McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 15

Question 140

At the Brookfield infrastructure service operator, a design connects second-tier managed switches via arbitrary edge ports with no planned inter-switch traffic paths. How should the organization sustain the improvement?

  1. Monitor MCLAG peer and ICL status during maintenance
  2. Audit MST instance mapping when VLANs are added
  3. Check port tagging agreements during legacy device replacements
  4. Review uplink capacity and discovery state after topology expansion

Explanation

Correct Answer

D:

The needed prevention is to review uplink capacity and discovery state after topology expansion. It directly sustains the original change to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

Incorrect Answers

A:

The suggested preventive check is: Monitor MCLAG peer and ICL status during maintenance. Its technical scope concerns: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. This question asks how to sustain control over: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The more targeted safeguard is: Review uplink capacity and discovery state after topology expansion.

B:

Audit MST instance mapping when VLANs are added. That safeguard would help prevent recurrence of: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The risk being reviewed here is instead: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The matching ongoing control is: Review uplink capacity and discovery state after topology expansion.

C:

That routine supports untagged vlan egress expectation, but the relevant ongoing risk requires the team to review uplink capacity and discovery state after topology expansion. For the Brookfield infrastructure service operator, the direct corrective action is to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

Question 141

At the Kingsford campus infrastructure group, a FortiGate HA deployment leaves both members using inconsistent FortiLink physical mappings. Which approach best resolves the described issue?

  1. Configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks
  2. Select a matched supported transceiver pair for the fiber medium and distance
  3. Restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths
  4. Align supported FortiLink HA topology and member connectivity with the redundancy design

Explanation

Correct Answer

D:

Align supported FortiLink HA topology and member connectivity with the redundancy design is the best response because hA failover can strand managed switches when the new active FortiGate has no valid management path. A focused validation would establish that the FortiSwitch estate remains authorized and reachable after a controlled HA failover.

Incorrect Answers

A:

Configure the supported MCLAG peer relationship and inter-chassis communication before enabling dual-homed uplinks can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to align supported FortiLink HA topology and member connectivity with the redundancy design. For the Kingsford campus infrastructure group, the direct corrective action is to align supported FortiLink HA topology and member connectivity with the redundancy design.

B:

The offered action is: Select a matched supported transceiver pair for the fiber medium and distance. It is associated with this separate technical condition: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. The actual incident concerns a different dependency: HA failover can strand managed switches when the new active FortiGate has no valid management path. The corresponding change is: Align supported FortiLink HA topology and member connectivity with the redundancy design.

C:

This alternative would be suitable where parallel unmanaged forwarding paths can cause persistent Ethernet loops. It does not by itself resolve the need to align supported FortiLink HA topology and member connectivity with the redundancy design. For the Kingsford campus infrastructure group, the direct corrective action is to align supported FortiLink HA topology and member connectivity with the redundancy design.

Question 142

At the Kingsford campus infrastructure group, a FortiGate HA deployment leaves both members using inconsistent FortiLink physical mappings. Which explanation best accounts for the concern?

  1. A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery
  2. Mismatched LACP negotiation can exclude ports from the intended logical trunk
  3. Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts
  4. HA failover can strand managed switches when the new active FortiGate has no valid management path

Explanation

Correct Answer

D:

This identifies the root issue: hA failover can strand managed switches when the new active FortiGate has no valid management path. At the Kingsford campus infrastructure group, the team should therefore align supported FortiLink HA topology and member connectivity with the redundancy design.

Incorrect Answers

A:

The offered principle is: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. In the source material it is associated with: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. This case has a different controlling cause: HA failover can strand managed switches when the new active FortiGate has no valid management path. Its keyed mechanism is: HA failover can strand managed switches when the new active FortiGate has no valid management path.

B:

Although mismatched LACP negotiation can exclude ports from the intended logical trunk, the presented symptoms do not support that as the primary cause; they indicate that hA failover can strand managed switches when the new active FortiGate has no valid management path. For the Kingsford campus infrastructure group, the direct corrective action is to align supported FortiLink HA topology and member connectivity with the redundancy design.

C:

The offered principle is: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. In the source material it is associated with: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. This case has a different controlling cause: HA failover can strand managed switches when the new active FortiGate has no valid management path. Its keyed mechanism is: HA failover can strand managed switches when the new active FortiGate has no valid management path.

Question 143

At the Kingsford campus infrastructure group, a FortiGate HA deployment leaves both members using inconsistent FortiLink physical mappings. Which test result best shows the requirement is met?

  1. The newly cabled switch appears under the intended FortiGate controller
  2. The phone remains powered during its maximum supported draw while policy remains active
  3. A capture at the far end shows approved DSCP values preserved
  4. The FortiSwitch estate remains authorized and reachable after a controlled HA failover

Explanation

Correct Answer

D:

The team can confirm the fix by showing that the FortiSwitch estate remains authorized and reachable after a controlled HA failover. This aligns with the corrective design to align supported FortiLink HA topology and member connectivity with the redundancy design.

Incorrect Answers

A:

The newly cabled switch appears under the intended FortiGate controller. That result would test a control for this other failure: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The question instead requires evidence for: HA failover can strand managed switches when the new active FortiGate has no valid management path. The direct outcome to verify is: The FortiSwitch estate remains authorized and reachable after a controlled HA failover.

B:

The offered observation is: The phone remains powered during its maximum supported draw while policy remains active. It would support the separate mechanism: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. In this case the decisive dependency is: HA failover can strand managed switches when the new active FortiGate has no valid management path. The original keyed verification is: The FortiSwitch estate remains authorized and reachable after a controlled HA failover.

C:

A capture at the far end shows approved DSCP values preserved. That result would test a control for this other failure: A later hop can undo correct ingress classifications and move packets to the wrong class. The question instead requires evidence for: HA failover can strand managed switches when the new active FortiGate has no valid management path. The direct outcome to verify is: The FortiSwitch estate remains authorized and reachable after a controlled HA failover.

Question 144

At the Kingsford campus infrastructure group, a FortiGate HA deployment leaves both members using inconsistent FortiLink physical mappings. Which ongoing control best prevents this issue from recurring?

  1. Document the control and failure domains of each stack member
  2. Track MAC movement alerts after large office rearrangements
  3. Include switch management reachability in each HA maintenance test
  4. Recheck port speed after transceiver replacements

Explanation

Correct Answer

C:

After implementation, the team should include switch management reachability in each HA maintenance test as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports stack management versus hardware stacking, but the relevant ongoing risk requires the team to include switch management reachability in each HA maintenance test. For the Kingsford campus infrastructure group, the direct corrective action is to align supported FortiLink HA topology and member connectivity with the redundancy design.

B:

Track MAC movement alerts after large office rearrangements. That safeguard would help prevent recurrence of: Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN. The risk being reviewed here is instead: HA failover can strand managed switches when the new active FortiGate has no valid management path. The matching ongoing control is: Include switch management reachability in each HA maintenance test.

D:

Recheck port speed after transceiver replacements. That safeguard would help prevent recurrence of: Incompatible speed configuration can prevent stable physical link negotiation. The risk being reviewed here is instead: HA failover can strand managed switches when the new active FortiGate has no valid management path. The matching ongoing control is: Include switch management reachability in each HA maintenance test.

Question 145

At the Yorkport network security team, an engineer closes a FortiLink switch ring while ignoring the supported control of redundant Layer 2 paths. Which implementation choice best addresses the situation?

  1. Select approved compatible transceivers and validate optics on both sides of the ISL
  2. Create and authorize the required FortiGate VLAN interface and corresponding firewall policy
  3. Validate supported FortiLink topology and loop prevention before activating the ring
  4. Permit the correct tagged voice VLAN and maintain the intended untagged data VLAN for attached computers

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: validate supported FortiLink topology and loop prevention before activating the ring. The observed risk is that redundant physical links need controlled forwarding to prevent Layer 2 loops; a passing acceptance check would show that a ring failure and restoration complete without broadcast storms or authorization loss.

Incorrect Answers

A:

This alternative would be suitable where optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. It does not by itself resolve the need to validate supported FortiLink topology and loop prevention before activating the ring. For the Yorkport network security team, the direct corrective action is to validate supported FortiLink topology and loop prevention before activating the ring.

B:

Create and authorize the required FortiGate VLAN interface and corresponding firewall policy addresses a different kind of problem: layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. Here the reported weakness is that redundant physical links need controlled forwarding to prevent Layer 2 loops. For the Yorkport network security team, the direct corrective action is to validate supported FortiLink topology and loop prevention before activating the ring.

D:

The offered alternative is: Permit the correct tagged voice VLAN and maintain the intended untagged data VLAN for attached computers. It addresses this separate failure mode: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. In the current case, the observed mechanism is: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The keyed action, Validate supported FortiLink topology and loop prevention before activating the ring., targets that condition more directly.

Question 146

At the Yorkport network security team, an engineer closes a FortiLink switch ring while ignoring the supported control of redundant Layer 2 paths. What risk should the team identify as the primary issue?

  1. Redundant physical links need controlled forwarding to prevent Layer 2 loops
  2. A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology
  3. One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths
  4. Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts

Explanation

Correct Answer

A:

The situation shows that redundant physical links need controlled forwarding to prevent Layer 2 loops, rather than merely a monitoring or presentation issue. Remediation is to validate supported FortiLink topology and loop prevention before activating the ring.

Incorrect Answers

B:

A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. That may occur elsewhere, but the evidence at the Yorkport network security team instead points to the fact that redundant physical links need controlled forwarding to prevent Layer 2 loops.

C:

The offered alternative is: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. It addresses this separate failure mode: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. In the current case, the observed mechanism is: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The keyed action, Redundant physical links need controlled forwarding to prevent Layer 2 loops., targets that condition more directly.

D:

Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. That is not the mechanism that accounts for the stated failure at the Yorkport network security team.

Question 147

At the Yorkport network security team, an engineer closes a FortiLink switch ring while ignoring the supported control of redundant Layer 2 paths. What is the strongest acceptance test for this change?

  1. A ring failure and restoration complete without broadcast storms or authorization loss
  2. A newly provisioned VLAN is carried only where the documented trunk policy allows it
  3. Observed LLDP chassis and port identifiers match the verified cable map
  4. The endpoint MAC appears on the new port and frames arrive at the new location

Explanation

Correct Answer

A:

Because redundant physical links need controlled forwarding to prevent Layer 2 loops, the required evidence must show that a ring failure and restoration complete without broadcast storms or authorization loss. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Yorkport network security team, a result about static isl auto vlan limitation would not show that the team corrected the failure where redundant physical links need controlled forwarding to prevent Layer 2 loops.

C:

Observed LLDP chassis and port identifiers match the verified cable map. That result would test a control for this other failure: Port labels may become stale when cables move and must be reconciled with observed neighbors. The question instead requires evidence for: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The direct outcome to verify is: A ring failure and restoration complete without broadcast storms or authorization loss.

D:

The offered observation is: The endpoint MAC appears on the new port and frames arrive at the new location. It would support the separate mechanism: Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN. In this case the decisive dependency is: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The original keyed verification is: A ring failure and restoration complete without broadcast storms or authorization loss.

Question 148

At the Yorkport network security team, an engineer closes a FortiLink switch ring while ignoring the supported control of redundant Layer 2 paths. Which setting or practice should be reviewed in future?

  1. Audit ISL auto VLAN settings with new tenant VLANs
  2. Trend port health and hardware errors before the next outage
  3. Reassess loop-control compatibility after adding switch models
  4. Monitor repeated violations rather than clearing the state blindly

Explanation

Correct Answer

C:

The team should reassess loop-control compatibility after adding switch models. That recurring practice targets the same weakness, namely that redundant physical links need controlled forwarding to prevent Layer 2 loops.

Incorrect Answers

A:

Audit ISL auto VLAN settings with new tenant VLANs is not the primary recurring safeguard for this problem. The team should reassess loop-control compatibility after adding switch models. For the Yorkport network security team, the direct corrective action is to validate supported FortiLink topology and loop prevention before activating the ring.

B:

Trend port health and hardware errors before the next outage. That safeguard would help prevent recurrence of: Physical port faults cannot be distinguished from configuration causes by restart alone. The risk being reviewed here is instead: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The matching ongoing control is: Reassess loop-control compatibility after adding switch models.

D:

Monitor repeated violations rather than clearing the state blindly. That safeguard would help prevent recurrence of: A switch safety action can disable forwarding independently of physical link health. The risk being reviewed here is instead: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The matching ongoing control is: Reassess loop-control compatibility after adding switch models.

Question 149

At the Nortonwood managed-network provider, a procurement team assumes FortiLink-managed multiple switches behave as one chassis with one shared hardware configuration. Which corrective action best meets the requirement?

  1. Distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects
  2. Build a supported FortiLink ring or redundant topology and test failover behavior
  3. Configure supported multicast routing in the appropriate Layer 3 design in addition to receiver membership controls
  4. Map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects. The observed risk is that fortiGate manages every member separately even when the switches form one Layer 2 managed stack; a passing acceptance check would show that an operator can identify and configure each managed switch separately in the topology.

Incorrect Answers

B:

The offered action is: Build a supported FortiLink ring or redundant topology and test failover behavior. It is associated with this separate technical condition: A daisy chain creates a single path dependency for management and potentially user data. The actual incident concerns a different dependency: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The corresponding change is: Distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects.

C:

Configure supported multicast routing in the appropriate Layer 3 design in addition to receiver membership controls can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects. For the Nortonwood managed-network provider, the direct corrective action is to distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects.

D:

The offered alternative is: Map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues. It addresses this separate failure mode: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. In the current case, the observed mechanism is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The keyed action, Distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects., targets that condition more directly.

Question 150

At the Nortonwood managed-network provider, a procurement team assumes FortiLink-managed multiple switches behave as one chassis with one shared hardware configuration. Which underlying issue most directly explains this situation?

  1. FortiGate manages every member separately even when the switches form one Layer 2 managed stack
  2. A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path
  3. Excess broadcasts can consume shared switching bandwidth and CPU resources
  4. Different MSTP region parameters change how peers interpret instances and topology

Explanation

Correct Answer

A:

The evidence indicates that fortiGate manages every member separately even when the switches form one Layer 2 managed stack. The appropriate response is to distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects and demonstrate that an operator can identify and configure each managed switch separately in the topology.

Incorrect Answers

B:

A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. That is not the mechanism that accounts for the stated failure at the Nortonwood managed-network provider.

C:

The offered principle is: Excess broadcasts can consume shared switching bandwidth and CPU resources. In the source material it is associated with: Excess broadcasts can consume shared switching bandwidth and CPU resources. This case has a different controlling cause: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. Its keyed mechanism is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack.

D:

Although different MSTP region parameters change how peers interpret instances and topology, the presented symptoms do not support that as the primary cause; they indicate that fortiGate manages every member separately even when the switches form one Layer 2 managed stack. For the Nortonwood managed-network provider, the direct corrective action is to distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests