McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 13

Question 120

At the Goldport network modernization program, a FortiGate uses a FortiLink split interface and engineers expect both physical paths to forward simultaneously. Which ongoing control best prevents this issue from recurring?

  1. Review split interface state whenever redundant uplinks change
  2. Review uplink capacity and discovery state after topology expansion
  3. Retest breakout support after transceiver or firmware upgrades
  4. Inspect membership and querier state after video system changes

Explanation

Correct Answer

A:

The continuing safeguard is to review split interface state whenever redundant uplinks change. It helps avoid the original condition: a FortiLink split interface may intentionally keep only one physical path active without MCLAG.

Incorrect Answers

B:

Review uplink capacity and discovery state after topology expansion. That safeguard would help prevent recurrence of: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The risk being reviewed here is instead: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. The matching ongoing control is: Review split interface state whenever redundant uplinks change.

C:

Retest breakout support after transceiver or firmware upgrades is not the primary recurring safeguard for this problem. The team should review split interface state whenever redundant uplinks change. For the Goldport network modernization program, the direct corrective action is to account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding.

D:

Inspect membership and querier state after video system changes. That safeguard would help prevent recurrence of: Without valid membership tracking multicast may be flooded to non-subscribers. The risk being reviewed here is instead: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. The matching ongoing control is: Review split interface state whenever redundant uplinks change.

Question 121

At the Whitford managed-network provider, two FortiSwitch aggregation peers are connected without a configured MCLAG inter-chassis link and downstream bonds fail. Which implementation choice best addresses the situation?

  1. Design a supported two-tier FortiLink topology with correct uplink roles and authorization order
  2. Standardize the supported LLDP-MED network policy and verify both phone models interpret it correctly
  3. Configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks
  4. Enable supported edge-port protection such as BPDU guard where downstream switches are prohibited

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks. The observed risk is that multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity; a passing acceptance check would show that a dual-homed test device retains forwarding after either peer path fails.

Incorrect Answers

A:

This alternative would be suitable where multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. It does not by itself resolve the need to configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks. For the Whitford managed-network provider, the direct corrective action is to configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks.

B:

Standardize the supported LLDP-MED network policy and verify both phone models interpret it correctly addresses a different kind of problem: inconsistent advertised application policies can cause mismatched VLAN or QoS markings. Here the reported weakness is that multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. For the Whitford managed-network provider, the direct corrective action is to configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks.

D:

The offered alternative is: Enable supported edge-port protection such as BPDU guard where downstream switches are prohibited. It addresses this separate failure mode: Unexpected bridge protocol frames on an edge port indicate a possible unauthorized loop. In the current case, the observed mechanism is: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The keyed action, Configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks., targets that condition more directly.

Question 122

At the Whitford managed-network provider, two FortiSwitch aggregation peers are connected without a configured MCLAG inter-chassis link and downstream bonds fail. What risk should the team identify as the primary issue?

  1. Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration
  2. Ordinary LLDP support does not prove an endpoint applies LLDP-MED network policy TLVs
  3. Local bypass routing can defeat the approved security inspection architecture
  4. Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity

Explanation

Correct Answer

D:

The architectural weakness is that multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. It can be addressed through the controlled change to configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks.

Incorrect Answers

A:

The offered action is: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. It is associated with this separate technical condition: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. The actual incident concerns a different dependency: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The corresponding change is: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity.

B:

Ordinary LLDP support does not prove an endpoint applies LLDP-MED network policy TLVs. That may occur elsewhere, but the evidence at the Whitford managed-network provider instead points to the fact that multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity.

C:

The offered alternative is: Local bypass routing can defeat the approved security inspection architecture. It addresses this separate failure mode: Local bypass routing can defeat the approved security inspection architecture. In the current case, the observed mechanism is: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The keyed action, Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity., targets that condition more directly.

Question 123

At the Whitford managed-network provider, two FortiSwitch aggregation peers are connected without a configured MCLAG inter-chassis link and downstream bonds fail. What is the strongest acceptance test for this change?

  1. The aggregate and managed switch link show the expected operational member state
  2. A packet trace shows the controller receives untagged frames for its correct VLAN
  3. A dual-homed test device retains forwarding after either peer path fails
  4. Both test phones use the same approved voice VLAN and negotiated priority

Explanation

Correct Answer

C:

This tests the real business behavior: a dual-homed test device retains forwarding after either peer path fails. It specifically checks whether the risk that multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity has been reduced.

Incorrect Answers

A:

The aggregate and managed switch link show the expected operational member state. That result would test a control for this other failure: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The question instead requires evidence for: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The direct outcome to verify is: A dual-homed test device retains forwarding after either peer path fails.

B:

At the Whitford managed-network provider, a result about untagged vlan egress expectation would not show that the team corrected the failure where multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity.

D:

The offered observation is: Both test phones use the same approved voice VLAN and negotiated priority. It would support the separate mechanism: Inconsistent advertised application policies can cause mismatched VLAN or QoS markings. In this case the decisive dependency is: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The original keyed verification is: A dual-homed test device retains forwarding after either peer path fails.

Question 124

At the Whitford managed-network provider, two FortiSwitch aggregation peers are connected without a configured MCLAG inter-chassis link and downstream bonds fail. Which setting or practice should be reviewed in future?

  1. Review FortiLink point-to-point settings when intermediate transport changes
  2. Monitor STP change events after each rack move
  3. Track MAC movement alerts after large office rearrangements
  4. Monitor MCLAG peer and ICL status during maintenance

Explanation

Correct Answer

D:

For the Whitford managed-network provider, this maintenance action preserves the fix: monitor MCLAG peer and ICL status during maintenance. It should be revisited as the workload evolves.

Incorrect Answers

A:

Review FortiLink point-to-point settings when intermediate transport changes is not the primary recurring safeguard for this problem. The team should monitor MCLAG peer and ICL status during maintenance. For the Whitford managed-network provider, the direct corrective action is to configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks.

B:

Monitor STP change events after each rack move. That safeguard would help prevent recurrence of: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The risk being reviewed here is instead: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The matching ongoing control is: Monitor MCLAG peer and ICL status during maintenance.

C:

The suggested preventive check is: Track MAC movement alerts after large office rearrangements. Its technical scope concerns: Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN. This question asks how to sustain control over: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. The more targeted safeguard is: Monitor MCLAG peer and ICL status during maintenance.

Question 125

At the Harborwick branch IT department, an installer uses a non-discovery port for a managed switch stack and expects automatic authorization. Which corrective action best meets the requirement?

  1. Distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects
  2. Verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role
  3. Enable approved LLDP transmit and receive on required trusted infrastructure interfaces
  4. Configure supported VLAN interfaces and necessary routes on a model with the required routing capability

Explanation

Correct Answer

B:

The primary failure mode is that a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The proposed action directly fixes it by requiring the team to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role; afterward, verify that the newly cabled switch appears under the intended FortiGate controller.

Incorrect Answers

A:

The option addresses the separate situation where fortiGate manages every member separately even when the switches form one Layer 2 managed stack. For this case, the more appropriate response is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role. For the Harborwick branch IT department, the direct corrective action is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role.

C:

Enable approved LLDP transmit and receive on required trusted infrastructure interfaces can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role. For the Harborwick branch IT department, the direct corrective action is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role.

D:

The offered alternative is: Configure supported VLAN interfaces and necessary routes on a model with the required routing capability. It addresses this separate failure mode: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. In the current case, the observed mechanism is: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The keyed action, Verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role., targets that condition more directly.

Question 126

At the Harborwick branch IT department, an installer uses a non-discovery port for a managed switch stack and expects automatic authorization. Which underlying issue most directly explains this situation?

  1. A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology
  2. A daisy chain creates a single path dependency for management and potentially user data
  3. Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN
  4. Excessive unique source addresses may strain hardware learning resources

Explanation

Correct Answer

A:

The evidence indicates that a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The appropriate response is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role and demonstrate that the newly cabled switch appears under the intended FortiGate controller.

Incorrect Answers

B:

A daisy chain creates a single path dependency for management and potentially user data. That is not the mechanism that accounts for the stated failure at the Harborwick branch IT department.

C:

The offered principle is: Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN. In the source material it is associated with: Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN. This case has a different controlling cause: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. Its keyed mechanism is: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology.

D:

Although excessive unique source addresses may strain hardware learning resources, the presented symptoms do not support that as the primary cause; they indicate that a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. For the Harborwick branch IT department, the direct corrective action is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role.

Question 127

At the Harborwick branch IT department, an installer uses a non-discovery port for a managed switch stack and expects automatic authorization. What evidence would justify considering this concern addressed?

  1. The newly cabled switch appears under the intended FortiGate controller
  2. The aggregate and managed switch link show the expected operational member state
  3. The known device enters its approved VLAN and an unknown MAC follows the fallback policy
  4. A test phone discovers the voice VLAN and obtains its voice network address

Explanation

Correct Answer

A:

This tests the real business behavior: the newly cabled switch appears under the intended FortiGate controller. It specifically checks whether the risk that a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology has been reduced.

Incorrect Answers

B:

The offered observation is: The aggregate and managed switch link show the expected operational member state. It would support the separate mechanism: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. In this case the decisive dependency is: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The original keyed verification is: The newly cabled switch appears under the intended FortiGate controller.

C:

The known device enters its approved VLAN and an unknown MAC follows the fallback policy. That result would test a control for this other failure: A MAC classification mismatch can override the VLAN intended for a known endpoint. The question instead requires evidence for: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The direct outcome to verify is: The newly cabled switch appears under the intended FortiGate controller.

D:

The offered observation is: A test phone discovers the voice VLAN and obtains its voice network address. It would support the separate mechanism: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. In this case the decisive dependency is: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The original keyed verification is: The newly cabled switch appears under the intended FortiGate controller.

Question 128

At the Harborwick branch IT department, an installer uses a non-discovery port for a managed switch stack and expects automatic authorization. How should the organization sustain the improvement?

  1. Maintain a port-role diagram for each managed FortiSwitch cluster
  2. Reassess loop-control compatibility after adding switch models
  3. Maintain a supported optics and fiber inventory
  4. Compare uplink profiles with an approved baseline before cabling changes

Explanation

Correct Answer

A:

The team should maintain a port-role diagram for each managed FortiSwitch cluster. That recurring practice targets the same weakness, namely that a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology.

Incorrect Answers

B:

Reassess loop-control compatibility after adding switch models. That safeguard would help prevent recurrence of: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The risk being reviewed here is instead: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The matching ongoing control is: Maintain a port-role diagram for each managed FortiSwitch cluster.

C:

That routine supports sfp wavelength pairing, but the relevant ongoing risk requires the team to maintain a port-role diagram for each managed FortiSwitch cluster. For the Harborwick branch IT department, the direct corrective action is to verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role.

D:

Compare uplink profiles with an approved baseline before cabling changes. That safeguard would help prevent recurrence of: An access-style port assignment can discard tagged traffic expected by upstream switches. The risk being reviewed here is instead: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The matching ongoing control is: Maintain a port-role diagram for each managed FortiSwitch cluster.

Question 129

At the Uptonbridge data network services firm, a custom inter-switch trunk connects managed switches but required VLANs are missing from the link. Which approach best resolves the described issue?

  1. Select approved compatible transceivers and validate optics on both sides of the ISL
  2. Set explicit supported root bridge priorities according to the topology design
  3. Set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly
  4. Set the correct trusted DHCP snooping boundary on the authorized server-facing port

Explanation

Correct Answer

C:

This solution addresses the stated limitation: a manually created ISL may not carry new managed VLANs when automatic membership is disabled. Implementing it means the team should set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly, then verify that a newly provisioned VLAN is carried only where the documented trunk policy allows it.

Incorrect Answers

A:

Select approved compatible transceivers and validate optics on both sides of the ISL can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly. For the Uptonbridge data network services firm, the direct corrective action is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

B:

The offered action is: Set explicit supported root bridge priorities according to the topology design. It is associated with this separate technical condition: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. The actual incident concerns a different dependency: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. The corresponding change is: Set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

D:

Set the correct trusted DHCP snooping boundary on the authorized server-facing port addresses a different kind of problem: dHCP snooping can filter legitimate server responses when the server path is not trusted. Here the reported weakness is that a manually created ISL may not carry new managed VLANs when automatic membership is disabled. For the Uptonbridge data network services firm, the direct corrective action is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

Question 130

At the Uptonbridge data network services firm, a custom inter-switch trunk connects managed switches but required VLANs are missing from the link. Which explanation best accounts for the concern?

  1. Redundant physical links need controlled forwarding to prevent Layer 2 loops
  2. Configured intent may not match the route actually selected for forwarding
  3. A manually created ISL may not carry new managed VLANs when automatic membership is disabled
  4. Port labels may become stale when cables move and must be reconciled with observed neighbors

Explanation

Correct Answer

C:

The situation shows that a manually created ISL may not carry new managed VLANs when automatic membership is disabled, rather than merely a monitoring or presentation issue. Remediation is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

Incorrect Answers

A:

The offered principle is: Redundant physical links need controlled forwarding to prevent Layer 2 loops. In the source material it is associated with: Redundant physical links need controlled forwarding to prevent Layer 2 loops. This case has a different controlling cause: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. Its keyed mechanism is: A manually created ISL may not carry new managed VLANs when automatic membership is disabled.

B:

Although configured intent may not match the route actually selected for forwarding, the presented symptoms do not support that as the primary cause; they indicate that a manually created ISL may not carry new managed VLANs when automatic membership is disabled. For the Uptonbridge data network services firm, the direct corrective action is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

D:

Port labels may become stale when cables move and must be reconciled with observed neighbors. That may occur elsewhere, but the evidence at the Uptonbridge data network services firm instead points to the fact that a manually created ISL may not carry new managed VLANs when automatic membership is disabled.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests