McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 73

Question 720

At the Cedarport network modernization program, a department trusts VLAN isolation alone to block unauthorized access to a sensitive routed service. Which ongoing control best prevents this issue from recurring?

  1. Audit scheduled ACL changes around daylight-saving transitions
  2. Audit switch segmentation and firewall policy together after additions
  3. Monitor DAI bindings and violations after DHCP topology changes
  4. Check RADIUS server health and route reachability continuously

Explanation

Correct Answer

B:

The needed prevention is to audit switch segmentation and firewall policy together after additions. It directly sustains the original change to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

Incorrect Answers

A:

That routine supports acl schedule mistaken activation, but the relevant ongoing risk requires the team to audit switch segmentation and firewall policy together after additions. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

C:

Monitor DAI bindings and violations after DHCP topology changes is not the primary recurring safeguard for this problem. The team should audit switch segmentation and firewall policy together after additions. For the Cedarport network modernization program, the direct corrective action is to apply approved FortiGate routed firewall policy alongside FortiSwitch Layer 2 segmentation.

D:

Check RADIUS server health and route reachability continuously. That safeguard would help prevent recurrence of: 802.1X authentication relies on successful exchange with its configured identity server. The risk being reviewed here is instead: VLANs separate broadcast domains but routed interfaces may still permit inter-VLAN traffic. The matching ongoing control is: Audit switch segmentation and firewall policy together after additions.

Question 721

At the Pinecrest managed-network provider, a network analyst runs a FortiSwitch packet capture on an unrelated uplink and sees no packets from the broken endpoint. Which implementation choice best addresses the situation?

  1. Synchronize switch and FortiGate clocks before correlating packet-capture events
  2. Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies
  3. Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link
  4. Create a supported packet-capture profile on the actual traffic-carrying physical or system interface

Explanation

Correct Answer

D:

The primary failure mode is that a capture from the wrong interface cannot show the target packet path. The proposed action directly fixes it by requiring the team to create a supported packet-capture profile on the actual traffic-carrying physical or system interface; afterward, verify that the intended endpoint frames appear with correct source and destination fields.

Incorrect Answers

A:

This alternative would be suitable where unsynchronized device clocks can make a correct event sequence appear contradictory. It does not by itself resolve the need to create a supported packet-capture profile on the actual traffic-carrying physical or system interface. For the Pinecrest managed-network provider, the direct corrective action is to create a supported packet-capture profile on the actual traffic-carrying physical or system interface.

B:

Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies addresses a different kind of problem: copper faults can affect negotiation independently of Layer 2 configuration. Here the reported weakness is that a capture from the wrong interface cannot show the target packet path. For the Pinecrest managed-network provider, the direct corrective action is to create a supported packet-capture profile on the actual traffic-carrying physical or system interface.

C:

The option addresses the separate situation where routed FortiLink management does not transport a continuous VLAN data path between the sites. For this case, the more appropriate response is to create a supported packet-capture profile on the actual traffic-carrying physical or system interface. For the Pinecrest managed-network provider, the direct corrective action is to create a supported packet-capture profile on the actual traffic-carrying physical or system interface.

Question 722

At the Pinecrest managed-network provider, a network analyst runs a FortiSwitch packet capture on an unrelated uplink and sees no packets from the broken endpoint. What risk should the team identify as the primary issue?

  1. Broad captures can exhaust limited capture memory and omit useful packets
  2. Power state alone cannot prove the management discovery path is physically or logically available
  3. The controller cannot build its intended neighbor map if required discovery frames are suppressed
  4. A capture from the wrong interface cannot show the target packet path

Explanation

Correct Answer

D:

The architectural weakness is that a capture from the wrong interface cannot show the target packet path. It can be addressed through the controlled change to create a supported packet-capture profile on the actual traffic-carrying physical or system interface.

Incorrect Answers

A:

The offered action is: Broad captures can exhaust limited capture memory and omit useful packets. It is associated with this separate technical condition: Broad captures can exhaust limited capture memory and omit useful packets. The actual incident concerns a different dependency: A capture from the wrong interface cannot show the target packet path. The corresponding change is: A capture from the wrong interface cannot show the target packet path.

B:

Power state alone cannot prove the management discovery path is physically or logically available. That may occur elsewhere, but the evidence at the Pinecrest managed-network provider instead points to the fact that a capture from the wrong interface cannot show the target packet path.

C:

The offered alternative is: The controller cannot build its intended neighbor map if required discovery frames are suppressed. It addresses this separate failure mode: The controller cannot build its intended neighbor map if required discovery frames are suppressed. In the current case, the observed mechanism is: A capture from the wrong interface cannot show the target packet path. The keyed action, A capture from the wrong interface cannot show the target packet path., targets that condition more directly.

Question 723

At the Pinecrest managed-network provider, a network analyst runs a FortiSwitch packet capture on an unrelated uplink and sees no packets from the broken endpoint. What is the strongest acceptance test for this change?

  1. The intended endpoint frames appear with correct source and destination fields
  2. The trunk capture shows the expected VLAN IDs for the test service
  3. A seeded blocked flow increments the expected rule and does not reach the service
  4. The expected blocked and forwarding STP states match the approved topology

Explanation

Correct Answer

A:

Because a capture from the wrong interface cannot show the target packet path, the required evidence must show that the intended endpoint frames appear with correct source and destination fields. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Pinecrest managed-network provider, a result about vlan tag capture position would not show that the team corrected the failure where a capture from the wrong interface cannot show the target packet path.

C:

A seeded blocked flow increments the expected rule and does not reach the service. That result would test a control for this other failure: A filter with no matching hits may be incorrectly ordered attached or classified. The question instead requires evidence for: A capture from the wrong interface cannot show the target packet path. The direct outcome to verify is: The intended endpoint frames appear with correct source and destination fields.

D:

The offered observation is: The expected blocked and forwarding STP states match the approved topology. It would support the separate mechanism: A healthy port can be intentionally blocked by spanning tree to prevent a loop. In this case the decisive dependency is: A capture from the wrong interface cannot show the target packet path. The original keyed verification is: The intended endpoint frames appear with correct source and destination fields.

Question 724

At the Pinecrest managed-network provider, a network analyst runs a FortiSwitch packet capture on an unrelated uplink and sees no packets from the broken endpoint. Which setting or practice should be reviewed in future?

  1. Retain a standard DHCP packet capture filter in troubleshooting runbooks
  2. Track PoE capacity alarms whenever new devices are powered
  3. Publish firmware inventory after each upgrade wave
  4. Check physical and VLAN forwarding path before each new capture

Explanation

Correct Answer

D:

For the Pinecrest managed-network provider, this maintenance action preserves the fix: check physical and VLAN forwarding path before each new capture. It should be revisited as the workload evolves.

Incorrect Answers

A:

Retain a standard DHCP packet capture filter in troubleshooting runbooks is not the primary recurring safeguard for this problem. The team should check physical and VLAN forwarding path before each new capture. For the Pinecrest managed-network provider, the direct corrective action is to create a supported packet-capture profile on the actual traffic-carrying physical or system interface.

B:

Track PoE capacity alarms whenever new devices are powered. That safeguard would help prevent recurrence of: An exhausted PoE power budget can interrupt otherwise healthy network links. The risk being reviewed here is instead: A capture from the wrong interface cannot show the target packet path. The matching ongoing control is: Check physical and VLAN forwarding path before each new capture.

C:

The suggested preventive check is: Publish firmware inventory after each upgrade wave. Its technical scope concerns: A partial firmware rollout can leave incompatible configuration behavior among devices. This question asks how to sustain control over: A capture from the wrong interface cannot show the target packet path. The more targeted safeguard is: Check physical and VLAN forwarding path before each new capture.

Question 725

At the Dartwood branch IT department, a phone remains without an IP lease and administrators debate whether DHCP Discover reaches the server. Which corrective action best meets the requirement?

  1. Capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply
  2. Capture EAPOL frames on the client-facing switch port before investigating server-side authorization
  3. Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair
  4. Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply. The observed risk is that the DHCP failure could occur before relay or after server response and needs packet-level isolation; a passing acceptance check would show that the trace shows the last successful DHCP message and the boundary where response disappears.

Incorrect Answers

B:

The offered action is: Capture EAPOL frames on the client-facing switch port before investigating server-side authorization. It is associated with this separate technical condition: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. The actual incident concerns a different dependency: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The corresponding change is: Capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply.

C:

Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply. For the Dartwood branch IT department, the direct corrective action is to capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply.

D:

The offered alternative is: Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters. It addresses this separate failure mode: An incompatible controller and switch software combination can disrupt FortiLink management. In the current case, the observed mechanism is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The keyed action, Capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply., targets that condition more directly.

Question 726

At the Dartwood branch IT department, a phone remains without an IP lease and administrators debate whether DHCP Discover reaches the server. Which underlying issue most directly explains this situation?

  1. Missing or altered discovery frames can prevent automatic topology association
  2. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  3. User VLAN forwarding can survive while the specific controller management path is broken
  4. FortiLink over Layer 3 requires functional routed controller reachability

Explanation

Correct Answer

B:

The architectural weakness is that the DHCP failure could occur before relay or after server response and needs packet-level isolation. It can be addressed through the controlled change to capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply.

Incorrect Answers

A:

The offered principle is: Missing or altered discovery frames can prevent automatic topology association. In the source material it is associated with: Missing or altered discovery frames can prevent automatic topology association. This case has a different controlling cause: The DHCP failure could occur before relay or after server response and needs packet-level isolation. Its keyed mechanism is: The DHCP failure could occur before relay or after server response and needs packet-level isolation.

C:

The offered principle is: User VLAN forwarding can survive while the specific controller management path is broken. In the source material it is associated with: User VLAN forwarding can survive while the specific controller management path is broken. This case has a different controlling cause: The DHCP failure could occur before relay or after server response and needs packet-level isolation. Its keyed mechanism is: The DHCP failure could occur before relay or after server response and needs packet-level isolation.

D:

Although fortiLink over Layer 3 requires functional routed controller reachability, the presented symptoms do not support that as the primary cause; they indicate that the DHCP failure could occur before relay or after server response and needs packet-level isolation. For the Dartwood branch IT department, the direct corrective action is to capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply.

Question 727

At the Dartwood branch IT department, a phone remains without an IP lease and administrators debate whether DHCP Discover reaches the server. What evidence would justify considering this concern addressed?

  1. The trace shows the last successful DHCP message and the boundary where response disappears
  2. Both members exchange compatible LACP parameters and become active
  3. Error counters correlate with the problem and stop increasing after repair
  4. The switch regains a stable controller session while user forwarding remains correct

Explanation

Correct Answer

A:

This tests the real business behavior: the trace shows the last successful DHCP message and the boundary where response disappears. It specifically checks whether the risk that the DHCP failure could occur before relay or after server response and needs packet-level isolation has been reduced.

Incorrect Answers

B:

The offered observation is: Both members exchange compatible LACP parameters and become active. It would support the separate mechanism: A physical link can stay up while LACP partner agreement remains incomplete. In this case the decisive dependency is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The original keyed verification is: The trace shows the last successful DHCP message and the boundary where response disappears.

C:

Error counters correlate with the problem and stop increasing after repair. That result would test a control for this other failure: An operational link can still drop or corrupt frames because of media or congestion. The question instead requires evidence for: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The direct outcome to verify is: The trace shows the last successful DHCP message and the boundary where response disappears.

D:

The offered observation is: The switch regains a stable controller session while user forwarding remains correct. It would support the separate mechanism: User VLAN forwarding can survive while the specific controller management path is broken. In this case the decisive dependency is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The original keyed verification is: The trace shows the last successful DHCP message and the boundary where response disappears.

Question 728

At the Dartwood branch IT department, a phone remains without an IP lease and administrators debate whether DHCP Discover reaches the server. How should the organization sustain the improvement?

  1. Retain a standard DHCP packet capture filter in troubleshooting runbooks
  2. Review capture resource limits and retention before high-volume diagnostics
  3. Trend optical health for critical uplinks
  4. Require FortiLink exception review before WAN NAT changes

Explanation

Correct Answer

A:

The team should retain a standard DHCP packet capture filter in troubleshooting runbooks. That recurring practice targets the same weakness, namely that the DHCP failure could occur before relay or after server response and needs packet-level isolation.

Incorrect Answers

B:

Review capture resource limits and retention before high-volume diagnostics. That safeguard would help prevent recurrence of: Broad captures can exhaust limited capture memory and omit useful packets. The risk being reviewed here is instead: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The matching ongoing control is: Retain a standard DHCP packet capture filter in troubleshooting runbooks.

C:

That routine supports fortiswitch optical diagnostics, but the relevant ongoing risk requires the team to retain a standard DHCP packet capture filter in troubleshooting runbooks. For the Dartwood branch IT department, the direct corrective action is to capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply.

D:

Require FortiLink exception review before WAN NAT changes. That safeguard would help prevent recurrence of: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The risk being reviewed here is instead: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The matching ongoing control is: Retain a standard DHCP packet capture filter in troubleshooting runbooks.

Question 729

At the Tarnbridge data network services firm, a desktop never enters its assigned VLAN and RADIUS logs contain no request for the affected connection. Which approach best resolves the described issue?

  1. Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode
  2. Inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately
  3. Capture EAPOL frames on the client-facing switch port before investigating server-side authorization
  4. Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path

Explanation

Correct Answer

C:

This solution addresses the stated limitation: missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. Implementing it means the team should capture EAPOL frames on the client-facing switch port before investigating server-side authorization, then verify that a controlled authentication shows EAPOL exchange at the port and a corresponding RADIUS attempt.

Incorrect Answers

A:

Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to capture EAPOL frames on the client-facing switch port before investigating server-side authorization. For the Tarnbridge data network services firm, the direct corrective action is to capture EAPOL frames on the client-facing switch port before investigating server-side authorization.

B:

The offered action is: Inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately. It is associated with this separate technical condition: Routing decisions depend on active installed routes and reachable next hops. The actual incident concerns a different dependency: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. The corresponding change is: Capture EAPOL frames on the client-facing switch port before investigating server-side authorization.

D:

Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path addresses a different kind of problem: no single data source proves whether frames were dropped locally or later by routing or firewall policy. Here the reported weakness is that missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. For the Tarnbridge data network services firm, the direct corrective action is to capture EAPOL frames on the client-facing switch port before investigating server-side authorization.

Question 730

At the Tarnbridge data network services firm, a desktop never enters its assigned VLAN and RADIUS logs contain no request for the affected connection. Which explanation best accounts for the concern?

  1. A rogue ARP sender can impersonate an IP address without changing DHCP lease records
  2. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS
  3. Controller discovery and authorization are separate stages of managed provisioning
  4. Routing decisions depend on active installed routes and reachable next hops

Explanation

Correct Answer

B:

The problem stems from the fact that missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. A correct solution would capture EAPOL frames on the client-facing switch port before investigating server-side authorization and check that a controlled authentication shows EAPOL exchange at the port and a corresponding RADIUS attempt.

Incorrect Answers

A:

The offered principle is: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. In the source material it is associated with: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. This case has a different controlling cause: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. Its keyed mechanism is: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS.

C:

The offered principle is: Controller discovery and authorization are separate stages of managed provisioning. In the source material it is associated with: Controller discovery and authorization are separate stages of managed provisioning. This case has a different controlling cause: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. Its keyed mechanism is: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS.

D:

Routing decisions depend on active installed routes and reachable next hops. That may occur elsewhere, but the evidence at the Tarnbridge data network services firm instead points to the fact that missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests