McAfee Secure

Cisco 350-501 Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Training Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Training Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 51

Question 500

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A customer is handed a provider service at an Ethernet access UNI that leads to another carrier rather than a standard direct subscriber site. Which continuing control best reduces recurrence of this problem?

  1. Monitor MLD membership expiry and snooping behavior on access switches.
  2. Monitor MAC mobility and route-target imports after adding remote sites.
  3. Audit interoperator VLAN mapping and service ownership before changes.
  4. Validate service-label disposition during line-card or PE upgrades.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A customer is handed a provider service at an Ethernet access UNI that leads to another carrier rather than a standard direct subscriber site. The most directly supported response is: Use a defined E-Access service arrangement with the correct operator-to-operator handoff terms. Technical basis: E-Access is intended for wholesale Ethernet access arrangements involving operator connectivity. Evidence of success: The interoperator handoff carries only the agreed service VLANs and UNI attributes. Ongoing protection: Audit interoperator VLAN mapping and service ownership before changes.

Incorrect Answers

A:

That recurring practice manages a separate exposure: MLD manages IPv6 multicast listener subscriptions, playing a role analogous to IGMP for IPv4. The present case instead depends on: E-Access is intended for wholesale Ethernet access arrangements involving operator connectivity. The suitable ongoing safeguard is: Audit interoperator VLAN mapping and service ownership before changes.

B:

That recurring practice manages a separate exposure: EVPN distributes Ethernet reachability through BGP control-plane information and service-specific isolation. The present case instead depends on: E-Access is intended for wholesale Ethernet access arrangements involving operator connectivity. The suitable ongoing safeguard is: Audit interoperator VLAN mapping and service ownership before changes.

D:

L3VPN service labels identify forwarding treatment and the destination VRF or adjacency. Maintaining that control would not track the failure described here. The relevant risk is: E-Access is intended for wholesale Ethernet access arrangements involving operator connectivity. Review this instead: Audit interoperator VLAN mapping and service ownership before changes.

Question 501

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags.
  2. Choose a shaping or policing treatment based on the service contract and required burst behavior.
  3. Publish only necessary service prefixes and return reachability through controlled extranet VRF policies.
  4. Use separate route distinguishers and route-target import policy for the two VPN control-plane contexts.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. The most directly supported response is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags. Technical basis: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. Evidence of success: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier. Ongoing protection: Check MTU headroom and double-tag filtering across the provider network.

Incorrect Answers

B:

Traffic shaping buffers and paces excess traffic while policing typically drops or remarks nonconforming packets. That principle governs the alternative intervention. The issue described here is different: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. The case-matched corrective action is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags.

C:

The proposed option addresses this separate mechanism: An MPLS L3VPN extranet selectively shares service routes while retaining tenant separation. The stated problem instead depends on: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. The required response is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags.

D:

The proposed option addresses this separate mechanism: VPN route distinguishers make otherwise identical prefixes distinct while route targets control membership. The stated problem instead depends on: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. The required response is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags.

Question 502

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. Which observable result most directly verifies that this network issue was resolved?

  1. The remote network resolves the moved MAC to the current attachment site without persistent blackholing.
  2. The access router records IPv6 multicast listener state and forwards selected groups.
  3. A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier.
  4. Each tenant reaches the DNS service without receiving another tenant's private routes.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. The most directly supported response is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags. Technical basis: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. Evidence of success: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier. Ongoing protection: Check MTU headroom and double-tag filtering across the provider network.

Incorrect Answers

A:

That observation tests a different mechanism: EVPN MAC mobility signaling tracks changes in a host's attachment location. It cannot establish this case, whose mechanism is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. The needed verification is: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier.

B:

MLD manages IPv6 multicast listener subscriptions, playing a role analogous to IGMP for IPv4. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. A passing check should show: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier.

D:

An MPLS L3VPN extranet selectively shares service routes while retaining tenant separation. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. A passing check should show: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier.

Question 503

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. Which underlying network infrastructure principle best explains the situation?

  1. PIM-BIDIR supports a bidirectional shared-tree multicast model suited to appropriate many-to-many scenarios.
  2. Inter-AS VPN designs extend customer VPN transport across separate service provider administrative domains.
  3. Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation.
  4. L3VPN membership is controlled by route targets rather than IP prefix uniqueness alone.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. The most directly supported response is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags. Technical basis: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. Evidence of success: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier. Ongoing protection: Check MTU headroom and double-tag filtering across the provider network.

Incorrect Answers

A:

PIM-BIDIR supports a bidirectional shared-tree multicast model suited to appropriate many-to-many scenarios. That is not the causal relationship tested by the current facts. The relevant principle is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation.

B:

Inter-AS VPN designs extend customer VPN transport across separate service provider administrative domains. That is not the causal relationship tested by the current facts. The relevant principle is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation.

D:

L3VPN membership is controlled by route targets rather than IP prefix uniqueness alone. That is not the causal relationship tested by the current facts. The relevant principle is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation.

Question 504

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. Which continuing control best reduces recurrence of this problem?

  1. Monitor RP availability and group-to-RP mapping consistency.
  2. Check MTU headroom and double-tag filtering across the provider network.
  3. Check layered transport and VPN label state during PE provisioning.
  4. Monitor latency, loss and queue depth under representative demand.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A wholesale Ethernet trunk must distinguish provider service VLANs from overlapping customer VLAN IDs but currently strips every inner tag. The most directly supported response is: Use supported IEEE 802.1ad provider bridging with controlled outer service tags and preserved inner customer tags. Technical basis: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. Evidence of success: A test frame retains its customer tag while the carrier forwarding uses the service VLAN identifier. Ongoing protection: Check MTU headroom and double-tag filtering across the provider network.

Incorrect Answers

A:

PIM-SM initially uses rendezvous-point mechanisms to discover multicast sources for group trees. Maintaining that control would not track the failure described here. The relevant risk is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. Review this instead: Check MTU headroom and double-tag filtering across the provider network.

C:

MPLS L3VPN forwarding depends on both service-label import and transport next-hop resolution. Maintaining that control would not track the failure described here. The relevant risk is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. Review this instead: Check MTU headroom and double-tag filtering across the provider network.

D:

The alternative guards against: Congestion avoidance manages buffer occupancy and early drops, distinct from ingress classification. The root condition for this case is: Q-in-Q stacks a provider service tag outside the customer's VLAN tag to expand service isolation. The focused prevention check is: Check MTU headroom and double-tag filtering across the provider network.

Question 505

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Apply ingress remarking and a carrier-controlled MPLS class mapping at the trust boundary.
  2. Engineer diverse PE attachments and approved MP-BGP/underlay backup path selection.
  3. Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link.
  4. Design supported multicast VPN service signaling and forwarding for the affected customer VRFs.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. The most directly supported response is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link. Technical basis: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Evidence of success: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping. Ongoing protection: Test ring-protection state and recovery after every ring expansion.

Incorrect Answers

A:

The proposed option addresses this separate mechanism: Carrier MPLS EXP/TC treatment must follow approved classification rather than arbitrary customer marking. The stated problem instead depends on: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. The required response is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link.

B:

The proposed option addresses this separate mechanism: L3VPN resilience depends on both VPN route availability and healthy labeled transport paths. The stated problem instead depends on: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. The required response is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link.

D:

The option fits a control for: mVPN requires multicast-capable control and forwarding information beyond ordinary unicast VPN prefixes. The present failure is caused by a different mechanism: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. The targeted implementation is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link.

Question 506

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. Which observable result most directly verifies that this network issue was resolved?

  1. A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping.
  2. Tenant traffic reaches the permitted Internet gateway without exposing unrelated private tenant prefixes.
  3. The receiving PEs show appropriate multicast VPN state and receive only authorized multicast groups.
  4. RPF state points toward the selected source path and expected packets forward downstream.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. The most directly supported response is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link. Technical basis: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Evidence of success: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping. Ongoing protection: Test ring-protection state and recovery after every ring expansion.

Incorrect Answers

B:

The proposed test would be relevant to: Shared services require explicit VRF route exchange boundaries to preserve multi-tenant isolation. The reported problem follows from: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Instead, verify: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping.

C:

The proposed test would be relevant to: mVPN requires multicast-capable control and forwarding information beyond ordinary unicast VPN prefixes. The reported problem follows from: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Instead, verify: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping.

D:

The proposed test would be relevant to: Multicast reverse-path forwarding prevents looping traffic by checking upstream source reachability. The reported problem follows from: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Instead, verify: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping.

Question 507

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. Which underlying network infrastructure principle best explains the situation?

  1. L3VPN service labels identify forwarding treatment and the destination VRF or adjacency.
  2. G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops.
  3. VPN route distinguishers make otherwise identical prefixes distinct while route targets control membership.
  4. MLD manages IPv6 multicast listener subscriptions, playing a role analogous to IGMP for IPv4.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. The most directly supported response is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link. Technical basis: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Evidence of success: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping. Ongoing protection: Test ring-protection state and recovery after every ring expansion.

Incorrect Answers

A:

The option explains a separate issue: L3VPN service labels identify forwarding treatment and the destination VRF or adjacency. The reported condition instead follows from: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops.

C:

The option explains a separate issue: VPN route distinguishers make otherwise identical prefixes distinct while route targets control membership. The reported condition instead follows from: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops.

D:

The option explains a separate issue: MLD manages IPv6 multicast listener subscriptions, playing a role analogous to IGMP for IPv4. The reported condition instead follows from: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops.

Question 508

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. Which continuing control best reduces recurrence of this problem?

  1. Test client membership capabilities before introducing SSM-only services.
  2. Test ring-protection state and recovery after every ring expansion.
  3. Test QoS performance under congestion, not only when links are idle.
  4. Check layered transport and VPN label state during PE provisioning.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A metro ring runs Ethernet protection but a loop persists after a fiber repair because its ring protection control is incomplete. The most directly supported response is: Configure supported ITU-T G.8032 Ethernet Ring Protection with the intended blocked ring link. Technical basis: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. Evidence of success: A simulated single-link failure reestablishes traffic on the ring without sustained Layer 2 looping. Ongoing protection: Test ring-protection state and recovery after every ring expansion.

Incorrect Answers

A:

The alternative guards against: IGMPv3 extends group membership to source-specific reception; older IGMP versions differ. The root condition for this case is: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. The focused prevention check is: Test ring-protection state and recovery after every ring expansion.

C:

The alternative guards against: Marking identifies classes; enforcement comes from queueing, shaping, and policer configuration. The root condition for this case is: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. The focused prevention check is: Test ring-protection state and recovery after every ring expansion.

D:

That recurring practice manages a separate exposure: MPLS L3VPN forwarding depends on both service-label import and transport next-hop resolution. The present case instead depends on: G.8032 coordinates ring protection switching to maintain connectivity while preventing Ethernet loops. The suitable ongoing safeguard is: Test ring-protection state and recovery after every ring expansion.

Question 509

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A customer complains of intermittent Ethernet loss while operators only ping IP endpoints over an otherwise isolated L2 service. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Design EVPN control-plane advertisement with tenant-specific bridge domains and approved MAC reachability.
  2. Use Ethernet OAM continuity and fault-management measurements for the specified EVC.
  3. Use PIM-SSM with an appropriate source-specific membership protocol.
  4. Restore underlay labeled reachability to the remote PE loopback before using the VPN path.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A customer complains of intermittent Ethernet loss while operators only ping IP endpoints over an otherwise isolated L2 service. The most directly supported response is: Use Ethernet OAM continuity and fault-management measurements for the specified EVC. Technical basis: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. Evidence of success: Continuity-check and link-trace results isolate the failing Ethernet service segment. Ongoing protection: Include service OAM health checks in Carrier Ethernet maintenance.

Incorrect Answers

A:

The option fits a control for: EVPN distributes Ethernet reachability through BGP control-plane information and service-specific isolation. The present failure is caused by a different mechanism: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. The targeted implementation is: Use Ethernet OAM continuity and fault-management measurements for the specified EVC.

C:

Source-Specific Multicast explicitly binds receivers to a source and group, typically avoiding RP-based discovery. That principle governs the alternative intervention. The issue described here is different: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. The case-matched corrective action is: Use Ethernet OAM continuity and fault-management measurements for the specified EVC.

D:

MPLS L3VPN forwarding depends on both service-label import and transport next-hop resolution. That principle governs the alternative intervention. The issue described here is different: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. The case-matched corrective action is: Use Ethernet OAM continuity and fault-management measurements for the specified EVC.

Question 510

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A customer complains of intermittent Ethernet loss while operators only ping IP endpoints over an otherwise isolated L2 service. Which observable result most directly verifies that this network issue was resolved?

  1. The receiving PEs show appropriate multicast VPN state and receive only authorized multicast groups.
  2. The access router records IPv6 multicast listener state and forwards selected groups.
  3. Egress traffic stays within the contractual aggregate rate while child classes maintain priorities.
  4. Continuity-check and link-trace results isolate the failing Ethernet service segment.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: A customer complains of intermittent Ethernet loss while operators only ping IP endpoints over an otherwise isolated L2 service. The most directly supported response is: Use Ethernet OAM continuity and fault-management measurements for the specified EVC. Technical basis: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. Evidence of success: Continuity-check and link-trace results isolate the failing Ethernet service segment. Ongoing protection: Include service OAM health checks in Carrier Ethernet maintenance.

Incorrect Answers

A:

The proposed test would be relevant to: mVPN requires multicast-capable control and forwarding information beyond ordinary unicast VPN prefixes. The reported problem follows from: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. Instead, verify: Continuity-check and link-trace results isolate the failing Ethernet service segment.

B:

That observation tests a different mechanism: MLD manages IPv6 multicast listener subscriptions, playing a role analogous to IGMP for IPv4. It cannot establish this case, whose mechanism is: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. The needed verification is: Continuity-check and link-trace results isolate the failing Ethernet service segment.

C:

That observation tests a different mechanism: Hierarchical QoS can combine aggregate shaping with per-class scheduling for shared access links. It cannot establish this case, whose mechanism is: Ethernet OAM can measure service connectivity independently of customer Layer 3 routing. The needed verification is: Continuity-check and link-trace results isolate the failing Ethernet service segment.