McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 72

Question 710

At the Ashbourne infrastructure service operator, security personnel need a capture of a narrow traffic flow but a global mirror overloads the analyzer. What risk should the team identify as the primary issue?

  1. Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data
  2. An ingress-only filter may not cover the intended egress direction of a prohibited flow
  3. An unrestricted MAC-learning port does not enforce the inventory expectation
  4. High-rate unwanted multicast can consume shared switch forwarding capacity

Explanation

Correct Answer

A:

The situation shows that mirroring every switch packet can overrun the monitoring destination and disclose unrelated data, rather than merely a monitoring or presentation issue. Remediation is to configure supported ACL-based selective mirroring for only authorized matching traffic.

Incorrect Answers

B:

An ingress-only filter may not cover the intended egress direction of a prohibited flow. That may occur elsewhere, but the evidence at the Ashbourne infrastructure service operator instead points to the fact that mirroring every switch packet can overrun the monitoring destination and disclose unrelated data.

C:

The offered alternative is: An unrestricted MAC-learning port does not enforce the inventory expectation. It addresses this separate failure mode: An unrestricted MAC-learning port does not enforce the inventory expectation. In the current case, the observed mechanism is: Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data. The keyed action, Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data., targets that condition more directly.

D:

High-rate unwanted multicast can consume shared switch forwarding capacity. That is not the mechanism that accounts for the stated failure at the Ashbourne infrastructure service operator.

Question 711

At the Ashbourne infrastructure service operator, security personnel need a capture of a narrow traffic flow but a global mirror overloads the analyzer. What is the strongest acceptance test for this change?

  1. The prohibited flow is dropped and allowed office traffic remains operational
  2. The moved device forwards under the correct renewed binding and spoofed entries fail
  3. The approved static endpoint forwards and an unauthorized source remains blocked
  4. The analyzer receives exactly the intended test flow and no unrelated tenant packets

Explanation

Correct Answer

D:

The intended correction is to configure supported ACL-based selective mirroring for only authorized matching traffic. The decisive verification is that the analyzer receives exactly the intended test flow and no unrelated tenant packets, rather than only confirming configuration was saved.

Incorrect Answers

A:

The prohibited flow is dropped and allowed office traffic remains operational. That result would test a control for this other failure: An unrestricted ingress path forwards matching frames before intended access controls apply. The question instead requires evidence for: Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data. The direct outcome to verify is: The analyzer receives exactly the intended test flow and no unrelated tenant packets.

B:

At the Ashbourne infrastructure service operator, a result about arp source binding stale would not show that the team corrected the failure where mirroring every switch packet can overrun the monitoring destination and disclose unrelated data.

C:

The approved static endpoint forwards and an unauthorized source remains blocked. That result would test a control for this other failure: DHCP-based dynamic source bindings do not exist for devices with manually assigned addresses. The question instead requires evidence for: Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data. The direct outcome to verify is: The analyzer receives exactly the intended test flow and no unrelated tenant packets.

Question 712

At the Ashbourne infrastructure service operator, security personnel need a capture of a narrow traffic flow but a global mirror overloads the analyzer. Which setting or practice should be reviewed in future?

  1. Audit switch segmentation and firewall policy together after additions
  2. Remove temporary selective mirroring after investigation
  3. Inspect DHCP anomaly statistics during repeated address disruptions
  4. Review static binding records after industrial controller replacement

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to remove temporary selective mirroring after investigation.

Incorrect Answers

A:

Audit switch segmentation and firewall policy together after additions is not the primary recurring safeguard for this problem. The team should remove temporary selective mirroring after investigation. For the Ashbourne infrastructure service operator, the direct corrective action is to configure supported ACL-based selective mirroring for only authorized matching traffic.

C:

The suggested preventive check is: Inspect DHCP anomaly statistics during repeated address disruptions. Its technical scope concerns: DHCP snooping can reject invalid host lease messages that do not match binding ownership. This question asks how to sustain control over: Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data. The more targeted safeguard is: Remove temporary selective mirroring after investigation.

D:

Review static binding records after industrial controller replacement. That safeguard would help prevent recurrence of: DHCP-based dynamic source bindings do not exist for devices with manually assigned addresses. The risk being reviewed here is instead: Mirroring every switch packet can overrun the monitoring destination and disclose unrelated data. The matching ongoing control is: Remove temporary selective mirroring after investigation.

Question 713

At the Quayside enterprise network team, an operator copies an old FortiSwitch ACL command into 7.6 and assumes it applies to both ingress and egress. Which corrective action best meets the requirement?

  1. Use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement
  2. Apply the ACL to the supported ingress or egress location actually carrying the target traffic
  3. Apply DHCP snooping validation on the proper untrusted port boundary
  4. Apply a supported dynamic MAC learning limit or equivalent port security policy

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement. The observed risk is that fortiSwitch ACL configuration distinguishes ingress prelookup and egress stages; a passing acceptance check would show that the same lab flow demonstrates intended stage enforcement with supported commands.

Incorrect Answers

B:

The offered action is: Apply the ACL to the supported ingress or egress location actually carrying the target traffic. It is associated with this separate technical condition: A syntactically correct ACL has no effect if deployed outside the packet path. The actual incident concerns a different dependency: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The corresponding change is: Use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement.

C:

Apply DHCP snooping validation on the proper untrusted port boundary can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement. For the Quayside enterprise network team, the direct corrective action is to use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement.

D:

The offered alternative is: Apply a supported dynamic MAC learning limit or equivalent port security policy. It addresses this separate failure mode: Unlimited downstream MAC learning can broaden access and consume switch forwarding resources. In the current case, the observed mechanism is: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The keyed action, Use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement., targets that condition more directly.

Question 714

At the Quayside enterprise network team, an operator copies an old FortiSwitch ACL command into 7.6 and assumes it applies to both ingress and egress. Which underlying issue most directly explains this situation?

  1. FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages
  2. ACL stages affect different points of the switch packet-processing pipeline
  3. DHCP snooping can discard authorized server replies arriving through an untrusted port
  4. A certificate-based EAP method cannot accept a client credential outside its trusted validity period

Explanation

Correct Answer

A:

The evidence indicates that fortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The appropriate response is to use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement and demonstrate that the same lab flow demonstrates intended stage enforcement with supported commands.

Incorrect Answers

B:

ACL stages affect different points of the switch packet-processing pipeline. That is not the mechanism that accounts for the stated failure at the Quayside enterprise network team.

C:

The offered principle is: DHCP snooping can discard authorized server replies arriving through an untrusted port. In the source material it is associated with: DHCP snooping can discard authorized server replies arriving through an untrusted port. This case has a different controlling cause: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. Its keyed mechanism is: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages.

D:

Although a certificate-based EAP method cannot accept a client credential outside its trusted validity period, the presented symptoms do not support that as the primary cause; they indicate that fortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. For the Quayside enterprise network team, the direct corrective action is to use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement.

Question 715

At the Quayside enterprise network team, an operator copies an old FortiSwitch ACL command into 7.6 and assumes it applies to both ingress and egress. What evidence would justify considering this concern addressed?

  1. The prohibited flow is dropped and allowed office traffic remains operational
  2. The approved client receives a lease and rogue DHCP offers stay blocked
  3. A known user authenticates and the RADIUS server logs a permitted request
  4. The same lab flow demonstrates intended stage enforcement with supported commands

Explanation

Correct Answer

D:

This is the relevant acceptance result: the same lab flow demonstrates intended stage enforcement with supported commands. It demonstrates the outcome of choosing to use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement.

Incorrect Answers

A:

The prohibited flow is dropped and allowed office traffic remains operational. That result would test a control for this other failure: An unrestricted ingress path forwards matching frames before intended access controls apply. The question instead requires evidence for: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The direct outcome to verify is: The same lab flow demonstrates intended stage enforcement with supported commands.

B:

The offered observation is: The approved client receives a lease and rogue DHCP offers stay blocked. It would support the separate mechanism: DHCP relay solves Layer 3 broadcast reachability while snooping filters unauthorized DHCP sources. In this case the decisive dependency is: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The original keyed verification is: The same lab flow demonstrates intended stage enforcement with supported commands.

C:

A known user authenticates and the RADIUS server logs a permitted request. That result would test a control for this other failure: 802.1X authentication relies on successful exchange with its configured identity server. The question instead requires evidence for: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The direct outcome to verify is: The same lab flow demonstrates intended stage enforcement with supported commands.

Question 716

At the Quayside enterprise network team, an operator copies an old FortiSwitch ACL command into 7.6 and assumes it applies to both ingress and egress. How should the organization sustain the improvement?

  1. Recheck ACL API and CLI syntax with firmware changes
  2. Audit ACL attachment and match counters after port moves
  3. Retest guest onboarding after identity infrastructure changes
  4. Review static binding records after industrial controller replacement

Explanation

Correct Answer

A:

The team should recheck ACL API and CLI syntax with firmware changes. That recurring practice targets the same weakness, namely that fortiSwitch ACL configuration distinguishes ingress prelookup and egress stages.

Incorrect Answers

B:

Audit ACL attachment and match counters after port moves. That safeguard would help prevent recurrence of: An unrestricted ingress path forwards matching frames before intended access controls apply. The risk being reviewed here is instead: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The matching ongoing control is: Recheck ACL API and CLI syntax with firmware changes.

C:

That routine supports 802.1x guest vlan behavior, but the relevant ongoing risk requires the team to recheck ACL API and CLI syntax with firmware changes. For the Quayside enterprise network team, the direct corrective action is to use the FortiSwitchOS 7.6 supported ACL stage syntax and validate policy placement.

D:

Review static binding records after industrial controller replacement. That safeguard would help prevent recurrence of: DHCP-based dynamic source bindings do not exist for devices with manually assigned addresses. The risk being reviewed here is instead: FortiSwitch ACL configuration distinguishes ingress prelookup and egress stages. The matching ongoing control is: Recheck ACL API and CLI syntax with firmware changes.

Question 717

At the Cedarport network modernization program, a department trusts VLAN isolation alone to block unauthorized access to a sensitive routed service. Which approach best resolves the described issue?

  1. Reorder or narrow ACL rules so the specific security decision is evaluated correctly
  2. Apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation
  3. Correct the DHCP snooping trust setting on the designated server-facing uplink
  4. Configure a supported guest VLAN with least-privilege access for permitted visitors

Explanation

Correct Answer

B:

For the Cedarport network modernization program, the appropriate correction is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation. The decisive reason is that VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic; acceptance evidence is that a restricted VLAN cannot reach the sensitive service while a permitted VLAN can.

Incorrect Answers

A:

Reorder or narrow ACL rules so the specific security decision is evaluated correctly can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

C:

This alternative would be suitable where dHCP snooping can discard authorized server replies arriving through an untrusted port. It does not by itself resolve the need to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

D:

Configure a supported guest VLAN with least-privilege access for permitted visitors addresses a different kind of problem: unauthenticated devices should not inherit corporate routing or service permissions. Here the reported weakness is that VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

Question 718

At the Cedarport network modernization program, a department trusts VLAN isolation alone to block unauthorized access to a sensitive routed service. Which explanation best accounts for the concern?

  1. An unrestricted ingress path forwards matching frames before intended access controls apply
  2. VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic
  3. Without snooping a client port can inject unauthorized DHCP offers into a VLAN
  4. A correct security profile does not protect interfaces to which it was never assigned

Explanation

Correct Answer

B:

The problem stems from the fact that VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. A correct solution would apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation and check that a restricted VLAN cannot reach the sensitive service while a permitted VLAN can.

Incorrect Answers

A:

The offered principle is: An unrestricted ingress path forwards matching frames before intended access controls apply. In the source material it is associated with: An unrestricted ingress path forwards matching frames before intended access controls apply. This case has a different controlling cause: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. Its keyed mechanism is: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic.

C:

The offered principle is: Without snooping a client port can inject unauthorized DHCP offers into a VLAN. In the source material it is associated with: Without snooping a client port can inject unauthorized DHCP offers into a VLAN. This case has a different controlling cause: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. Its keyed mechanism is: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic.

D:

A correct security profile does not protect interfaces to which it was never assigned. That may occur elsewhere, but the evidence at the Cedarport network modernization program instead points to the fact that VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic.

Question 719

At the Cedarport network modernization program, a department trusts VLAN isolation alone to block unauthorized access to a sensitive routed service. Which test result best shows the requirement is met?

  1. The seeded packet raises the expected match counter and is handled per policy
  2. A server outage places only approved devices in the limited continuity segment
  3. A restricted VLAN cannot reach the sensitive service while a permitted VLAN can
  4. Authorized clients resolve their gateway and poisoned ARP packets are denied

Explanation

Correct Answer

C:

Because VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic, the required evidence must show that a restricted VLAN cannot reach the sensitive service while a permitted VLAN can. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

The seeded packet raises the expected match counter and is handled per policy. That result would test a control for this other failure: An unused ACL policy cannot protect a flow that never matches its rules. The question instead requires evidence for: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. The direct outcome to verify is: A restricted VLAN cannot reach the sensitive service while a permitted VLAN can.

B:

The offered observation is: A server outage places only approved devices in the limited continuity segment. It would support the separate mechanism: Authentication service outages require deliberate restricted failure handling rather than implicit trust. In this case the decisive dependency is: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. The original keyed verification is: A restricted VLAN cannot reach the sensitive service while a permitted VLAN can.

D:

At the Cedarport network modernization program, a result about dai prerequisite database would not show that the team corrected the failure where VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic.

Question 720

At the Cedarport network modernization program, a department trusts VLAN isolation alone to block unauthorized access to a sensitive routed service. Which ongoing control best prevents this issue from recurring?

  1. Audit scheduled ACL changes around daylight-saving transitions
  2. Audit switch segmentation and firewall policy together after additions
  3. Monitor DAI bindings and violations after DHCP topology changes
  4. Check RADIUS server health and route reachability continuously

Explanation

Correct Answer

B:

The needed prevention is to audit switch segmentation and firewall policy together after additions. It directly sustains the original change to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

Incorrect Answers

A:

That routine supports acl schedule mistaken activation, but the relevant ongoing risk requires the team to audit switch segmentation and firewall policy together after additions. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

C:

Monitor DAI bindings and violations after DHCP topology changes is not the primary recurring safeguard for this problem. The team should audit switch segmentation and firewall policy together after additions. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

D:

Check RADIUS server health and route reachability continuously. That safeguard would help prevent recurrence of: 802.1X authentication relies on successful exchange with its configured identity server. The risk being reviewed here is instead: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. The matching ongoing control is: Audit switch segmentation and firewall policy together after additions.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests