McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 77

Question 760

At the Lakehaven data network services firm, users blame FortiSwitch QoS for a slow application but no one has confirmed packet loss or retransmission. Which setting or practice should be reviewed in future?

  1. Confirm address and VLAN bindings at the start of a capture
  2. Monitor switch system resource trends during peak hours
  3. Collect baseline retransmission measurements for critical applications
  4. Record MAC movement information during desk-move incidents

Explanation

Correct Answer

C:

The team should collect baseline retransmission measurements for critical applications. That recurring practice targets the same weakness, namely that application slowness cannot be attributed to switching congestion without traffic-level evidence.

Incorrect Answers

A:

Confirm address and VLAN bindings at the start of a capture is not the primary recurring safeguard for this problem. The team should collect baseline retransmission measurements for critical applications. For the Lakehaven data network services firm, the direct corrective action is to capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters.

B:

Monitor switch system resource trends during peak hours. That safeguard would help prevent recurrence of: Control-plane resource contention can cause slow management and protocol updates without saturated data links. The risk being reviewed here is instead: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The matching ongoing control is: Collect baseline retransmission measurements for critical applications.

D:

Record MAC movement information during desk-move incidents. That safeguard would help prevent recurrence of: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The risk being reviewed here is instead: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The matching ongoing control is: Collect baseline retransmission measurements for critical applications.

Question 761

At the Westwick regional network integrator, a busy core switch capture fills the available buffer before the one problematic connection occurs. Which corrective action best meets the requirement?

  1. Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink
  2. Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface
  3. Apply narrow capture filters and reasonable sampling windows to the target traffic
  4. Restore approved bidirectional Layer 3 management routing between the island and FortiGate

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should apply narrow capture filters and reasonable sampling windows to the target traffic because broad captures can exhaust limited capture memory and omit useful packets. A suitable test confirms that the requested test conversation appears without an overflowed capture buffer.

Incorrect Answers

A:

The option addresses the separate situation where missing or unexpected STP BPDUs affect safe root election and redundant-port states. For this case, the more appropriate response is to apply narrow capture filters and reasonable sampling windows to the target traffic. For the Westwick regional network integrator, the direct corrective action is to apply narrow capture filters and reasonable sampling windows to the target traffic.

B:

The offered action is: Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface. It is associated with this separate technical condition: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The actual incident concerns a different dependency: Broad captures can exhaust limited capture memory and omit useful packets. The corresponding change is: Apply narrow capture filters and reasonable sampling windows to the target traffic.

D:

The offered alternative is: Restore approved bidirectional Layer 3 management routing between the island and FortiGate. It addresses this separate failure mode: FortiLink over Layer 3 requires functional routed controller reachability. In the current case, the observed mechanism is: Broad captures can exhaust limited capture memory and omit useful packets. The keyed action, Apply narrow capture filters and reasonable sampling windows to the target traffic., targets that condition more directly.

Question 762

At the Westwick regional network integrator, a busy core switch capture fills the available buffer before the one problematic connection occurs. Which underlying issue most directly explains this situation?

  1. A capture from the wrong interface cannot show the target packet path
  2. A filter with no matching hits may be incorrectly ordered attached or classified
  3. Broad captures can exhaust limited capture memory and omit useful packets
  4. Routing decisions depend on active installed routes and reachable next hops

Explanation

Correct Answer

C:

The strongest explanation is that broad captures can exhaust limited capture memory and omit useful packets. This accounts for the outcome and supports the action to apply narrow capture filters and reasonable sampling windows to the target traffic.

Incorrect Answers

A:

The offered principle is: A capture from the wrong interface cannot show the target packet path. In the source material it is associated with: A capture from the wrong interface cannot show the target packet path. This case has a different controlling cause: Broad captures can exhaust limited capture memory and omit useful packets. Its keyed mechanism is: Broad captures can exhaust limited capture memory and omit useful packets.

B:

A filter with no matching hits may be incorrectly ordered attached or classified. That is not the mechanism that accounts for the stated failure at the Westwick regional network integrator.

D:

Although routing decisions depend on active installed routes and reachable next hops, the presented symptoms do not support that as the primary cause; they indicate that broad captures can exhaust limited capture memory and omit useful packets. For the Westwick regional network integrator, the direct corrective action is to apply narrow capture filters and reasonable sampling windows to the target traffic.

Question 763

At the Westwick regional network integrator, a busy core switch capture fills the available buffer before the one problematic connection occurs. What evidence would justify considering this concern addressed?

  1. The trace and counters isolate the actual loss point or disprove a switch fault
  2. The correct intended route is installed and a traceroute follows it
  3. The requested test conversation appears without an overflowed capture buffer
  4. A pilot switch reconnects reliably after moving to a documented supported release combination

Explanation

Correct Answer

C:

At the Westwick regional network integrator, evidence that the requested test conversation appears without an overflowed capture buffer directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The trace and counters isolate the actual loss point or disprove a switch fault. That result would test a control for this other failure: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The question instead requires evidence for: Broad captures can exhaust limited capture memory and omit useful packets. The direct outcome to verify is: The requested test conversation appears without an overflowed capture buffer.

B:

The offered observation is: The correct intended route is installed and a traceroute follows it. It would support the separate mechanism: Routing decisions depend on active installed routes and reachable next hops. In this case the decisive dependency is: Broad captures can exhaust limited capture memory and omit useful packets. The original keyed verification is: The requested test conversation appears without an overflowed capture buffer.

D:

The offered observation is: A pilot switch reconnects reliably after moving to a documented supported release combination. It would support the separate mechanism: An incompatible controller and switch software combination can disrupt FortiLink management. In this case the decisive dependency is: Broad captures can exhaust limited capture memory and omit useful packets. The original keyed verification is: The requested test conversation appears without an overflowed capture buffer.

Question 764

At the Westwick regional network integrator, a busy core switch capture fills the available buffer before the one problematic connection occurs. How should the organization sustain the improvement?

  1. Collect baseline retransmission measurements for critical applications
  2. Review capture resource limits and retention before high-volume diagnostics
  3. Use the switch diagnostics pane during triage before reboot requests
  4. Update site serial inventory with every RMA

Explanation

Correct Answer

B:

For the Westwick regional network integrator, this maintenance action preserves the fix: review capture resource limits and retention before high-volume diagnostics. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Collect baseline retransmission measurements for critical applications. Its technical scope concerns: Application slowness cannot be attributed to switching congestion without traffic-level evidence. This question asks how to sustain control over: Broad captures can exhaust limited capture memory and omit useful packets. The more targeted safeguard is: Review capture resource limits and retention before high-volume diagnostics.

C:

That routine supports managed fortiswitch diagnostics pane, but the relevant ongoing risk requires the team to review capture resource limits and retention before high-volume diagnostics. For the Westwick regional network integrator, the direct corrective action is to apply narrow capture filters and reasonable sampling windows to the target traffic.

D:

Update site serial inventory with every RMA. That safeguard would help prevent recurrence of: Management associations are tied to switch serial identity and cannot be assumed transferable. The risk being reviewed here is instead: Broad captures can exhaust limited capture memory and omit useful packets. The matching ongoing control is: Review capture resource limits and retention before high-volume diagnostics.

Question 765

At the Kingsford multisite IT support team, an analyst mirrors production traffic to a temporary laptop without restricting captured sensitive conversations. Which approach best resolves the described issue?

  1. Capture on the trunk or a supported mirrored path where VLAN tags should be visible
  2. Use approved time-limited packet capture and mirroring scope with secured evidence storage
  3. Confirm enabled FortiLink split-interface behavior and its supported active standby design
  4. Use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state

Explanation

Correct Answer

B:

For the Kingsford multisite IT support team, the appropriate correction is to use approved time-limited packet capture and mirroring scope with secured evidence storage. The decisive reason is that network diagnostic captures may expose credentials or customer information unrelated to the incident; acceptance evidence is that the trace contains only necessary metadata or approved payload and is stored under access controls.

Incorrect Answers

A:

Capture on the trunk or a supported mirrored path where VLAN tags should be visible can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use approved time-limited packet capture and mirroring scope with secured evidence storage. For the Kingsford multisite IT support team, the direct corrective action is to use approved time-limited packet capture and mirroring scope with secured evidence storage.

C:

This alternative would be suitable where an intentionally standby split-interface link may not forward until failover. It does not by itself resolve the need to use approved time-limited packet capture and mirroring scope with secured evidence storage. For the Kingsford multisite IT support team, the direct corrective action is to use approved time-limited packet capture and mirroring scope with secured evidence storage.

D:

Use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state addresses a different kind of problem: controller-side diagnostic information can distinguish authorization management and link problems. Here the reported weakness is that network diagnostic captures may expose credentials or customer information unrelated to the incident. For the Kingsford multisite IT support team, the direct corrective action is to use approved time-limited packet capture and mirroring scope with secured evidence storage.

Question 766

At the Kingsford multisite IT support team, an analyst mirrors production traffic to a temporary laptop without restricting captured sensitive conversations. Which explanation best accounts for the concern?

  1. Network diagnostic captures may expose credentials or customer information unrelated to the incident
  2. A capture from the wrong interface cannot show the target packet path
  3. A shared controller service problem can affect several managed devices at once
  4. Routed FortiLink management does not transport a continuous VLAN data path between the sites

Explanation

Correct Answer

A:

The strongest explanation is that network diagnostic captures may expose credentials or customer information unrelated to the incident. This accounts for the outcome and supports the action to use approved time-limited packet capture and mirroring scope with secured evidence storage.

Incorrect Answers

B:

Although a capture from the wrong interface cannot show the target packet path, the presented symptoms do not support that as the primary cause; they indicate that network diagnostic captures may expose credentials or customer information unrelated to the incident. For the Kingsford multisite IT support team, the direct corrective action is to use approved time-limited packet capture and mirroring scope with secured evidence storage.

C:

The offered principle is: A shared controller service problem can affect several managed devices at once. In the source material it is associated with: A shared controller service problem can affect several managed devices at once. This case has a different controlling cause: Network diagnostic captures may expose credentials or customer information unrelated to the incident. Its keyed mechanism is: Network diagnostic captures may expose credentials or customer information unrelated to the incident.

D:

Routed FortiLink management does not transport a continuous VLAN data path between the sites. That may occur elsewhere, but the evidence at the Kingsford multisite IT support team instead points to the fact that network diagnostic captures may expose credentials or customer information unrelated to the incident.

Question 767

At the Kingsford multisite IT support team, an analyst mirrors production traffic to a temporary laptop without restricting captured sensitive conversations. Which test result best shows the requirement is met?

  1. Both members exchange compatible LACP parameters and become active
  2. A seeded blocked flow increments the expected rule and does not reach the service
  3. A peak-load test shows adequate watts for the critical access points
  4. The trace contains only necessary metadata or approved payload and is stored under access controls

Explanation

Correct Answer

D:

The team can confirm the fix by showing that the trace contains only necessary metadata or approved payload and is stored under access controls. This aligns with the corrective design to use approved time-limited packet capture and mirroring scope with secured evidence storage.

Incorrect Answers

A:

Both members exchange compatible LACP parameters and become active. That result would test a control for this other failure: A physical link can stay up while LACP partner agreement remains incomplete. The question instead requires evidence for: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The direct outcome to verify is: The trace contains only necessary metadata or approved payload and is stored under access controls.

B:

The offered observation is: A seeded blocked flow increments the expected rule and does not reach the service. It would support the separate mechanism: A filter with no matching hits may be incorrectly ordered attached or classified. In this case the decisive dependency is: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The original keyed verification is: The trace contains only necessary metadata or approved payload and is stored under access controls.

C:

A peak-load test shows adequate watts for the critical access points. That result would test a control for this other failure: An exhausted PoE power budget can interrupt otherwise healthy network links. The question instead requires evidence for: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The direct outcome to verify is: The trace contains only necessary metadata or approved payload and is stored under access controls.

Question 768

At the Kingsford multisite IT support team, an analyst mirrors production traffic to a temporary laptop without restricting captured sensitive conversations. Which ongoing control best prevents this issue from recurring?

  1. Include EAPOL trace validation in wired-authentication incident templates
  2. Retest FortiLink status after HA membership changes
  3. Remove mirrors and delete expired sensitive captures after each incident
  4. Run cable diagnostics after repeated CRC incidents

Explanation

Correct Answer

C:

After implementation, the team should remove mirrors and delete expired sensitive captures after each incident as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports 802.1x eapol trace, but the relevant ongoing risk requires the team to remove mirrors and delete expired sensitive captures after each incident. For the Kingsford multisite IT support team, the direct corrective action is to use approved time-limited packet capture and mirroring scope with secured evidence storage.

B:

Retest FortiLink status after HA membership changes. That safeguard would help prevent recurrence of: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The risk being reviewed here is instead: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The matching ongoing control is: Remove mirrors and delete expired sensitive captures after each incident.

D:

Run cable diagnostics after repeated CRC incidents. That safeguard would help prevent recurrence of: Copper faults can affect negotiation independently of Layer 2 configuration. The risk being reviewed here is instead: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The matching ongoing control is: Remove mirrors and delete expired sensitive captures after each incident.

Question 769

At the Yorkport campus infrastructure group, a user VLAN reaches a FortiGate firewall but FortiGate capture shows no return packets and engineers only sniff the access edge. Which implementation choice best addresses the situation?

  1. Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode
  2. Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair
  3. Capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding
  4. Validate supported FortiLink HA topology and both members' management uplink connectivity

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding. The observed risk is that a single vantage point cannot prove where the bidirectional packet path failed; a passing acceptance check would show that matching timestamps isolate whether forward or return traffic disappears at the firewall boundary.

Incorrect Answers

A:

This alternative would be suitable where a physical link can stay up while LACP partner agreement remains incomplete. It does not by itself resolve the need to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding. For the Yorkport campus infrastructure group, the direct corrective action is to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding.

B:

Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair addresses a different kind of problem: broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. Here the reported weakness is that a single vantage point cannot prove where the bidirectional packet path failed. For the Yorkport campus infrastructure group, the direct corrective action is to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding.

D:

The offered alternative is: Validate supported FortiLink HA topology and both members' management uplink connectivity. It addresses this separate failure mode: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. In the current case, the observed mechanism is: A single vantage point cannot prove where the bidirectional packet path failed. The keyed action, Capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding., targets that condition more directly.

Question 770

At the Yorkport campus infrastructure group, a user VLAN reaches a FortiGate firewall but FortiGate capture shows no return packets and engineers only sniff the access edge. What risk should the team identify as the primary issue?

  1. A single vantage point cannot prove where the bidirectional packet path failed
  2. An overly narrow or outdated filter can hide valid traffic from the analyst
  3. Controller discovery and authorization are separate stages of managed provisioning
  4. An operational link can still drop or corrupt frames because of media or congestion

Explanation

Correct Answer

A:

The situation shows that a single vantage point cannot prove where the bidirectional packet path failed, rather than merely a monitoring or presentation issue. Remediation is to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding.

Incorrect Answers

B:

An overly narrow or outdated filter can hide valid traffic from the analyst. That may occur elsewhere, but the evidence at the Yorkport campus infrastructure group instead points to the fact that a single vantage point cannot prove where the bidirectional packet path failed.

C:

The offered alternative is: Controller discovery and authorization are separate stages of managed provisioning. It addresses this separate failure mode: Controller discovery and authorization are separate stages of managed provisioning. In the current case, the observed mechanism is: A single vantage point cannot prove where the bidirectional packet path failed. The keyed action, A single vantage point cannot prove where the bidirectional packet path failed., targets that condition more directly.

D:

An operational link can still drop or corrupt frames because of media or congestion. That is not the mechanism that accounts for the stated failure at the Yorkport campus infrastructure group.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests