leg may have a local zoning optics or switch-port configuration fault. The more directly applicable prevention choice is: Validate FC switch and storage-side aliases and zoning in the as-built plan.
This option focuses on: Use a site-by-site Fusion onboarding checklist with documented network owners. That can be relevant to fusion multi-site fleet prerequisites, but it does not establish the required case-specific result. The current case instead identifies: The failed fabric leg may have a local zoning optics or switch-port configuration fault. The more directly applicable prevention choice is: Validate FC switch and storage-side aliases and zoning in the as-built plan.
This alternative concerns: Create distinct monitoring and maintenance role profiles for future onboarding. It is associated with read-only handover role policy, rather than the question’s determining condition. The case instead turns on: The failed fabric leg may have a local zoning optics or switch-port configuration fault. The more directly applicable prevention choice is: Validate FC switch and storage-side aliases and zoning in the as-built plan.