McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 14

Question 130

At the Uptonbridge data network services firm, a custom inter-switch trunk connects managed switches but required VLANs are missing from the link. Which explanation best accounts for the concern?

  1. Redundant physical links need controlled forwarding to prevent Layer 2 loops
  2. Configured intent may not match the route actually selected for forwarding
  3. A manually created ISL may not carry new managed VLANs when automatic membership is disabled
  4. Port labels may become stale when cables move and must be reconciled with observed neighbors

Explanation

Correct Answer

C:

The situation shows that a manually created ISL may not carry new managed VLANs when automatic membership is disabled, rather than merely a monitoring or presentation issue. Remediation is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

Incorrect Answers

A:

The offered principle is: Redundant physical links need controlled forwarding to prevent Layer 2 loops. In the source material it is associated with: Redundant physical links need controlled forwarding to prevent Layer 2 loops. This case has a different controlling cause: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. Its keyed mechanism is: A manually created ISL may not carry new managed VLANs when automatic membership is disabled.

B:

Although configured intent may not match the route actually selected for forwarding, the presented symptoms do not support that as the primary cause; they indicate that a manually created ISL may not carry new managed VLANs when automatic membership is disabled. For the Uptonbridge data network services firm, the direct corrective action is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

D:

Port labels may become stale when cables move and must be reconciled with observed neighbors. That may occur elsewhere, but the evidence at the Uptonbridge data network services firm instead points to the fact that a manually created ISL may not carry new managed VLANs when automatic membership is disabled.

Question 131

At the Uptonbridge data network services firm, a custom inter-switch trunk connects managed switches but required VLANs are missing from the link. Which test result best shows the requirement is met?

  1. A ring failure and restoration complete without broadcast storms or authorization loss
  2. A newly provisioned VLAN is carried only where the documented trunk policy allows it
  3. The link operates at the agreed speed and error counters remain stable
  4. Tagged test traffic enters the intended egress queue under load

Explanation

Correct Answer

B:

This is the relevant acceptance result: a newly provisioned VLAN is carried only where the documented trunk policy allows it. It demonstrates the outcome of choosing to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

Incorrect Answers

A:

A ring failure and restoration complete without broadcast storms or authorization loss. That result would test a control for this other failure: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The question instead requires evidence for: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. The direct outcome to verify is: A newly provisioned VLAN is carried only where the documented trunk policy allows it.

C:

The link operates at the agreed speed and error counters remain stable. That result would test a control for this other failure: Incompatible speed configuration can prevent stable physical link negotiation. The question instead requires evidence for: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. The direct outcome to verify is: A newly provisioned VLAN is carried only where the documented trunk policy allows it.

D:

At the Uptonbridge data network services firm, a result about 802.1p priority interpretation would not show that the team corrected the failure where a manually created ISL may not carry new managed VLANs when automatic membership is disabled.

Question 132

At the Uptonbridge data network services firm, a custom inter-switch trunk connects managed switches but required VLANs are missing from the link. Which ongoing control best prevents this issue from recurring?

  1. Document the control and failure domains of each stack member
  2. Retest patch leads during closet maintenance
  3. Audit ISL auto VLAN settings with new tenant VLANs
  4. Maintain one reviewed VLAN inventory for all sites

Explanation

Correct Answer

C:

After implementation, the team should audit ISL auto VLAN settings with new tenant VLANs as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports stack management versus hardware stacking, but the relevant ongoing risk requires the team to audit ISL auto VLAN settings with new tenant VLANs. For the Uptonbridge data network services firm, the direct corrective action is to set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly.

B:

Retest patch leads during closet maintenance. That safeguard would help prevent recurrence of: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The risk being reviewed here is instead: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. The matching ongoing control is: Audit ISL auto VLAN settings with new tenant VLANs.

D:

Maintain one reviewed VLAN inventory for all sites. That safeguard would help prevent recurrence of: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The risk being reviewed here is instead: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. The matching ongoing control is: Audit ISL auto VLAN settings with new tenant VLANs.

Question 133

At the Juniperford switching consultancy, a FortiGate aggregate intended for a managed switch topology does not establish expected member operation. Which implementation choice best addresses the situation?

  1. Use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology
  2. Verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role
  3. Set explicit supported root bridge priorities according to the topology design
  4. Add the approved VLAN to the permitted VLAN set on each required trunk hop

Explanation

Correct Answer

A:

This solution addresses the stated limitation: fortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. Implementing it means the team should use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology, then verify that the aggregate and managed switch link show the expected operational member state.

Incorrect Answers

B:

Verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role addresses a different kind of problem: a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. Here the reported weakness is that fortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. For the Juniperford switching consultancy, the direct corrective action is to use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology.

C:

The option addresses the separate situation where unexpected root election creates suboptimal forwarding paths and fragile redundancy. For this case, the more appropriate response is to use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology. For the Juniperford switching consultancy, the direct corrective action is to use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology.

D:

The offered alternative is: Add the approved VLAN to the permitted VLAN set on each required trunk hop. It addresses this separate failure mode: A physically healthy trunk does not automatically carry every VLAN identifier. In the current case, the observed mechanism is: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The keyed action, Use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology., targets that condition more directly.

Question 134

At the Juniperford switching consultancy, a FortiGate aggregate intended for a managed switch topology does not establish expected member operation. What risk should the team identify as the primary issue?

  1. FortiGate manages every member separately even when the switches form one Layer 2 managed stack
  2. Unrestricted low-priority demand can fill shared switch buffers during contention
  3. FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply
  4. Different MSTP region parameters change how peers interpret instances and topology

Explanation

Correct Answer

C:

The evidence indicates that fortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The appropriate response is to use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology and demonstrate that the aggregate and managed switch link show the expected operational member state.

Incorrect Answers

A:

The offered action is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. It is associated with this separate technical condition: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The actual incident concerns a different dependency: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The corresponding change is: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply.

B:

Unrestricted low-priority demand can fill shared switch buffers during contention. That may occur elsewhere, but the evidence at the Juniperford switching consultancy instead points to the fact that fortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply.

D:

Different MSTP region parameters change how peers interpret instances and topology. That is not the mechanism that accounts for the stated failure at the Juniperford switching consultancy.

Question 135

At the Juniperford switching consultancy, a FortiGate aggregate intended for a managed switch topology does not establish expected member operation. What is the strongest acceptance test for this change?

  1. Every second-tier switch receives its configuration and routes data on the intended uplink
  2. A mixed-load test preserves protected video quality and acceptable best-effort throughput
  3. The aggregate and managed switch link show the expected operational member state
  4. The port returns to service only for an authorized compliant endpoint

Explanation

Correct Answer

C:

This tests the real business behavior: the aggregate and managed switch link show the expected operational member state. It specifically checks whether the risk that fortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply has been reduced.

Incorrect Answers

A:

Every second-tier switch receives its configuration and routes data on the intended uplink. That result would test a control for this other failure: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The question instead requires evidence for: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The direct outcome to verify is: The aggregate and managed switch link show the expected operational member state.

B:

At the Juniperford switching consultancy, a result about qos priority starvation would not show that the team corrected the failure where fortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply.

D:

The offered observation is: The port returns to service only for an authorized compliant endpoint. It would support the separate mechanism: A switch safety action can disable forwarding independently of physical link health. In this case the decisive dependency is: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The original keyed verification is: The aggregate and managed switch link show the expected operational member state.

Question 136

At the Juniperford switching consultancy, a FortiGate aggregate intended for a managed switch topology does not establish expected member operation. Which setting or practice should be reviewed in future?

  1. Audit ISL auto VLAN settings with new tenant VLANs
  2. Audit native VLAN mappings whenever endpoint ports are moved
  3. Verify device and service compatibility before provisioning another tenant
  4. Recheck FortiLink aggregate support against FortiOS upgrades

Explanation

Correct Answer

D:

For the Juniperford switching consultancy, this maintenance action preserves the fix: recheck FortiLink aggregate support against FortiOS upgrades. It should be revisited as the workload evolves.

Incorrect Answers

A:

Audit ISL auto VLAN settings with new tenant VLANs is not the primary recurring safeguard for this problem. The team should recheck FortiLink aggregate support against FortiOS upgrades. For the Juniperford switching consultancy, the direct corrective action is to use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology.

B:

Audit native VLAN mappings whenever endpoint ports are moved. That safeguard would help prevent recurrence of: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. The risk being reviewed here is instead: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The matching ongoing control is: Recheck FortiLink aggregate support against FortiOS upgrades.

C:

The suggested preventive check is: Verify device and service compatibility before provisioning another tenant. Its technical scope concerns: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. This question asks how to sustain control over: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The more targeted safeguard is: Recheck FortiLink aggregate support against FortiOS upgrades.

Question 137

At the Brookfield infrastructure service operator, a design connects second-tier managed switches via arbitrary edge ports with no planned inter-switch traffic paths. Which corrective action best meets the requirement?

  1. Design a supported two-tier FortiLink topology with correct uplink roles and authorization order
  2. Use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology
  3. Reconcile the VLAN identification plan and consistent tagging through each inter-switch hop
  4. Inspect learned MAC location and correct the port VLAN or aging condition rather than changing IP routes blindly

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: design a supported two-tier FortiLink topology with correct uplink roles and authorization order. The observed risk is that multi-tier switch management requires deliberate forwarding and discovery relationships between tiers; a passing acceptance check would show that every second-tier switch receives its configuration and routes data on the intended uplink.

Incorrect Answers

B:

The offered action is: Use the Fortinet supported aggregate and LACP setting for the chosen FortiLink topology. It is associated with this separate technical condition: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The actual incident concerns a different dependency: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The corresponding change is: Design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

C:

Reconcile the VLAN identification plan and consistent tagging through each inter-switch hop can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to design a supported two-tier FortiLink topology with correct uplink roles and authorization order. For the Brookfield infrastructure service operator, the direct corrective action is to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

D:

The offered alternative is: Inspect learned MAC location and correct the port VLAN or aging condition rather than changing IP routes blindly. It addresses this separate failure mode: Layer 2 forwarding depends on current MAC-to-port learning within the correct VLAN. In the current case, the observed mechanism is: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The keyed action, Design a supported two-tier FortiLink topology with correct uplink roles and authorization order., targets that condition more directly.

Question 138

At the Brookfield infrastructure service operator, a design connects second-tier managed switches via arbitrary edge ports with no planned inter-switch traffic paths. Which underlying issue most directly explains this situation?

  1. A FortiLink split interface may intentionally keep only one physical path active without MCLAG
  2. Inconsistent advertised application policies can cause mismatched VLAN or QoS markings
  3. Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers
  4. A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions

Explanation

Correct Answer

C:

The strongest explanation is that multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. This accounts for the outcome and supports the action to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

Incorrect Answers

A:

The offered principle is: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In the source material it is associated with: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. This case has a different controlling cause: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. Its keyed mechanism is: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers.

B:

Inconsistent advertised application policies can cause mismatched VLAN or QoS markings. That is not the mechanism that accounts for the stated failure at the Brookfield infrastructure service operator.

D:

Although a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions, the presented symptoms do not support that as the primary cause; they indicate that multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. For the Brookfield infrastructure service operator, the direct corrective action is to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

Question 139

At the Brookfield infrastructure service operator, a design connects second-tier managed switches via arbitrary edge ports with no planned inter-switch traffic paths. What evidence would justify considering this concern addressed?

  1. Every second-tier switch receives its configuration and routes data on the intended uplink
  2. The newly cabled switch appears under the intended FortiGate controller
  3. Observed learned-address counts remain within supported limits and flooding falls
  4. A traceroute follows the intended next hop and reaches the remote destination

Explanation

Correct Answer

A:

This tests the real business behavior: every second-tier switch receives its configuration and routes data on the intended uplink. It specifically checks whether the risk that multi-tier switch management requires deliberate forwarding and discovery relationships between tiers has been reduced.

Incorrect Answers

B:

The offered observation is: The newly cabled switch appears under the intended FortiGate controller. It would support the separate mechanism: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. In this case the decisive dependency is: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The original keyed verification is: Every second-tier switch receives its configuration and routes data on the intended uplink.

C:

Observed learned-address counts remain within supported limits and flooding falls. That result would test a control for this other failure: Excessive unique source addresses may strain hardware learning resources. The question instead requires evidence for: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The direct outcome to verify is: Every second-tier switch receives its configuration and routes data on the intended uplink.

D:

The offered observation is: A traceroute follows the intended next hop and reaches the remote destination. It would support the separate mechanism: A route pointing at an unreachable neighbor cannot forward outside connected subnets. In this case the decisive dependency is: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The original keyed verification is: Every second-tier switch receives its configuration and routes data on the intended uplink.

Question 140

At the Brookfield infrastructure service operator, a design connects second-tier managed switches via arbitrary edge ports with no planned inter-switch traffic paths. How should the organization sustain the improvement?

  1. Monitor MCLAG peer and ICL status during maintenance
  2. Audit MST instance mapping when VLANs are added
  3. Check port tagging agreements during legacy device replacements
  4. Review uplink capacity and discovery state after topology expansion

Explanation

Correct Answer

D:

The needed prevention is to review uplink capacity and discovery state after topology expansion. It directly sustains the original change to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

Incorrect Answers

A:

The suggested preventive check is: Monitor MCLAG peer and ICL status during maintenance. Its technical scope concerns: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. This question asks how to sustain control over: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The more targeted safeguard is: Review uplink capacity and discovery state after topology expansion.

B:

Audit MST instance mapping when VLANs are added. That safeguard would help prevent recurrence of: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The risk being reviewed here is instead: Multi-tier switch management requires deliberate forwarding and discovery relationships between tiers. The matching ongoing control is: Review uplink capacity and discovery state after topology expansion.

C:

That routine supports untagged vlan egress expectation, but the relevant ongoing risk requires the team to review uplink capacity and discovery state after topology expansion. For the Brookfield infrastructure service operator, the direct corrective action is to design a supported two-tier FortiLink topology with correct uplink roles and authorization order.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests