McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 11

Question 100

At the Pinecrest regional network integrator, a desk phone is connected through an intermediary adapter that suppresses LLDP-MED frames. Which setting or practice should be reviewed in future?

  1. Monitor LLDP-MED policy advertisements after phone or switch updates
  2. Test discovery paths before introducing inline desk devices
  3. Review private VLAN and promiscuous-port assignments after server moves
  4. Maintain one reviewed VLAN inventory for all sites

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to test discovery paths before introducing inline desk devices.

Incorrect Answers

A:

Monitor LLDP-MED policy advertisements after phone or switch updates is not the primary recurring safeguard for this problem. The team should test discovery paths before introducing inline desk devices. For the Pinecrest regional network integrator, the direct corrective action is to check the complete device path for LLDP-MED delivery and use a supported alternate voice policy where required.

C:

The suggested preventive check is: Review private VLAN and promiscuous-port assignments after server moves. Its technical scope concerns: Putting endpoints in the same ordinary VLAN permits direct Layer 2 communication unless isolation is configured. This question asks how to sustain control over: An intermediary can block discovery advertisements even when Ethernet connectivity works. The more targeted safeguard is: Test discovery paths before introducing inline desk devices.

D:

Maintain one reviewed VLAN inventory for all sites. That safeguard would help prevent recurrence of: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The risk being reviewed here is instead: An intermediary can block discovery advertisements even when Ethernet connectivity works. The matching ongoing control is: Test discovery paths before introducing inline desk devices.

Question 101

At the Dartwood data network services firm, correct DSCP markings at an access port disappear after a downstream trunk policy rewrites them. Which corrective action best meets the requirement?

  1. Enable approved LLDP transmit and receive on required trusted infrastructure interfaces
  2. Use a supported static aggregate only if both connected ends are intentionally configured for that mode
  3. Compare per-port class demand and total available PoE capacity and adjust hardware or allocations
  4. Trace QoS classification and remarking along the FortiSwitch forwarding path

Explanation

Correct Answer

D:

For the Dartwood data network services firm, the appropriate correction is to trace QoS classification and remarking along the FortiSwitch forwarding path. The decisive reason is that a later hop can undo correct ingress classifications and move packets to the wrong class; acceptance evidence is that a capture at the far end shows approved DSCP values preserved.

Incorrect Answers

A:

The option addresses the separate situation where neighbor discovery cannot build topology when needed LLDP frames are not transmitted or accepted. For this case, the more appropriate response is to trace QoS classification and remarking along the FortiSwitch forwarding path. For the Dartwood data network services firm, the direct corrective action is to trace QoS classification and remarking along the FortiSwitch forwarding path.

B:

The offered action is: Use a supported static aggregate only if both connected ends are intentionally configured for that mode. It is associated with this separate technical condition: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The actual incident concerns a different dependency: A later hop can undo correct ingress classifications and move packets to the wrong class. The corresponding change is: Trace QoS classification and remarking along the FortiSwitch forwarding path.

C:

Compare per-port class demand and total available PoE capacity and adjust hardware or allocations can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to trace QoS classification and remarking along the FortiSwitch forwarding path. For the Dartwood data network services firm, the direct corrective action is to trace QoS classification and remarking along the FortiSwitch forwarding path.

Question 102

At the Dartwood data network services firm, correct DSCP markings at an access port disappear after a downstream trunk policy rewrites them. Which underlying issue most directly explains this situation?

  1. Overly broad strict priority classification can prevent lower queues receiving service
  2. Mismatched LACP negotiation can exclude ports from the intended logical trunk
  3. A later hop can undo correct ingress classifications and move packets to the wrong class
  4. A manually created ISL may not carry new managed VLANs when automatic membership is disabled

Explanation

Correct Answer

C:

The strongest explanation is that a later hop can undo correct ingress classifications and move packets to the wrong class. This accounts for the outcome and supports the action to trace QoS classification and remarking along the FortiSwitch forwarding path.

Incorrect Answers

A:

The offered principle is: Overly broad strict priority classification can prevent lower queues receiving service. In the source material it is associated with: Overly broad strict priority classification can prevent lower queues receiving service. This case has a different controlling cause: A later hop can undo correct ingress classifications and move packets to the wrong class. Its keyed mechanism is: A later hop can undo correct ingress classifications and move packets to the wrong class.

B:

Mismatched LACP negotiation can exclude ports from the intended logical trunk. That is not the mechanism that accounts for the stated failure at the Dartwood data network services firm.

D:

Although a manually created ISL may not carry new managed VLANs when automatic membership is disabled, the presented symptoms do not support that as the primary cause; they indicate that a later hop can undo correct ingress classifications and move packets to the wrong class. For the Dartwood data network services firm, the direct corrective action is to trace QoS classification and remarking along the FortiSwitch forwarding path.

Question 103

At the Dartwood data network services firm, correct DSCP markings at an access port disappear after a downstream trunk policy rewrites them. What evidence would justify considering this concern addressed?

  1. Observed voice packets use the assigned class with acceptable loss and delay
  2. One link is active and failover moves management to the standby without looping
  3. Both switches discover each other across the approved Layer 2 bridge
  4. A capture at the far end shows approved DSCP values preserved

Explanation

Correct Answer

D:

This is the relevant acceptance result: a capture at the far end shows approved DSCP values preserved. It demonstrates the outcome of choosing to trace QoS classification and remarking along the FortiSwitch forwarding path.

Incorrect Answers

A:

Observed voice packets use the assigned class with acceptable loss and delay. That result would test a control for this other failure: A saved QoS policy does not prove that the intended packets actually match its queue. The question instead requires evidence for: A later hop can undo correct ingress classifications and move packets to the wrong class. The direct outcome to verify is: A capture at the far end shows approved DSCP values preserved.

B:

The offered observation is: One link is active and failover moves management to the standby without looping. It would support the separate mechanism: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In this case the decisive dependency is: A later hop can undo correct ingress classifications and move packets to the wrong class. The original keyed verification is: A capture at the far end shows approved DSCP values preserved.

C:

Both switches discover each other across the approved Layer 2 bridge. That result would test a control for this other failure: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The question instead requires evidence for: A later hop can undo correct ingress classifications and move packets to the wrong class. The direct outcome to verify is: A capture at the far end shows approved DSCP values preserved.

Question 104

At the Dartwood data network services firm, correct DSCP markings at an access port disappear after a downstream trunk policy rewrites them. How should the organization sustain the improvement?

  1. Revalidate scheduling fairness after traffic mix changes
  2. Trend optical receive power across long links
  3. Audit trusted and untrusted traffic classes after trunk changes
  4. Retest patch leads during closet maintenance

Explanation

Correct Answer

C:

The continuing safeguard is to audit trusted and untrusted traffic classes after trunk changes. It helps avoid the original condition: a later hop can undo correct ingress classifications and move packets to the wrong class.

Incorrect Answers

A:

The suggested preventive check is: Revalidate scheduling fairness after traffic mix changes. Its technical scope concerns: Overly broad strict priority classification can prevent lower queues receiving service. This question asks how to sustain control over: A later hop can undo correct ingress classifications and move packets to the wrong class. The more targeted safeguard is: Audit trusted and untrusted traffic classes after trunk changes.

B:

Trend optical receive power across long links. That safeguard would help prevent recurrence of: Excess attenuation can corrupt frames even when physical link occasionally remains up. The risk being reviewed here is instead: A later hop can undo correct ingress classifications and move packets to the wrong class. The matching ongoing control is: Audit trusted and untrusted traffic classes after trunk changes.

D:

Retest patch leads during closet maintenance. That safeguard would help prevent recurrence of: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The risk being reviewed here is instead: A later hop can undo correct ingress classifications and move packets to the wrong class. The matching ongoing control is: Audit trusted and untrusted traffic classes after trunk changes.

Question 105

At the Silverport switching consultancy, a high-power phone intermittently reboots after an infrastructure change even though the port is up. Which approach best resolves the described issue?

  1. Trace QoS classification and remarking along the FortiSwitch forwarding path
  2. Inspect PoE power allocation and any supported LLDP-MED power negotiation information
  3. Use a supported static aggregate only if both connected ends are intentionally configured for that mode
  4. Apply supported protocol-based VLAN rules only after confirming hardware capability and required frame matches

Explanation

Correct Answer

B:

For the Silverport switching consultancy, the appropriate correction is to inspect PoE power allocation and any supported LLDP-MED power negotiation information. The decisive reason is that link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts; acceptance evidence is that the phone remains powered during its maximum supported draw while policy remains active.

Incorrect Answers

A:

Trace QoS classification and remarking along the FortiSwitch forwarding path can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect PoE power allocation and any supported LLDP-MED power negotiation information. For the Silverport switching consultancy, the direct corrective action is to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

C:

This alternative would be suitable where a peer that does not negotiate LACP cannot form a dynamic aggregated link. It does not by itself resolve the need to inspect PoE power allocation and any supported LLDP-MED power negotiation information. For the Silverport switching consultancy, the direct corrective action is to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

D:

Apply supported protocol-based VLAN rules only after confirming hardware capability and required frame matches addresses a different kind of problem: simple native VLAN handling cannot distinguish service traffic by defined protocol selectors. Here the reported weakness is that link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. For the Silverport switching consultancy, the direct corrective action is to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

Question 106

At the Silverport switching consultancy, a high-power phone intermittently reboots after an infrastructure change even though the port is up. Which explanation best accounts for the concern?

  1. An intermediary can block discovery advertisements even when Ethernet connectivity works
  2. Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts
  3. A MAC classification mismatch can override the VLAN intended for a known endpoint
  4. A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery

Explanation

Correct Answer

B:

The problem stems from the fact that link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. A correct solution would inspect PoE power allocation and any supported LLDP-MED power negotiation information and check that the phone remains powered during its maximum supported draw while policy remains active.

Incorrect Answers

A:

The offered principle is: An intermediary can block discovery advertisements even when Ethernet connectivity works. In the source material it is associated with: An intermediary can block discovery advertisements even when Ethernet connectivity works. This case has a different controlling cause: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. Its keyed mechanism is: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts.

C:

The offered principle is: A MAC classification mismatch can override the VLAN intended for a known endpoint. In the source material it is associated with: A MAC classification mismatch can override the VLAN intended for a known endpoint. This case has a different controlling cause: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. Its keyed mechanism is: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts.

D:

A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. That may occur elsewhere, but the evidence at the Silverport switching consultancy instead points to the fact that link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts.

Question 107

At the Silverport switching consultancy, a high-power phone intermittently reboots after an infrastructure change even though the port is up. Which test result best shows the requirement is met?

  1. A test phone discovers the voice VLAN and obtains its voice network address
  2. The phone remains powered during its maximum supported draw while policy remains active
  3. The downstream serial number appears for authorization with the correct uplink topology
  4. Authorized subnet traffic is seen in the correct FortiGate firewall policy logs

Explanation

Correct Answer

B:

This is the relevant acceptance result: the phone remains powered during its maximum supported draw while policy remains active. It demonstrates the outcome of choosing to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

Incorrect Answers

A:

A test phone discovers the voice VLAN and obtains its voice network address. That result would test a control for this other failure: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The question instead requires evidence for: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. The direct outcome to verify is: The phone remains powered during its maximum supported draw while policy remains active.

C:

The downstream serial number appears for authorization with the correct uplink topology. That result would test a control for this other failure: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. The question instead requires evidence for: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. The direct outcome to verify is: The phone remains powered during its maximum supported draw while policy remains active.

D:

At the Silverport switching consultancy, a result about routing handled by fortigate would not show that the team corrected the failure where link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts.

Question 108

At the Silverport switching consultancy, a high-power phone intermittently reboots after an infrastructure change even though the port is up. Which ongoing control best prevents this issue from recurring?

  1. Audit trusted and untrusted traffic classes after trunk changes
  2. Trend per-port PoE consumption when phone models are upgraded
  3. Verify device and service compatibility before provisioning another tenant
  4. Review trunk allowed VLAN sets when new segments are deployed

Explanation

Correct Answer

B:

The needed prevention is to trend per-port PoE consumption when phone models are upgraded. It directly sustains the original change to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

Incorrect Answers

A:

That routine supports egress dscp preservation, but the relevant ongoing risk requires the team to trend per-port PoE consumption when phone models are upgraded. For the Silverport switching consultancy, the direct corrective action is to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

C:

Verify device and service compatibility before provisioning another tenant is not the primary recurring safeguard for this problem. The team should trend per-port PoE consumption when phone models are upgraded. For the Silverport switching consultancy, the direct corrective action is to inspect PoE power allocation and any supported LLDP-MED power negotiation information.

D:

Review trunk allowed VLAN sets when new segments are deployed. That safeguard would help prevent recurrence of: A physically healthy trunk does not automatically carry every VLAN identifier. The risk being reviewed here is instead: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. The matching ongoing control is: Trend per-port PoE consumption when phone models are upgraded.

Question 109

At the Elmhurst infrastructure service operator, a FortiGate manages the first FortiSwitch but a new downstream member never appears through the intended inter-switch link. Which implementation choice best addresses the situation?

  1. Design a supported two-tier FortiLink topology with correct uplink roles and authorization order
  2. Find the conflicting ARP ownership and retain only the approved gateway identity
  3. Validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk
  4. Use supported loop guard protection or correct the failing link to avoid unsafe forwarding

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk. The observed risk is that a downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path; a passing acceptance check would show that the downstream serial number appears for authorization with the correct uplink topology.

Incorrect Answers

A:

This alternative would be suitable where multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. It does not by itself resolve the need to validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk. For the Elmhurst infrastructure service operator, the direct corrective action is to validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk.

B:

Find the conflicting ARP ownership and retain only the approved gateway identity addresses a different kind of problem: duplicate IP responses cause unstable next-hop MAC resolution. Here the reported weakness is that a downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. For the Elmhurst infrastructure service operator, the direct corrective action is to validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk.

D:

The offered alternative is: Use supported loop guard protection or correct the failing link to avoid unsafe forwarding. It addresses this separate failure mode: A unidirectional control-plane failure can make a redundant path appear safe when it is not. In the current case, the observed mechanism is: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. The keyed action, Validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk., targets that condition more directly.

Question 110

At the Elmhurst infrastructure service operator, a FortiGate manages the first FortiSwitch but a new downstream member never appears through the intended inter-switch link. What risk should the team identify as the primary issue?

  1. HA failover can strand managed switches when the new active FortiGate has no valid management path
  2. A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path
  3. An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff
  4. A route pointing at an unreachable neighbor cannot forward outside connected subnets

Explanation

Correct Answer

B:

This identifies the root issue: a downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. At the Elmhurst infrastructure service operator, the team should therefore validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk.

Incorrect Answers

A:

The offered action is: HA failover can strand managed switches when the new active FortiGate has no valid management path. It is associated with this separate technical condition: HA failover can strand managed switches when the new active FortiGate has no valid management path. The actual incident concerns a different dependency: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. The corresponding change is: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path.

C:

The offered alternative is: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. It addresses this separate failure mode: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. In the current case, the observed mechanism is: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. The keyed action, A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path., targets that condition more directly.

D:

A route pointing at an unreachable neighbor cannot forward outside connected subnets. That is not the mechanism that accounts for the stated failure at the Elmhurst infrastructure service operator.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests