McAfee Secure

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 5

Question 40

A FortiGate administrator must satisfy this condition without unrelated redesign: Two overlapping policies match the same client and one has a web profile with different behavior. Which option is most appropriate?

  1. Modify the matching central SNAT rule and verify its precedence and address mapping.
  2. Place the appropriate deny rule before a broader allow and enable logging for denied traffic.
  3. Inspect rule order, actual addresses and ports, then place the intended specific rule before the generic rule.
  4. Configure an LDAP server connector and the relevant directory groups for firewall authentication.

Explanation

Correct Answer

C:

Different security profiles apply based on the single effective matching policy. Confirmation is obtained when traffic logs identify the specific policy and its corresponding profile actions.

Incorrect Answers

A:

Central NAT separates translation rules from firewall policy acceptance. In the reported case, different security profiles apply based on the single effective matching policy.

B:

Effective policy ordering, not labels, governs first applicable forwarding decisions. In the reported case, different security profiles apply based on the single effective matching policy.

D:

LDAP integration needs group mapping in addition to reaching the directory server. In the reported case, different security profiles apply based on the single effective matching policy.

Question 41

The security team must implement a specific FortiGate control: A FortiGate needs DNS resolution for FortiGuard and NTP but an invalid resolver has been configured. What configuration is the best starting point?

  1. Set a suitable remote log target and test administrative and traffic event forwarding.
  2. Check the FortiGate's local-out route, DNS and connectivity diagnostics instead of client policies.
  3. Set reachable system DNS and verify name resolution and routing from the FortiGate local-out context.
  4. Configure the DHCP server on the correct VLAN interface with a subnet-matched lease pool and DNS, explicitly advertising the same-subnet upstream router as the clients' default gateway.

Explanation

Correct Answer

C:

Traffic generated by the firewall itself can use paths and settings distinct from forwarded sessions. Confirmation is obtained when the device resolves approved vendor endpoints and local-out DNS queries follow the intended route.

Incorrect Answers

A:

Log storage options depend on hardware and configured central logging facilities. In the reported case, traffic generated by the firewall itself can use paths and settings distinct from forwarded sessions.

B:

Local-out traffic may not follow the same policy and route context as forwarded clients. In the reported case, traffic generated by the firewall itself can use paths and settings distinct from forwarded sessions.

D:

The FortiGate DHCP scope can advertise an explicit default gateway; the nominated external router must be reachable on the client's link, and allocating an IP alone does not establish forwarding. In the reported case, traffic generated by the firewall itself can use paths and settings distinct from forwarded sessions.

Question 42

The following change is now configured: Correct route tables, security groups and NIC flow steering so protected subnets traverse the appliance. Which test result verifies the intended behavior?

  1. Only the intended policy ID records the test flow and its configured action.
  2. The query returns only relevant denied sessions with timestamp and policy identification.
  3. A test flow hits the FortiGate inspection policy and returns symmetrically.
  4. Cloud flow logs show the intended managed inspection policy on test workloads.

Explanation

Correct Answer

C:

Launching a VM alone does not place it in the workload traffic path. The test should show that A test flow hits the FortiGate inspection policy and returns symmetrically.

Incorrect Answers

A:

Policy order and matching fields determine the effective rule, not the rule name. The stated configuration instead needs this result: a test flow hits the FortiGate inspection policy and returns symmetrically.

B:

Log queries should preserve time and traffic direction context to avoid false incident conclusions. The stated configuration instead needs this result: a test flow hits the FortiGate inspection policy and returns symmetrically.

D:

A managed cloud-native firewall requires explicit cloud policy and routing integration. The stated configuration instead needs this result: a test flow hits the FortiGate inspection policy and returns symmetrically.

Question 43

A controlled FortiOS 7.6 test is planned for this need: The finance subnet must reach the payroll server on HTTPS, while guest devices must not reach it. Which configuration should be implemented?

  1. Create a FortiGate virtual IP for external TCP 443 to the approved internal server and a matching inbound policy.
  2. Create an ordered accept policy restricted to finance source, payroll destination and TCP 443, with other sources denied.
  3. Create an explicit narrow deny or remove an overly broad existing allow, retaining required IoT exceptions.
  4. Inspect FSSO user-IP record updates, polling/agent refresh and stale logoff handling.

Explanation

Correct Answer

B:

FortiGate forward policies evaluate the matching interface/address/service/schedule conditions and effective ordering. Confirmation is obtained when a finance-host HTTPS session matches the named policy; a guest-host test matches a deny.

Incorrect Answers

A:

A VIP performs DNAT; a separate appropriately scoped firewall policy must permit the translated service. In the reported case, FortiGate forward policies evaluate the matching interface/address/service/schedule conditions and effective ordering.

C:

Inter-VLAN traffic traversing the FortiGate is subject to effective ordered policy rules. In the reported case, FortiGate forward policies evaluate the matching interface/address/service/schedule conditions and effective ordering.

D:

FSSO policy correctness depends on timely user-IP lifecycle updates. In the reported case, FortiGate forward policies evaluate the matching interface/address/service/schedule conditions and effective ordering.

Question 44

A FortiGate implementation is reported as complete: Use an appropriate load-balancing SD-WAN rule with two eligible SLA-passing members. Which measured outcome would verify the change?

  1. New bulk sessions distribute across eligible members while the failed member is excluded.
  2. The route table contains a usable default next hop and off-subnet test packets leave correctly.
  3. New sessions choose the cheaper SLA-passing link; excessive loss removes it from eligible selection and traffic moves to an approved healthy member.
  4. The route lookup selects the priority-1 next hop while both routes are eligible.

Explanation

Correct Answer

A:

SD-WAN can load-balance sessions across multiple eligible healthy members when configured. The test should show that New bulk sessions distribute across eligible members while the failed member is excluded.

Incorrect Answers

B:

A default route is useful only when its next hop can be resolved and reached. The stated configuration instead needs this result: new bulk sessions distribute across eligible members while the failed member is excluded.

C:

Lowest-cost SLA selects the lowest-cost member that satisfies the assigned performance SLA; if eligible member costs tie, interface preference order can decide. The stated configuration instead needs this result: new bulk sessions distribute across eligible members while the failed member is excluded.

D:

FortiOS uses priority to break same-distance route ties, with lower numeric priority preferred. The stated configuration instead needs this result: new bulk sessions distribute across eligible members while the failed member is excluded.

Question 45

An auditor must validate the FortiOS configuration: Inspect rule order, actual addresses and ports, then place the intended specific rule before the generic rule. Which result demonstrates the requirement was met?

  1. The collector receives the event and FortiGate displays the current user-IP/group mapping.
  2. Traffic logs identify the specific policy and its corresponding profile actions.
  3. Access to the named SaaS destination works and unrelated Internet services fail.
  4. An outbound flow is observed with the approved wan1 source address and return traffic succeeds.

Explanation

Correct Answer

B:

Different security profiles apply based on the single effective matching policy. The test should show that Traffic logs identify the specific policy and its corresponding profile actions.

Incorrect Answers

A:

FSSO relies on the logon-to-IP mapping arriving from its collector or supported polling source. The stated configuration instead needs this result: traffic logs identify the specific policy and its corresponding profile actions.

C:

Application/destination classification can constrain access beyond simple port 443. The stated configuration instead needs this result: traffic logs identify the specific policy and its corresponding profile actions.

D:

Source NAT changes the initiating source address independently of the route and firewall accept decision. The stated configuration instead needs this result: traffic logs identify the specific policy and its corresponding profile actions.

Question 46

An enterprise FortiOS 7.6 administrator receives this change request: The administrator needs to distinguish a bad LDAP password from a failed policy group lookup. Which action meets the requirement most directly?

  1. Configure the FortiGate RADIUS server settings, shared secret and user group linkage.
  2. Include the correct authenticated identity group and source conditions in the targeted policy.
  3. Inspect authentication debug/log events and the later identity-group and policy match separately.
  4. Attach appropriate security profiles to the matching accept firewall policy and verify UTM logging.

Explanation

Correct Answer

C:

Credential checks, user identity mapping and traffic authorization are separate steps. Confirmation is obtained when the failure stage is identified as credential rejection or missing group mapping.

Incorrect Answers

A:

RADIUS authentication relies on matching shared secrets and compatible server connectivity. In the reported case, credential checks, user identity mapping and traffic authorization are separate steps.

B:

Identity matching can constrain access more precisely than IP source alone. In the reported case, credential checks, user identity mapping and traffic authorization are separate steps.

D:

Traffic acceptance and content inspection are separate controls bound through the policy. In the reported case, credential checks, user identity mapping and traffic authorization are separate steps.

Question 47

A deployment has regressed with this symptom: A production team switches modes blindly and disables an essential proxy-only feature. Select the most specific fix.

  1. Attach direction-appropriate SSL payload inspection and a compatible IPS sensor, then validate its signature event on an approved test flow.
  2. Choose the supported mode based on measured feature and performance requirements.
  3. Use a narrowly scoped rating override or URL rule and retest representative category sites.
  4. Renew or replace the expired server certificate and retain appropriate verification.

Explanation

Correct Answer

B:

Inspection mode influences both memory use and availability of inspection features. The remedy is Choose the supported mode based on measured feature and performance requirements.

Incorrect Answers

A:

Certificate-only TLS inspection cannot expose encrypted HTTP exploit payloads to IPS; a supported decryption method and attached IPS sensor are required for payload-signature inspection. In the reported case, inspection mode influences both memory use and availability of inspection features.

C:

Local overrides can change handling for specified URLs without weakening an entire FortiGuard category. In the reported case, inspection mode influences both memory use and availability of inspection features.

D:

Server certificate validation failures are distinct from local inspection CA trust warnings. In the reported case, inspection mode influences both memory use and availability of inspection features.

Question 48

An auditor must validate the FortiOS configuration: Enable scoped IKE debug/logging for the peer and compare proposals, IDs and authentication. Which result demonstrates the requirement was met?

  1. Both primary and backup WAN tunnels negotiate with their matching peer endpoints and credentials.
  2. A spoke-to-spoke test reaches the peer with correct protected selectors and no unapproved transit.
  3. Debug identifies a specific proposal or peer-authentication mismatch for the attempted SA.
  4. Both peers authenticate and form the expected IKE SA under a controlled test.

Explanation

Correct Answer

C:

IKE logs expose phase-one negotiation and authentication failures separately from payload policy. The test should show that Debug identifies a specific proposal or peer-authentication mismatch for the attempted SA.

Incorrect Answers

A:

Redundant IPsec WAN paths can require separate peer identity and endpoint authorization. The stated configuration instead needs this result: debug identifies a specific proposal or peer-authentication mismatch for the attempted SA.

B:

Hub connectivity alone does not imply automatic spoke-to-spoke reachability. The stated configuration instead needs this result: debug identifies a specific proposal or peer-authentication mismatch for the attempted SA.

D:

IKE authentication is independent of agreeing on cryptographic algorithms. The stated configuration instead needs this result: debug identifies a specific proposal or peer-authentication mismatch for the attempted SA.

Question 49

After the change, the troubleshooting log shows: A single IP-to-user FSSO record incorrectly grants everyone the same access on an RDS host. What is the best corrective action?

  1. Enable VIP-aware matching on the intended source-specific deny policy, order it before the VIP allow, and verify both denied and permitted sources.
  2. Refresh or expire stale FSSO mappings and verify current logon events.
  3. Correct the remote-group match and verify the identity record.
  4. Deploy the supported TS/session-aware identity mapping rather than a simplistic IP-only record.

Explanation

Correct Answer

D:

Shared terminal-server addresses require session-aware identification, not one workstation mapping. The remedy is Deploy the supported TS/session-aware identity mapping rather than a simplistic IP-only record.

Incorrect Answers

A:

FortiGate VIP-related accept policies can take precedence over generic deny rules; match-vip is a deny-policy-specific setting that makes the deny match traffic destined for a VIP. In the reported case, shared terminal-server addresses require session-aware identification, not one workstation mapping.

B:

FSSO policy correctness depends on timely user-IP lifecycle updates. In the reported case, shared terminal-server addresses require session-aware identification, not one workstation mapping.

C:

Authentication success alone does not establish authorization to the correct group-based rule. In the reported case, shared terminal-server addresses require session-aware identification, not one workstation mapping.

Question 50

A controlled FortiOS 7.6 test is planned for this need: A FortiGate appliance experiences high memory use when buffering large downloads in proxy inspection. Which configuration should be implemented?

  1. Review AV inspection mode, file size limits and resource use, selecting supported settings that meet policy.
  2. Correlate antivirus event IDs and release state; seek a targeted exception or signature correction.
  3. Ensure the replacement CA is trusted by endpoints and the active SSL/SSH profile references the correct certificate.
  4. Create a narrow web rating override or URL exception for the approved portal under the established policy.

Explanation

Correct Answer

A:

Proxy buffering and file-size handling influence memory pressure and inspection coverage. Confirmation is obtained when under controlled load the firewall meets memory and required scanning acceptance criteria.

Incorrect Answers

B:

False positives should be isolated by file/signature evidence rather than disabling broad malware coverage. In the reported case, proxy buffering and file-size handling influence memory pressure and inspection coverage.

C:

The configured inspection signer and the client trust anchor must refer to a compatible chain. In the reported case, proxy buffering and file-size handling influence memory pressure and inspection coverage.

D:

Local overrides can change handling for specified URLs without weakening an entire FortiGuard category. In the reported case, proxy buffering and file-size handling influence memory pressure and inspection coverage.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests