McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 35

Question 340

At the Elmhurst regional network integrator, a highly controlled facility enables unrestricted automatic switch authorization on an accessible FortiLink drop. Which setting or practice should be reviewed in future?

  1. Audit auto-authorization settings and new switch registrations
  2. Verify provisioning sequence in site rollout playbooks
  3. Document control-plane visibility versus tenant access boundaries
  4. Test redundant FortiLink transport at each site review

Explanation

Correct Answer

A:

After implementation, the team should audit auto-authorization settings and new switch registrations as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Verify provisioning sequence in site rollout playbooks. That safeguard would help prevent recurrence of: Downstream management discovery depends on operational and permitted upstream switching paths. The risk being reviewed here is instead: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The matching ongoing control is: Audit auto-authorization settings and new switch registrations.

C:

The suggested preventive check is: Document control-plane visibility versus tenant access boundaries. Its technical scope concerns: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. This question asks how to sustain control over: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The more targeted safeguard is: Audit auto-authorization settings and new switch registrations.

D:

Test redundant FortiLink transport at each site review. That safeguard would help prevent recurrence of: A configured backup interface does not prove switch management survives an upstream path outage. The risk being reviewed here is instead: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The matching ongoing control is: Audit auto-authorization settings and new switch registrations.

Question 341

At the Riverbrook data network services firm, a managed switch shows a connected phone but its port profile assigns a generic native VLAN rather than the approved voice design. Which corrective action best meets the requirement?

  1. Adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements
  2. Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace
  3. Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership
  4. Set the supported managed-switch port VLAN and voice policy in the FortiGate controller

Explanation

Correct Answer

D:

For the Riverbrook data network services firm, the appropriate correction is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller. The decisive reason is that a managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy; acceptance evidence is that a test phone reaches its permitted voice subnet after policy synchronization.

Incorrect Answers

A:

The option addresses the separate situation where the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. For this case, the more appropriate response is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller. For the Riverbrook data network services firm, the direct corrective action is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller.

B:

The offered action is: Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace. It is associated with this separate technical condition: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The actual incident concerns a different dependency: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The corresponding change is: Set the supported managed-switch port VLAN and voice policy in the FortiGate controller.

C:

Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller. For the Riverbrook data network services firm, the direct corrective action is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller.

Question 342

At the Riverbrook data network services firm, a managed switch shows a connected phone but its port profile assigns a generic native VLAN rather than the approved voice design. Which underlying issue most directly explains this situation?

  1. The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports
  2. Virtual tenant separation does not create independent physical power supplies
  3. A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy
  4. FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path

Explanation

Correct Answer

C:

The strongest explanation is that a managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. This accounts for the outcome and supports the action to set the supported managed-switch port VLAN and voice policy in the FortiGate controller.

Incorrect Answers

A:

The offered principle is: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. In the source material it is associated with: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. This case has a different controlling cause: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. Its keyed mechanism is: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy.

B:

Virtual tenant separation does not create independent physical power supplies. That is not the mechanism that accounts for the stated failure at the Riverbrook data network services firm.

D:

Although fortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path, the presented symptoms do not support that as the primary cause; they indicate that a managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. For the Riverbrook data network services firm, the direct corrective action is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller.

Question 343

At the Riverbrook data network services firm, a managed switch shows a connected phone but its port profile assigns a generic native VLAN rather than the approved voice design. What evidence would justify considering this concern addressed?

  1. A controlled restart retains the approved VLAN and management settings
  2. A review confirms chosen enforcement works without reliance on unsupported NAC behavior
  3. A test phone reaches its permitted voice subnet after policy synchronization
  4. The child is reachable from FortiGate and retains its assigned ports

Explanation

Correct Answer

C:

At the Riverbrook data network services firm, evidence that a test phone reaches its permitted voice subnet after policy synchronization directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

A controlled restart retains the approved VLAN and management settings. That result would test a control for this other failure: Unsaved changes in active configuration can disappear during restart. The question instead requires evidence for: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The direct outcome to verify is: A test phone reaches its permitted voice subnet after policy synchronization.

B:

The offered observation is: A review confirms chosen enforcement works without reliance on unsupported NAC behavior. It would support the separate mechanism: FortiSwitch NAC is not supported in the documented FortiLink over Layer 3 island design. In this case the decisive dependency is: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The original keyed verification is: A test phone reaches its permitted voice subnet after policy synchronization.

D:

The offered observation is: The child is reachable from FortiGate and retains its assigned ports. It would support the separate mechanism: Second-tier management depends on the operational first-tier inter-switch path. In this case the decisive dependency is: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The original keyed verification is: A test phone reaches its permitted voice subnet after policy synchronization.

Question 344

At the Riverbrook data network services firm, a managed switch shows a connected phone but its port profile assigns a generic native VLAN rather than the approved voice design. How should the organization sustain the improvement?

  1. Audit auto-authorization settings and new switch registrations
  2. Review port policy assignments during telephony moves
  3. Validate port-specific topology constraints before branch construction
  4. Audit routed management changes for unauthorized NAT

Explanation

Correct Answer

B:

For the Riverbrook data network services firm, this maintenance action preserves the fix: review port policy assignments during telephony moves. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Audit auto-authorization settings and new switch registrations. Its technical scope concerns: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. This question asks how to sustain control over: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The more targeted safeguard is: Review port policy assignments during telephony moves.

C:

That routine supports fortilink l3 management port single device, but the relevant ongoing risk requires the team to review port policy assignments during telephony moves. For the Riverbrook data network services firm, the direct corrective action is to set the supported managed-switch port VLAN and voice policy in the FortiGate controller.

D:

Audit routed management changes for unauthorized NAT. That safeguard would help prevent recurrence of: NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management. The risk being reviewed here is instead: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The matching ongoing control is: Review port policy assignments during telephony moves.

Question 345

At the Foxhaven switching consultancy, a FortiGate-managed FortiSwitch cannot power several new access points after the site adds cameras. Which approach best resolves the described issue?

  1. Resize and validate the supported FortiLink management address pool or topology addressing plan
  2. Adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements
  3. Design supported FortiLink over Layer 3 with functional routing and separate local VLANs
  4. Align supported FortiLink point-to-point TPID requirements with the intermediate transport

Explanation

Correct Answer

B:

For the Foxhaven switching consultancy, the appropriate correction is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements. The decisive reason is that the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports; acceptance evidence is that all prioritized access points remain powered during a simulated full load.

Incorrect Answers

A:

Resize and validate the supported FortiLink management address pool or topology addressing plan can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements. For the Foxhaven switching consultancy, the direct corrective action is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

C:

This alternative would be suitable where fortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. It does not by itself resolve the need to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements. For the Foxhaven switching consultancy, the direct corrective action is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

D:

Align supported FortiLink point-to-point TPID requirements with the intermediate transport addresses a different kind of problem: mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. Here the reported weakness is that the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. For the Foxhaven switching consultancy, the direct corrective action is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

Question 346

At the Foxhaven switching consultancy, a FortiGate-managed FortiSwitch cannot power several new access points after the site adds cameras. Which explanation best accounts for the concern?

  1. The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports
  2. Firmware version mismatches can break expected FortiLink and feature operation
  3. Some intermediate Layer 2 devices do not transport standard neighbor discovery frames
  4. Not all advanced switch features are available on shared tenant ports

Explanation

Correct Answer

A:

The strongest explanation is that the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. This accounts for the outcome and supports the action to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

Incorrect Answers

B:

Although firmware version mismatches can break expected FortiLink and feature operation, the presented symptoms do not support that as the primary cause; they indicate that the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. For the Foxhaven switching consultancy, the direct corrective action is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

C:

The offered principle is: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. In the source material it is associated with: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. This case has a different controlling cause: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. Its keyed mechanism is: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports.

D:

Not all advanced switch features are available on shared tenant ports. That may occur elsewhere, but the evidence at the Foxhaven switching consultancy instead points to the fact that the shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports.

Question 347

At the Foxhaven switching consultancy, a FortiGate-managed FortiSwitch cannot power several new access points after the site adds cameras. Which test result best shows the requirement is met?

  1. A cable tracing test matches the controller port description with the physical outlet
  2. The retired tenant cannot access the port and the replacement tenant gets a clean configuration
  3. Two tenants carry the same inner VLAN ID without exchanging frames
  4. All prioritized access points remain powered during a simulated full load

Explanation

Correct Answer

D:

The team can confirm the fix by showing that all prioritized access points remain powered during a simulated full load. This aligns with the corrective design to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

Incorrect Answers

A:

A cable tracing test matches the controller port description with the physical outlet. That result would test a control for this other failure: Missing port identity makes correct endpoint provisioning and incident isolation harder. The question instead requires evidence for: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. The direct outcome to verify is: All prioritized access points remain powered during a simulated full load.

B:

The offered observation is: The retired tenant cannot access the port and the replacement tenant gets a clean configuration. It would support the separate mechanism: A stale VDOM port assignment leaves residual tenant access and operational ownership. In this case the decisive dependency is: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. The original keyed verification is: All prioritized access points remain powered during a simulated full load.

C:

Two tenants carry the same inner VLAN ID without exchanging frames. That result would test a control for this other failure: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The question instead requires evidence for: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. The direct outcome to verify is: All prioritized access points remain powered during a simulated full load.

Question 348

At the Foxhaven switching consultancy, a FortiGate-managed FortiSwitch cannot power several new access points after the site adds cameras. Which ongoing control best prevents this issue from recurring?

  1. Require save and backup checks before closing standalone changes
  2. Document every downstream dependency when replacing an upstream switch
  3. Exercise link-loss scenarios after ring changes
  4. Monitor managed-switch PoE consumption by site

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to monitor managed-switch PoE consumption by site.

Incorrect Answers

A:

That routine supports fortiswitch standalone config persistence, but the relevant ongoing risk requires the team to monitor managed-switch PoE consumption by site. For the Foxhaven switching consultancy, the direct corrective action is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

B:

Document every downstream dependency when replacing an upstream switch. That safeguard would help prevent recurrence of: Second-tier management depends on the operational first-tier inter-switch path. The risk being reviewed here is instead: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. The matching ongoing control is: Monitor managed-switch PoE consumption by site.

C:

Exercise link-loss scenarios after ring changes is not the primary recurring safeguard for this problem. The team should monitor managed-switch PoE consumption by site. For the Foxhaven switching consultancy, the direct corrective action is to adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements.

Question 349

At the Umberfield infrastructure service operator, a fleet manager upgrades FortiOS but neglects FortiSwitchOS compatibility and causes managed-switch instability. Which implementation choice best addresses the situation?

  1. Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller
  2. Set the supported managed-switch port VLAN and voice policy in the FortiGate controller
  3. Use the supported single FortiGate to single FortiSwitch FortiLink topology with clear uplink role
  4. Design supported FortiLink over Layer 3 with functional routing and separate local VLANs

Explanation

Correct Answer

A:

This solution addresses the stated limitation: firmware version mismatches can break expected FortiLink and feature operation. Implementing it means the team should validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller, then verify that a pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade.

Incorrect Answers

B:

Set the supported managed-switch port VLAN and voice policy in the FortiGate controller addresses a different kind of problem: a managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. Here the reported weakness is that firmware version mismatches can break expected FortiLink and feature operation. For the Umberfield infrastructure service operator, the direct corrective action is to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller.

C:

The option addresses the separate situation where a simple managed site can be operated without unnecessary high-availability interconnections. For this case, the more appropriate response is to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller. For the Umberfield infrastructure service operator, the direct corrective action is to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller.

D:

The offered alternative is: Design supported FortiLink over Layer 3 with functional routing and separate local VLANs. It addresses this separate failure mode: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. In the current case, the observed mechanism is: Firmware version mismatches can break expected FortiLink and feature operation. The keyed action, Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller., targets that condition more directly.

Question 350

At the Umberfield infrastructure service operator, a fleet manager upgrades FortiOS but neglects FortiSwitchOS compatibility and causes managed-switch instability. What risk should the team identify as the primary issue?

  1. Missing port identity makes correct endpoint provisioning and incident isolation harder
  2. Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more
  3. Two physical uplinks to independent peers are not a coordinated aggregate by default
  4. Firmware version mismatches can break expected FortiLink and feature operation

Explanation

Correct Answer

D:

The architectural weakness is that firmware version mismatches can break expected FortiLink and feature operation. It can be addressed through the controlled change to validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller.

Incorrect Answers

A:

The offered action is: Missing port identity makes correct endpoint provisioning and incident isolation harder. It is associated with this separate technical condition: Missing port identity makes correct endpoint provisioning and incident isolation harder. The actual incident concerns a different dependency: Firmware version mismatches can break expected FortiLink and feature operation. The corresponding change is: Firmware version mismatches can break expected FortiLink and feature operation.

B:

Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. That may occur elsewhere, but the evidence at the Umberfield infrastructure service operator instead points to the fact that firmware version mismatches can break expected FortiLink and feature operation.

C:

The offered alternative is: Two physical uplinks to independent peers are not a coordinated aggregate by default. It addresses this separate failure mode: Two physical uplinks to independent peers are not a coordinated aggregate by default. In the current case, the observed mechanism is: Firmware version mismatches can break expected FortiLink and feature operation. The keyed action, Firmware version mismatches can break expected FortiLink and feature operation., targets that condition more directly.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests