McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 2

Question 10

At the Ashbourne data network services firm, a legacy controller requires untagged frames while its switch port sends the service VLAN tagged. Which explanation best accounts for the concern?

  1. A MAC classification mismatch can override the VLAN intended for a known endpoint
  2. A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state
  3. A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device
  4. Gigabit copper Ethernet needs correctly functioning cable pairs and termination

Explanation

Correct Answer

C:

The situation shows that a frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device, rather than merely a monitoring or presentation issue. Remediation is to align the supported port untagged VLAN handling with the connected device capability.

Incorrect Answers

A:

The offered principle is: A MAC classification mismatch can override the VLAN intended for a known endpoint. In the source material it is associated with: A MAC classification mismatch can override the VLAN intended for a known endpoint. This case has a different controlling cause: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. Its keyed mechanism is: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device.

B:

Although a phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state, the presented symptoms do not support that as the primary cause; they indicate that a frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. For the Ashbourne data network services firm, the direct corrective action is to align the supported port untagged VLAN handling with the connected device capability.

D:

Gigabit copper Ethernet needs correctly functioning cable pairs and termination. That may occur elsewhere, but the evidence at the Ashbourne data network services firm instead points to the fact that a frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device.

Question 11

At the Ashbourne data network services firm, a legacy controller requires untagged frames while its switch port sends the service VLAN tagged. Which test result best shows the requirement is met?

  1. An allowed cross-VLAN test reaches the service and a denied test is blocked by policy
  2. A packet trace shows the controller receives untagged frames for its correct VLAN
  3. The newly cabled switch appears under the intended FortiGate controller
  4. A dual-homed test device retains forwarding after either peer path fails

Explanation

Correct Answer

B:

This is the relevant acceptance result: a packet trace shows the controller receives untagged frames for its correct VLAN. It demonstrates the outcome of choosing to align the supported port untagged VLAN handling with the connected device capability.

Incorrect Answers

A:

An allowed cross-VLAN test reaches the service and a denied test is blocked by policy. That result would test a control for this other failure: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. The question instead requires evidence for: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The direct outcome to verify is: A packet trace shows the controller receives untagged frames for its correct VLAN.

C:

The newly cabled switch appears under the intended FortiGate controller. That result would test a control for this other failure: A physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. The question instead requires evidence for: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The direct outcome to verify is: A packet trace shows the controller receives untagged frames for its correct VLAN.

D:

At the Ashbourne data network services firm, a result about mclag inter chassis configuration would not show that the team corrected the failure where a frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device.

Question 12

At the Ashbourne data network services firm, a legacy controller requires untagged frames while its switch port sends the service VLAN tagged. Which ongoing control best prevents this issue from recurring?

  1. Audit management VLAN routing and permissions during new site turnups
  2. Recheck port speed after transceiver replacements
  3. Check port tagging agreements during legacy device replacements
  4. Verify multicast routing and receiver membership after network changes

Explanation

Correct Answer

C:

After implementation, the team should check port tagging agreements during legacy device replacements as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports management vlan exposure, but the relevant ongoing risk requires the team to check port tagging agreements during legacy device replacements. For the Ashbourne data network services firm, the direct corrective action is to align the supported port untagged VLAN handling with the connected device capability.

B:

Recheck port speed after transceiver replacements. That safeguard would help prevent recurrence of: Incompatible speed configuration can prevent stable physical link negotiation. The risk being reviewed here is instead: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The matching ongoing control is: Check port tagging agreements during legacy device replacements.

D:

Verify multicast routing and receiver membership after network changes. That safeguard would help prevent recurrence of: IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries. The risk being reviewed here is instead: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The matching ongoing control is: Check port tagging agreements during legacy device replacements.

Question 13

At the Quayside switching consultancy, a branch places guest terminals in the same broadcast segment as financial workstations. Which implementation choice best addresses the situation?

  1. Evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation
  2. Examine STP states and the recently added links before correcting the actual loop
  3. Apply supported ingress rate limiting or policing to the guest traffic class with appropriate thresholds
  4. Create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway

Explanation

Correct Answer

D:

The primary failure mode is that a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The proposed action directly fixes it by requiring the team to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway; afterward, verify that guest test traffic cannot reach staff endpoints while approved internet access works.

Incorrect Answers

A:

This alternative would be suitable where an ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. It does not by itself resolve the need to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway. For the Quayside switching consultancy, the direct corrective action is to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway.

B:

Examine STP states and the recently added links before correcting the actual loop addresses a different kind of problem: an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. Here the reported weakness is that a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. For the Quayside switching consultancy, the direct corrective action is to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway.

C:

The option addresses the separate situation where unrestricted low-priority demand can fill shared switch buffers during contention. For this case, the more appropriate response is to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway. For the Quayside switching consultancy, the direct corrective action is to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway.

Question 14

At the Quayside switching consultancy, a branch places guest terminals in the same broadcast segment as financial workstations. What risk should the team identify as the primary issue?

  1. The same department traffic can enter different broadcast domains when trunk identifiers disagree
  2. Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues
  3. A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated
  4. A later hop can undo correct ingress classifications and move packets to the wrong class

Explanation

Correct Answer

C:

The evidence indicates that a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The appropriate response is to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway and demonstrate that guest test traffic cannot reach staff endpoints while approved internet access works.

Incorrect Answers

A:

The offered action is: The same department traffic can enter different broadcast domains when trunk identifiers disagree. It is associated with this separate technical condition: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The actual incident concerns a different dependency: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The corresponding change is: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated.

B:

Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. That may occur elsewhere, but the evidence at the Quayside switching consultancy instead points to the fact that a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated.

D:

A later hop can undo correct ingress classifications and move packets to the wrong class. That is not the mechanism that accounts for the stated failure at the Quayside switching consultancy.

Question 15

At the Quayside switching consultancy, a branch places guest terminals in the same broadcast segment as financial workstations. What is the strongest acceptance test for this change?

  1. A tagged test host reaches its permitted peer across the complete path
  2. A test client receives the correct lease through the approved relay
  3. Guest test traffic cannot reach staff endpoints while approved internet access works
  4. A controlled power limit preserves critical phones and sheds approved lower-priority loads

Explanation

Correct Answer

C:

This tests the real business behavior: guest test traffic cannot reach staff endpoints while approved internet access works. It specifically checks whether the risk that a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated has been reduced.

Incorrect Answers

A:

A tagged test host reaches its permitted peer across the complete path. That result would test a control for this other failure: A physically healthy trunk does not automatically carry every VLAN identifier. The question instead requires evidence for: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The direct outcome to verify is: Guest test traffic cannot reach staff endpoints while approved internet access works.

B:

At the Quayside switching consultancy, a result about dhcp relay for separate subnet would not show that the team corrected the failure where a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated.

D:

The offered observation is: A controlled power limit preserves critical phones and sheds approved lower-priority loads. It would support the separate mechanism: Default power allocation order may not protect the most important devices during shortage. In this case the decisive dependency is: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The original keyed verification is: Guest test traffic cannot reach staff endpoints while approved internet access works.

Question 16

At the Quayside switching consultancy, a branch places guest terminals in the same broadcast segment as financial workstations. Which setting or practice should be reviewed in future?

  1. Monitor MAC-based classification matches after equipment replacement
  2. Audit DSCP trust rules when access device roles change
  3. Revalidate isolation whenever a new user category is created
  4. Recheck FortiLink aggregate support against FortiOS upgrades

Explanation

Correct Answer

C:

The team should revalidate isolation whenever a new user category is created. That recurring practice targets the same weakness, namely that a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated.

Incorrect Answers

A:

Monitor MAC-based classification matches after equipment replacement is not the primary recurring safeguard for this problem. The team should revalidate isolation whenever a new user category is created. For the Quayside switching consultancy, the direct corrective action is to create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway.

B:

Audit DSCP trust rules when access device roles change. That safeguard would help prevent recurrence of: Accepting arbitrary endpoint DSCP values lets a low-priority source consume priority queues. The risk being reviewed here is instead: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The matching ongoing control is: Revalidate isolation whenever a new user category is created.

D:

Recheck FortiLink aggregate support against FortiOS upgrades. That safeguard would help prevent recurrence of: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. The risk being reviewed here is instead: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. The matching ongoing control is: Revalidate isolation whenever a new user category is created.

Question 17

At the Cedarport infrastructure service operator, two neighboring switches assign different VLAN numbers to the same production department. Which corrective action best meets the requirement?

  1. Reconcile the VLAN identification plan and consistent tagging through each inter-switch hop
  2. Align the supported port untagged VLAN handling with the connected device capability
  3. Trace QoS classification and remarking along the FortiSwitch forwarding path
  4. Account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: reconcile the VLAN identification plan and consistent tagging through each inter-switch hop. The observed risk is that the same department traffic can enter different broadcast domains when trunk identifiers disagree; a passing acceptance check would show that a tagged packet retains the authorized VLAN identity across both devices.

Incorrect Answers

B:

The offered action is: Align the supported port untagged VLAN handling with the connected device capability. It is associated with this separate technical condition: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The actual incident concerns a different dependency: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The corresponding change is: Reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

C:

Trace QoS classification and remarking along the FortiSwitch forwarding path can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop. For the Cedarport infrastructure service operator, the direct corrective action is to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

D:

The offered alternative is: Account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding. It addresses this separate failure mode: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In the current case, the observed mechanism is: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The keyed action, Reconcile the VLAN identification plan and consistent tagging through each inter-switch hop., targets that condition more directly.

Question 18

At the Cedarport infrastructure service operator, two neighboring switches assign different VLAN numbers to the same production department. Which underlying issue most directly explains this situation?

  1. A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated
  2. Default power allocation order may not protect the most important devices during shortage
  3. The same department traffic can enter different broadcast domains when trunk identifiers disagree
  4. A saved QoS policy does not prove that the intended packets actually match its queue

Explanation

Correct Answer

C:

The strongest explanation is that the same department traffic can enter different broadcast domains when trunk identifiers disagree. This accounts for the outcome and supports the action to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

Incorrect Answers

A:

The offered principle is: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. In the source material it is associated with: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. This case has a different controlling cause: The same department traffic can enter different broadcast domains when trunk identifiers disagree. Its keyed mechanism is: The same department traffic can enter different broadcast domains when trunk identifiers disagree.

B:

Default power allocation order may not protect the most important devices during shortage. That is not the mechanism that accounts for the stated failure at the Cedarport infrastructure service operator.

D:

Although a saved QoS policy does not prove that the intended packets actually match its queue, the presented symptoms do not support that as the primary cause; they indicate that the same department traffic can enter different broadcast domains when trunk identifiers disagree. For the Cedarport infrastructure service operator, the direct corrective action is to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

Question 19

At the Cedarport infrastructure service operator, two neighboring switches assign different VLAN numbers to the same production department. What evidence would justify considering this concern addressed?

  1. A packet trace shows the controller receives untagged frames for its correct VLAN
  2. A targeted diagnostic identifies the failing component and forwarding recovers after repair
  3. The downstream serial number appears for authorization with the correct uplink topology
  4. A tagged packet retains the authorized VLAN identity across both devices

Explanation

Correct Answer

D:

This is the relevant acceptance result: a tagged packet retains the authorized VLAN identity across both devices. It demonstrates the outcome of choosing to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

Incorrect Answers

A:

A packet trace shows the controller receives untagged frames for its correct VLAN. That result would test a control for this other failure: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The question instead requires evidence for: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The direct outcome to verify is: A tagged packet retains the authorized VLAN identity across both devices.

B:

The offered observation is: A targeted diagnostic identifies the failing component and forwarding recovers after repair. It would support the separate mechanism: Physical port faults cannot be distinguished from configuration causes by restart alone. In this case the decisive dependency is: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The original keyed verification is: A tagged packet retains the authorized VLAN identity across both devices.

C:

The downstream serial number appears for authorization with the correct uplink topology. That result would test a control for this other failure: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. The question instead requires evidence for: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The direct outcome to verify is: A tagged packet retains the authorized VLAN identity across both devices.

Question 20

At the Cedarport infrastructure service operator, two neighboring switches assign different VLAN numbers to the same production department. How should the organization sustain the improvement?

  1. Review private VLAN and promiscuous-port assignments after server moves
  2. Maintain one reviewed VLAN inventory for all sites
  3. Maintain a supported optics and fiber inventory
  4. Remove temporary mirroring after approved diagnostics

Explanation

Correct Answer

B:

For the Cedarport infrastructure service operator, this maintenance action preserves the fix: maintain one reviewed VLAN inventory for all sites. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Review private VLAN and promiscuous-port assignments after server moves. Its technical scope concerns: Putting endpoints in the same ordinary VLAN permits direct Layer 2 communication unless isolation is configured. This question asks how to sustain control over: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The more targeted safeguard is: Maintain one reviewed VLAN inventory for all sites.

C:

That routine supports sfp wavelength pairing, but the relevant ongoing risk requires the team to maintain one reviewed VLAN inventory for all sites. For the Cedarport infrastructure service operator, the direct corrective action is to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

D:

Remove temporary mirroring after approved diagnostics. That safeguard would help prevent recurrence of: Ordinary switching does not clone unrelated transit traffic to a monitoring port. The risk being reviewed here is instead: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The matching ongoing control is: Maintain one reviewed VLAN inventory for all sites.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests