McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 34

Question 330

At the Claremont network modernization program, a newly cabled FortiSwitch is discovered by FortiGate but stays unauthorized and does not receive production VLANs. Which underlying issue most directly explains this situation?

  1. A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller
  2. A port exported to a pool may need a tenant claim step before use
  3. FortiLink discovery does not itself guarantee the switch is authorized to receive configuration
  4. A stale VDOM port assignment leaves residual tenant access and operational ownership

Explanation

Correct Answer

C:

The strongest explanation is that fortiLink discovery does not itself guarantee the switch is authorized to receive configuration. This accounts for the outcome and supports the action to authorize the intended switch serial number through the FortiGate controller after confirming physical identity.

Incorrect Answers

A:

The offered principle is: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. In the source material it is associated with: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. This case has a different controlling cause: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. Its keyed mechanism is: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration.

B:

A port exported to a pool may need a tenant claim step before use. That is not the mechanism that accounts for the stated failure at the Claremont network modernization program.

D:

Although a stale VDOM port assignment leaves residual tenant access and operational ownership, the presented symptoms do not support that as the primary cause; they indicate that fortiLink discovery does not itself guarantee the switch is authorized to receive configuration. For the Claremont network modernization program, the direct corrective action is to authorize the intended switch serial number through the FortiGate controller after confirming physical identity.

Question 331

At the Claremont network modernization program, a newly cabled FortiSwitch is discovered by FortiGate but stays unauthorized and does not receive production VLANs. What evidence would justify considering this concern addressed?

  1. The approved serial number shows authorized managed status and correct assigned ports
  2. The switch clock matches the trusted reference and logs align with FortiGate events
  3. Either peer can be disabled while the access test remains connected
  4. Both tenants' critical endpoints remain powered in the approved full-load test

Explanation

Correct Answer

A:

This tests the real business behavior: the approved serial number shows authorized managed status and correct assigned ports. It specifically checks whether the risk that fortiLink discovery does not itself guarantee the switch is authorized to receive configuration has been reduced.

Incorrect Answers

B:

The offered observation is: The switch clock matches the trusted reference and logs align with FortiGate events. It would support the separate mechanism: Unsynchronized switch clocks make event correlation and certificate validation unreliable. In this case the decisive dependency is: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The original keyed verification is: The approved serial number shows authorized managed status and correct assigned ports.

C:

Either peer can be disabled while the access test remains connected. That result would test a control for this other failure: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The question instead requires evidence for: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The direct outcome to verify is: The approved serial number shows authorized managed status and correct assigned ports.

D:

The offered observation is: Both tenants' critical endpoints remain powered in the approved full-load test. It would support the separate mechanism: Virtual tenant separation does not create independent physical power supplies. In this case the decisive dependency is: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The original keyed verification is: The approved serial number shows authorized managed status and correct assigned ports.

Question 332

At the Claremont network modernization program, a newly cabled FortiSwitch is discovered by FortiGate but stays unauthorized and does not receive production VLANs. How should the organization sustain the improvement?

  1. Track authorized device inventory and decommission stale serials
  2. Maintain a tested FortiOS and FortiSwitchOS version matrix
  3. Audit island controller binding after HA or site migrations
  4. Monitor MCLAG peer and member health

Explanation

Correct Answer

A:

The team should track authorized device inventory and decommission stale serials. That recurring practice targets the same weakness, namely that fortiLink discovery does not itself guarantee the switch is authorized to receive configuration.

Incorrect Answers

B:

Maintain a tested FortiOS and FortiSwitchOS version matrix. That safeguard would help prevent recurrence of: Firmware version mismatches can break expected FortiLink and feature operation. The risk being reviewed here is instead: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The matching ongoing control is: Track authorized device inventory and decommission stale serials.

C:

That routine supports fortilink island split controller, but the relevant ongoing risk requires the team to track authorized device inventory and decommission stale serials. For the Claremont network modernization program, the direct corrective action is to authorize the intended switch serial number through the FortiGate controller after confirming physical identity.

D:

Monitor MCLAG peer and member health. That safeguard would help prevent recurrence of: Two physical uplinks to independent peers are not a coordinated aggregate by default. The risk being reviewed here is instead: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The matching ongoing control is: Track authorized device inventory and decommission stale serials.

Question 333

At the Redhaven LAN operations group, an administrator uses a normal FortiGate LAN port to connect a managed FortiSwitch and no controller discovery appears. Which approach best resolves the described issue?

  1. Configure the supported trusted time source and validate time synchronization
  2. Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace
  3. Configure the intended FortiGate interface as a supported FortiLink management connection
  4. Map customer VLAN tags and service VLAN tags using supported QinQ controls

Explanation

Correct Answer

C:

This solution addresses the stated limitation: a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. Implementing it means the team should configure the intended FortiGate interface as a supported FortiLink management connection, then verify that the FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface.

Incorrect Answers

A:

Configure the supported trusted time source and validate time synchronization can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to configure the intended FortiGate interface as a supported FortiLink management connection. For the Redhaven LAN operations group, the direct corrective action is to configure the intended FortiGate interface as a supported FortiLink management connection.

B:

The offered action is: Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace. It is associated with this separate technical condition: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The actual incident concerns a different dependency: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The corresponding change is: Configure the intended FortiGate interface as a supported FortiLink management connection.

D:

Map customer VLAN tags and service VLAN tags using supported QinQ controls addresses a different kind of problem: an outer service VLAN alone cannot classify every intended tenant inner VLAN path. Here the reported weakness is that a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. For the Redhaven LAN operations group, the direct corrective action is to configure the intended FortiGate interface as a supported FortiLink management connection.

Question 334

At the Redhaven LAN operations group, an administrator uses a normal FortiGate LAN port to connect a managed FortiSwitch and no controller discovery appears. Which explanation best accounts for the concern?

  1. Unsaved changes in active configuration can disappear during restart
  2. A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery
  3. Multiple bridged management uplinks can create loops without supported topology constraints
  4. NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management

Explanation

Correct Answer

B:

The problem stems from the fact that a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. A correct solution would configure the intended FortiGate interface as a supported FortiLink management connection and check that the FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface.

Incorrect Answers

A:

The offered principle is: Unsaved changes in active configuration can disappear during restart. In the source material it is associated with: Unsaved changes in active configuration can disappear during restart. This case has a different controlling cause: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. Its keyed mechanism is: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery.

C:

The offered principle is: Multiple bridged management uplinks can create loops without supported topology constraints. In the source material it is associated with: Multiple bridged management uplinks can create loops without supported topology constraints. This case has a different controlling cause: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. Its keyed mechanism is: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery.

D:

NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management. That may occur elsewhere, but the evidence at the Redhaven LAN operations group instead points to the fact that a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery.

Question 335

At the Redhaven LAN operations group, an administrator uses a normal FortiGate LAN port to connect a managed FortiSwitch and no controller discovery appears. Which test result best shows the requirement is met?

  1. A pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade
  2. The approved number of learned addresses works and excess sources follow policy
  3. The FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface
  4. The child is reachable from FortiGate and retains its assigned ports

Explanation

Correct Answer

C:

Because a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery, the required evidence must show that the FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

A pilot FortiSwitch reconnects to the controller with its production VLANs after upgrade. That result would test a control for this other failure: Firmware version mismatches can break expected FortiLink and feature operation. The question instead requires evidence for: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The direct outcome to verify is: The FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface.

B:

The offered observation is: The approved number of learned addresses works and excess sources follow policy. It would support the separate mechanism: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. In this case the decisive dependency is: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The original keyed verification is: The FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface.

D:

At the Redhaven LAN operations group, a result about fortiswitch two-tier uplink dependency would not show that the team corrected the failure where a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery.

Question 336

At the Redhaven LAN operations group, an administrator uses a normal FortiGate LAN port to connect a managed FortiSwitch and no controller discovery appears. Which ongoing control best prevents this issue from recurring?

  1. Review FortiGate administrator roles each quarter
  2. Review FortiLink interface assignment after firewall port migrations
  3. Recheck cross-VDOM VLAN settings after firmware upgrades
  4. Audit pool requests and approved port allocations

Explanation

Correct Answer

B:

The needed prevention is to review FortiLink interface assignment after firewall port migrations. It directly sustains the original change to configure the intended FortiGate interface as a supported FortiLink management connection.

Incorrect Answers

A:

That routine supports controller role permissions, but the relevant ongoing risk requires the team to review FortiLink interface assignment after firewall port migrations. For the Redhaven LAN operations group, the direct corrective action is to configure the intended FortiGate interface as a supported FortiLink management connection.

C:

Recheck cross-VDOM VLAN settings after firmware upgrades is not the primary recurring safeguard for this problem. The team should review FortiLink interface assignment after firewall port migrations. For the Redhaven LAN operations group, the direct corrective action is to configure the intended FortiGate interface as a supported FortiLink management connection.

D:

Audit pool requests and approved port allocations. That safeguard would help prevent recurrence of: A port exported to a pool may need a tenant claim step before use. The risk being reviewed here is instead: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The matching ongoing control is: Review FortiLink interface assignment after firewall port migrations.

Question 337

At the Elmhurst regional network integrator, a highly controlled facility enables unrestricted automatic switch authorization on an accessible FortiLink drop. Which implementation choice best addresses the situation?

  1. Make persistent managed-switch configuration through the owning FortiGate switch controller instead of local CLI
  2. Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership
  3. Use manual serial verification and authorization for switches where onboarding policy requires explicit approval
  4. Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: use manual serial verification and authorization for switches where onboarding policy requires explicit approval. The observed risk is that unreviewed automatic authorization can admit a connected switch before identity and installation are checked; a passing acceptance check would show that a test unknown switch stays unauthorized while the approved unit joins successfully.

Incorrect Answers

A:

This alternative would be suitable where a FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. It does not by itself resolve the need to use manual serial verification and authorization for switches where onboarding policy requires explicit approval. For the Elmhurst regional network integrator, the direct corrective action is to use manual serial verification and authorization for switches where onboarding policy requires explicit approval.

B:

Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership addresses a different kind of problem: managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. Here the reported weakness is that unreviewed automatic authorization can admit a connected switch before identity and installation are checked. For the Elmhurst regional network integrator, the direct corrective action is to use manual serial verification and authorization for switches where onboarding policy requires explicit approval.

D:

The offered alternative is: Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ. It addresses this separate failure mode: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. In the current case, the observed mechanism is: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The keyed action, Use manual serial verification and authorization for switches where onboarding policy requires explicit approval., targets that condition more directly.

Question 338

At the Elmhurst regional network integrator, a highly controlled facility enables unrestricted automatic switch authorization on an accessible FortiLink drop. What risk should the team identify as the primary issue?

  1. Missing port identity makes correct endpoint provisioning and incident isolation harder
  2. Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection
  3. A port exported to a pool may need a tenant claim step before use
  4. Unreviewed automatic authorization can admit a connected switch before identity and installation are checked

Explanation

Correct Answer

D:

The architectural weakness is that unreviewed automatic authorization can admit a connected switch before identity and installation are checked. It can be addressed through the controlled change to use manual serial verification and authorization for switches where onboarding policy requires explicit approval.

Incorrect Answers

A:

The offered action is: Missing port identity makes correct endpoint provisioning and incident isolation harder. It is associated with this separate technical condition: Missing port identity makes correct endpoint provisioning and incident isolation harder. The actual incident concerns a different dependency: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The corresponding change is: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked.

B:

Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. That may occur elsewhere, but the evidence at the Elmhurst regional network integrator instead points to the fact that unreviewed automatic authorization can admit a connected switch before identity and installation are checked.

C:

The offered alternative is: A port exported to a pool may need a tenant claim step before use. It addresses this separate failure mode: A port exported to a pool may need a tenant claim step before use. In the current case, the observed mechanism is: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The keyed action, Unreviewed automatic authorization can admit a connected switch before identity and installation are checked., targets that condition more directly.

Question 339

At the Elmhurst regional network integrator, a highly controlled facility enables unrestricted automatic switch authorization on an accessible FortiLink drop. What is the strongest acceptance test for this change?

  1. A test unknown switch stays unauthorized while the approved unit joins successfully
  2. Two pilot switches apply the same approved baseline while retaining permitted exceptions
  3. The tenant retains permitted connectivity and no orphaned port allocation remains
  4. The island remains managed while an L2 broadcast remains local to its site

Explanation

Correct Answer

A:

Because unreviewed automatic authorization can admit a connected switch before identity and installation are checked, the required evidence must show that a test unknown switch stays unauthorized while the approved unit joins successfully. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Elmhurst regional network integrator, a result about controller switch profile inheritance would not show that the team corrected the failure where unreviewed automatic authorization can admit a connected switch before identity and installation are checked.

C:

The tenant retains permitted connectivity and no orphaned port allocation remains. That result would test a control for this other failure: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. The question instead requires evidence for: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The direct outcome to verify is: A test unknown switch stays unauthorized while the approved unit joins successfully.

D:

The offered observation is: The island remains managed while an L2 broadcast remains local to its site. It would support the separate mechanism: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. In this case the decisive dependency is: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The original keyed verification is: A test unknown switch stays unauthorized while the approved unit joins successfully.

Question 340

At the Elmhurst regional network integrator, a highly controlled facility enables unrestricted automatic switch authorization on an accessible FortiLink drop. Which setting or practice should be reviewed in future?

  1. Audit auto-authorization settings and new switch registrations
  2. Verify provisioning sequence in site rollout playbooks
  3. Document control-plane visibility versus tenant access boundaries
  4. Test redundant FortiLink transport at each site review

Explanation

Correct Answer

A:

After implementation, the team should audit auto-authorization settings and new switch registrations as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Verify provisioning sequence in site rollout playbooks. That safeguard would help prevent recurrence of: Downstream management discovery depends on operational and permitted upstream switching paths. The risk being reviewed here is instead: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The matching ongoing control is: Audit auto-authorization settings and new switch registrations.

C:

The suggested preventive check is: Document control-plane visibility versus tenant access boundaries. Its technical scope concerns: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. This question asks how to sustain control over: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The more targeted safeguard is: Audit auto-authorization settings and new switch registrations.

D:

Test redundant FortiLink transport at each site review. That safeguard would help prevent recurrence of: A configured backup interface does not prove switch management survives an upstream path outage. The risk being reviewed here is instead: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The matching ongoing control is: Audit auto-authorization settings and new switch registrations.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests