McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 78

Question 770

At the Yorkport campus infrastructure group, a user VLAN reaches a FortiGate firewall but FortiGate capture shows no return packets and engineers only sniff the access edge. What risk should the team identify as the primary issue?

  1. A single vantage point cannot prove where the bidirectional packet path failed
  2. An overly narrow or outdated filter can hide valid traffic from the analyst
  3. Controller discovery and authorization are separate stages of managed provisioning
  4. An operational link can still drop or corrupt frames because of media or congestion

Explanation

Correct Answer

A:

The situation shows that a single vantage point cannot prove where the bidirectional packet path failed, rather than merely a monitoring or presentation issue. Remediation is to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding.

Incorrect Answers

B:

An overly narrow or outdated filter can hide valid traffic from the analyst. That may occur elsewhere, but the evidence at the Yorkport campus infrastructure group instead points to the fact that a single vantage point cannot prove where the bidirectional packet path failed.

C:

The offered alternative is: Controller discovery and authorization are separate stages of managed provisioning. It addresses this separate failure mode: Controller discovery and authorization are separate stages of managed provisioning. In the current case, the observed mechanism is: A single vantage point cannot prove where the bidirectional packet path failed. The keyed action, A single vantage point cannot prove where the bidirectional packet path failed., targets that condition more directly.

D:

An operational link can still drop or corrupt frames because of media or congestion. That is not the mechanism that accounts for the stated failure at the Yorkport campus infrastructure group.

Question 771

At the Yorkport campus infrastructure group, a user VLAN reaches a FortiGate firewall but FortiGate capture shows no return packets and engineers only sniff the access edge. What is the strongest acceptance test for this change?

  1. The intended endpoint frames appear with correct source and destination fields
  2. Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary
  3. Local broadcasts remain isolated while approved routed application traffic succeeds
  4. The diagnostic output identifies the intended member and its control-plane state

Explanation

Correct Answer

B:

The team can confirm the fix by showing that matching timestamps isolate whether forward or return traffic disappears at the firewall boundary. This aligns with the corrective design to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding.

Incorrect Answers

A:

The intended endpoint frames appear with correct source and destination fields. That result would test a control for this other failure: A capture from the wrong interface cannot show the target packet path. The question instead requires evidence for: A single vantage point cannot prove where the bidirectional packet path failed. The direct outcome to verify is: Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary.

C:

Local broadcasts remain isolated while approved routed application traffic succeeds. That result would test a control for this other failure: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The question instead requires evidence for: A single vantage point cannot prove where the bidirectional packet path failed. The direct outcome to verify is: Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary.

D:

The offered observation is: The diagnostic output identifies the intended member and its control-plane state. It would support the separate mechanism: Controller-side diagnostic information can distinguish authorization management and link problems. In this case the decisive dependency is: A single vantage point cannot prove where the bidirectional packet path failed. The original keyed verification is: Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary.

Question 772

At the Yorkport campus infrastructure group, a user VLAN reaches a FortiGate firewall but FortiGate capture shows no return packets and engineers only sniff the access edge. Which setting or practice should be reviewed in future?

  1. Check trusted NTP status before distributed capture sessions
  2. Review route snapshots after gateway updates
  3. Monitor switch-controller process health and FortiLink sessions
  4. Maintain capture-point maps for managed FortiSwitch traffic flows

Explanation

Correct Answer

D:

For the Yorkport campus infrastructure group, this maintenance action preserves the fix: maintain capture-point maps for managed FortiSwitch traffic flows. It should be revisited as the workload evolves.

Incorrect Answers

A:

Check trusted NTP status before distributed capture sessions is not the primary recurring safeguard for this problem. The team should maintain capture-point maps for managed FortiSwitch traffic flows. For the Yorkport campus infrastructure group, the direct corrective action is to capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding.

B:

Review route snapshots after gateway updates. That safeguard would help prevent recurrence of: Routing decisions depend on active installed routes and reachable next hops. The risk being reviewed here is instead: A single vantage point cannot prove where the bidirectional packet path failed. The matching ongoing control is: Maintain capture-point maps for managed FortiSwitch traffic flows.

C:

The suggested preventive check is: Monitor switch-controller process health and FortiLink sessions. Its technical scope concerns: A shared controller service problem can affect several managed devices at once. This question asks how to sustain control over: A single vantage point cannot prove where the bidirectional packet path failed. The more targeted safeguard is: Maintain capture-point maps for managed FortiSwitch traffic flows.

Question 773

At the Nortonwood network security team, two network captures disagree about packet order during an intermittent FortiLink disconnection. Which corrective action best meets the requirement?

  1. Synchronize switch and FortiGate clocks before correlating packet-capture events
  2. Capture ARP requests and responses at the affected VLAN while consulting trusted binding data
  3. Inspect current DHCP snooping dynamic bindings and source guard association for the affected port
  4. Inspect system CPU memory and management-process health using supported diagnostics

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: synchronize switch and FortiGate clocks before correlating packet-capture events. The observed risk is that unsynchronized device clocks can make a correct event sequence appear contradictory; a passing acceptance check would show that a known test exchange has matching event order across both capture sources.

Incorrect Answers

B:

The offered action is: Capture ARP requests and responses at the affected VLAN while consulting trusted binding data. It is associated with this separate technical condition: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. The actual incident concerns a different dependency: Unsynchronized device clocks can make a correct event sequence appear contradictory. The corresponding change is: Synchronize switch and FortiGate clocks before correlating packet-capture events.

C:

Inspect current DHCP snooping dynamic bindings and source guard association for the affected port can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to synchronize switch and FortiGate clocks before correlating packet-capture events. For the Nortonwood network security team, the direct corrective action is to synchronize switch and FortiGate clocks before correlating packet-capture events.

D:

The offered alternative is: Inspect system CPU memory and management-process health using supported diagnostics. It addresses this separate failure mode: Control-plane resource contention can cause slow management and protocol updates without saturated data links. In the current case, the observed mechanism is: Unsynchronized device clocks can make a correct event sequence appear contradictory. The keyed action, Synchronize switch and FortiGate clocks before correlating packet-capture events., targets that condition more directly.

Question 774

At the Nortonwood network security team, two network captures disagree about packet order during an intermittent FortiLink disconnection. Which underlying issue most directly explains this situation?

  1. A physical link can stay up while LACP partner agreement remains incomplete
  2. Routed FortiLink management does not transport a continuous VLAN data path between the sites
  3. Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding
  4. Unsynchronized device clocks can make a correct event sequence appear contradictory

Explanation

Correct Answer

D:

The problem stems from the fact that unsynchronized device clocks can make a correct event sequence appear contradictory. A correct solution would synchronize switch and FortiGate clocks before correlating packet-capture events and check that a known test exchange has matching event order across both capture sources.

Incorrect Answers

A:

The offered principle is: A physical link can stay up while LACP partner agreement remains incomplete. In the source material it is associated with: A physical link can stay up while LACP partner agreement remains incomplete. This case has a different controlling cause: Unsynchronized device clocks can make a correct event sequence appear contradictory. Its keyed mechanism is: Unsynchronized device clocks can make a correct event sequence appear contradictory.

B:

Routed FortiLink management does not transport a continuous VLAN data path between the sites. That is not the mechanism that accounts for the stated failure at the Nortonwood network security team.

C:

The offered principle is: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. In the source material it is associated with: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. This case has a different controlling cause: Unsynchronized device clocks can make a correct event sequence appear contradictory. Its keyed mechanism is: Unsynchronized device clocks can make a correct event sequence appear contradictory.

Question 775

At the Nortonwood network security team, two network captures disagree about packet order during an intermittent FortiLink disconnection. What evidence would justify considering this concern addressed?

  1. The trunk capture shows the expected VLAN IDs for the test service
  2. The current endpoint MAC appears on the newly cabled approved port
  3. The switch regains a stable controller session while user forwarding remains correct
  4. A known test exchange has matching event order across both capture sources

Explanation

Correct Answer

D:

This is the relevant acceptance result: a known test exchange has matching event order across both capture sources. It demonstrates the outcome of choosing to synchronize switch and FortiGate clocks before correlating packet-capture events.

Incorrect Answers

A:

The trunk capture shows the expected VLAN IDs for the test service. That result would test a control for this other failure: Access-port observations may not include tags that are present on inter-switch trunks. The question instead requires evidence for: Unsynchronized device clocks can make a correct event sequence appear contradictory. The direct outcome to verify is: A known test exchange has matching event order across both capture sources.

B:

The offered observation is: The current endpoint MAC appears on the newly cabled approved port. It would support the separate mechanism: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. In this case the decisive dependency is: Unsynchronized device clocks can make a correct event sequence appear contradictory. The original keyed verification is: A known test exchange has matching event order across both capture sources.

C:

The switch regains a stable controller session while user forwarding remains correct. That result would test a control for this other failure: User VLAN forwarding can survive while the specific controller management path is broken. The question instead requires evidence for: Unsynchronized device clocks can make a correct event sequence appear contradictory. The direct outcome to verify is: A known test exchange has matching event order across both capture sources.

Question 776

At the Nortonwood network security team, two network captures disagree about packet order during an intermittent FortiLink disconnection. How should the organization sustain the improvement?

  1. Confirm address and VLAN bindings at the start of a capture
  2. Check trusted NTP status before distributed capture sessions
  3. Alert on binding renewal failures when enabling anti-spoofing
  4. Retest FortiLink status after HA membership changes

Explanation

Correct Answer

B:

For the Nortonwood network security team, this maintenance action preserves the fix: check trusted NTP status before distributed capture sessions. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Confirm address and VLAN bindings at the start of a capture. Its technical scope concerns: An overly narrow or outdated filter can hide valid traffic from the analyst. This question asks how to sustain control over: Unsynchronized device clocks can make a correct event sequence appear contradictory. The more targeted safeguard is: Check trusted NTP status before distributed capture sessions.

C:

That routine supports fortiswitch dhcp snooping binding table, but the relevant ongoing risk requires the team to check trusted NTP status before distributed capture sessions. For the Nortonwood network security team, the direct corrective action is to synchronize switch and FortiGate clocks before correlating packet-capture events.

D:

Retest FortiLink status after HA membership changes. That safeguard would help prevent recurrence of: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The risk being reviewed here is instead: Unsynchronized device clocks can make a correct event sequence appear contradictory. The matching ongoing control is: Check trusted NTP status before distributed capture sessions.

Question 777

At the Northport managed-network provider, an engineer creates a packet capture filter for a retired endpoint IP and concludes the FortiSwitch forwards nothing. Which approach best resolves the described issue?

  1. Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path
  2. Check supported ring topology and loop prevention and isolate the failed links sequentially
  3. Read supported ACL hit counters and policy attachment scope for the target packet path
  4. Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault

Explanation

Correct Answer

D:

Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault is the best response because an overly narrow or outdated filter can hide valid traffic from the analyst. A focused validation would establish that the same test connection becomes visible with corrected filter parameters.

Incorrect Answers

A:

Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

B:

The offered action is: Check supported ring topology and loop prevention and isolate the failed links sequentially. It is associated with this separate technical condition: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The actual incident concerns a different dependency: An overly narrow or outdated filter can hide valid traffic from the analyst. The corresponding change is: Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

C:

This alternative would be suitable where a filter with no matching hits may be incorrectly ordered attached or classified. It does not by itself resolve the need to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

Question 778

At the Northport managed-network provider, an engineer creates a packet capture filter for a retired endpoint IP and concludes the FortiSwitch forwards nothing. Which explanation best accounts for the concern?

  1. A single vantage point cannot prove where the bidirectional packet path failed
  2. Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone
  3. An overly narrow or outdated filter can hide valid traffic from the analyst
  4. An exhausted PoE power budget can interrupt otherwise healthy network links

Explanation

Correct Answer

C:

The situation shows that an overly narrow or outdated filter can hide valid traffic from the analyst, rather than merely a monitoring or presentation issue. Remediation is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

Incorrect Answers

A:

The offered principle is: A single vantage point cannot prove where the bidirectional packet path failed. In the source material it is associated with: A single vantage point cannot prove where the bidirectional packet path failed. This case has a different controlling cause: An overly narrow or outdated filter can hide valid traffic from the analyst. Its keyed mechanism is: An overly narrow or outdated filter can hide valid traffic from the analyst.

B:

Although layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone, the presented symptoms do not support that as the primary cause; they indicate that an overly narrow or outdated filter can hide valid traffic from the analyst. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

D:

An exhausted PoE power budget can interrupt otherwise healthy network links. That may occur elsewhere, but the evidence at the Northport managed-network provider instead points to the fact that an overly narrow or outdated filter can hide valid traffic from the analyst.

Question 779

At the Northport managed-network provider, an engineer creates a packet capture filter for a retired endpoint IP and concludes the FortiSwitch forwards nothing. Which test result best shows the requirement is met?

  1. A controlled authentication shows EAPOL exchange at the port and a corresponding RADIUS attempt
  2. The same test connection becomes visible with corrected filter parameters
  3. The correct renewed lease binding appears and legitimate traffic passes
  4. A peak-load test shows adequate watts for the critical access points

Explanation

Correct Answer

B:

This is the relevant acceptance result: the same test connection becomes visible with corrected filter parameters. It demonstrates the outcome of choosing to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

Incorrect Answers

A:

A controlled authentication shows EAPOL exchange at the port and a corresponding RADIUS attempt. That result would test a control for this other failure: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. The question instead requires evidence for: An overly narrow or outdated filter can hide valid traffic from the analyst. The direct outcome to verify is: The same test connection becomes visible with corrected filter parameters.

C:

The correct renewed lease binding appears and legitimate traffic passes. That result would test a control for this other failure: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. The question instead requires evidence for: An overly narrow or outdated filter can hide valid traffic from the analyst. The direct outcome to verify is: The same test connection becomes visible with corrected filter parameters.

D:

At the Northport managed-network provider, a result about fortiswitch poe telemetry would not show that the team corrected the failure where an overly narrow or outdated filter can hide valid traffic from the analyst.

Question 780

At the Northport managed-network provider, an engineer creates a packet capture filter for a retired endpoint IP and concludes the FortiSwitch forwards nothing. Which ongoing control best prevents this issue from recurring?

  1. Collect baseline retransmission measurements for critical applications
  2. Confirm address and VLAN bindings at the start of a capture
  3. Test upgrade compatibility in a staging environment first
  4. Audit management VLAN changes on inter-switch trunks

Explanation

Correct Answer

B:

The needed prevention is to confirm address and VLAN bindings at the start of a capture. It directly sustains the original change to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

Incorrect Answers

A:

That routine supports tcp retransmission analysis, but the relevant ongoing risk requires the team to confirm address and VLAN bindings at the start of a capture. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

C:

Test upgrade compatibility in a staging environment first is not the primary recurring safeguard for this problem. The team should confirm address and VLAN bindings at the start of a capture. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

D:

Audit management VLAN changes on inter-switch trunks. That safeguard would help prevent recurrence of: User VLAN forwarding can survive while the specific controller management path is broken. The risk being reviewed here is instead: An overly narrow or outdated filter can hide valid traffic from the analyst. The matching ongoing control is: Confirm address and VLAN bindings at the start of a capture.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests