McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 41

Question 400

At the Birchhaven data network services firm, a small office introduces a managed FortiSwitch but installs redundant layers and a second controller without a business requirement. Which setting or practice should be reviewed in future?

  1. Validate port-specific topology constraints before branch construction
  2. Review FortiGate administrator roles each quarter
  3. Review QoS model support for pooled tenant ports
  4. Reassess topology only when availability requirements grow

Explanation

Correct Answer

D:

For the Birchhaven data network services firm, this maintenance action preserves the fix: reassess topology only when availability requirements grow. It should be revisited as the workload evolves.

Incorrect Answers

A:

Validate port-specific topology constraints before branch construction is not the primary recurring safeguard for this problem. The team should reassess topology only when availability requirements grow. For the Birchhaven data network services firm, the direct corrective action is to use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role.

B:

Review FortiGate administrator roles each quarter. That safeguard would help prevent recurrence of: Excess controller privileges allow unintended changes to managed switch configurations. The risk being reviewed here is instead: A simple managed site can be operated without unnecessary high-availability interconnections. The matching ongoing control is: Reassess topology only when availability requirements grow.

C:

The suggested preventive check is: Review QoS model support for pooled tenant ports. Its technical scope concerns: Not all advanced switch features are available on shared tenant ports. This question asks how to sustain control over: A simple managed site can be operated without unnecessary high-availability interconnections. The more targeted safeguard is: Reassess topology only when availability requirements grow.

Question 401

At the Oakport regional network integrator, a retail complex extends an unprotected chain of switches and a middle-link failure disconnects several downstream sites. Which corrective action best meets the requirement?

  1. Use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role
  2. Use supported managed-switch templates or controller policy objects for compatible site groups
  3. Move to a supported ring or redundant FortiLink topology with verified control-plane continuity
  4. Create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should move to a supported ring or redundant FortiLink topology with verified control-plane continuity because a linear FortiLink chain has single-link failure dependencies for devices beyond the break. A suitable test confirms that a planned ISL failure retains reachability to the remaining managed units.

Incorrect Answers

A:

The option addresses the separate situation where a simple managed site can be operated without unnecessary high-availability interconnections. For this case, the more appropriate response is to move to a supported ring or redundant FortiLink topology with verified control-plane continuity. For the Oakport regional network integrator, the direct corrective action is to move to a supported ring or redundant FortiLink topology with verified control-plane continuity.

B:

The offered action is: Use supported managed-switch templates or controller policy objects for compatible site groups. It is associated with this separate technical condition: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The actual incident concerns a different dependency: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The corresponding change is: Move to a supported ring or redundant FortiLink topology with verified control-plane continuity.

D:

The offered alternative is: Create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope. It addresses this separate failure mode: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. In the current case, the observed mechanism is: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The keyed action, Move to a supported ring or redundant FortiLink topology with verified control-plane continuity., targets that condition more directly.

Question 402

At the Oakport regional network integrator, a retail complex extends an unprotected chain of switches and a middle-link failure disconnects several downstream sites. Which underlying issue most directly explains this situation?

  1. Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery
  2. A stale VDOM port assignment leaves residual tenant access and operational ownership
  3. Excess controller privileges allow unintended changes to managed switch configurations
  4. A linear FortiLink chain has single-link failure dependencies for devices beyond the break

Explanation

Correct Answer

D:

The problem stems from the fact that a linear FortiLink chain has single-link failure dependencies for devices beyond the break. A correct solution would move to a supported ring or redundant FortiLink topology with verified control-plane continuity and check that a planned ISL failure retains reachability to the remaining managed units.

Incorrect Answers

A:

The offered principle is: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. In the source material it is associated with: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. This case has a different controlling cause: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. Its keyed mechanism is: A linear FortiLink chain has single-link failure dependencies for devices beyond the break.

B:

A stale VDOM port assignment leaves residual tenant access and operational ownership. That is not the mechanism that accounts for the stated failure at the Oakport regional network integrator.

C:

The offered principle is: Excess controller privileges allow unintended changes to managed switch configurations. In the source material it is associated with: Excess controller privileges allow unintended changes to managed switch configurations. This case has a different controlling cause: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. Its keyed mechanism is: A linear FortiLink chain has single-link failure dependencies for devices beyond the break.

Question 403

At the Oakport regional network integrator, a retail complex extends an unprotected chain of switches and a middle-link failure disconnects several downstream sites. What evidence would justify considering this concern addressed?

  1. Either peer can be disabled while the access test remains connected
  2. A test unknown switch stays unauthorized while the approved unit joins successfully
  3. A planned ISL failure retains reachability to the remaining managed units
  4. Two different customer inner tags retain correct service mapping across the trunk

Explanation

Correct Answer

C:

At the Oakport regional network integrator, evidence that a planned ISL failure retains reachability to the remaining managed units directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

Either peer can be disabled while the access test remains connected. That result would test a control for this other failure: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The question instead requires evidence for: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The direct outcome to verify is: A planned ISL failure retains reachability to the remaining managed units.

B:

The offered observation is: A test unknown switch stays unauthorized while the approved unit joins successfully. It would support the separate mechanism: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. In this case the decisive dependency is: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The original keyed verification is: A planned ISL failure retains reachability to the remaining managed units.

D:

The offered observation is: Two different customer inner tags retain correct service mapping across the trunk. It would support the separate mechanism: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. In this case the decisive dependency is: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The original keyed verification is: A planned ISL failure retains reachability to the remaining managed units.

Question 404

At the Oakport regional network integrator, a retail complex extends an unprotected chain of switches and a middle-link failure disconnects several downstream sites. How should the organization sustain the improvement?

  1. Validate port-specific topology constraints before branch construction
  2. Check documented QinQ feature exclusions before new tenant policies
  3. Exercise link-loss scenarios after ring changes
  4. Monitor managed-switch PoE consumption by site

Explanation

Correct Answer

C:

The continuing safeguard is to exercise link-loss scenarios after ring changes. It helps avoid the original condition: a linear FortiLink chain has single-link failure dependencies for devices beyond the break.

Incorrect Answers

A:

The suggested preventive check is: Validate port-specific topology constraints before branch construction. Its technical scope concerns: The documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. This question asks how to sustain control over: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The more targeted safeguard is: Exercise link-loss scenarios after ring changes.

B:

Check documented QinQ feature exclusions before new tenant policies. That safeguard would help prevent recurrence of: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The risk being reviewed here is instead: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The matching ongoing control is: Exercise link-loss scenarios after ring changes.

D:

Monitor managed-switch PoE consumption by site. That safeguard would help prevent recurrence of: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. The risk being reviewed here is instead: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The matching ongoing control is: Exercise link-loss scenarios after ring changes.

Question 405

At the Claremont multisite IT support team, a high availability FortiGate pair fails over but the new primary cannot see its managed switch uplink. Which approach best resolves the described issue?

  1. Follow supported management-port Layer 3 design limits or use an appropriate in-band topology
  2. Bring up and validate the supported upstream FortiLink path before onboarding dependent devices
  3. Wire and configure an HA-compatible FortiLink topology with matching active-controller access
  4. Configure the intended FortiGate interface as a supported FortiLink management connection

Explanation

Correct Answer

C:

This solution addresses the stated limitation: failing over the firewall does not help if the promoted member lacks an operational FortiLink path. Implementing it means the team should wire and configure an HA-compatible FortiLink topology with matching active-controller access, then verify that an HA failover preserves switch authorization and the intended user network.

Incorrect Answers

A:

Follow supported management-port Layer 3 design limits or use an appropriate in-band topology can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to wire and configure an HA-compatible FortiLink topology with matching active-controller access. For the Claremont multisite IT support team, the direct corrective action is to wire and configure an HA-compatible FortiLink topology with matching active-controller access.

B:

The offered action is: Bring up and validate the supported upstream FortiLink path before onboarding dependent devices. It is associated with this separate technical condition: Downstream management discovery depends on operational and permitted upstream switching paths. The actual incident concerns a different dependency: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The corresponding change is: Wire and configure an HA-compatible FortiLink topology with matching active-controller access.

D:

Configure the intended FortiGate interface as a supported FortiLink management connection addresses a different kind of problem: a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. Here the reported weakness is that failing over the firewall does not help if the promoted member lacks an operational FortiLink path. For the Claremont multisite IT support team, the direct corrective action is to wire and configure an HA-compatible FortiLink topology with matching active-controller access.

Question 406

At the Claremont multisite IT support team, a high availability FortiGate pair fails over but the new primary cannot see its managed switch uplink. Which explanation best accounts for the concern?

  1. A simple managed site can be operated without unnecessary high-availability interconnections
  2. Failing over the firewall does not help if the promoted member lacks an operational FortiLink path
  3. Per-device changes can diverge from an approved baseline and complicate mass maintenance
  4. A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy

Explanation

Correct Answer

B:

The problem stems from the fact that failing over the firewall does not help if the promoted member lacks an operational FortiLink path. A correct solution would wire and configure an HA-compatible FortiLink topology with matching active-controller access and check that an HA failover preserves switch authorization and the intended user network.

Incorrect Answers

A:

The offered principle is: A simple managed site can be operated without unnecessary high-availability interconnections. In the source material it is associated with: A simple managed site can be operated without unnecessary high-availability interconnections. This case has a different controlling cause: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. Its keyed mechanism is: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path.

C:

The offered principle is: Per-device changes can diverge from an approved baseline and complicate mass maintenance. In the source material it is associated with: Per-device changes can diverge from an approved baseline and complicate mass maintenance. This case has a different controlling cause: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. Its keyed mechanism is: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path.

D:

A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. That may occur elsewhere, but the evidence at the Claremont multisite IT support team instead points to the fact that failing over the firewall does not help if the promoted member lacks an operational FortiLink path.

Question 407

At the Claremont multisite IT support team, a high availability FortiGate pair fails over but the new primary cannot see its managed switch uplink. Which test result best shows the requirement is met?

  1. Either peer can be disabled while the access test remains connected
  2. An HA failover preserves switch authorization and the intended user network
  3. A controlled endpoint enters the correct tenant native VLAN after CLI configuration
  4. The setting persists after synchronization and a controlled switch restart

Explanation

Correct Answer

B:

This is the relevant acceptance result: an HA failover preserves switch authorization and the intended user network. It demonstrates the outcome of choosing to wire and configure an HA-compatible FortiLink topology with matching active-controller access.

Incorrect Answers

A:

Either peer can be disabled while the access test remains connected. That result would test a control for this other failure: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The question instead requires evidence for: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The direct outcome to verify is: An HA failover preserves switch authorization and the intended user network.

C:

A controlled endpoint enters the correct tenant native VLAN after CLI configuration. That result would test a control for this other failure: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The question instead requires evidence for: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The direct outcome to verify is: An HA failover preserves switch authorization and the intended user network.

D:

At the Claremont multisite IT support team, a result about managed versus standalone mode would not show that the team corrected the failure where failing over the firewall does not help if the promoted member lacks an operational FortiLink path.

Question 408

At the Claremont multisite IT support team, a high availability FortiGate pair fails over but the new primary cannot see its managed switch uplink. Which ongoing control best prevents this issue from recurring?

  1. Include managed switching in FortiGate HA acceptance tests
  2. Review TPID compatibility during carrier handoff changes
  3. Recheck cross-VDOM VLAN settings after firmware upgrades
  4. Audit service and customer tag assignments during onboarding

Explanation

Correct Answer

A:

The continuing safeguard is to include managed switching in FortiGate HA acceptance tests. It helps avoid the original condition: failing over the firewall does not help if the promoted member lacks an operational FortiLink path.

Incorrect Answers

B:

Review TPID compatibility during carrier handoff changes. That safeguard would help prevent recurrence of: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The risk being reviewed here is instead: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The matching ongoing control is: Include managed switching in FortiGate HA acceptance tests.

C:

Recheck cross-VDOM VLAN settings after firmware upgrades is not the primary recurring safeguard for this problem. The team should include managed switching in FortiGate HA acceptance tests. For the Claremont multisite IT support team, the direct corrective action is to wire and configure an HA-compatible FortiLink topology with matching active-controller access.

D:

Audit service and customer tag assignments during onboarding. That safeguard would help prevent recurrence of: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The risk being reviewed here is instead: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The matching ongoing control is: Include managed switching in FortiGate HA acceptance tests.

Question 409

At the Redhaven campus infrastructure group, an access switch has uplinks to two FortiSwitch distribution peers but the peers lack an approved MCLAG configuration. Which implementation choice best addresses the situation?

  1. Use supported FortiLink point-to-point Layer 2 bridging and appropriate discovery handling
  2. Validate FortiGate VDOM policy and routing isolation for each tenant VLAN path
  3. Deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks
  4. Use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks. The observed risk is that two physical uplinks to independent peers are not a coordinated aggregate by default; a passing acceptance check would show that a peer failure preserves supported downstream forwarding without a Layer 2 loop.

Incorrect Answers

A:

This alternative would be suitable where some intermediate Layer 2 devices do not transport standard neighbor discovery frames. It does not by itself resolve the need to deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks. For the Redhaven campus infrastructure group, the direct corrective action is to deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks.

B:

Validate FortiGate VDOM policy and routing isolation for each tenant VLAN path addresses a different kind of problem: separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. Here the reported weakness is that two physical uplinks to independent peers are not a coordinated aggregate by default. For the Redhaven campus infrastructure group, the direct corrective action is to deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks.

D:

The offered alternative is: Use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership. It addresses this separate failure mode: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. In the current case, the observed mechanism is: Two physical uplinks to independent peers are not a coordinated aggregate by default. The keyed action, Deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks., targets that condition more directly.

Question 410

At the Redhaven campus infrastructure group, an access switch has uplinks to two FortiSwitch distribution peers but the peers lack an approved MCLAG configuration. What risk should the team identify as the primary issue?

  1. Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink
  2. Two physical uplinks to independent peers are not a coordinated aggregate by default
  3. The documented shared FortiSwitch port feature set does not include DHCP snooping
  4. Unreviewed automatic authorization can admit a connected switch before identity and installation are checked

Explanation

Correct Answer

B:

This identifies the root issue: two physical uplinks to independent peers are not a coordinated aggregate by default. At the Redhaven campus infrastructure group, the team should therefore deploy supported MCLAG peer and inter-chassis design before activating parallel uplinks.

Incorrect Answers

A:

The offered action is: Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. It is associated with this separate technical condition: Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. The actual incident concerns a different dependency: Two physical uplinks to independent peers are not a coordinated aggregate by default. The corresponding change is: Two physical uplinks to independent peers are not a coordinated aggregate by default.

C:

The offered alternative is: The documented shared FortiSwitch port feature set does not include DHCP snooping. It addresses this separate failure mode: The documented shared FortiSwitch port feature set does not include DHCP snooping. In the current case, the observed mechanism is: Two physical uplinks to independent peers are not a coordinated aggregate by default. The keyed action, Two physical uplinks to independent peers are not a coordinated aggregate by default., targets that condition more directly.

D:

Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. That is not the mechanism that accounts for the stated failure at the Redhaven campus infrastructure group.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests