McAfee Secure

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 4

Question 30

A temporary contractor network must permit new FortiGate connections only from 09:00 to 17:00 on weekdays and existing sessions must also terminate promptly at 17:00. What is the most defensible FortiOS firewall policy change?

  1. Apply an approved recurring weekday-hours schedule to the narrow contractor firewall policy and enable schedule-timeout on that policy to close established sessions at expiry.
  2. Verify enabled central DNAT/VIP mappings in DNAT & Virtual IPs, authorize the inbound flow with an appropriate firewall policy, and manage central SNAT separately.
  3. Verify collector connection and domain logon acquisition before changing traffic policies.
  4. Inspect debug-flow policy matching and session logs for the actual five-tuple.

Explanation

Correct Answer

A:

An approved recurring schedule limits when new sessions may match the contractor policy, and schedule-timeout forces current sessions to terminate when the schedule expires. FortiOS defaults schedule-timeout to disabled, so both controls must be verified with an established session crossing the cutoff.

Incorrect Answers

B:

Central DNAT/VIP and central SNAT settings change address translation and forwarding, not the daily access window or the expiry of already established contractor sessions.

C:

Checking the FSSO collector and logon mappings diagnoses identity awareness, but it does not restrict weekday contractor-session start times or terminate sessions at cutoff.

D:

Debug-flow analysis shows which rule an attempted connection matches. Logging alone neither installs the approved schedule nor enforces expiry of active sessions.

Question 31

The FortiOS team has separate tasks to complete: (1) A firewall uses central SNAT but an engineer edits per-policy NAT options expecting a change. (2) A deployment requires audit for both passed and dropped traffic to a sensitive subnet. Choose TWO changes that directly address these tasks.

  1. Use active or suitable passive measurements aligned to application latency, jitter and packet-loss acceptance limits.
  2. Enable suitable traffic logging on accept and deny policies with a central log destination.
  3. Enable scoped IKE debug/logging for the peer and compare proposals, IDs and authentication.
  4. Modify the matching central SNAT rule and verify its precedence and address mapping.
  5. Inspect HA checksum/config synchronization status and locate settings that failed to replicate.

Explanation

Correct Answers

B:

This action directly satisfies independent requirement (2): Enable suitable traffic logging on accept and deny policies with a central log destination. Traffic log visibility depends on each effective policy and destination logging configuration. It should be validated by controlled accepted and denied flows both appear with correct policy IDs and actions.

D:

This action directly satisfies independent requirement (1): Modify the matching central SNAT rule and verify its precedence and address mapping. Central NAT separates translation rules from firewall policy acceptance. A useful test is that new session's translated address follows the central policy, with per-policy settings not relied on.

Incorrect Answers

A:

WAN quality decisions require metrics relevant to the application, not only liveness. In this case the first outcome requires the team to modify the matching central SNAT rule and verify its precedence and address mapping, and the second requires it to enable suitable traffic logging on accept and deny policies with a central log destination.

C:

IKE logs expose phase-one negotiation and authentication failures separately from payload policy. In this case the first outcome requires the team to modify the matching central SNAT rule and verify its precedence and address mapping, and the second requires it to enable suitable traffic logging on accept and deny policies with a central log destination.

E:

Heartbeat state and configuration-sync state are separate HA health indicators. In this case the first outcome requires the team to modify the matching central SNAT rule and verify its precedence and address mapping, and the second requires it to enable suitable traffic logging on accept and deny policies with a central log destination.

Question 32

During a network-security review the following gap is identified: A contractor uses an unmanaged device and needs browser-only access to an approved private application. What should the team configure?

  1. Inspect logging transport health, disk/buffer status and network loss before modifying firewall rules.
  2. Select an appropriate FortiSASE agentless or browser-access method with application-specific authorization.
  3. Create identity/group-aware FortiSASE access rules and verify onboarding identity mapping.
  4. Configure the supported reserved HA management interface per member with suitable routing and access.

Explanation

Correct Answer

B:

Agentless access may cover defined web workloads but should not imply all nonweb traffic is inspected. Confirmation is obtained when the contractor reaches only the approved application and no unrestricted private network path is provided.

Incorrect Answers

A:

Log transport and buffering can fail independently of policy-matched user traffic. In the reported case, agentless access may cover defined web workloads but should not imply all nonweb traffic is inspected.

C:

Secure access requires authenticated user context and policy enforcement, not only a connected agent. In the reported case, agentless access may cover defined web workloads but should not imply all nonweb traffic is inspected.

D:

HA members can require independent management addresses that are not the shared cluster interface. In the reported case, agentless access may cover defined web workloads but should not imply all nonweb traffic is inspected.

Question 33

The FortiOS team has two independent tasks: (1) Contractor connections may start only on weekdays from 09:00 to 17:00, and established sessions must end when that schedule expires. (2) An FSSO collector receives logons but FortiGate assigns users to the wrong AD groups. Which TWO changes address the separate tasks?

  1. Apply an approved recurring weekday-hours schedule to the narrow contractor firewall policy and enable schedule-timeout on that policy to close established sessions at expiry.
  2. Create or correct LAN-to-IPsec and return-path policies scoped to the protected networks/services.
  3. Create a narrow IPS exception for the evaluated signature/host while retaining others.
  4. Enable the appropriate policy logging level and confirm the correct policy matches the test traffic.
  5. Review collector group filters and the FortiGate remote group mapping to directory groups.

Explanation

Correct Answers

A:

For task (1), a recurring business-hours policy schedule controls new connections and schedule-timeout terminates existing sessions at expiry. Without that second setting, established sessions may persist after the schedule stops matching new sessions.

E:

For task (2), inspect the collector group filters and the FortiGate remote AD group selection, then verify a known user resolves to an authorized identity group. This is independent of policy scheduling.

Incorrect Answers

B:

Correct LAN-to-IPsec and return-path rules may be needed for VPN forwarding; they do not impose weekday session cutoffs or repair FortiGate FSSO group membership mapping.

C:

An IPS signature exception addresses a verified intrusion-prevention false positive. It does not enforce contractor hours or correct FSSO directory-group selection.

D:

Policy logging confirms the matched rule and aids validation, but enabling logging alone cannot enforce schedule-timeout or repair incorrect collector/group filtering.

Question 34

An auditor must validate the FortiOS configuration: Correlate accepted policy events with security-profile actions, server responses and session details. Which result demonstrates the requirement was met?

  1. Members finish on the intended release with expected HA roles and policies intact.
  2. A correlated event identifies whether the failure is an application-control or other inspection decision.
  3. The contractor reaches only the approved application and no unrestricted private network path is provided.
  4. A monitored test period has continuous log sequence and no delivery/backlog alarms.

Explanation

Correct Answer

B:

Accepting a firewall policy does not preclude later application/content inspection enforcement. The test should show that A correlated event identifies whether the failure is an application-control or other inspection decision.

Incorrect Answers

A:

HA upgrade orchestration must account for member compatibility and active traffic continuity. The stated configuration instead needs this result: a correlated event identifies whether the failure is an application-control or other inspection decision.

C:

Agentless access may cover defined web workloads but should not imply all nonweb traffic is inspected. The stated configuration instead needs this result: a correlated event identifies whether the failure is an application-control or other inspection decision.

D:

Log transport and buffering can fail independently of policy-matched user traffic. The stated configuration instead needs this result: a correlated event identifies whether the failure is an application-control or other inspection decision.

Question 35

A controlled FortiOS 7.6 test is planned for this need: A remote user can authenticate, but the required MFA factor is never challenged. Which configuration should be implemented?

  1. Place a narrowly scoped deny before the VIP accept policy and verify match-vip is enabled on that deny policy, leaving authorized VIP sources permitted.
  2. Integrate a supported MFA flow or token enforcement for the selected remote authentication method.
  3. Inspect authentication debug/log events and the later identity-group and policy match separately.
  4. Apply NAT on the effective policy for each egress interface or suitable central SNAT rules by path.

Explanation

Correct Answer

B:

Strong authentication needs explicit factor enforcement beyond a working LDAP/RADIUS bind. Confirmation is obtained when an authorized user must complete the required factor before group-protected access is allowed.

Incorrect Answers

A:

FortiGate VIP-related accept policies can take precedence over generic deny rules; match-vip is a deny-policy-specific setting that makes the deny match traffic destined for a VIP. In the reported case, strong authentication needs explicit factor enforcement beyond a working LDAP/RADIUS bind.

C:

Credential checks, user identity mapping and traffic authorization are separate steps. In the reported case, strong authentication needs explicit factor enforcement beyond a working LDAP/RADIUS bind.

D:

SNAT must be compatible with actual chosen outbound path for return traffic. In the reported case, strong authentication needs explicit factor enforcement beyond a working LDAP/RADIUS bind.

Question 36

The security team must implement a specific FortiGate control: A network needs equal-cost distribution over two uplinks toward the same destination prefix. What configuration is the best starting point?

  1. Configure lowest-cost (SLA) SD-WAN steering with member cost values, a relevant packet-loss SLA threshold and eligible members for the matched service.
  2. Use an appropriate load-balancing SD-WAN rule with two eligible SLA-passing members.
  3. Configure supported ECMP routing with eligible equal-cost next hops and suitable session handling.
  4. Use the 10.20.50.0/24 next hop for traffic to 10.20.50.7.

Explanation

Correct Answer

C:

Equal-cost multipath requires compatible route selection parameters; packet-level randomness is not implied. Confirmation is obtained when separate new sessions use available eligible routes under the configured ECMP method.

Incorrect Answers

A:

Lowest-cost SLA selects the lowest-cost member that satisfies the assigned performance SLA; if eligible member costs tie, interface preference order can decide. In the reported case, equal-cost multipath requires compatible route selection parameters; packet-level randomness is not implied.

B:

SD-WAN can load-balance sessions across multiple eligible healthy members when configured. In the reported case, equal-cost multipath requires compatible route selection parameters; packet-level randomness is not implied.

D:

More-specific matching precedes general aggregate routes for a given destination. In the reported case, equal-cost multipath requires compatible route selection parameters; packet-level randomness is not implied.

Question 37

The security team must implement a specific FortiGate control: An organization wants agentless FSSO and cannot install software on each domain controller. What configuration is the best starting point?

  1. Install the required supported DC agent on each monitored controller and route events to the collector.
  2. Bind an appropriate recurring schedule to the narrow contractor access firewall policy.
  3. Update the source address group membership to include the authorized subnet, keeping unapproved ranges out.
  4. Configure a supported AD polling connector with required rights, reachability and security event collection.

Explanation

Correct Answer

D:

Agentless AD event polling is an alternative logon collection mechanism with different prerequisites. Confirmation is obtained when new directory logons become visible in the FortiGate identity monitor without DC agents.

Incorrect Answers

A:

DC agent mode needs the logon source coverage before group maps can be trusted. In the reported case, agentless AD event polling is an alternative logon collection mechanism with different prerequisites.

B:

Firewall policy schedules participate in effective rule matching. In the reported case, agentless AD event polling is an alternative logon collection mechanism with different prerequisites.

C:

Firewall address objects and groups are matched against actual packet source and destination values. In the reported case, agentless AD event polling is an alternative logon collection mechanism with different prerequisites.

Question 38

The following change is now configured: Validate the supported inspection visibility and application signature detection on the encrypted flow. Which test result verifies the intended behavior?

  1. The effective blocking profile and reason are identified for the exact destination.
  2. An authorized test through alternate hostnames still matches the intended web restriction.
  3. A known test app is identified and its authorized/blocked behavior matches policy.
  4. The intended business app passes while genuine prohibited remote control still blocks.

Explanation

Correct Answer

C:

Encrypted payload classification can require decryption or supporting protocol metadata. The test should show that A known test app is identified and its authorized/blocked behavior matches policy.

Incorrect Answers

A:

Multiple security profiles can evaluate an accepted session; log correlation isolates the effective block. The stated configuration instead needs this result: a known test app is identified and its authorized/blocked behavior matches policy.

B:

Web filtering requires matching the application destination identity appropriately across hostnames. The stated configuration instead needs this result: a known test app is identified and its authorized/blocked behavior matches policy.

D:

Signature false positives should be handled narrowly to retain broader application protections. The stated configuration instead needs this result: a known test app is identified and its authorized/blocked behavior matches policy.

Question 39

During FortiOS 7.6 root-cause analysis, an engineer finds: The production firewall continues to use one shared default administrator credential. Which change repairs the fault?

  1. Disable unnecessary cleartext management protocols and constrain approved services.
  2. Create attributable named accounts and disable or rotate shared default access as policy permits.
  3. Correct NTP/time-zone configuration and re-run a timestamped log test.
  4. Capture the specific packet tuple on the relevant interfaces.

Explanation

Correct Answer

B:

Administrator authentication and audit attribution require unique identities and appropriate access profiles. The remedy is Create attributable named accounts and disable or rotate shared default access as policy permits.

Incorrect Answers

A:

Management-plane protocol selection and interface restrictions reduce exposure independent of traffic inspection. In the reported case, administrator authentication and audit attribution require unique identities and appropriate access profiles.

C:

Reliable incident timeline correlation requires consistent device and collector clocks. In the reported case, administrator authentication and audit attribution require unique identities and appropriate access profiles.

D:

Packet sniffing validates observed path while debug flow explains policy decisions. In the reported case, administrator authentication and audit attribution require unique identities and appropriate access profiles.

Question 40

A FortiGate administrator must satisfy this condition without unrelated redesign: Two overlapping policies match the same client and one has a web profile with different behavior. Which option is most appropriate?

  1. Modify the matching central SNAT rule and verify its precedence and address mapping.
  2. Place the appropriate deny rule before a broader allow and enable logging for denied traffic.
  3. Inspect rule order, actual addresses and ports, then place the intended specific rule before the generic rule.
  4. Configure an LDAP server connector and the relevant directory groups for firewall authentication.

Explanation

Correct Answer

C:

Different security profiles apply based on the single effective matching policy. Confirmation is obtained when traffic logs identify the specific policy and its corresponding profile actions.

Incorrect Answers

A:

Central NAT separates translation rules from firewall policy acceptance. In the reported case, different security profiles apply based on the single effective matching policy.

B:

Effective policy ordering, not labels, governs first applicable forwarding decisions. In the reported case, different security profiles apply based on the single effective matching policy.

D:

LDAP integration needs group mapping in addition to reaching the directory server. In the reported case, different security profiles apply based on the single effective matching policy.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests