McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 16

Question 150

At the Nortonwood managed-network provider, a procurement team assumes FortiLink-managed multiple switches behave as one chassis with one shared hardware configuration. Which underlying issue most directly explains this situation?

  1. FortiGate manages every member separately even when the switches form one Layer 2 managed stack
  2. A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path
  3. Excess broadcasts can consume shared switching bandwidth and CPU resources
  4. Different MSTP region parameters change how peers interpret instances and topology

Explanation

Correct Answer

A:

The evidence indicates that fortiGate manages every member separately even when the switches form one Layer 2 managed stack. The appropriate response is to distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects and demonstrate that an operator can identify and configure each managed switch separately in the topology.

Incorrect Answers

B:

A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. That is not the mechanism that accounts for the stated failure at the Nortonwood managed-network provider.

C:

The offered principle is: Excess broadcasts can consume shared switching bandwidth and CPU resources. In the source material it is associated with: Excess broadcasts can consume shared switching bandwidth and CPU resources. This case has a different controlling cause: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. Its keyed mechanism is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack.

D:

Although different MSTP region parameters change how peers interpret instances and topology, the presented symptoms do not support that as the primary cause; they indicate that fortiGate manages every member separately even when the switches form one Layer 2 managed stack. For the Nortonwood managed-network provider, the direct corrective action is to distinguish FortiLink-managed Layer 2 stack supervision from the individual FortiSwitch devices and their controller objects.

Question 151

At the Nortonwood managed-network provider, a procurement team assumes FortiLink-managed multiple switches behave as one chassis with one shared hardware configuration. What evidence would justify considering this concern addressed?

  1. A newly provisioned VLAN is carried only where the documented trunk policy allows it
  2. Both endpoints show acceptable receive power and stable forwarding
  3. An operator can identify and configure each managed switch separately in the topology
  4. All approved breakout child interfaces come up at their target speeds

Explanation

Correct Answer

C:

At the Nortonwood managed-network provider, evidence that an operator can identify and configure each managed switch separately in the topology directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

A newly provisioned VLAN is carried only where the documented trunk policy allows it. That result would test a control for this other failure: A manually created ISL may not carry new managed VLANs when automatic membership is disabled. The question instead requires evidence for: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The direct outcome to verify is: An operator can identify and configure each managed switch separately in the topology.

B:

The offered observation is: Both endpoints show acceptable receive power and stable forwarding. It would support the separate mechanism: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. In this case the decisive dependency is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The original keyed verification is: An operator can identify and configure each managed switch separately in the topology.

D:

The offered observation is: All approved breakout child interfaces come up at their target speeds. It would support the separate mechanism: Not every physical port supports subdivision into the requested lanes and speeds. In this case the decisive dependency is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The original keyed verification is: An operator can identify and configure each managed switch separately in the topology.

Question 152

At the Nortonwood managed-network provider, a procurement team assumes FortiLink-managed multiple switches behave as one chassis with one shared hardware configuration. How should the organization sustain the improvement?

  1. Maintain a port-role diagram for each managed FortiSwitch cluster
  2. Audit MST instance mapping when VLANs are added
  3. Document the control and failure domains of each stack member
  4. Check LLDP operational status during interface template reviews

Explanation

Correct Answer

C:

The continuing safeguard is to document the control and failure domains of each stack member. It helps avoid the original condition: fortiGate manages every member separately even when the switches form one Layer 2 managed stack.

Incorrect Answers

A:

The suggested preventive check is: Maintain a port-role diagram for each managed FortiSwitch cluster. Its technical scope concerns: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. This question asks how to sustain control over: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The more targeted safeguard is: Document the control and failure domains of each stack member.

B:

Audit MST instance mapping when VLANs are added. That safeguard would help prevent recurrence of: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The risk being reviewed here is instead: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The matching ongoing control is: Document the control and failure domains of each stack member.

D:

Check LLDP operational status during interface template reviews. That safeguard would help prevent recurrence of: Neighbor discovery cannot build topology when needed LLDP frames are not transmitted or accepted. The risk being reviewed here is instead: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The matching ongoing control is: Document the control and failure domains of each stack member.

Question 153

At the Northport branch IT department, a FortiSwitch inter-switch uplink flaps after using unsupported optics at one end of the managed ring. Which approach best resolves the described issue?

  1. Align supported FortiLink HA topology and member connectivity with the redundancy design
  2. Select approved compatible transceivers and validate optics on both sides of the ISL
  3. Align the supported port untagged VLAN handling with the connected device capability
  4. Inspect PoE power allocation and any supported LLDP-MED power negotiation information

Explanation

Correct Answer

B:

For the Northport branch IT department, the appropriate correction is to select approved compatible transceivers and validate optics on both sides of the ISL. The decisive reason is that optical incompatibility can break discovery and data connectivity regardless of VLAN configuration; acceptance evidence is that the ISL stays stable with valid optical diagnostics and every member remains managed.

Incorrect Answers

A:

Align supported FortiLink HA topology and member connectivity with the redundancy design can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to select approved compatible transceivers and validate optics on both sides of the ISL. For the Northport branch IT department, the direct corrective action is to select approved compatible transceivers and validate optics on both sides of the ISL.

C:

This alternative would be suitable where a frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. It does not by itself resolve the need to select approved compatible transceivers and validate optics on both sides of the ISL. For the Northport branch IT department, the direct corrective action is to select approved compatible transceivers and validate optics on both sides of the ISL.

D:

Inspect PoE power allocation and any supported LLDP-MED power negotiation information addresses a different kind of problem: link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. Here the reported weakness is that optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. For the Northport branch IT department, the direct corrective action is to select approved compatible transceivers and validate optics on both sides of the ISL.

Question 154

At the Northport branch IT department, a FortiSwitch inter-switch uplink flaps after using unsupported optics at one end of the managed ring. Which explanation best accounts for the concern?

  1. A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology
  2. Without valid membership tracking multicast may be flooded to non-subscribers
  3. Default power allocation order may not protect the most important devices during shortage
  4. Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration

Explanation

Correct Answer

D:

This identifies the root issue: optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. At the Northport branch IT department, the team should therefore select approved compatible transceivers and validate optics on both sides of the ISL.

Incorrect Answers

A:

The offered principle is: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. In the source material it is associated with: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. This case has a different controlling cause: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. Its keyed mechanism is: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration.

B:

Although without valid membership tracking multicast may be flooded to non-subscribers, the presented symptoms do not support that as the primary cause; they indicate that optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. For the Northport branch IT department, the direct corrective action is to select approved compatible transceivers and validate optics on both sides of the ISL.

C:

The offered principle is: Default power allocation order may not protect the most important devices during shortage. In the source material it is associated with: Default power allocation order may not protect the most important devices during shortage. This case has a different controlling cause: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. Its keyed mechanism is: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration.

Question 155

At the Northport branch IT department, a FortiSwitch inter-switch uplink flaps after using unsupported optics at one end of the managed ring. Which test result best shows the requirement is met?

  1. A ring failure and restoration complete without broadcast storms or authorization loss
  2. The ISL stays stable with valid optical diagnostics and every member remains managed
  3. The phone remains powered during its maximum supported draw while policy remains active
  4. An approved cross-subnet test succeeds while an unapproved flow remains blocked

Explanation

Correct Answer

B:

This is the relevant acceptance result: the ISL stays stable with valid optical diagnostics and every member remains managed. It demonstrates the outcome of choosing to select approved compatible transceivers and validate optics on both sides of the ISL.

Incorrect Answers

A:

A ring failure and restoration complete without broadcast storms or authorization loss. That result would test a control for this other failure: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The question instead requires evidence for: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. The direct outcome to verify is: The ISL stays stable with valid optical diagnostics and every member remains managed.

C:

The phone remains powered during its maximum supported draw while policy remains active. That result would test a control for this other failure: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. The question instead requires evidence for: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. The direct outcome to verify is: The ISL stays stable with valid optical diagnostics and every member remains managed.

D:

At the Northport branch IT department, a result about standalone inter vlan routing would not show that the team corrected the failure where optical incompatibility can break discovery and data connectivity regardless of VLAN configuration.

Question 156

At the Northport branch IT department, a FortiSwitch inter-switch uplink flaps after using unsupported optics at one end of the managed ring. Which ongoing control best prevents this issue from recurring?

  1. Audit ISL auto VLAN settings with new tenant VLANs
  2. Check ISL optics firmware support before network extensions
  3. Compare uplink profiles with an approved baseline before cabling changes
  4. Compare MSTP region digests when adding a new switch

Explanation

Correct Answer

B:

The needed prevention is to check ISL optics firmware support before network extensions. It directly sustains the original change to select approved compatible transceivers and validate optics on both sides of the ISL.

Incorrect Answers

A:

That routine supports static isl auto vlan limitation, but the relevant ongoing risk requires the team to check ISL optics firmware support before network extensions. For the Northport branch IT department, the direct corrective action is to select approved compatible transceivers and validate optics on both sides of the ISL.

C:

Compare uplink profiles with an approved baseline before cabling changes is not the primary recurring safeguard for this problem. The team should check ISL optics firmware support before network extensions. For the Northport branch IT department, the direct corrective action is to select approved compatible transceivers and validate optics on both sides of the ISL.

D:

Compare MSTP region digests when adding a new switch. That safeguard would help prevent recurrence of: Different MSTP region parameters change how peers interpret instances and topology. The risk being reviewed here is instead: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. The matching ongoing control is: Check ISL optics firmware support before network extensions.

Question 157

At the Maplehaven data network services firm, two managed FortiSwitch units must communicate across a transparent bridge that does not pass ordinary LLDP frames. Which implementation choice best addresses the situation?

  1. Set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly
  2. Check FortiLink-supported STP settings and controller management expectations before overriding local ports
  3. Inspect PoE power allocation and any supported LLDP-MED power negotiation information
  4. Use supported FortiLink point-to-point bridging settings on each relevant inter-switch port

Explanation

Correct Answer

D:

The primary failure mode is that a transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The proposed action directly fixes it by requiring the team to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port; afterward, verify that both switches discover each other across the approved Layer 2 bridge.

Incorrect Answers

A:

This alternative would be suitable where a manually created ISL may not carry new managed VLANs when automatic membership is disabled. It does not by itself resolve the need to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port. For the Maplehaven data network services firm, the direct corrective action is to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port.

B:

Check FortiLink-supported STP settings and controller management expectations before overriding local ports addresses a different kind of problem: a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. Here the reported weakness is that a transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. For the Maplehaven data network services firm, the direct corrective action is to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port.

C:

The option addresses the separate situation where link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. For this case, the more appropriate response is to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port. For the Maplehaven data network services firm, the direct corrective action is to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port.

Question 158

At the Maplehaven data network services firm, two managed FortiSwitch units must communicate across a transparent bridge that does not pass ordinary LLDP frames. What risk should the team identify as the primary issue?

  1. FortiGate manages every member separately even when the switches form one Layer 2 managed stack
  2. Excess broadcasts can consume shared switching bandwidth and CPU resources
  3. A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery
  4. Separate VLAN broadcast domains do not communicate without an approved Layer 3 path

Explanation

Correct Answer

C:

The evidence indicates that a transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The appropriate response is to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port and demonstrate that both switches discover each other across the approved Layer 2 bridge.

Incorrect Answers

A:

The offered action is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. It is associated with this separate technical condition: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. The actual incident concerns a different dependency: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The corresponding change is: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery.

B:

Excess broadcasts can consume shared switching bandwidth and CPU resources. That may occur elsewhere, but the evidence at the Maplehaven data network services firm instead points to the fact that a transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery.

D:

Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. That is not the mechanism that accounts for the stated failure at the Maplehaven data network services firm.

Question 159

At the Maplehaven data network services firm, two managed FortiSwitch units must communicate across a transparent bridge that does not pass ordinary LLDP frames. What is the strongest acceptance test for this change?

  1. The newly cabled switch appears under the intended FortiGate controller
  2. A phone registers on the voice subnet while its attached computer remains on data
  3. Both switches discover each other across the approved Layer 2 bridge
  4. Authorized subnet traffic is seen in the correct FortiGate firewall policy logs

Explanation

Correct Answer

C:

This tests the real business behavior: both switches discover each other across the approved Layer 2 bridge. It specifically checks whether the risk that a transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery has been reduced.

Incorrect Answers

A:

The newly cabled switch appears under the intended FortiGate controller. That result would test a control for this other failure: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The question instead requires evidence for: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The direct outcome to verify is: Both switches discover each other across the approved Layer 2 bridge.

B:

At the Maplehaven data network services firm, a result about voice vlan tagging for phones would not show that the team corrected the failure where a transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery.

D:

The offered observation is: Authorized subnet traffic is seen in the correct FortiGate firewall policy logs. It would support the separate mechanism: Local bypass routing can defeat the approved security inspection architecture. In this case the decisive dependency is: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The original keyed verification is: Both switches discover each other across the approved Layer 2 bridge.

Question 160

At the Maplehaven data network services firm, two managed FortiSwitch units must communicate across a transparent bridge that does not pass ordinary LLDP frames. Which setting or practice should be reviewed in future?

  1. Document the control and failure domains of each stack member
  2. Audit DSCP trust rules when access device roles change
  3. Validate edge-port designation whenever a port role changes
  4. Review FortiLink point-to-point settings when intermediate transport changes

Explanation

Correct Answer

D:

For the Maplehaven data network services firm, this maintenance action preserves the fix: review FortiLink point-to-point settings when intermediate transport changes. It should be revisited as the workload evolves.

Incorrect Answers

A:

Document the control and failure domains of each stack member is not the primary recurring safeguard for this problem. The team should review FortiLink point-to-point settings when intermediate transport changes. For the Maplehaven data network services firm, the direct corrective action is to use supported FortiLink point-to-point bridging settings on each relevant inter-switch port.

B:

Audit DSCP trust rules when access device roles change. That safeguard would help prevent recurrence of: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. The risk being reviewed here is instead: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The matching ongoing control is: Review FortiLink point-to-point settings when intermediate transport changes.

C:

The suggested preventive check is: Validate edge-port designation whenever a port role changes. Its technical scope concerns: A non-edge STP transition may delay client connectivity even when no downstream bridge exists. This question asks how to sustain control over: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The more targeted safeguard is: Review FortiLink point-to-point settings when intermediate transport changes.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests