McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 38

Question 370

At the Jasperfield data network services firm, helpdesk staff receive full switch-controller rights despite needing only monitoring access. Which explanation best accounts for the concern?

  1. Managed-switch configuration is associated with device identity and may not migrate automatically to a new serial
  2. A stale VDOM port assignment leaves residual tenant access and operational ownership
  3. Excess controller privileges allow unintended changes to managed switch configurations
  4. FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path

Explanation

Correct Answer

C:

The situation shows that excess controller privileges allow unintended changes to managed switch configurations, rather than merely a monitoring or presentation issue. Remediation is to create FortiGate administrative access profiles restricting switch operations to required responsibilities.

Incorrect Answers

A:

The offered principle is: Managed-switch configuration is associated with device identity and may not migrate automatically to a new serial. In the source material it is associated with: Managed-switch configuration is associated with device identity and may not migrate automatically to a new serial. This case has a different controlling cause: Excess controller privileges allow unintended changes to managed switch configurations. Its keyed mechanism is: Excess controller privileges allow unintended changes to managed switch configurations.

B:

Although a stale VDOM port assignment leaves residual tenant access and operational ownership, the presented symptoms do not support that as the primary cause; they indicate that excess controller privileges allow unintended changes to managed switch configurations. For the Jasperfield data network services firm, the direct corrective action is to create FortiGate administrative access profiles restricting switch operations to required responsibilities.

D:

FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. That may occur elsewhere, but the evidence at the Jasperfield data network services firm instead points to the fact that excess controller privileges allow unintended changes to managed switch configurations.

Question 371

At the Jasperfield data network services firm, helpdesk staff receive full switch-controller rights despite needing only monitoring access. Which test result best shows the requirement is met?

  1. A monitor-only account can view status but cannot change port VLANs
  2. An authorized manager logs in over the approved path and guest access fails
  3. A test tenant authentication policy works without enabling unsupported port features
  4. Each tenant administrator sees and configures only ports assigned to its VDOM

Explanation

Correct Answer

A:

At the Jasperfield data network services firm, evidence that a monitor-only account can view status but cannot change port VLANs directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: An authorized manager logs in over the approved path and guest access fails. It would support the separate mechanism: Management-plane routing and access controls are separate from user data forwarding. In this case the decisive dependency is: Excess controller privileges allow unintended changes to managed switch configurations. The original keyed verification is: A monitor-only account can view status but cannot change port VLANs.

C:

A test tenant authentication policy works without enabling unsupported port features. That result would test a control for this other failure: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The question instead requires evidence for: Excess controller privileges allow unintended changes to managed switch configurations. The direct outcome to verify is: A monitor-only account can view status but cannot change port VLANs.

D:

At the Jasperfield data network services firm, a result about tenant port export would not show that the team corrected the failure where excess controller privileges allow unintended changes to managed switch configurations.

Question 372

At the Jasperfield data network services firm, helpdesk staff receive full switch-controller rights despite needing only monitoring access. Which ongoing control best prevents this issue from recurring?

  1. Synchronize switch port inventory after moves
  2. Review FortiGate administrator roles each quarter
  3. Monitor MCLAG peer and member health
  4. Reconcile port export records during offboarding

Explanation

Correct Answer

B:

The needed prevention is to review FortiGate administrator roles each quarter. It directly sustains the original change to create FortiGate administrative access profiles restricting switch operations to required responsibilities.

Incorrect Answers

A:

That routine supports fortiswitch port inventory labels, but the relevant ongoing risk requires the team to review FortiGate administrator roles each quarter. For the Jasperfield data network services firm, the direct corrective action is to create FortiGate administrative access profiles restricting switch operations to required responsibilities.

C:

Monitor MCLAG peer and member health is not the primary recurring safeguard for this problem. The team should review FortiGate administrator roles each quarter. For the Jasperfield data network services firm, the direct corrective action is to create FortiGate administrative access profiles restricting switch operations to required responsibilities.

D:

Reconcile port export records during offboarding. That safeguard would help prevent recurrence of: A stale VDOM port assignment leaves residual tenant access and operational ownership. The risk being reviewed here is instead: Excess controller privileges allow unintended changes to managed switch configurations. The matching ongoing control is: Review FortiGate administrator roles each quarter.

Question 373

At the Westhaven switching consultancy, a site operator cannot map physical switch ports to rooms because controller inventory has outdated descriptions. Which implementation choice best addresses the situation?

  1. Use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates
  2. Update managed-switch port descriptions and verify them against cabling records
  3. Use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership
  4. Revoke the port export and safely reassign it only after wiping tenant access policy

Explanation

Correct Answer

B:

Update managed-switch port descriptions and verify them against cabling records is the best response because missing port identity makes correct endpoint provisioning and incident isolation harder. A focused validation would establish that a cable tracing test matches the controller port description with the physical outlet.

Incorrect Answers

A:

This alternative would be suitable where manual per-device setup increases configuration drift and delays consistent provisioning. It does not by itself resolve the need to update managed-switch port descriptions and verify them against cabling records. For the Westhaven switching consultancy, the direct corrective action is to update managed-switch port descriptions and verify them against cabling records.

C:

The option addresses the separate situation where the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. For this case, the more appropriate response is to update managed-switch port descriptions and verify them against cabling records. For the Westhaven switching consultancy, the direct corrective action is to update managed-switch port descriptions and verify them against cabling records.

D:

The offered alternative is: Revoke the port export and safely reassign it only after wiping tenant access policy. It addresses this separate failure mode: A stale VDOM port assignment leaves residual tenant access and operational ownership. In the current case, the observed mechanism is: Missing port identity makes correct endpoint provisioning and incident isolation harder. The keyed action, Update managed-switch port descriptions and verify them against cabling records., targets that condition more directly.

Question 374

At the Westhaven switching consultancy, a site operator cannot map physical switch ports to rooms because controller inventory has outdated descriptions. What risk should the team identify as the primary issue?

  1. Downstream management discovery depends on operational and permitted upstream switching paths
  2. Second-tier management depends on the operational first-tier inter-switch path
  3. Two physical uplinks to independent peers are not a coordinated aggregate by default
  4. Missing port identity makes correct endpoint provisioning and incident isolation harder

Explanation

Correct Answer

D:

The architectural weakness is that missing port identity makes correct endpoint provisioning and incident isolation harder. It can be addressed through the controlled change to update managed-switch port descriptions and verify them against cabling records.

Incorrect Answers

A:

The offered action is: Downstream management discovery depends on operational and permitted upstream switching paths. It is associated with this separate technical condition: Downstream management discovery depends on operational and permitted upstream switching paths. The actual incident concerns a different dependency: Missing port identity makes correct endpoint provisioning and incident isolation harder. The corresponding change is: Missing port identity makes correct endpoint provisioning and incident isolation harder.

B:

Second-tier management depends on the operational first-tier inter-switch path. That may occur elsewhere, but the evidence at the Westhaven switching consultancy instead points to the fact that missing port identity makes correct endpoint provisioning and incident isolation harder.

C:

The offered alternative is: Two physical uplinks to independent peers are not a coordinated aggregate by default. It addresses this separate failure mode: Two physical uplinks to independent peers are not a coordinated aggregate by default. In the current case, the observed mechanism is: Missing port identity makes correct endpoint provisioning and incident isolation harder. The keyed action, Missing port identity makes correct endpoint provisioning and incident isolation harder., targets that condition more directly.

Question 375

At the Westhaven switching consultancy, a site operator cannot map physical switch ports to rooms because controller inventory has outdated descriptions. What is the strongest acceptance test for this change?

  1. A monitor-only account can view status but cannot change port VLANs
  2. A cable tracing test matches the controller port description with the physical outlet
  3. Both tenants' critical endpoints remain powered in the approved full-load test
  4. A controlled primary-link outage moves operations to the standby link

Explanation

Correct Answer

B:

The team can confirm the fix by showing that a cable tracing test matches the controller port description with the physical outlet. This aligns with the corrective design to update managed-switch port descriptions and verify them against cabling records.

Incorrect Answers

A:

A monitor-only account can view status but cannot change port VLANs. That result would test a control for this other failure: Excess controller privileges allow unintended changes to managed switch configurations. The question instead requires evidence for: Missing port identity makes correct endpoint provisioning and incident isolation harder. The direct outcome to verify is: A cable tracing test matches the controller port description with the physical outlet.

C:

Both tenants' critical endpoints remain powered in the approved full-load test. That result would test a control for this other failure: Virtual tenant separation does not create independent physical power supplies. The question instead requires evidence for: Missing port identity makes correct endpoint provisioning and incident isolation harder. The direct outcome to verify is: A cable tracing test matches the controller port description with the physical outlet.

D:

The offered observation is: A controlled primary-link outage moves operations to the standby link. It would support the separate mechanism: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. In this case the decisive dependency is: Missing port identity makes correct endpoint provisioning and incident isolation harder. The original keyed verification is: A cable tracing test matches the controller port description with the physical outlet.

Question 376

At the Westhaven switching consultancy, a site operator cannot map physical switch ports to rooms because controller inventory has outdated descriptions. Which setting or practice should be reviewed in future?

  1. Synchronize switch port inventory after moves
  2. Review FortiLink interface assignment after firewall port migrations
  3. Review tenant device forecasts before increasing limits
  4. Document root and tenant responsibilities for VLAN changes

Explanation

Correct Answer

A:

After implementation, the team should synchronize switch port inventory after moves as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Review FortiLink interface assignment after firewall port migrations. That safeguard would help prevent recurrence of: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The risk being reviewed here is instead: Missing port identity makes correct endpoint provisioning and incident isolation harder. The matching ongoing control is: Synchronize switch port inventory after moves.

C:

The suggested preventive check is: Review tenant device forecasts before increasing limits. Its technical scope concerns: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. This question asks how to sustain control over: Missing port identity makes correct endpoint provisioning and incident isolation harder. The more targeted safeguard is: Synchronize switch port inventory after moves.

D:

Document root and tenant responsibilities for VLAN changes. That safeguard would help prevent recurrence of: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The risk being reviewed here is instead: Missing port identity makes correct endpoint provisioning and incident isolation harder. The matching ongoing control is: Synchronize switch port inventory after moves.

Question 377

At the Marshport infrastructure service operator, a large switch fleet receives different security and access settings because each unit is configured manually. Which corrective action best meets the requirement?

  1. Create FortiGate administrative access profiles restricting switch operations to required responsibilities
  2. Have the tenant request the approved port from the supported FortiSwitch virtual port pool
  3. Use supported managed-switch templates or controller policy objects for compatible site groups
  4. Apply only supported port-security policies and document unsupported controls for the selected model

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should use supported managed-switch templates or controller policy objects for compatible site groups because per-device changes can diverge from an approved baseline and complicate mass maintenance. A suitable test confirms that two pilot switches apply the same approved baseline while retaining permitted exceptions.

Incorrect Answers

A:

The option addresses the separate situation where excess controller privileges allow unintended changes to managed switch configurations. For this case, the more appropriate response is to use supported managed-switch templates or controller policy objects for compatible site groups. For the Marshport infrastructure service operator, the direct corrective action is to use supported managed-switch templates or controller policy objects for compatible site groups.

B:

The offered action is: Have the tenant request the approved port from the supported FortiSwitch virtual port pool. It is associated with this separate technical condition: A port exported to a pool may need a tenant claim step before use. The actual incident concerns a different dependency: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The corresponding change is: Use supported managed-switch templates or controller policy objects for compatible site groups.

D:

The offered alternative is: Apply only supported port-security policies and document unsupported controls for the selected model. It addresses this separate failure mode: Multi-VDOM shared ports expose a defined subset of switch security capabilities. In the current case, the observed mechanism is: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The keyed action, Use supported managed-switch templates or controller policy objects for compatible site groups., targets that condition more directly.

Question 378

At the Marshport infrastructure service operator, a large switch fleet receives different security and access settings because each unit is configured manually. Which underlying issue most directly explains this situation?

  1. Downstream management discovery depends on operational and permitted upstream switching paths
  2. Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration
  3. An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary
  4. Per-device changes can diverge from an approved baseline and complicate mass maintenance

Explanation

Correct Answer

D:

The problem stems from the fact that per-device changes can diverge from an approved baseline and complicate mass maintenance. A correct solution would use supported managed-switch templates or controller policy objects for compatible site groups and check that two pilot switches apply the same approved baseline while retaining permitted exceptions.

Incorrect Answers

A:

The offered principle is: Downstream management discovery depends on operational and permitted upstream switching paths. In the source material it is associated with: Downstream management discovery depends on operational and permitted upstream switching paths. This case has a different controlling cause: Per-device changes can diverge from an approved baseline and complicate mass maintenance. Its keyed mechanism is: Per-device changes can diverge from an approved baseline and complicate mass maintenance.

B:

Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. That is not the mechanism that accounts for the stated failure at the Marshport infrastructure service operator.

C:

The offered principle is: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. In the source material it is associated with: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. This case has a different controlling cause: Per-device changes can diverge from an approved baseline and complicate mass maintenance. Its keyed mechanism is: Per-device changes can diverge from an approved baseline and complicate mass maintenance.

Question 379

At the Marshport infrastructure service operator, a large switch fleet receives different security and access settings because each unit is configured manually. What evidence would justify considering this concern addressed?

  1. An approved factory-reset switch receives the correct managed inventory and site policy
  2. Each tenant administrator sees and configures only ports assigned to its VDOM
  3. The island discovers its FortiGate over a correctly routed unNATed path
  4. Two pilot switches apply the same approved baseline while retaining permitted exceptions

Explanation

Correct Answer

D:

This is the relevant acceptance result: two pilot switches apply the same approved baseline while retaining permitted exceptions. It demonstrates the outcome of choosing to use supported managed-switch templates or controller policy objects for compatible site groups.

Incorrect Answers

A:

An approved factory-reset switch receives the correct managed inventory and site policy. That result would test a control for this other failure: Manual per-device setup increases configuration drift and delays consistent provisioning. The question instead requires evidence for: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The direct outcome to verify is: Two pilot switches apply the same approved baseline while retaining permitted exceptions.

B:

The offered observation is: Each tenant administrator sees and configures only ports assigned to its VDOM. It would support the separate mechanism: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. In this case the decisive dependency is: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The original keyed verification is: Two pilot switches apply the same approved baseline while retaining permitted exceptions.

C:

The island discovers its FortiGate over a correctly routed unNATed path. That result would test a control for this other failure: NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management. The question instead requires evidence for: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The direct outcome to verify is: Two pilot switches apply the same approved baseline while retaining permitted exceptions.

Question 380

At the Marshport infrastructure service operator, a large switch fleet receives different security and access settings because each unit is configured manually. How should the organization sustain the improvement?

  1. Monitor managed-switch PoE consumption by site
  2. Document every downstream dependency when replacing an upstream switch
  3. Audit template drift during firmware and topology changes
  4. Exercise link-loss scenarios after ring changes

Explanation

Correct Answer

C:

The continuing safeguard is to audit template drift during firmware and topology changes. It helps avoid the original condition: per-device changes can diverge from an approved baseline and complicate mass maintenance.

Incorrect Answers

A:

The suggested preventive check is: Monitor managed-switch PoE consumption by site. Its technical scope concerns: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. This question asks how to sustain control over: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The more targeted safeguard is: Audit template drift during firmware and topology changes.

B:

Document every downstream dependency when replacing an upstream switch. That safeguard would help prevent recurrence of: Second-tier management depends on the operational first-tier inter-switch path. The risk being reviewed here is instead: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The matching ongoing control is: Audit template drift during firmware and topology changes.

D:

Exercise link-loss scenarios after ring changes. That safeguard would help prevent recurrence of: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The risk being reviewed here is instead: Per-device changes can diverge from an approved baseline and complicate mass maintenance. The matching ongoing control is: Audit template drift during firmware and topology changes.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests