McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 18

Question 170

At the Cedarport campus infrastructure group, two connected FortiSwitch units have differently configured LACP trunk keys and only one member forwards. What risk should the team identify as the primary issue?

  1. Without valid membership tracking multicast may be flooded to non-subscribers
  2. Mismatched LACP negotiation can exclude ports from the intended logical trunk
  3. Unrestricted low-priority demand can fill shared switch buffers during contention
  4. A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery

Explanation

Correct Answer

B:

This identifies the root issue: mismatched LACP negotiation can exclude ports from the intended logical trunk. At the Cedarport campus infrastructure group, the team should therefore align aggregation mode partner settings and member characteristics on both switches.

Incorrect Answers

A:

The offered action is: Without valid membership tracking multicast may be flooded to non-subscribers. It is associated with this separate technical condition: Without valid membership tracking multicast may be flooded to non-subscribers. The actual incident concerns a different dependency: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The corresponding change is: Mismatched LACP negotiation can exclude ports from the intended logical trunk.

C:

The offered alternative is: Unrestricted low-priority demand can fill shared switch buffers during contention. It addresses this separate failure mode: Unrestricted low-priority demand can fill shared switch buffers during contention. In the current case, the observed mechanism is: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The keyed action, Mismatched LACP negotiation can exclude ports from the intended logical trunk., targets that condition more directly.

D:

A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. That is not the mechanism that accounts for the stated failure at the Cedarport campus infrastructure group.

Question 171

At the Cedarport campus infrastructure group, two connected FortiSwitch units have differently configured LACP trunk keys and only one member forwards. What is the strongest acceptance test for this change?

  1. All planned member ports enter the active trunk and survive one-link loss
  2. A traceroute follows the intended next hop and reaches the remote destination
  3. An administrator can reach approved management endpoints while a guest cannot
  4. A ring failure and restoration complete without broadcast storms or authorization loss

Explanation

Correct Answer

A:

Because mismatched LACP negotiation can exclude ports from the intended logical trunk, the required evidence must show that all planned member ports enter the active trunk and survive one-link loss. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Cedarport campus infrastructure group, a result about static route next hop issue would not show that the team corrected the failure where mismatched LACP negotiation can exclude ports from the intended logical trunk.

C:

An administrator can reach approved management endpoints while a guest cannot. That result would test a control for this other failure: Unrestricted management VLAN placement increases exposure to unauthorized device access. The question instead requires evidence for: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The direct outcome to verify is: All planned member ports enter the active trunk and survive one-link loss.

D:

The offered observation is: A ring failure and restoration complete without broadcast storms or authorization loss. It would support the separate mechanism: Redundant physical links need controlled forwarding to prevent Layer 2 loops. In this case the decisive dependency is: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The original keyed verification is: All planned member ports enter the active trunk and survive one-link loss.

Question 172

At the Cedarport campus infrastructure group, two connected FortiSwitch units have differently configured LACP trunk keys and only one member forwards. Which setting or practice should be reviewed in future?

  1. Document static link groups and verify both sides after hardware replacement
  2. Check ISL optics firmware support before network extensions
  3. Audit LACP partner state and configuration drift after port changes
  4. Track unused-port shutdown and authorization changes

Explanation

Correct Answer

C:

The team should audit LACP partner state and configuration drift after port changes. That recurring practice targets the same weakness, namely that mismatched LACP negotiation can exclude ports from the intended logical trunk.

Incorrect Answers

A:

Document static link groups and verify both sides after hardware replacement is not the primary recurring safeguard for this problem. The team should audit LACP partner state and configuration drift after port changes. For the Cedarport campus infrastructure group, the direct corrective action is to align aggregation mode partner settings and member characteristics on both switches.

B:

Check ISL optics firmware support before network extensions. That safeguard would help prevent recurrence of: Optical incompatibility can break discovery and data connectivity regardless of VLAN configuration. The risk being reviewed here is instead: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The matching ongoing control is: Audit LACP partner state and configuration drift after port changes.

D:

Track unused-port shutdown and authorization changes. That safeguard would help prevent recurrence of: An administratively disabled port cannot forward even with functional cable and endpoint. The risk being reviewed here is instead: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The matching ongoing control is: Audit LACP partner state and configuration drift after port changes.

Question 173

At the Pinecrest network security team, a legacy appliance does not speak LACP but technicians configure dynamic negotiation on the FortiSwitch uplinks. Which corrective action best meets the requirement?

  1. Enable the appropriate supported DHCP relay on its designated Layer 3 gateway and permit the required reachability
  2. Select a matched supported transceiver pair for the fiber medium and distance
  3. Align the supported port untagged VLAN handling with the connected device capability
  4. Use a supported static aggregate only if both connected ends are intentionally configured for that mode

Explanation

Correct Answer

D:

For the Pinecrest network security team, the appropriate correction is to use a supported static aggregate only if both connected ends are intentionally configured for that mode. The decisive reason is that a peer that does not negotiate LACP cannot form a dynamic aggregated link; acceptance evidence is that a test aggregate forwards as approved and does not create bridging loops.

Incorrect Answers

A:

The option addresses the separate situation where dHCP broadcasts do not cross routed interfaces without a relay or alternate server path. For this case, the more appropriate response is to use a supported static aggregate only if both connected ends are intentionally configured for that mode. For the Pinecrest network security team, the direct corrective action is to use a supported static aggregate only if both connected ends are intentionally configured for that mode.

B:

The offered action is: Select a matched supported transceiver pair for the fiber medium and distance. It is associated with this separate technical condition: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. The actual incident concerns a different dependency: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The corresponding change is: Use a supported static aggregate only if both connected ends are intentionally configured for that mode.

C:

Align the supported port untagged VLAN handling with the connected device capability can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use a supported static aggregate only if both connected ends are intentionally configured for that mode. For the Pinecrest network security team, the direct corrective action is to use a supported static aggregate only if both connected ends are intentionally configured for that mode.

Question 174

At the Pinecrest network security team, a legacy appliance does not speak LACP but technicians configure dynamic negotiation on the FortiSwitch uplinks. Which underlying issue most directly explains this situation?

  1. A peer that does not negotiate LACP cannot form a dynamic aggregated link
  2. IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries
  3. An available Ethernet port does not mean the power supply has spare PoE capacity
  4. A later hop can undo correct ingress classifications and move packets to the wrong class

Explanation

Correct Answer

A:

The evidence indicates that a peer that does not negotiate LACP cannot form a dynamic aggregated link. The appropriate response is to use a supported static aggregate only if both connected ends are intentionally configured for that mode and demonstrate that a test aggregate forwards as approved and does not create bridging loops.

Incorrect Answers

B:

IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries. That is not the mechanism that accounts for the stated failure at the Pinecrest network security team.

C:

The offered principle is: An available Ethernet port does not mean the power supply has spare PoE capacity. In the source material it is associated with: An available Ethernet port does not mean the power supply has spare PoE capacity. This case has a different controlling cause: A peer that does not negotiate LACP cannot form a dynamic aggregated link. Its keyed mechanism is: A peer that does not negotiate LACP cannot form a dynamic aggregated link.

D:

Although a later hop can undo correct ingress classifications and move packets to the wrong class, the presented symptoms do not support that as the primary cause; they indicate that a peer that does not negotiate LACP cannot form a dynamic aggregated link. For the Pinecrest network security team, the direct corrective action is to use a supported static aggregate only if both connected ends are intentionally configured for that mode.

Question 175

At the Pinecrest network security team, a legacy appliance does not speak LACP but technicians configure dynamic negotiation on the FortiSwitch uplinks. What evidence would justify considering this concern addressed?

  1. Subscribed endpoints receive video while other access ports do not
  2. The connection passes an error-free throughput test
  3. A test aggregate forwards as approved and does not create bridging loops
  4. A controlled redundancy test avoids storms while preserving approved failover

Explanation

Correct Answer

C:

At the Pinecrest network security team, evidence that a test aggregate forwards as approved and does not create bridging loops directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

Subscribed endpoints receive video while other access ports do not. That result would test a control for this other failure: Without valid membership tracking multicast may be flooded to non-subscribers. The question instead requires evidence for: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The direct outcome to verify is: A test aggregate forwards as approved and does not create bridging loops.

B:

The offered observation is: The connection passes an error-free throughput test. It would support the separate mechanism: A speed or duplex mismatch can create retransmissions despite an illuminated link. In this case the decisive dependency is: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The original keyed verification is: A test aggregate forwards as approved and does not create bridging loops.

D:

The offered observation is: A controlled redundancy test avoids storms while preserving approved failover. It would support the separate mechanism: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. In this case the decisive dependency is: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The original keyed verification is: A test aggregate forwards as approved and does not create bridging loops.

Question 176

At the Pinecrest network security team, a legacy appliance does not speak LACP but technicians configure dynamic negotiation on the FortiSwitch uplinks. How should the organization sustain the improvement?

  1. Verify multicast routing and receiver membership after network changes
  2. Document static link groups and verify both sides after hardware replacement
  3. Check ISL optics firmware support before network extensions
  4. Revalidate isolation whenever a new user category is created

Explanation

Correct Answer

B:

For the Pinecrest network security team, this maintenance action preserves the fix: document static link groups and verify both sides after hardware replacement. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Verify multicast routing and receiver membership after network changes. Its technical scope concerns: IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries. This question asks how to sustain control over: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The more targeted safeguard is: Document static link groups and verify both sides after hardware replacement.

C:

That routine supports stack port transceiver selection, but the relevant ongoing risk requires the team to document static link groups and verify both sides after hardware replacement. For the Pinecrest network security team, the direct corrective action is to use a supported static aggregate only if both connected ends are intentionally configured for that mode.

D:

Revalidate isolation whenever a new user category is created. That safeguard would help prevent recurrence of: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The risk being reviewed here is instead: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The matching ongoing control is: Document static link groups and verify both sides after hardware replacement.

Question 177

At the Dartwood managed-network provider, a standalone FortiSwitch has Layer 2 VLANs configured but no Layer 3 interface or route between required subnets. Which approach best resolves the described issue?

  1. Use a supported static aggregate only if both connected ends are intentionally configured for that mode
  2. Check the complete device path for LLDP-MED delivery and use a supported alternate voice policy where required
  3. Build a supported FortiLink ring or redundant topology and test failover behavior
  4. Configure supported VLAN interfaces and necessary routes on a model with the required routing capability

Explanation

Correct Answer

D:

Configure supported VLAN interfaces and necessary routes on a model with the required routing capability is the best response because separate VLAN broadcast domains do not communicate without an approved Layer 3 path. A focused validation would establish that an approved cross-subnet test succeeds while an unapproved flow remains blocked.

Incorrect Answers

A:

Use a supported static aggregate only if both connected ends are intentionally configured for that mode can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to configure supported VLAN interfaces and necessary routes on a model with the required routing capability. For the Dartwood managed-network provider, the direct corrective action is to configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

B:

The offered action is: Check the complete device path for LLDP-MED delivery and use a supported alternate voice policy where required. It is associated with this separate technical condition: An intermediary can block discovery advertisements even when Ethernet connectivity works. The actual incident concerns a different dependency: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The corresponding change is: Configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

C:

This alternative would be suitable where a daisy chain creates a single path dependency for management and potentially user data. It does not by itself resolve the need to configure supported VLAN interfaces and necessary routes on a model with the required routing capability. For the Dartwood managed-network provider, the direct corrective action is to configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

Question 178

At the Dartwood managed-network provider, a standalone FortiSwitch has Layer 2 VLANs configured but no Layer 3 interface or route between required subnets. Which explanation best accounts for the concern?

  1. A route pointing at an unreachable neighbor cannot forward outside connected subnets
  2. A physically healthy trunk does not automatically carry every VLAN identifier
  3. Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues
  4. Separate VLAN broadcast domains do not communicate without an approved Layer 3 path

Explanation

Correct Answer

D:

This identifies the root issue: separate VLAN broadcast domains do not communicate without an approved Layer 3 path. At the Dartwood managed-network provider, the team should therefore configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

Incorrect Answers

A:

The offered principle is: A route pointing at an unreachable neighbor cannot forward outside connected subnets. In the source material it is associated with: A route pointing at an unreachable neighbor cannot forward outside connected subnets. This case has a different controlling cause: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. Its keyed mechanism is: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path.

B:

Although a physically healthy trunk does not automatically carry every VLAN identifier, the presented symptoms do not support that as the primary cause; they indicate that separate VLAN broadcast domains do not communicate without an approved Layer 3 path. For the Dartwood managed-network provider, the direct corrective action is to configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

C:

The offered principle is: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. In the source material it is associated with: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. This case has a different controlling cause: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. Its keyed mechanism is: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path.

Question 179

At the Dartwood managed-network provider, a standalone FortiSwitch has Layer 2 VLANs configured but no Layer 3 interface or route between required subnets. Which test result best shows the requirement is met?

  1. The gateway ARP entry resolves consistently and off-subnet traffic stays stable
  2. A congestion test protects voice delay while file traffic remains best effort
  3. Two isolated endpoints cannot reach each other but can reach their authorized gateway
  4. An approved cross-subnet test succeeds while an unapproved flow remains blocked

Explanation

Correct Answer

D:

The team can confirm the fix by showing that an approved cross-subnet test succeeds while an unapproved flow remains blocked. This aligns with the corrective design to configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

Incorrect Answers

A:

The gateway ARP entry resolves consistently and off-subnet traffic stays stable. That result would test a control for this other failure: Duplicate IP responses cause unstable next-hop MAC resolution. The question instead requires evidence for: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The direct outcome to verify is: An approved cross-subnet test succeeds while an unapproved flow remains blocked.

B:

The offered observation is: A congestion test protects voice delay while file traffic remains best effort. It would support the separate mechanism: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. In this case the decisive dependency is: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The original keyed verification is: An approved cross-subnet test succeeds while an unapproved flow remains blocked.

C:

Two isolated endpoints cannot reach each other but can reach their authorized gateway. That result would test a control for this other failure: Putting endpoints in the same ordinary VLAN permits direct Layer 2 communication unless isolation is configured. The question instead requires evidence for: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The direct outcome to verify is: An approved cross-subnet test succeeds while an unapproved flow remains blocked.

Question 180

At the Dartwood managed-network provider, a standalone FortiSwitch has Layer 2 VLANs configured but no Layer 3 interface or route between required subnets. Which ongoing control best prevents this issue from recurring?

  1. Maintain VLAN gateway ownership and route inventories
  2. Audit LACP partner state and configuration drift after port changes
  3. Maintain one reviewed VLAN inventory for all sites
  4. Review private VLAN and promiscuous-port assignments after server moves

Explanation

Correct Answer

A:

The continuing safeguard is to maintain VLAN gateway ownership and route inventories. It helps avoid the original condition: separate VLAN broadcast domains do not communicate without an approved Layer 3 path.

Incorrect Answers

B:

Audit LACP partner state and configuration drift after port changes. That safeguard would help prevent recurrence of: Mismatched LACP negotiation can exclude ports from the intended logical trunk. The risk being reviewed here is instead: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The matching ongoing control is: Maintain VLAN gateway ownership and route inventories.

C:

Maintain one reviewed VLAN inventory for all sites is not the primary recurring safeguard for this problem. The team should maintain VLAN gateway ownership and route inventories. For the Dartwood managed-network provider, the direct corrective action is to configure supported VLAN interfaces and necessary routes on a model with the required routing capability.

D:

Review private VLAN and promiscuous-port assignments after server moves. That safeguard would help prevent recurrence of: Putting endpoints in the same ordinary VLAN permits direct Layer 2 communication unless isolation is configured. The risk being reviewed here is instead: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The matching ongoing control is: Maintain VLAN gateway ownership and route inventories.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests