McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 40

Question 390

At the Zincbridge managed-network provider, operators expose switch HTTPS and SSH management directly to guest networks for convenience. Which underlying issue most directly explains this situation?

  1. A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery
  2. Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration
  3. Open management access from untrusted segments broadens credential attack surface
  4. Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation

Explanation

Correct Answer

C:

The strongest explanation is that open management access from untrusted segments broadens credential attack surface. This accounts for the outcome and supports the action to restrict supported administrative services to the approved management path and accounts.

Incorrect Answers

A:

The offered principle is: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. In the source material it is associated with: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. This case has a different controlling cause: Open management access from untrusted segments broadens credential attack surface. Its keyed mechanism is: Open management access from untrusted segments broadens credential attack surface.

B:

Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. That is not the mechanism that accounts for the stated failure at the Zincbridge managed-network provider.

D:

Although mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation, the presented symptoms do not support that as the primary cause; they indicate that open management access from untrusted segments broadens credential attack surface. For the Zincbridge managed-network provider, the direct corrective action is to restrict supported administrative services to the approved management path and accounts.

Question 391

At the Zincbridge managed-network provider, operators expose switch HTTPS and SSH management directly to guest networks for convenience. What evidence would justify considering this concern addressed?

  1. Guest access is blocked while an authorized administrator can manage the switch
  2. The switch clock matches the trusted reference and logs align with FortiGate events
  3. A lab review shows enforcement without assuming unsupported snooping on that shared port
  4. All island members report the same intended FortiGate controller identity

Explanation

Correct Answer

A:

This tests the real business behavior: guest access is blocked while an authorized administrator can manage the switch. It specifically checks whether the risk that open management access from untrusted segments broadens credential attack surface has been reduced.

Incorrect Answers

B:

The offered observation is: The switch clock matches the trusted reference and logs align with FortiGate events. It would support the separate mechanism: Unsynchronized switch clocks make event correlation and certificate validation unreliable. In this case the decisive dependency is: Open management access from untrusted segments broadens credential attack surface. The original keyed verification is: Guest access is blocked while an authorized administrator can manage the switch.

C:

A lab review shows enforcement without assuming unsupported snooping on that shared port. That result would test a control for this other failure: The documented shared FortiSwitch port feature set does not include DHCP snooping. The question instead requires evidence for: Open management access from untrusted segments broadens credential attack surface. The direct outcome to verify is: Guest access is blocked while an authorized administrator can manage the switch.

D:

The offered observation is: All island members report the same intended FortiGate controller identity. It would support the separate mechanism: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. In this case the decisive dependency is: Open management access from untrusted segments broadens credential attack surface. The original keyed verification is: Guest access is blocked while an authorized administrator can manage the switch.

Question 392

At the Zincbridge managed-network provider, operators expose switch HTTPS and SSH management directly to guest networks for convenience. How should the organization sustain the improvement?

  1. Audit the management mode before every switch change
  2. Review L3 FortiLink limitations before adding islands
  3. Audit routed management changes for unauthorized NAT
  4. Audit administration protocols and source restrictions routinely

Explanation

Correct Answer

D:

The needed prevention is to audit administration protocols and source restrictions routinely. It directly sustains the original change to restrict supported administrative services to the approved management path and accounts.

Incorrect Answers

A:

The suggested preventive check is: Audit the management mode before every switch change. Its technical scope concerns: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. This question asks how to sustain control over: Open management access from untrusted segments broadens credential attack surface. The more targeted safeguard is: Audit administration protocols and source restrictions routinely.

B:

Review L3 FortiLink limitations before adding islands. That safeguard would help prevent recurrence of: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. The risk being reviewed here is instead: Open management access from untrusted segments broadens credential attack surface. The matching ongoing control is: Audit administration protocols and source restrictions routinely.

C:

That routine supports fortilink l3 nat unsupported, but the relevant ongoing risk requires the team to audit administration protocols and source restrictions routinely. For the Zincbridge managed-network provider, the direct corrective action is to restrict supported administrative services to the approved management path and accounts.

Question 393

At the Pinewick branch IT department, multiple newly connected FortiSwitch units fail management setup because FortiLink IP assignment has insufficient capacity. Which approach best resolves the described issue?

  1. Make persistent managed-switch configuration through the owning FortiGate switch controller instead of local CLI
  2. Revoke the port export and safely reassign it only after wiping tenant access policy
  3. Validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints
  4. Resize and validate the supported FortiLink management address pool or topology addressing plan

Explanation

Correct Answer

D:

Resize and validate the supported FortiLink management address pool or topology addressing plan is the best response because switch discovery and controller communication require nonconflicting usable management addresses. A focused validation would establish that each authorized switch obtains a distinct working management address and stays connected.

Incorrect Answers

A:

Make persistent managed-switch configuration through the owning FortiGate switch controller instead of local CLI can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to resize and validate the supported FortiLink management address pool or topology addressing plan. For the Pinewick branch IT department, the direct corrective action is to resize and validate the supported FortiLink management address pool or topology addressing plan.

B:

The offered action is: Revoke the port export and safely reassign it only after wiping tenant access policy. It is associated with this separate technical condition: A stale VDOM port assignment leaves residual tenant access and operational ownership. The actual incident concerns a different dependency: Switch discovery and controller communication require nonconflicting usable management addresses. The corresponding change is: Resize and validate the supported FortiLink management address pool or topology addressing plan.

C:

This alternative would be suitable where overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. It does not by itself resolve the need to resize and validate the supported FortiLink management address pool or topology addressing plan. For the Pinewick branch IT department, the direct corrective action is to resize and validate the supported FortiLink management address pool or topology addressing plan.

Question 394

At the Pinewick branch IT department, multiple newly connected FortiSwitch units fail management setup because FortiLink IP assignment has insufficient capacity. Which explanation best accounts for the concern?

  1. A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller
  2. Multi-VDOM shared ports expose a defined subset of switch security capabilities
  3. FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path
  4. Switch discovery and controller communication require nonconflicting usable management addresses

Explanation

Correct Answer

D:

This identifies the root issue: switch discovery and controller communication require nonconflicting usable management addresses. At the Pinewick branch IT department, the team should therefore resize and validate the supported FortiLink management address pool or topology addressing plan.

Incorrect Answers

A:

The offered principle is: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. In the source material it is associated with: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. This case has a different controlling cause: Switch discovery and controller communication require nonconflicting usable management addresses. Its keyed mechanism is: Switch discovery and controller communication require nonconflicting usable management addresses.

B:

Although multi-VDOM shared ports expose a defined subset of switch security capabilities, the presented symptoms do not support that as the primary cause; they indicate that switch discovery and controller communication require nonconflicting usable management addresses. For the Pinewick branch IT department, the direct corrective action is to resize and validate the supported FortiLink management address pool or topology addressing plan.

C:

The offered principle is: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. In the source material it is associated with: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. This case has a different controlling cause: Switch discovery and controller communication require nonconflicting usable management addresses. Its keyed mechanism is: Switch discovery and controller communication require nonconflicting usable management addresses.

Question 395

At the Pinewick branch IT department, multiple newly connected FortiSwitch units fail management setup because FortiLink IP assignment has insufficient capacity. Which test result best shows the requirement is met?

  1. A monitor-only account can view status but cannot change port VLANs
  2. The island discovers its FortiGate over a correctly routed unNATed path
  3. Each authorized switch obtains a distinct working management address and stays connected
  4. Two tenants carry the same inner VLAN ID without exchanging frames

Explanation

Correct Answer

C:

Because switch discovery and controller communication require nonconflicting usable management addresses, the required evidence must show that each authorized switch obtains a distinct working management address and stays connected. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

A monitor-only account can view status but cannot change port VLANs. That result would test a control for this other failure: Excess controller privileges allow unintended changes to managed switch configurations. The question instead requires evidence for: Switch discovery and controller communication require nonconflicting usable management addresses. The direct outcome to verify is: Each authorized switch obtains a distinct working management address and stays connected.

B:

The offered observation is: The island discovers its FortiGate over a correctly routed unNATed path. It would support the separate mechanism: NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management. In this case the decisive dependency is: Switch discovery and controller communication require nonconflicting usable management addresses. The original keyed verification is: Each authorized switch obtains a distinct working management address and stays connected.

D:

At the Pinewick branch IT department, a result about vdom qinq outer vlan would not show that the team corrected the failure where switch discovery and controller communication require nonconflicting usable management addresses.

Question 396

At the Pinewick branch IT department, multiple newly connected FortiSwitch units fail management setup because FortiLink IP assignment has insufficient capacity. Which ongoing control best prevents this issue from recurring?

  1. Forecast FortiLink address capacity before fleet expansion
  2. Monitor time sync status after management network changes
  3. Audit pool requests and approved port allocations
  4. Review tenant device forecasts before increasing limits

Explanation

Correct Answer

A:

The continuing safeguard is to forecast FortiLink address capacity before fleet expansion. It helps avoid the original condition: switch discovery and controller communication require nonconflicting usable management addresses.

Incorrect Answers

B:

Monitor time sync status after management network changes. That safeguard would help prevent recurrence of: Unsynchronized switch clocks make event correlation and certificate validation unreliable. The risk being reviewed here is instead: Switch discovery and controller communication require nonconflicting usable management addresses. The matching ongoing control is: Forecast FortiLink address capacity before fleet expansion.

C:

Audit pool requests and approved port allocations is not the primary recurring safeguard for this problem. The team should forecast FortiLink address capacity before fleet expansion. For the Pinewick branch IT department, the direct corrective action is to resize and validate the supported FortiLink management address pool or topology addressing plan.

D:

Review tenant device forecasts before increasing limits. That safeguard would help prevent recurrence of: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The risk being reviewed here is instead: Switch discovery and controller communication require nonconflicting usable management addresses. The matching ongoing control is: Forecast FortiLink address capacity before fleet expansion.

Question 397

At the Birchhaven data network services firm, a small office introduces a managed FortiSwitch but installs redundant layers and a second controller without a business requirement. Which implementation choice best addresses the situation?

  1. Use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role
  2. Rework the LAG to the supported single intermediary or supported alternative topology
  3. Configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port
  4. Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch

Explanation

Correct Answer

A:

This solution addresses the stated limitation: a simple managed site can be operated without unnecessary high-availability interconnections. Implementing it means the team should use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role, then verify that the switch discovers under the intended FortiGate and forwards allowed VLAN traffic.

Incorrect Answers

B:

Rework the LAG to the supported single intermediary or supported alternative topology addresses a different kind of problem: the documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. Here the reported weakness is that a simple managed site can be operated without unnecessary high-availability interconnections. For the Birchhaven data network services firm, the direct corrective action is to use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role.

C:

The option addresses the separate situation where physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. For this case, the more appropriate response is to use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role. For the Birchhaven data network services firm, the direct corrective action is to use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role.

D:

The offered alternative is: Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch. It addresses this separate failure mode: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. In the current case, the observed mechanism is: A simple managed site can be operated without unnecessary high-availability interconnections. The keyed action, Use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role., targets that condition more directly.

Question 398

At the Birchhaven data network services firm, a small office introduces a managed FortiSwitch but installs redundant layers and a second controller without a business requirement. What risk should the team identify as the primary issue?

  1. FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path
  2. A stale VDOM port assignment leaves residual tenant access and operational ownership
  3. Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation
  4. A simple managed site can be operated without unnecessary high-availability interconnections

Explanation

Correct Answer

D:

The architectural weakness is that a simple managed site can be operated without unnecessary high-availability interconnections. It can be addressed through the controlled change to use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role.

Incorrect Answers

A:

The offered action is: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. It is associated with this separate technical condition: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. The actual incident concerns a different dependency: A simple managed site can be operated without unnecessary high-availability interconnections. The corresponding change is: A simple managed site can be operated without unnecessary high-availability interconnections.

B:

A stale VDOM port assignment leaves residual tenant access and operational ownership. That may occur elsewhere, but the evidence at the Birchhaven data network services firm instead points to the fact that a simple managed site can be operated without unnecessary high-availability interconnections.

C:

The offered alternative is: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. It addresses this separate failure mode: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. In the current case, the observed mechanism is: A simple managed site can be operated without unnecessary high-availability interconnections. The keyed action, A simple managed site can be operated without unnecessary high-availability interconnections., targets that condition more directly.

Question 399

At the Birchhaven data network services firm, a small office introduces a managed FortiSwitch but installs redundant layers and a second controller without a business requirement. What is the strongest acceptance test for this change?

  1. Both devices discover and exchange approved management and data through the bridge
  2. Two pilot switches apply the same approved baseline while retaining permitted exceptions
  3. The switch discovers under the intended FortiGate and forwards allowed VLAN traffic
  4. An authorized manager logs in over the approved path and guest access fails

Explanation

Correct Answer

C:

This tests the real business behavior: the switch discovers under the intended FortiGate and forwards allowed VLAN traffic. It specifically checks whether the risk that a simple managed site can be operated without unnecessary high-availability interconnections has been reduced.

Incorrect Answers

A:

Both devices discover and exchange approved management and data through the bridge. That result would test a control for this other failure: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. The question instead requires evidence for: A simple managed site can be operated without unnecessary high-availability interconnections. The direct outcome to verify is: The switch discovers under the intended FortiGate and forwards allowed VLAN traffic.

B:

At the Birchhaven data network services firm, a result about controller switch profile inheritance would not show that the team corrected the failure where a simple managed site can be operated without unnecessary high-availability interconnections.

D:

The offered observation is: An authorized manager logs in over the approved path and guest access fails. It would support the separate mechanism: Management-plane routing and access controls are separate from user data forwarding. In this case the decisive dependency is: A simple managed site can be operated without unnecessary high-availability interconnections. The original keyed verification is: The switch discovers under the intended FortiGate and forwards allowed VLAN traffic.

Question 400

At the Birchhaven data network services firm, a small office introduces a managed FortiSwitch but installs redundant layers and a second controller without a business requirement. Which setting or practice should be reviewed in future?

  1. Validate port-specific topology constraints before branch construction
  2. Review FortiGate administrator roles each quarter
  3. Review QoS model support for pooled tenant ports
  4. Reassess topology only when availability requirements grow

Explanation

Correct Answer

D:

For the Birchhaven data network services firm, this maintenance action preserves the fix: reassess topology only when availability requirements grow. It should be revisited as the workload evolves.

Incorrect Answers

A:

Validate port-specific topology constraints before branch construction is not the primary recurring safeguard for this problem. The team should reassess topology only when availability requirements grow. For the Birchhaven data network services firm, the direct corrective action is to use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role.

B:

Review FortiGate administrator roles each quarter. That safeguard would help prevent recurrence of: Excess controller privileges allow unintended changes to managed switch configurations. The risk being reviewed here is instead: A simple managed site can be operated without unnecessary high-availability interconnections. The matching ongoing control is: Reassess topology only when availability requirements grow.

C:

The suggested preventive check is: Review QoS model support for pooled tenant ports. Its technical scope concerns: Not all advanced switch features are available on shared tenant ports. This question asks how to sustain control over: A simple managed site can be operated without unnecessary high-availability interconnections. The more targeted safeguard is: Reassess topology only when availability requirements grow.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests