McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 80

Question 790

At the Quayside regional network integrator, switch uplinks carry user data but the FortiGate cannot manage the switch after a VLAN change. Which explanation best accounts for the concern?

  1. Power state alone cannot prove the management discovery path is physically or logically available
  2. User VLAN forwarding can survive while the specific controller management path is broken
  3. Application slowness cannot be attributed to switching congestion without traffic-level evidence
  4. A capture from the wrong interface cannot show the target packet path

Explanation

Correct Answer

B:

The problem stems from the fact that user VLAN forwarding can survive while the specific controller management path is broken. A correct solution would restore the approved FortiLink management VLAN reachability and trunk membership and check that the switch regains a stable controller session while user forwarding remains correct.

Incorrect Answers

A:

The offered principle is: Power state alone cannot prove the management discovery path is physically or logically available. In the source material it is associated with: Power state alone cannot prove the management discovery path is physically or logically available. This case has a different controlling cause: User VLAN forwarding can survive while the specific controller management path is broken. Its keyed mechanism is: User VLAN forwarding can survive while the specific controller management path is broken.

C:

The offered principle is: Application slowness cannot be attributed to switching congestion without traffic-level evidence. In the source material it is associated with: Application slowness cannot be attributed to switching congestion without traffic-level evidence. This case has a different controlling cause: User VLAN forwarding can survive while the specific controller management path is broken. Its keyed mechanism is: User VLAN forwarding can survive while the specific controller management path is broken.

D:

A capture from the wrong interface cannot show the target packet path. That may occur elsewhere, but the evidence at the Quayside regional network integrator instead points to the fact that user VLAN forwarding can survive while the specific controller management path is broken.

Question 791

At the Quayside regional network integrator, switch uplinks carry user data but the FortiGate cannot manage the switch after a VLAN change. Which test result best shows the requirement is met?

  1. The switch regains a stable controller session while user forwarding remains correct
  2. The downstream switch is rediscovered and the neighbor table records its port
  3. The affected port and its state are identified under the expected switch serial
  4. The measured optic value returns to a supported range after component repair

Explanation

Correct Answer

A:

At the Quayside regional network integrator, evidence that the switch regains a stable controller session while user forwarding remains correct directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: The downstream switch is rediscovered and the neighbor table records its port. It would support the separate mechanism: The controller cannot build its intended neighbor map if required discovery frames are suppressed. In this case the decisive dependency is: User VLAN forwarding can survive while the specific controller management path is broken. The original keyed verification is: The switch regains a stable controller session while user forwarding remains correct.

C:

The affected port and its state are identified under the expected switch serial. That result would test a control for this other failure: A general firewall health summary omits per-switch physical and managed-port details. The question instead requires evidence for: User VLAN forwarding can survive while the specific controller management path is broken. The direct outcome to verify is: The switch regains a stable controller session while user forwarding remains correct.

D:

At the Quayside regional network integrator, a result about fortiswitch optical diagnostics would not show that the team corrected the failure where user VLAN forwarding can survive while the specific controller management path is broken.

Question 792

At the Quayside regional network integrator, switch uplinks carry user data but the FortiGate cannot manage the switch after a VLAN change. Which ongoing control best prevents this issue from recurring?

  1. Monitor switch-controller process health and FortiLink sessions
  2. Maintain capture-point maps for managed FortiSwitch traffic flows
  3. Track PoE capacity alarms whenever new devices are powered
  4. Audit management VLAN changes on inter-switch trunks

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to audit management VLAN changes on inter-switch trunks.

Incorrect Answers

A:

That routine supports fortilink switch controller service health, but the relevant ongoing risk requires the team to audit management VLAN changes on inter-switch trunks. For the Quayside regional network integrator, the direct corrective action is to restore the approved FortiLink management VLAN reachability and trunk membership.

B:

Maintain capture-point maps for managed FortiSwitch traffic flows. That safeguard would help prevent recurrence of: A single vantage point cannot prove where the bidirectional packet path failed. The risk being reviewed here is instead: User VLAN forwarding can survive while the specific controller management path is broken. The matching ongoing control is: Audit management VLAN changes on inter-switch trunks.

C:

Track PoE capacity alarms whenever new devices are powered is not the primary recurring safeguard for this problem. The team should audit management VLAN changes on inter-switch trunks. For the Quayside regional network integrator, the direct corrective action is to restore the approved FortiLink management VLAN reachability and trunk membership.

Question 793

At the Cedarport multisite IT support team, a FortiGate split interface shows one standby link inactive and staff plan to replace a healthy transceiver. Which implementation choice best addresses the situation?

  1. Check supported ring topology and loop prevention and isolate the failed links sequentially
  2. Confirm enabled FortiLink split-interface behavior and its supported active standby design
  3. Inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately
  4. Apply narrow capture filters and reasonable sampling windows to the target traffic

Explanation

Correct Answer

B:

Confirm enabled FortiLink split-interface behavior and its supported active standby design is the best response because an intentionally standby split-interface link may not forward until failover. A focused validation would establish that disconnecting the active path activates the intended standby and preserves management.

Incorrect Answers

A:

This alternative would be suitable where a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. It does not by itself resolve the need to confirm enabled FortiLink split-interface behavior and its supported active standby design. For the Cedarport multisite IT support team, the direct corrective action is to confirm enabled FortiLink split-interface behavior and its supported active standby design.

C:

The option addresses the separate situation where routing decisions depend on active installed routes and reachable next hops. For this case, the more appropriate response is to confirm enabled FortiLink split-interface behavior and its supported active standby design. For the Cedarport multisite IT support team, the direct corrective action is to confirm enabled FortiLink split-interface behavior and its supported active standby design.

D:

The offered alternative is: Apply narrow capture filters and reasonable sampling windows to the target traffic. It addresses this separate failure mode: Broad captures can exhaust limited capture memory and omit useful packets. In the current case, the observed mechanism is: An intentionally standby split-interface link may not forward until failover. The keyed action, Confirm enabled FortiLink split-interface behavior and its supported active standby design., targets that condition more directly.

Question 794

At the Cedarport multisite IT support team, a FortiGate split interface shows one standby link inactive and staff plan to replace a healthy transceiver. What risk should the team identify as the primary issue?

  1. Routed FortiLink management does not transport a continuous VLAN data path between the sites
  2. Application slowness cannot be attributed to switching congestion without traffic-level evidence
  3. A capture from the wrong interface cannot show the target packet path
  4. An intentionally standby split-interface link may not forward until failover

Explanation

Correct Answer

D:

The architectural weakness is that an intentionally standby split-interface link may not forward until failover. It can be addressed through the controlled change to confirm enabled FortiLink split-interface behavior and its supported active standby design.

Incorrect Answers

A:

The offered action is: Routed FortiLink management does not transport a continuous VLAN data path between the sites. It is associated with this separate technical condition: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The actual incident concerns a different dependency: An intentionally standby split-interface link may not forward until failover. The corresponding change is: An intentionally standby split-interface link may not forward until failover.

B:

Application slowness cannot be attributed to switching congestion without traffic-level evidence. That may occur elsewhere, but the evidence at the Cedarport multisite IT support team instead points to the fact that an intentionally standby split-interface link may not forward until failover.

C:

The offered alternative is: A capture from the wrong interface cannot show the target packet path. It addresses this separate failure mode: A capture from the wrong interface cannot show the target packet path. In the current case, the observed mechanism is: An intentionally standby split-interface link may not forward until failover. The keyed action, An intentionally standby split-interface link may not forward until failover., targets that condition more directly.

Question 795

At the Cedarport multisite IT support team, a FortiGate split interface shows one standby link inactive and staff plan to replace a healthy transceiver. What is the strongest acceptance test for this change?

  1. All downstream serial numbers reappear when the ISL is restored
  2. A timestamped test identifies the failing hop and matches its diagnostic evidence
  3. The correct intended route is installed and a traceroute follows it
  4. Disconnecting the active path activates the intended standby and preserves management

Explanation

Correct Answer

D:

The intended correction is to confirm enabled FortiLink split-interface behavior and its supported active standby design. The decisive verification is that disconnecting the active path activates the intended standby and preserves management, rather than only confirming configuration was saved.

Incorrect Answers

A:

All downstream serial numbers reappear when the ISL is restored. That result would test a control for this other failure: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The question instead requires evidence for: An intentionally standby split-interface link may not forward until failover. The direct outcome to verify is: Disconnecting the active path activates the intended standby and preserves management.

B:

At the Cedarport multisite IT support team, a result about fortiswitch traffic analyzer correlation would not show that the team corrected the failure where an intentionally standby split-interface link may not forward until failover.

C:

The correct intended route is installed and a traceroute follows it. That result would test a control for this other failure: Routing decisions depend on active installed routes and reachable next hops. The question instead requires evidence for: An intentionally standby split-interface link may not forward until failover. The direct outcome to verify is: Disconnecting the active path activates the intended standby and preserves management.

Question 796

At the Cedarport multisite IT support team, a FortiGate split interface shows one standby link inactive and staff plan to replace a healthy transceiver. Which setting or practice should be reviewed in future?

  1. Update site serial inventory with every RMA
  2. Document expected split-interface port states for monitoring
  3. Remove mirrors and delete expired sensitive captures after each incident
  4. Review route snapshots after gateway updates

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to document expected split-interface port states for monitoring.

Incorrect Answers

A:

Update site serial inventory with every RMA is not the primary recurring safeguard for this problem. The team should document expected split-interface port states for monitoring. For the Cedarport multisite IT support team, the direct corrective action is to confirm enabled FortiLink split-interface behavior and its supported active standby design.

C:

The suggested preventive check is: Remove mirrors and delete expired sensitive captures after each incident. Its technical scope concerns: Network diagnostic captures may expose credentials or customer information unrelated to the incident. This question asks how to sustain control over: An intentionally standby split-interface link may not forward until failover. The more targeted safeguard is: Document expected split-interface port states for monitoring.

D:

Review route snapshots after gateway updates. That safeguard would help prevent recurrence of: Routing decisions depend on active installed routes and reachable next hops. The risk being reviewed here is instead: An intentionally standby split-interface link may not forward until failover. The matching ongoing control is: Document expected split-interface port states for monitoring.

Question 797

At the Pinecrest switching consultancy, a managed switch pair loses MCLAG coordination and downstream users experience duplicated or missing frames. Which corrective action best meets the requirement?

  1. Restore approved bidirectional Layer 3 management routing between the island and FortiGate
  2. Capture IGMP membership reports and queries on the affected VLAN alongside snooping state
  3. Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair
  4. Use STP bridge and port state diagnostics before replacing the optic

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair because broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. A suitable test confirms that both peers recover healthy state and the dual-homed client survives a member outage.

Incorrect Answers

A:

The option addresses the separate situation where fortiLink over Layer 3 requires functional routed controller reachability. For this case, the more appropriate response is to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair. For the Pinecrest switching consultancy, the direct corrective action is to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair.

B:

The offered action is: Capture IGMP membership reports and queries on the affected VLAN alongside snooping state. It is associated with this separate technical condition: Missing group reports or querier traffic can prevent membership learning. The actual incident concerns a different dependency: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The corresponding change is: Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair.

D:

The offered alternative is: Use STP bridge and port state diagnostics before replacing the optic. It addresses this separate failure mode: A healthy port can be intentionally blocked by spanning tree to prevent a loop. In the current case, the observed mechanism is: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The keyed action, Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair., targets that condition more directly.

Question 798

At the Pinecrest switching consultancy, a managed switch pair loses MCLAG coordination and downstream users experience duplicated or missing frames. Which underlying issue most directly explains this situation?

  1. Controller discovery and authorization are separate stages of managed provisioning
  2. Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding
  3. An overly narrow or outdated filter can hide valid traffic from the analyst
  4. Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone

Explanation

Correct Answer

B:

The architectural weakness is that broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. It can be addressed through the controlled change to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair.

Incorrect Answers

A:

The offered principle is: Controller discovery and authorization are separate stages of managed provisioning. In the source material it is associated with: Controller discovery and authorization are separate stages of managed provisioning. This case has a different controlling cause: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. Its keyed mechanism is: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding.

C:

The offered principle is: An overly narrow or outdated filter can hide valid traffic from the analyst. In the source material it is associated with: An overly narrow or outdated filter can hide valid traffic from the analyst. This case has a different controlling cause: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. Its keyed mechanism is: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding.

D:

Although layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone, the presented symptoms do not support that as the primary cause; they indicate that broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. For the Pinecrest switching consultancy, the direct corrective action is to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair.

Question 799

At the Pinecrest switching consultancy, a managed switch pair loses MCLAG coordination and downstream users experience duplicated or missing frames. What evidence would justify considering this concern addressed?

  1. The correct switch serial is discovered after the FortiLink port path is repaired
  2. Both peers recover healthy state and the dual-homed client survives a member outage
  3. Expected discovery frames are visible after the port-role or transport correction
  4. The inventory shows the expected pilot version groups and flags remaining outliers

Explanation

Correct Answer

B:

The intended correction is to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair. The decisive verification is that both peers recover healthy state and the dual-homed client survives a member outage, rather than only confirming configuration was saved.

Incorrect Answers

A:

The correct switch serial is discovered after the FortiLink port path is repaired. That result would test a control for this other failure: Power state alone cannot prove the management discovery path is physically or logically available. The question instead requires evidence for: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The direct outcome to verify is: Both peers recover healthy state and the dual-homed client survives a member outage.

C:

Expected discovery frames are visible after the port-role or transport correction. That result would test a control for this other failure: Missing or altered discovery frames can prevent automatic topology association. The question instead requires evidence for: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The direct outcome to verify is: Both peers recover healthy state and the dual-homed client survives a member outage.

D:

The offered observation is: The inventory shows the expected pilot version groups and flags remaining outliers. It would support the separate mechanism: A partial firmware rollout can leave incompatible configuration behavior among devices. In this case the decisive dependency is: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The original keyed verification is: Both peers recover healthy state and the dual-homed client survives a member outage.

Question 800

At the Pinecrest switching consultancy, a managed switch pair loses MCLAG coordination and downstream users experience duplicated or missing frames. How should the organization sustain the improvement?

  1. Alert on MCLAG peer and ICL alarms
  2. Audit LLDP neighbor detection during security hardening
  3. Trend optical health for critical uplinks
  4. Check trusted NTP status before distributed capture sessions

Explanation

Correct Answer

A:

The team should alert on MCLAG peer and ICL alarms. That recurring practice targets the same weakness, namely that broken MCLAG peer communication can defeat coordinated multi-chassis forwarding.

Incorrect Answers

B:

Audit LLDP neighbor detection during security hardening. That safeguard would help prevent recurrence of: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The risk being reviewed here is instead: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The matching ongoing control is: Alert on MCLAG peer and ICL alarms.

C:

That routine supports fortiswitch optical diagnostics, but the relevant ongoing risk requires the team to alert on MCLAG peer and ICL alarms. For the Pinecrest switching consultancy, the direct corrective action is to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair.

D:

Check trusted NTP status before distributed capture sessions. That safeguard would help prevent recurrence of: Unsynchronized device clocks can make a correct event sequence appear contradictory. The risk being reviewed here is instead: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The matching ongoing control is: Alert on MCLAG peer and ICL alarms.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests