McAfee Secure

Cisco 350-501 Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Training Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Training Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 28

Question 270

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A carrier wants IPv6-only clients to reach IPv4-only application servers but has no NAT64 or DNS64 plan. Which observable result most directly verifies that this network issue was resolved?

  1. The adjacency stabilizes and LSDB synchronization completes.
  2. Routes between regional areas resolve through the documented L2 backbone path.
  3. The IPv6-only client reaches the IPv4 service through a measured translation state.
  4. The selection test is performed between peers where MED comparison is actually applicable.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A carrier wants IPv6-only clients to reach IPv4-only application servers but has no NAT64 or DNS64 plan. The most directly supported response is: Engineer supported NAT64 translation with an appropriate DNS64 resolution strategy where required. Technical basis: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. Evidence of success: The IPv6-only client reaches the IPv4 service through a measured translation state. Ongoing protection: Track translation pool capacity, DNS behavior, and application protocol exceptions.

Incorrect Answers

A:

The proposed test would be relevant to: OSPF adjacency requires compatible hello parameters, not merely Layer 3 reachability. The reported problem follows from: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. Instead, verify: The IPv6-only client reaches the IPv4 service through a measured translation state.

B:

That observation tests a different mechanism: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. It cannot establish this case, whose mechanism is: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. The needed verification is: The IPv6-only client reaches the IPv4 service through a measured translation state.

D:

That observation tests a different mechanism: BGP MED is an inter-AS hint whose default comparison scope is limited and policy dependent. It cannot establish this case, whose mechanism is: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. The needed verification is: The IPv6-only client reaches the IPv4 service through a measured translation state.

Question 271

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A carrier wants IPv6-only clients to reach IPv4-only application servers but has no NAT64 or DNS64 plan. Which underlying network infrastructure principle best explains the situation?

  1. BGP Add-Paths and PIC address different multipath signaling and precomputed backup forwarding aspects.
  2. NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations.
  3. NSR maintains routing protocol state on redundant controllers and differs from neighbor-assisted graceful restart.
  4. BGP origin is one of several ordered best-path criteria, not a universal primary selector.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A carrier wants IPv6-only clients to reach IPv4-only application servers but has no NAT64 or DNS64 plan. The most directly supported response is: Engineer supported NAT64 translation with an appropriate DNS64 resolution strategy where required. Technical basis: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. Evidence of success: The IPv6-only client reaches the IPv4 service through a measured translation state. Ongoing protection: Track translation pool capacity, DNS behavior, and application protocol exceptions.

Incorrect Answers

A:

The alternative principle describes: BGP Add-Paths and PIC address different multipath signaling and precomputed backup forwarding aspects. In this question, the decisive mechanism is: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. These are distinct technical causes, even when they share a platform.

C:

The alternative principle describes: NSR maintains routing protocol state on redundant controllers and differs from neighbor-assisted graceful restart. In this question, the decisive mechanism is: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. These are distinct technical causes, even when they share a platform.

D:

The alternative principle describes: BGP origin is one of several ordered best-path criteria, not a universal primary selector. In this question, the decisive mechanism is: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. These are distinct technical causes, even when they share a platform.

Question 272

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A carrier wants IPv6-only clients to reach IPv4-only application servers but has no NAT64 or DNS64 plan. Which continuing control best reduces recurrence of this problem?

  1. Run offline prefix-policy tests before attaching routing policy to live peers.
  2. Check inbound policy, next hop, and route preferences before changing peer attributes.
  3. Validate peer advertised routes and enforce maximum route limits.
  4. Track translation pool capacity, DNS behavior, and application protocol exceptions.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: A carrier wants IPv6-only clients to reach IPv4-only application servers but has no NAT64 or DNS64 plan. The most directly supported response is: Engineer supported NAT64 translation with an appropriate DNS64 resolution strategy where required. Technical basis: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. Evidence of success: The IPv6-only client reaches the IPv4 service through a measured translation state. Ongoing protection: Track translation pool capacity, DNS behavior, and application protocol exceptions.

Incorrect Answers

A:

That recurring practice manages a separate exposure: IOS XR RPL has distinct decision syntax and default disposition behavior from IOS route maps. The present case instead depends on: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. The suitable ongoing safeguard is: Track translation pool capacity, DNS behavior, and application protocol exceptions.

B:

That recurring practice manages a separate exposure: Reception of BGP NLRI does not necessarily imply RIB or FIB installation. The present case instead depends on: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. The suitable ongoing safeguard is: Track translation pool capacity, DNS behavior, and application protocol exceptions.

C:

That recurring practice manages a separate exposure: BGP export policy is the boundary controlling which NLRI leaves an autonomous system. The present case instead depends on: NAT64 bridges IPv6 endpoints to IPv4 destinations with state and addressing considerations. The suitable ongoing safeguard is: Track translation pool capacity, DNS behavior, and application protocol exceptions.

Question 273

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Deploy suitable BFD on eligible neighbors with realistic detection timers.
  2. Design address and port allocation with subscriber logging, resource limits, and legal retention requirements.
  3. Inspect weight, local preference, and then AS-path among applicable BGP decision criteria.
  4. Deploy route reflectors using a documented cluster design and redundant client peering.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. The most directly supported response is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements. Technical basis: CGNAT multiplexes many private subscribers over limited public IPv4 address space. Evidence of success: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber. Ongoing protection: Monitor port exhaustion and data retention before scaling subscriber density.

Incorrect Answers

A:

BFD supplies fast bidirectional failure detection independently of slower protocol hello timers. That principle governs the alternative intervention. The issue described here is different: CGNAT multiplexes many private subscribers over limited public IPv4 address space. The case-matched corrective action is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements.

C:

The proposed option addresses this separate mechanism: BGP evaluates ordered criteria, so later comparisons apply only when earlier attributes are tied. The stated problem instead depends on: CGNAT multiplexes many private subscribers over limited public IPv4 address space. The required response is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements.

D:

The proposed option addresses this separate mechanism: Route reflection reduces IBGP session scale but introduces cluster and reflection-path considerations. The stated problem instead depends on: CGNAT multiplexes many private subscribers over limited public IPv4 address space. The required response is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements.

Question 274

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. Which observable result most directly verifies that this network issue was resolved?

  1. Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber.
  2. Only approved more-specific prefixes are accepted and forwarding follows actual installed longest matches.
  3. A policy test shows the correct sequence is reached for each representative prefix class.
  4. The selected best path matches configured attributes rather than inferred geographic proximity.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. The most directly supported response is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements. Technical basis: CGNAT multiplexes many private subscribers over limited public IPv4 address space. Evidence of success: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber. Ongoing protection: Monitor port exhaustion and data retention before scaling subscriber density.

Incorrect Answers

B:

BGP routing policy controls prefix acceptance, while forwarding uses the most specific installed route. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: CGNAT multiplexes many private subscribers over limited public IPv4 address space. A passing check should show: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber.

C:

Many routing policies use ordered evaluation where the first decisive match controls the outcome. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: CGNAT multiplexes many private subscribers over limited public IPv4 address space. A passing check should show: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber.

D:

BGP best-path choice is policy-driven and does not simply select the fewest physical hops. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: CGNAT multiplexes many private subscribers over limited public IPv4 address space. A passing check should show: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber.

Question 275

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. Which underlying network infrastructure principle best explains the situation?

  1. Route reflection reduces IBGP session scale but introduces cluster and reflection-path considerations.
  2. CGNAT multiplexes many private subscribers over limited public IPv4 address space.
  3. IS-IS can advertise separate IPv6 reachability information independently of its IPv4 control-plane transport.
  4. Prefix-set ge and le bounds determine which subnet lengths a policy can match.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. The most directly supported response is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements. Technical basis: CGNAT multiplexes many private subscribers over limited public IPv4 address space. Evidence of success: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber. Ongoing protection: Monitor port exhaustion and data retention before scaling subscriber density.

Incorrect Answers

A:

Route reflection reduces IBGP session scale but introduces cluster and reflection-path considerations. That is not the causal relationship tested by the current facts. The relevant principle is: CGNAT multiplexes many private subscribers over limited public IPv4 address space.

C:

IS-IS can advertise separate IPv6 reachability information independently of its IPv4 control-plane transport. That is not the causal relationship tested by the current facts. The relevant principle is: CGNAT multiplexes many private subscribers over limited public IPv4 address space.

D:

Prefix-set ge and le bounds determine which subnet lengths a policy can match. That is not the causal relationship tested by the current facts. The relevant principle is: CGNAT multiplexes many private subscribers over limited public IPv4 address space.

Question 276

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. Which continuing control best reduces recurrence of this problem?

  1. Compare both peers' timer settings during maintenance.
  2. Use packet-level hello tests when control-plane filters change.
  3. Monitor port exhaustion and data retention before scaling subscriber density.
  4. Run end-to-end failure injection that includes upstream link and backend loss.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A broadband operator conserves IPv4 space by introducing CGNAT but overlooks simultaneous subscriber-port use. The most directly supported response is: Design address and port allocation with subscriber logging, resource limits, and legal retention requirements. Technical basis: CGNAT multiplexes many private subscribers over limited public IPv4 address space. Evidence of success: Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber. Ongoing protection: Monitor port exhaustion and data retention before scaling subscriber density.

Incorrect Answers

A:

OSPF adjacency requires compatible hello parameters, not merely Layer 3 reachability. Maintaining that control would not track the failure described here. The relevant risk is: CGNAT multiplexes many private subscribers over limited public IPv4 address space. Review this instead: Monitor port exhaustion and data retention before scaling subscriber density.

B:

OSPF INIT indicates a one-way neighbor relationship rather than full bidirectional discovery. Maintaining that control would not track the failure described here. The relevant risk is: CGNAT multiplexes many private subscribers over limited public IPv4 address space. Review this instead: Monitor port exhaustion and data retention before scaling subscriber density.

D:

The alternative guards against: High availability requires validating application-relevant reachability rather than only local link carrier state. The root condition for this case is: CGNAT multiplexes many private subscribers over limited public IPv4 address space. The focused prevention check is: Monitor port exhaustion and data retention before scaling subscriber density.

Question 277

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Activate the appropriate AFI/SAFI for the neighbor and advertise authorized IPv6 routes.
  2. Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation.
  3. Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices.
  4. Inspect weight, local preference, and then AS-path among applicable BGP decision criteria.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. The most directly supported response is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation. Technical basis: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Evidence of success: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR. Ongoing protection: Test AFTR redundancy, subscriber session state, and tunnel MTU.

Incorrect Answers

A:

The proposed option addresses this separate mechanism: BGP transport session establishment does not automatically enable every address family. The stated problem instead depends on: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. The required response is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation.

C:

The option fits a control for: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The present failure is caused by a different mechanism: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. The targeted implementation is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation.

D:

The option fits a control for: BGP evaluates ordered criteria, so later comparisons apply only when earlier attributes are tied. The present failure is caused by a different mechanism: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. The targeted implementation is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation.

Question 278

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. Which observable result most directly verifies that this network issue was resolved?

  1. IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR.
  2. Area adjacencies form consistently and allowed external or summary advertisements return.
  3. Unauthorized more-specific routes are rejected and the authorized aggregate remains accepted.
  4. Traffic shifts rapidly to the validated backup next hop under controlled node failure.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. The most directly supported response is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation. Technical basis: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Evidence of success: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR. Ongoing protection: Test AFTR redundancy, subscriber session state, and tunnel MTU.

Incorrect Answers

B:

The proposed test would be relevant to: OSPF area types determine which external and summary LSAs may be flooded. The reported problem follows from: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Instead, verify: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR.

C:

The proposed test would be relevant to: Prefix-set ge and le bounds determine which subnet lengths a policy can match. The reported problem follows from: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Instead, verify: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR.

D:

The proposed test would be relevant to: BGP PIC precomputes viable alternate paths to reduce route-by-route failover delay. The reported problem follows from: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Instead, verify: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR.

Question 279

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. Which underlying network infrastructure principle best explains the situation?

  1. DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR.
  2. OSPF adjacency requires compatible hello parameters, not merely Layer 3 reachability.
  3. BGP export policy is the boundary controlling which NLRI leaves an autonomous system.
  4. Level-1 IS-IS neighbors require compatible area membership, while L2 behavior differs.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. The most directly supported response is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation. Technical basis: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Evidence of success: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR. Ongoing protection: Test AFTR redundancy, subscriber session state, and tunnel MTU.

Incorrect Answers

B:

The option explains a separate issue: OSPF adjacency requires compatible hello parameters, not merely Layer 3 reachability. The reported condition instead follows from: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR.

C:

The option explains a separate issue: BGP export policy is the boundary controlling which NLRI leaves an autonomous system. The reported condition instead follows from: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR.

D:

The option explains a separate issue: Level-1 IS-IS neighbors require compatible area membership, while L2 behavior differs. The reported condition instead follows from: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR.

Question 280

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. Which continuing control best reduces recurrence of this problem?

  1. Track adjacency and per-family prefix counters separately.
  2. Maintain separate IPv4 and IPv6 adjacency/route acceptance tests.
  3. Test AFTR redundancy, subscriber session state, and tunnel MTU.
  4. Keep policy unit tests that include overlapping prefix-set cases.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A transition design calls DS-Lite a simple stateless IPv6-to-IPv4 address conversion and ignores the AFTR. The most directly supported response is: Deploy a DS-Lite customer B4-to-AFTR IPv4-over-IPv6 tunneling path with provider-side translation. Technical basis: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. Evidence of success: IPv4 subscriber traffic traverses the IPv6 access core and is translated at the AFTR. Ongoing protection: Test AFTR redundancy, subscriber session state, and tunnel MTU.

Incorrect Answers

A:

The alternative guards against: A live IS-IS adjacency does not guarantee all address-family reachability is exchanged. The root condition for this case is: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. The focused prevention check is: Test AFTR redundancy, subscriber session state, and tunnel MTU.

B:

The alternative guards against: OSPFv3 was designed for IPv6 routing information and has protocol differences from OSPFv2. The root condition for this case is: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. The focused prevention check is: Test AFTR redundancy, subscriber session state, and tunnel MTU.

D:

That recurring practice manages a separate exposure: Many routing policies use ordered evaluation where the first decisive match controls the outcome. The present case instead depends on: DS-Lite tunnels IPv4 within IPv6 access transport and uses shared translation at the AFTR. The suitable ongoing safeguard is: Test AFTR redundancy, subscriber session state, and tunnel MTU.