McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 75

Question 740

At the Stonehaven infrastructure service operator, a technician sees untagged traffic in an access-port capture and concludes the trunk is stripping every 802.1Q tag. How should the organization sustain the improvement?

  1. Remove mirrors and delete expired sensitive captures after each incident
  2. Record capture location when interpreting tagging evidence
  3. Alert on binding renewal failures when enabling anti-spoofing
  4. Monitor switch-controller process health and FortiLink sessions

Explanation

Correct Answer

B:

For the Stonehaven infrastructure service operator, this maintenance action preserves the fix: record capture location when interpreting tagging evidence. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Remove mirrors and delete expired sensitive captures after each incident. Its technical scope concerns: Network diagnostic captures may expose credentials or customer information unrelated to the incident. This question asks how to sustain control over: Access-port observations may not include tags that are present on inter-switch trunks. The more targeted safeguard is: Record capture location when interpreting tagging evidence.

C:

That routine supports fortiswitch dhcp snooping binding table, but the relevant ongoing risk requires the team to record capture location when interpreting tagging evidence. For the Stonehaven infrastructure service operator, the direct corrective action is to capture on the trunk or a supported mirrored path where VLAN tags should be visible.

D:

Monitor switch-controller process health and FortiLink sessions. That safeguard would help prevent recurrence of: A shared controller service problem can affect several managed devices at once. The risk being reviewed here is instead: Access-port observations may not include tags that are present on inter-switch trunks. The matching ongoing control is: Record capture location when interpreting tagging evidence.

Question 741

At the Goldport campus infrastructure group, a downstream switch is physically connected yet never appears as a FortiLink neighbor. Which approach best resolves the described issue?

  1. Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path
  2. Capture EAPOL frames on the client-facing switch port before investigating server-side authorization
  3. Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path
  4. Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link

Explanation

Correct Answer

A:

The reported facts support this change rather than a general platform replacement. The team should capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path because missing or altered discovery frames can prevent automatic topology association. A suitable test confirms that expected discovery frames are visible after the port-role or transport correction.

Incorrect Answers

B:

The offered action is: Capture EAPOL frames on the client-facing switch port before investigating server-side authorization. It is associated with this separate technical condition: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. The actual incident concerns a different dependency: Missing or altered discovery frames can prevent automatic topology association. The corresponding change is: Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path.

C:

This alternative would be suitable where no single data source proves whether frames were dropped locally or later by routing or firewall policy. It does not by itself resolve the need to capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path. For the Goldport campus infrastructure group, the direct corrective action is to capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path.

D:

Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link addresses a different kind of problem: routed FortiLink management does not transport a continuous VLAN data path between the sites. Here the reported weakness is that missing or altered discovery frames can prevent automatic topology association. For the Goldport campus infrastructure group, the direct corrective action is to capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path.

Question 742

At the Goldport campus infrastructure group, a downstream switch is physically connected yet never appears as a FortiLink neighbor. Which explanation best accounts for the concern?

  1. Broad captures can exhaust limited capture memory and omit useful packets
  2. Missing or altered discovery frames can prevent automatic topology association
  3. Routing decisions depend on active installed routes and reachable next hops
  4. Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone

Explanation

Correct Answer

B:

The problem stems from the fact that missing or altered discovery frames can prevent automatic topology association. A correct solution would capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path and check that expected discovery frames are visible after the port-role or transport correction.

Incorrect Answers

A:

The offered principle is: Broad captures can exhaust limited capture memory and omit useful packets. In the source material it is associated with: Broad captures can exhaust limited capture memory and omit useful packets. This case has a different controlling cause: Missing or altered discovery frames can prevent automatic topology association. Its keyed mechanism is: Missing or altered discovery frames can prevent automatic topology association.

C:

The offered principle is: Routing decisions depend on active installed routes and reachable next hops. In the source material it is associated with: Routing decisions depend on active installed routes and reachable next hops. This case has a different controlling cause: Missing or altered discovery frames can prevent automatic topology association. Its keyed mechanism is: Missing or altered discovery frames can prevent automatic topology association.

D:

Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. That may occur elsewhere, but the evidence at the Goldport campus infrastructure group instead points to the fact that missing or altered discovery frames can prevent automatic topology association.

Question 743

At the Goldport campus infrastructure group, a downstream switch is physically connected yet never appears as a FortiLink neighbor. Which test result best shows the requirement is met?

  1. Both members exchange compatible LACP parameters and become active
  2. Expected discovery frames are visible after the port-role or transport correction
  3. A timestamped test identifies the failing hop and matches its diagnostic evidence
  4. The correct switch serial is discovered after the FortiLink port path is repaired

Explanation

Correct Answer

B:

This is the relevant acceptance result: expected discovery frames are visible after the port-role or transport correction. It demonstrates the outcome of choosing to capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path.

Incorrect Answers

A:

Both members exchange compatible LACP parameters and become active. That result would test a control for this other failure: A physical link can stay up while LACP partner agreement remains incomplete. The question instead requires evidence for: Missing or altered discovery frames can prevent automatic topology association. The direct outcome to verify is: Expected discovery frames are visible after the port-role or transport correction.

C:

A timestamped test identifies the failing hop and matches its diagnostic evidence. That result would test a control for this other failure: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The question instead requires evidence for: Missing or altered discovery frames can prevent automatic topology association. The direct outcome to verify is: Expected discovery frames are visible after the port-role or transport correction.

D:

At the Goldport campus infrastructure group, a result about fortilink discovery physical path would not show that the team corrected the failure where missing or altered discovery frames can prevent automatic topology association.

Question 744

At the Goldport campus infrastructure group, a downstream switch is physically connected yet never appears as a FortiLink neighbor. Which ongoing control best prevents this issue from recurring?

  1. Collect baseline retransmission measurements for critical applications
  2. Require FortiLink exception review before WAN NAT changes
  3. Monitor discovery protocol changes after uplink moves
  4. Document Layer 3 island limitations in branch network designs

Explanation

Correct Answer

C:

After implementation, the team should monitor discovery protocol changes after uplink moves as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports tcp retransmission analysis, but the relevant ongoing risk requires the team to monitor discovery protocol changes after uplink moves. For the Goldport campus infrastructure group, the direct corrective action is to capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path.

B:

Require FortiLink exception review before WAN NAT changes. That safeguard would help prevent recurrence of: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The risk being reviewed here is instead: Missing or altered discovery frames can prevent automatic topology association. The matching ongoing control is: Monitor discovery protocol changes after uplink moves.

D:

Document Layer 3 island limitations in branch network designs. That safeguard would help prevent recurrence of: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The risk being reviewed here is instead: Missing or altered discovery frames can prevent automatic topology association. The matching ongoing control is: Monitor discovery protocol changes after uplink moves.

Question 745

At the Whitford network security team, a two-port aggregation forms only one member even though both fibers are lit. Which implementation choice best addresses the situation?

  1. Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path
  2. Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode
  3. Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch
  4. Check supported ring topology and loop prevention and isolate the failed links sequentially

Explanation

Correct Answer

B:

Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode is the best response because a physical link can stay up while LACP partner agreement remains incomplete. A focused validation would establish that both members exchange compatible LACP parameters and become active.

Incorrect Answers

A:

This alternative would be suitable where missing or altered discovery frames can prevent automatic topology association. It does not by itself resolve the need to capture or inspect LACPDU exchange on each intended member link before changing aggregation mode. For the Whitford network security team, the direct corrective action is to capture or inspect LACPDU exchange on each intended member link before changing aggregation mode.

C:

The option addresses the separate situation where an exhausted PoE power budget can interrupt otherwise healthy network links. For this case, the more appropriate response is to capture or inspect LACPDU exchange on each intended member link before changing aggregation mode. For the Whitford network security team, the direct corrective action is to capture or inspect LACPDU exchange on each intended member link before changing aggregation mode.

D:

The offered alternative is: Check supported ring topology and loop prevention and isolate the failed links sequentially. It addresses this separate failure mode: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. In the current case, the observed mechanism is: A physical link can stay up while LACP partner agreement remains incomplete. The keyed action, Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode., targets that condition more directly.

Question 746

At the Whitford network security team, a two-port aggregation forms only one member even though both fibers are lit. What risk should the team identify as the primary issue?

  1. Application slowness cannot be attributed to switching congestion without traffic-level evidence
  2. A physical link can stay up while LACP partner agreement remains incomplete
  3. Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets
  4. An intentionally standby split-interface link may not forward until failover

Explanation

Correct Answer

B:

This identifies the root issue: a physical link can stay up while LACP partner agreement remains incomplete. At the Whitford network security team, the team should therefore capture or inspect LACPDU exchange on each intended member link before changing aggregation mode.

Incorrect Answers

A:

The offered action is: Application slowness cannot be attributed to switching congestion without traffic-level evidence. It is associated with this separate technical condition: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The actual incident concerns a different dependency: A physical link can stay up while LACP partner agreement remains incomplete. The corresponding change is: A physical link can stay up while LACP partner agreement remains incomplete.

C:

The offered alternative is: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. It addresses this separate failure mode: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. In the current case, the observed mechanism is: A physical link can stay up while LACP partner agreement remains incomplete. The keyed action, A physical link can stay up while LACP partner agreement remains incomplete., targets that condition more directly.

D:

An intentionally standby split-interface link may not forward until failover. That is not the mechanism that accounts for the stated failure at the Whitford network security team.

Question 747

At the Whitford network security team, a two-port aggregation forms only one member even though both fibers are lit. What is the strongest acceptance test for this change?

  1. The intended endpoint frames appear with correct source and destination fields
  2. Local broadcasts remain isolated while approved routed application traffic succeeds
  3. The switch regains a stable controller session while user forwarding remains correct
  4. Both members exchange compatible LACP parameters and become active

Explanation

Correct Answer

D:

The intended correction is to capture or inspect LACPDU exchange on each intended member link before changing aggregation mode. The decisive verification is that both members exchange compatible LACP parameters and become active, rather than only confirming configuration was saved.

Incorrect Answers

A:

The intended endpoint frames appear with correct source and destination fields. That result would test a control for this other failure: A capture from the wrong interface cannot show the target packet path. The question instead requires evidence for: A physical link can stay up while LACP partner agreement remains incomplete. The direct outcome to verify is: Both members exchange compatible LACP parameters and become active.

B:

At the Whitford network security team, a result about fortilink island l2 span assumption would not show that the team corrected the failure where a physical link can stay up while LACP partner agreement remains incomplete.

C:

The switch regains a stable controller session while user forwarding remains correct. That result would test a control for this other failure: User VLAN forwarding can survive while the specific controller management path is broken. The question instead requires evidence for: A physical link can stay up while LACP partner agreement remains incomplete. The direct outcome to verify is: Both members exchange compatible LACP parameters and become active.

Question 748

At the Whitford network security team, a two-port aggregation forms only one member even though both fibers are lit. Which setting or practice should be reviewed in future?

  1. Confirm address and VLAN bindings at the start of a capture
  2. Record partner identifiers during link aggregation maintenance
  3. Audit management VLAN changes on inter-switch trunks
  4. Review route snapshots after gateway updates

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to record partner identifiers during link aggregation maintenance.

Incorrect Answers

A:

Confirm address and VLAN bindings at the start of a capture is not the primary recurring safeguard for this problem. The team should record partner identifiers during link aggregation maintenance. For the Whitford network security team, the direct corrective action is to capture or inspect LACPDU exchange on each intended member link before changing aggregation mode.

C:

The suggested preventive check is: Audit management VLAN changes on inter-switch trunks. Its technical scope concerns: User VLAN forwarding can survive while the specific controller management path is broken. This question asks how to sustain control over: A physical link can stay up while LACP partner agreement remains incomplete. The more targeted safeguard is: Record partner identifiers during link aggregation maintenance.

D:

Review route snapshots after gateway updates. That safeguard would help prevent recurrence of: Routing decisions depend on active installed routes and reachable next hops. The risk being reviewed here is instead: A physical link can stay up while LACP partner agreement remains incomplete. The matching ongoing control is: Record partner identifiers during link aggregation maintenance.

Question 749

At the Harborwick managed-network provider, a newly connected access switch causes topology changes and the team assumes no BPDUs are received. Which corrective action best meets the requirement?

  1. Create a supported packet-capture profile on the actual traffic-carrying physical or system interface
  2. Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink
  3. Check switch authorization state and approve the correct serial under site change control
  4. Clear the retired identity and authorize the replacement using the supported managed-switch procedure

Explanation

Correct Answer

B:

The primary failure mode is that missing or unexpected STP BPDUs affect safe root election and redundant-port states. The proposed action directly fixes it by requiring the team to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink; afterward, verify that the corrected uplink shows expected bridge control traffic and stable root state.

Incorrect Answers

A:

The option addresses the separate situation where a capture from the wrong interface cannot show the target packet path. For this case, the more appropriate response is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink. For the Harborwick managed-network provider, the direct corrective action is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

C:

Check switch authorization state and approve the correct serial under site change control can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink. For the Harborwick managed-network provider, the direct corrective action is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

D:

The offered alternative is: Clear the retired identity and authorize the replacement using the supported managed-switch procedure. It addresses this separate failure mode: Management associations are tied to switch serial identity and cannot be assumed transferable. In the current case, the observed mechanism is: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The keyed action, Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink., targets that condition more directly.

Question 750

At the Harborwick managed-network provider, a newly connected access switch causes topology changes and the team assumes no BPDUs are received. Which underlying issue most directly explains this situation?

  1. Missing or altered discovery frames can prevent automatic topology association
  2. A failed parent-child inter-switch link can isolate multiple downstream managed devices
  3. Missing or unexpected STP BPDUs affect safe root election and redundant-port states
  4. Management associations are tied to switch serial identity and cannot be assumed transferable

Explanation

Correct Answer

C:

The strongest explanation is that missing or unexpected STP BPDUs affect safe root election and redundant-port states. This accounts for the outcome and supports the action to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

Incorrect Answers

A:

The offered principle is: Missing or altered discovery frames can prevent automatic topology association. In the source material it is associated with: Missing or altered discovery frames can prevent automatic topology association. This case has a different controlling cause: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. Its keyed mechanism is: Missing or unexpected STP BPDUs affect safe root election and redundant-port states.

B:

A failed parent-child inter-switch link can isolate multiple downstream managed devices. That is not the mechanism that accounts for the stated failure at the Harborwick managed-network provider.

D:

Although management associations are tied to switch serial identity and cannot be assumed transferable, the presented symptoms do not support that as the primary cause; they indicate that missing or unexpected STP BPDUs affect safe root election and redundant-port states. For the Harborwick managed-network provider, the direct corrective action is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests