McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 36

Question 350

At the Umberfield infrastructure service operator, a fleet manager upgrades FortiOS but neglects FortiSwitchOS compatibility and causes managed-switch instability. What risk should the team identify as the primary issue?

  1. Missing port identity makes correct endpoint provisioning and incident isolation harder
  2. Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more
  3. Two physical uplinks to independent peers are not a coordinated aggregate by default
  4. Firmware version mismatches can break expected FortiLink and feature operation

Explanation

Correct Answer

D:

The architectural weakness is that firmware version mismatches can break expected FortiLink and feature operation. It can be addressed through the controlled change to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller.

Incorrect Answers

A:

The offered action is: Missing port identity makes correct endpoint provisioning and incident isolation harder. It is associated with this separate technical condition: Missing port identity makes correct endpoint provisioning and incident isolation harder. The actual incident concerns a different dependency: Firmware version mismatches can break expected FortiLink and feature operation. The corresponding change is: Firmware version mismatches can break expected FortiLink and feature operation.

B:

Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. That may occur elsewhere, but the evidence at the Umberfield infrastructure service operator instead points to the fact that firmware version mismatches can break expected FortiLink and feature operation.

C:

The offered alternative is: Two physical uplinks to independent peers are not a coordinated aggregate by default. It addresses this separate failure mode: Two physical uplinks to independent peers are not a coordinated aggregate by default. In the current case, the observed mechanism is: Firmware version mismatches can break expected FortiLink and feature operation. The keyed action, Firmware version mismatches can break expected FortiLink and feature operation., targets that condition more directly.

Question 351

At the Umberfield infrastructure service operator, a fleet manager upgrades FortiOS but neglects FortiSwitchOS compatibility and causes managed-switch instability. What is the strongest acceptance test for this change?

  1. The setting persists after synchronization and a controlled switch restart
  2. A lab review shows enforcement without assuming unsupported snooping on that shared port
  3. A test tenant authentication policy works without enabling unsupported port features
  4. A pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade

Explanation

Correct Answer

D:

The intended correction is to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller. The decisive verification is that a pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade, rather than only confirming configuration was saved.

Incorrect Answers

A:

The setting persists after synchronization and a controlled switch restart. That result would test a control for this other failure: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. The question instead requires evidence for: Firmware version mismatches can break expected FortiLink and feature operation. The direct outcome to verify is: A pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade.

B:

At the Umberfield infrastructure service operator, a result about shared port dhcp snooping caveat would not show that the team corrected the failure where firmware version mismatches can break expected FortiLink and feature operation.

C:

A test tenant authentication policy works without enabling unsupported port features. That result would test a control for this other failure: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The question instead requires evidence for: Firmware version mismatches can break expected FortiLink and feature operation. The direct outcome to verify is: A pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade.

Question 352

At the Umberfield infrastructure service operator, a fleet manager upgrades FortiOS but neglects FortiSwitchOS compatibility and causes managed-switch instability. Which setting or practice should be reviewed in future?

  1. Synchronize switch port inventory after moves
  2. Audit VLAN references and port exports after VDOM restructuring
  3. Maintain a tested FortiOS and FortiSwitchOS version matrix
  4. Review inner and outer tag maps during tenant expansion

Explanation

Correct Answer

C:

The team should maintain a tested FortiOS and FortiSwitchOS version matrix. That recurring practice targets the same weakness, namely that firmware version mismatches can break expected FortiLink and feature operation.

Incorrect Answers

A:

Synchronize switch port inventory after moves is not the primary recurring safeguard for this problem. The team should maintain a tested FortiOS and FortiSwitchOS version matrix. For the Umberfield infrastructure service operator, the direct corrective action is to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller.

B:

Audit VLAN references and port exports after VDOM restructuring. That safeguard would help prevent recurrence of: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. The risk being reviewed here is instead: Firmware version mismatches can break expected FortiLink and feature operation. The matching ongoing control is: Maintain a tested FortiOS and FortiSwitchOS version matrix.

D:

Review inner and outer tag maps during tenant expansion. That safeguard would help prevent recurrence of: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The risk being reviewed here is instead: Firmware version mismatches can break expected FortiLink and feature operation. The matching ongoing control is: Maintain a tested FortiOS and FortiSwitchOS version matrix.

Question 353

At the Glenbrook enterprise network team, a standalone switch has management enabled but operators cannot reach it from the restricted management subnet. Which corrective action best meets the requirement?

  1. Adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements
  2. Configure its supported management IP route and permitted administrative access services
  3. Follow supported management-port Layer 3 design limits or use an appropriate in-band topology
  4. Use only supported per-port CoS egress queue policies and verify capability on the exact model

Explanation

Correct Answer

B:

The primary failure mode is that management-plane routing and access controls are separate from user data forwarding. The proposed action directly fixes it by requiring the team to configure its supported management IP route and permitted administrative access services; afterward, verify that an authorized manager logs in over the approved path and guest access fails.

Incorrect Answers

A:

The option addresses the separate situation where the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. For this case, the more appropriate response is to configure its supported management IP route and permitted administrative access services. For the Glenbrook enterprise network team, the direct corrective action is to configure its supported management IP route and permitted administrative access services.

C:

Follow supported management-port Layer 3 design limits or use an appropriate in-band topology can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to configure its supported management IP route and permitted administrative access services. For the Glenbrook enterprise network team, the direct corrective action is to configure its supported management IP route and permitted administrative access services.

D:

The offered alternative is: Use only supported per-port CoS egress queue policies and verify capability on the exact model. It addresses this separate failure mode: Not all advanced switch features are available on shared tenant ports. In the current case, the observed mechanism is: Management-plane routing and access controls are separate from user data forwarding. The keyed action, Configure its supported management IP route and permitted administrative access services., targets that condition more directly.

Question 354

At the Glenbrook enterprise network team, a standalone switch has management enabled but operators cannot reach it from the restricted management subnet. Which underlying issue most directly explains this situation?

  1. Management-plane routing and access controls are separate from user data forwarding
  2. Unreviewed automatic authorization can admit a connected switch before identity and installation are checked
  3. The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS
  4. Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration

Explanation

Correct Answer

A:

The evidence indicates that management-plane routing and access controls are separate from user data forwarding. The appropriate response is to configure its supported management IP route and permitted administrative access services and demonstrate that an authorized manager logs in over the approved path and guest access fails.

Incorrect Answers

B:

Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. That is not the mechanism that accounts for the stated failure at the Glenbrook enterprise network team.

C:

The offered principle is: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. In the source material it is associated with: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. This case has a different controlling cause: Management-plane routing and access controls are separate from user data forwarding. Its keyed mechanism is: Management-plane routing and access controls are separate from user data forwarding.

D:

Although physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration, the presented symptoms do not support that as the primary cause; they indicate that management-plane routing and access controls are separate from user data forwarding. For the Glenbrook enterprise network team, the direct corrective action is to configure its supported management IP route and permitted administrative access services.

Question 355

At the Glenbrook enterprise network team, a standalone switch has management enabled but operators cannot reach it from the restricted management subnet. What evidence would justify considering this concern addressed?

  1. A controlled restart retains the approved VLAN and management settings
  2. A controlled primary path failure retains switch inventory and permitted services
  3. An authorized manager logs in over the approved path and guest access fails
  4. A two-tenant load test preserves the approved class treatment without leakage

Explanation

Correct Answer

C:

At the Glenbrook enterprise network team, evidence that an authorized manager logs in over the approved path and guest access fails directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

A controlled restart retains the approved VLAN and management settings. That result would test a control for this other failure: Unsaved changes in active configuration can disappear during restart. The question instead requires evidence for: Management-plane routing and access controls are separate from user data forwarding. The direct outcome to verify is: An authorized manager logs in over the approved path and guest access fails.

B:

The offered observation is: A controlled primary path failure retains switch inventory and permitted services. It would support the separate mechanism: A configured backup interface does not prove switch management survives an upstream path outage. In this case the decisive dependency is: Management-plane routing and access controls are separate from user data forwarding. The original keyed verification is: An authorized manager logs in over the approved path and guest access fails.

D:

The offered observation is: A two-tenant load test preserves the approved class treatment without leakage. It would support the separate mechanism: Not all advanced switch features are available on shared tenant ports. In this case the decisive dependency is: Management-plane routing and access controls are separate from user data forwarding. The original keyed verification is: An authorized manager logs in over the approved path and guest access fails.

Question 356

At the Glenbrook enterprise network team, a standalone switch has management enabled but operators cannot reach it from the restricted management subnet. How should the organization sustain the improvement?

  1. Audit management addresses and access-source restrictions
  2. Audit the management mode before every switch change
  3. Review L3 FortiLink limitations before adding islands
  4. Exercise link-loss scenarios after ring changes

Explanation

Correct Answer

A:

The team should audit management addresses and access-source restrictions. That recurring practice targets the same weakness, namely that management-plane routing and access controls are separate from user data forwarding.

Incorrect Answers

B:

Audit the management mode before every switch change. That safeguard would help prevent recurrence of: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. The risk being reviewed here is instead: Management-plane routing and access controls are separate from user data forwarding. The matching ongoing control is: Audit management addresses and access-source restrictions.

C:

That routine supports fortilink over l3 island routing, but the relevant ongoing risk requires the team to audit management addresses and access-source restrictions. For the Glenbrook enterprise network team, the direct corrective action is to configure its supported management IP route and permitted administrative access services.

D:

Exercise link-loss scenarios after ring changes. That safeguard would help prevent recurrence of: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The risk being reviewed here is instead: Management-plane routing and access controls are separate from user data forwarding. The matching ongoing control is: Audit management addresses and access-source restrictions.

Question 357

At the Thornfield network modernization program, a rollout team hand-configures every FortiSwitch although the environment supports FortiLink discovery and provisioning. Which approach best resolves the described issue?

  1. Use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates
  2. Authorize the intended switch serial number through the FortiGate controller after confirming physical identity
  3. Select a supported VLAN TPID profile consistently across the provider handoff
  4. Follow supported management-port Layer 3 design limits or use an appropriate in-band topology

Explanation

Correct Answer

A:

The reported facts support this change rather than a general platform replacement. The team should use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates because manual per-device setup increases configuration drift and delays consistent provisioning. A suitable test confirms that an approved factory-reset switch receives the correct managed inventory and site policy.

Incorrect Answers

B:

The offered action is: Authorize the intended switch serial number through the FortiGate controller after confirming physical identity. It is associated with this separate technical condition: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The actual incident concerns a different dependency: Manual per-device setup increases configuration drift and delays consistent provisioning. The corresponding change is: Use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates.

C:

This alternative would be suitable where an outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. It does not by itself resolve the need to use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates. For the Thornfield network modernization program, the direct corrective action is to use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates.

D:

Follow supported management-port Layer 3 design limits or use an appropriate in-band topology addresses a different kind of problem: the documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. Here the reported weakness is that manual per-device setup increases configuration drift and delays consistent provisioning. For the Thornfield network modernization program, the direct corrective action is to use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates.

Question 358

At the Thornfield network modernization program, a rollout team hand-configures every FortiSwitch although the environment supports FortiLink discovery and provisioning. Which explanation best accounts for the concern?

  1. Excess controller privileges allow unintended changes to managed switch configurations
  2. Manual per-device setup increases configuration drift and delays consistent provisioning
  3. Virtual tenant separation does not create independent physical power supplies
  4. An outer service VLAN alone cannot classify every intended tenant inner VLAN path

Explanation

Correct Answer

B:

The problem stems from the fact that manual per-device setup increases configuration drift and delays consistent provisioning. A correct solution would use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates and check that an approved factory-reset switch receives the correct managed inventory and site policy.

Incorrect Answers

A:

The offered principle is: Excess controller privileges allow unintended changes to managed switch configurations. In the source material it is associated with: Excess controller privileges allow unintended changes to managed switch configurations. This case has a different controlling cause: Manual per-device setup increases configuration drift and delays consistent provisioning. Its keyed mechanism is: Manual per-device setup increases configuration drift and delays consistent provisioning.

C:

The offered principle is: Virtual tenant separation does not create independent physical power supplies. In the source material it is associated with: Virtual tenant separation does not create independent physical power supplies. This case has a different controlling cause: Manual per-device setup increases configuration drift and delays consistent provisioning. Its keyed mechanism is: Manual per-device setup increases configuration drift and delays consistent provisioning.

D:

An outer service VLAN alone cannot classify every intended tenant inner VLAN path. That may occur elsewhere, but the evidence at the Thornfield network modernization program instead points to the fact that manual per-device setup increases configuration drift and delays consistent provisioning.

Question 359

At the Thornfield network modernization program, a rollout team hand-configures every FortiSwitch although the environment supports FortiLink discovery and provisioning. Which test result best shows the requirement is met?

  1. The setting persists after synchronization and a controlled switch restart
  2. A cross-tenant denied test fails while each tenant reaches its permitted gateway
  3. The root controller sees the physical unit and tenant sees only exported resources
  4. An approved factory-reset switch receives the correct managed inventory and site policy

Explanation

Correct Answer

D:

The team can confirm the fix by showing that an approved factory-reset switch receives the correct managed inventory and site policy. This aligns with the corrective design to use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates.

Incorrect Answers

A:

The setting persists after synchronization and a controlled switch restart. That result would test a control for this other failure: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. The question instead requires evidence for: Manual per-device setup increases configuration drift and delays consistent provisioning. The direct outcome to verify is: An approved factory-reset switch receives the correct managed inventory and site policy.

B:

The offered observation is: A cross-tenant denied test fails while each tenant reaches its permitted gateway. It would support the separate mechanism: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. In this case the decisive dependency is: Manual per-device setup increases configuration drift and delays consistent provisioning. The original keyed verification is: An approved factory-reset switch receives the correct managed inventory and site policy.

C:

The root controller sees the physical unit and tenant sees only exported resources. That result would test a control for this other failure: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The question instead requires evidence for: Manual per-device setup increases configuration drift and delays consistent provisioning. The direct outcome to verify is: An approved factory-reset switch receives the correct managed inventory and site policy.

Question 360

At the Thornfield network modernization program, a rollout team hand-configures every FortiSwitch although the environment supports FortiLink discovery and provisioning. Which ongoing control best prevents this issue from recurring?

  1. Review zero-touch profiles when sites are introduced
  2. Audit auto-authorization settings and new switch registrations
  3. Verify peer group configuration after firmware upgrades
  4. Review tenant device forecasts before increasing limits

Explanation

Correct Answer

A:

The continuing safeguard is to review zero-touch profiles when sites are introduced. It helps avoid the original condition: manual per-device setup increases configuration drift and delays consistent provisioning.

Incorrect Answers

B:

Audit auto-authorization settings and new switch registrations. That safeguard would help prevent recurrence of: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The risk being reviewed here is instead: Manual per-device setup increases configuration drift and delays consistent provisioning. The matching ongoing control is: Review zero-touch profiles when sites are introduced.

C:

Verify peer group configuration after firmware upgrades is not the primary recurring safeguard for this problem. The team should review zero-touch profiles when sites are introduced. For the Thornfield network modernization program, the direct corrective action is to use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates.

D:

Review tenant device forecasts before increasing limits. That safeguard would help prevent recurrence of: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The risk being reviewed here is instead: Manual per-device setup increases configuration drift and delays consistent provisioning. The matching ongoing control is: Review zero-touch profiles when sites are introduced.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests