McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 3

Question 20

At the Cedarport infrastructure service operator, two neighboring switches assign different VLAN numbers to the same production department. How should the organization sustain the improvement?

  1. Review private VLAN and promiscuous-port assignments after server moves
  2. Maintain one reviewed VLAN inventory for all sites
  3. Maintain a supported optics and fiber inventory
  4. Remove temporary mirroring after approved diagnostics

Explanation

Correct Answer

B:

For the Cedarport infrastructure service operator, this maintenance action preserves the fix: maintain one reviewed VLAN inventory for all sites. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Review private VLAN and promiscuous-port assignments after server moves. Its technical scope concerns: Putting endpoints in the same ordinary VLAN permits direct Layer 2 communication unless isolation is configured. This question asks how to sustain control over: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The more targeted safeguard is: Maintain one reviewed VLAN inventory for all sites.

C:

That routine supports sfp wavelength pairing, but the relevant ongoing risk requires the team to maintain one reviewed VLAN inventory for all sites. For the Cedarport infrastructure service operator, the direct corrective action is to reconcile the VLAN identification plan and consistent tagging through each inter-switch hop.

D:

Remove temporary mirroring after approved diagnostics. That safeguard would help prevent recurrence of: Ordinary switching does not clone unrelated transit traffic to a monitoring port. The risk being reviewed here is instead: The same department traffic can enter different broadcast domains when trunk identifiers disagree. The matching ongoing control is: Maintain one reviewed VLAN inventory for all sites.

Question 21

At the Pinecrest campus infrastructure group, a FortiGate-managed FortiSwitch VLAN has local Layer 2 connectivity but no approved route to an enterprise service. Which approach best resolves the described issue?

  1. Correct the supported MAC-based VLAN classification rule and validate precedence on the target platform
  2. Inspect the supported routing table and route precedence before changing link configuration
  3. Create and authorize the required FortiGate VLAN interface and corresponding firewall policy
  4. Set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly

Explanation

Correct Answer

C:

This solution addresses the stated limitation: layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. Implementing it means the team should create and authorize the required FortiGate VLAN interface and corresponding firewall policy, then verify that an allowed cross-VLAN test reaches the service and a denied test is blocked by policy.

Incorrect Answers

A:

Correct the supported MAC-based VLAN classification rule and validate precedence on the target platform can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to create and authorize the required FortiGate VLAN interface and corresponding firewall policy. For the Pinecrest campus infrastructure group, the direct corrective action is to create and authorize the required FortiGate VLAN interface and corresponding firewall policy.

B:

The offered action is: Inspect the supported routing table and route precedence before changing link configuration. It is associated with this separate technical condition: Configured intent may not match the route actually selected for forwarding. The actual incident concerns a different dependency: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. The corresponding change is: Create and authorize the required FortiGate VLAN interface and corresponding firewall policy.

D:

Set supported static ISL auto VLAN behavior or maintain its approved VLAN membership explicitly addresses a different kind of problem: a manually created ISL may not carry new managed VLANs when automatic membership is disabled. Here the reported weakness is that layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. For the Pinecrest campus infrastructure group, the direct corrective action is to create and authorize the required FortiGate VLAN interface and corresponding firewall policy.

Question 22

At the Pinecrest campus infrastructure group, a FortiGate-managed FortiSwitch VLAN has local Layer 2 connectivity but no approved route to an enterprise service. Which explanation best accounts for the concern?

  1. Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding
  2. Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation
  3. A later hop can undo correct ingress classifications and move packets to the wrong class
  4. A manually created ISL may not carry new managed VLANs when automatic membership is disabled

Explanation

Correct Answer

A:

The strongest explanation is that layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. This accounts for the outcome and supports the action to create and authorize the required FortiGate VLAN interface and corresponding firewall policy.

Incorrect Answers

B:

Although untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation, the presented symptoms do not support that as the primary cause; they indicate that layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. For the Pinecrest campus infrastructure group, the direct corrective action is to create and authorize the required FortiGate VLAN interface and corresponding firewall policy.

C:

The offered principle is: A later hop can undo correct ingress classifications and move packets to the wrong class. In the source material it is associated with: A later hop can undo correct ingress classifications and move packets to the wrong class. This case has a different controlling cause: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. Its keyed mechanism is: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding.

D:

A manually created ISL may not carry new managed VLANs when automatic membership is disabled. That may occur elsewhere, but the evidence at the Pinecrest campus infrastructure group instead points to the fact that layer 2 VLAN membership alone does not authorize or provide inter-network forwarding.

Question 23

At the Pinecrest campus infrastructure group, a FortiGate-managed FortiSwitch VLAN has local Layer 2 connectivity but no approved route to an enterprise service. Which test result best shows the requirement is met?

  1. A validation set passes each approved tagged VLAN without forwarding an unapproved one
  2. The link operates at the agreed speed and error counters remain stable
  3. An allowed cross-VLAN test reaches the service and a denied test is blocked by policy
  4. A test aggregate forwards as approved and does not create bridging loops

Explanation

Correct Answer

C:

Because layer 2 VLAN membership alone does not authorize or provide inter-network forwarding, the required evidence must show that an allowed cross-VLAN test reaches the service and a denied test is blocked by policy. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

A validation set passes each approved tagged VLAN without forwarding an unapproved one. That result would test a control for this other failure: An access-style port assignment can discard tagged traffic expected by upstream switches. The question instead requires evidence for: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. The direct outcome to verify is: An allowed cross-VLAN test reaches the service and a denied test is blocked by policy.

B:

The offered observation is: The link operates at the agreed speed and error counters remain stable. It would support the separate mechanism: Incompatible speed configuration can prevent stable physical link negotiation. In this case the decisive dependency is: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. The original keyed verification is: An allowed cross-VLAN test reaches the service and a denied test is blocked by policy.

D:

At the Pinecrest campus infrastructure group, a result about static lag when peer lacks lacp would not show that the team corrected the failure where layer 2 VLAN membership alone does not authorize or provide inter-network forwarding.

Question 24

At the Pinecrest campus infrastructure group, a FortiGate-managed FortiSwitch VLAN has local Layer 2 connectivity but no approved route to an enterprise service. Which ongoing control best prevents this issue from recurring?

  1. Review FortiGate interface policies when switch VLAN usage changes
  2. Verify device and service compatibility before provisioning another tenant
  3. Maintain a supported optics and fiber inventory
  4. Review protected edge ports during new device installation

Explanation

Correct Answer

A:

The continuing safeguard is to review FortiGate interface policies when switch VLAN usage changes. It helps avoid the original condition: layer 2 VLAN membership alone does not authorize or provide inter-network forwarding.

Incorrect Answers

B:

Verify device and service compatibility before provisioning another tenant. That safeguard would help prevent recurrence of: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. The risk being reviewed here is instead: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. The matching ongoing control is: Review FortiGate interface policies when switch VLAN usage changes.

C:

Maintain a supported optics and fiber inventory is not the primary recurring safeguard for this problem. The team should review FortiGate interface policies when switch VLAN usage changes. For the Pinecrest campus infrastructure group, the direct corrective action is to create and authorize the required FortiGate VLAN interface and corresponding firewall policy.

D:

Review protected edge ports during new device installation. That safeguard would help prevent recurrence of: Unexpected bridge protocol frames on an edge port indicate a possible unauthorized loop. The risk being reviewed here is instead: Layer 2 VLAN membership alone does not authorize or provide inter-network forwarding. The matching ongoing control is: Review FortiGate interface policies when switch VLAN usage changes.

Question 25

At the Dartwood network security team, a switch uplink is accidentally converted to a single access VLAN and drops several tagged services. Which implementation choice best addresses the situation?

  1. Enable the approved SSID tagged VLANs on the FortiSwitch uplink while maintaining management access
  2. Restore the supported uplink membership that carries all approved service VLANs
  3. Enable the appropriate supported DHCP relay on its designated Layer 3 gateway and permit the required reachability
  4. Enable approved LLDP transmit and receive on required trusted infrastructure interfaces

Explanation

Correct Answer

B:

Restore the supported uplink membership that carries all approved service VLANs is the best response because an access-style port assignment can discard tagged traffic expected by upstream switches. A focused validation would establish that a validation set passes each approved tagged VLAN without forwarding an unapproved one.

Incorrect Answers

A:

This alternative would be suitable where an access point may be reachable for management while client VLAN tags are filtered. It does not by itself resolve the need to restore the supported uplink membership that carries all approved service VLANs. For the Dartwood network security team, the direct corrective action is to restore the supported uplink membership that carries all approved service VLANs.

C:

The option addresses the separate situation where dHCP broadcasts do not cross routed interfaces without a relay or alternate server path. For this case, the more appropriate response is to restore the supported uplink membership that carries all approved service VLANs. For the Dartwood network security team, the direct corrective action is to restore the supported uplink membership that carries all approved service VLANs.

D:

The offered alternative is: Enable approved LLDP transmit and receive on required trusted infrastructure interfaces. It addresses this separate failure mode: Neighbor discovery cannot build topology when needed LLDP frames are not transmitted or accepted. In the current case, the observed mechanism is: An access-style port assignment can discard tagged traffic expected by upstream switches. The keyed action, Restore the supported uplink membership that carries all approved service VLANs., targets that condition more directly.

Question 26

At the Dartwood network security team, a switch uplink is accidentally converted to a single access VLAN and drops several tagged services. What risk should the team identify as the primary issue?

  1. Simple native VLAN handling cannot distinguish service traffic by defined protocol selectors
  2. One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths
  3. An access-style port assignment can discard tagged traffic expected by upstream switches
  4. Ordinary switching does not clone unrelated transit traffic to a monitoring port

Explanation

Correct Answer

C:

The evidence indicates that an access-style port assignment can discard tagged traffic expected by upstream switches. The appropriate response is to restore the supported uplink membership that carries all approved service VLANs and demonstrate that a validation set passes each approved tagged VLAN without forwarding an unapproved one.

Incorrect Answers

A:

The offered action is: Simple native VLAN handling cannot distinguish service traffic by defined protocol selectors. It is associated with this separate technical condition: Simple native VLAN handling cannot distinguish service traffic by defined protocol selectors. The actual incident concerns a different dependency: An access-style port assignment can discard tagged traffic expected by upstream switches. The corresponding change is: An access-style port assignment can discard tagged traffic expected by upstream switches.

B:

One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. That may occur elsewhere, but the evidence at the Dartwood network security team instead points to the fact that an access-style port assignment can discard tagged traffic expected by upstream switches.

D:

Ordinary switching does not clone unrelated transit traffic to a monitoring port. That is not the mechanism that accounts for the stated failure at the Dartwood network security team.

Question 27

At the Dartwood network security team, a switch uplink is accidentally converted to a single access VLAN and drops several tagged services. What is the strongest acceptance test for this change?

  1. Clients on each SSID receive the matching permitted subnet and isolation rules
  2. The chosen optic appears in supported compatibility information and establishes its specified link
  3. A test phone discovers the voice VLAN and obtains its voice network address
  4. A validation set passes each approved tagged VLAN without forwarding an unapproved one

Explanation

Correct Answer

D:

The intended correction is to restore the supported uplink membership that carries all approved service VLANs. The decisive verification is that a validation set passes each approved tagged VLAN without forwarding an unapproved one, rather than only confirming configuration was saved.

Incorrect Answers

A:

Clients on each SSID receive the matching permitted subnet and isolation rules. That result would test a control for this other failure: An access point may be reachable for management while client VLAN tags are filtered. The question instead requires evidence for: An access-style port assignment can discard tagged traffic expected by upstream switches. The direct outcome to verify is: A validation set passes each approved tagged VLAN without forwarding an unapproved one.

B:

At the Dartwood network security team, a result about transceiver feature matrix limits would not show that the team corrected the failure where an access-style port assignment can discard tagged traffic expected by upstream switches.

C:

A test phone discovers the voice VLAN and obtains its voice network address. That result would test a control for this other failure: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. The question instead requires evidence for: An access-style port assignment can discard tagged traffic expected by upstream switches. The direct outcome to verify is: A validation set passes each approved tagged VLAN without forwarding an unapproved one.

Question 28

At the Dartwood network security team, a switch uplink is accidentally converted to a single access VLAN and drops several tagged services. Which setting or practice should be reviewed in future?

  1. Compare uplink profiles with an approved baseline before cabling changes
  2. Verify device and service compatibility before provisioning another tenant
  3. Monitor repeated violations rather than clearing the state blindly
  4. Review storm-control thresholds against legitimate peak traffic

Explanation

Correct Answer

A:

After implementation, the team should compare uplink profiles with an approved baseline before cabling changes as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Verify device and service compatibility before provisioning another tenant. That safeguard would help prevent recurrence of: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. The risk being reviewed here is instead: An access-style port assignment can discard tagged traffic expected by upstream switches. The matching ongoing control is: Compare uplink profiles with an approved baseline before cabling changes.

C:

The suggested preventive check is: Monitor repeated violations rather than clearing the state blindly. Its technical scope concerns: A switch safety action can disable forwarding independently of physical link health. This question asks how to sustain control over: An access-style port assignment can discard tagged traffic expected by upstream switches. The more targeted safeguard is: Compare uplink profiles with an approved baseline before cabling changes.

D:

Review storm-control thresholds against legitimate peak traffic. That safeguard would help prevent recurrence of: Excess broadcasts can consume shared switching bandwidth and CPU resources. The risk being reviewed here is instead: An access-style port assignment can discard tagged traffic expected by upstream switches. The matching ongoing control is: Compare uplink profiles with an approved baseline before cabling changes.

Question 29

At the Tarnbridge managed-network provider, a provider handoff must transport several customer VLANs through one carrier service but engineers plan a simple access VLAN. Which corrective action best meets the requirement?

  1. Add the approved VLAN to the permitted VLAN set on each required trunk hop
  2. Keep policy-controlled inter-VLAN routing on the designated FortiGate gateway and configure switch VLAN membership accordingly
  3. Evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation
  4. Inspect PoE power allocation and any supported LLDP-MED power negotiation information

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation because an ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. A suitable test confirms that traffic from two customer VLANs crosses with distinct inner identifiers intact.

Incorrect Answers

A:

The option addresses the separate situation where a physically healthy trunk does not automatically carry every VLAN identifier. For this case, the more appropriate response is to evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation. For the Tarnbridge managed-network provider, the direct corrective action is to evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation.

B:

The offered action is: Keep policy-controlled inter-VLAN routing on the designated FortiGate gateway and configure switch VLAN membership accordingly. It is associated with this separate technical condition: Local bypass routing can defeat the approved security inspection architecture. The actual incident concerns a different dependency: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. The corresponding change is: Evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation.

D:

The offered alternative is: Inspect PoE power allocation and any supported LLDP-MED power negotiation information. It addresses this separate failure mode: Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. In the current case, the observed mechanism is: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. The keyed action, Evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation., targets that condition more directly.

Question 30

At the Tarnbridge managed-network provider, a provider handoff must transport several customer VLANs through one carrier service but engineers plan a simple access VLAN. Which underlying issue most directly explains this situation?

  1. An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff
  2. Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation
  3. FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply
  4. IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries

Explanation

Correct Answer

A:

The evidence indicates that an ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. The appropriate response is to evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation and demonstrate that traffic from two customer VLANs crosses with distinct inner identifiers intact.

Incorrect Answers

B:

Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. That is not the mechanism that accounts for the stated failure at the Tarnbridge managed-network provider.

C:

The offered principle is: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. In the source material it is associated with: FortiLink aggregate requirements are topology-specific and ordinary client LAG assumptions may not apply. This case has a different controlling cause: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. Its keyed mechanism is: An ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff.

D:

Although IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries, the presented symptoms do not support that as the primary cause; they indicate that an ordinary access VLAN cannot preserve multiple independent customer VLAN identities across a provider handoff. For the Tarnbridge managed-network provider, the direct corrective action is to evaluate supported QinQ VLAN stacking with correct outer tag and customer tag preservation.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests