McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 81

Question 800

At the Pinecrest switching consultancy, a managed switch pair loses MCLAG coordination and downstream users experience duplicated or missing frames. How should the organization sustain the improvement?

  1. Alert on MCLAG peer and ICL alarms
  2. Audit LLDP neighbor detection during security hardening
  3. Trend optical health for critical uplinks
  4. Check trusted NTP status before distributed capture sessions

Explanation

Correct Answer

A:

The team should alert on MCLAG peer and ICL alarms. That recurring practice targets the same weakness, namely that broken MCLAG peer communication can defeat coordinated multi-chassis forwarding.

Incorrect Answers

B:

Audit LLDP neighbor detection during security hardening. That safeguard would help prevent recurrence of: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The risk being reviewed here is instead: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The matching ongoing control is: Alert on MCLAG peer and ICL alarms.

C:

That routine supports fortiswitch optical diagnostics, but the relevant ongoing risk requires the team to alert on MCLAG peer and ICL alarms. For the Pinecrest switching consultancy, the direct corrective action is to inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair.

D:

Check trusted NTP status before distributed capture sessions. That safeguard would help prevent recurrence of: Unsynchronized device clocks can make a correct event sequence appear contradictory. The risk being reviewed here is instead: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The matching ongoing control is: Alert on MCLAG peer and ICL alarms.

Question 801

At the Dartwood infrastructure service operator, the first managed switch is online but all switches farther along one stack branch disappear after a patch-panel change. Which approach best resolves the described issue?

  1. Check switch authorization state and approve the correct serial under site change control
  2. Inspect the affected upstream ISL and its auto-discovery or static trunk configuration
  3. Use STP bridge and port state diagnostics before replacing the optic
  4. Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault

Explanation

Correct Answer

B:

For the Dartwood infrastructure service operator, the appropriate correction is to inspect the affected upstream ISL and its auto-discovery or static trunk configuration. The decisive reason is that a failed parent-child inter-switch link can isolate multiple downstream managed devices; acceptance evidence is that all downstream serial numbers reappear when the ISL is restored.

Incorrect Answers

A:

Check switch authorization state and approve the correct serial under site change control can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect the affected upstream ISL and its auto-discovery or static trunk configuration. For the Dartwood infrastructure service operator, the direct corrective action is to inspect the affected upstream ISL and its auto-discovery or static trunk configuration.

C:

This alternative would be suitable where a healthy port can be intentionally blocked by spanning tree to prevent a loop. It does not by itself resolve the need to inspect the affected upstream ISL and its auto-discovery or static trunk configuration. For the Dartwood infrastructure service operator, the direct corrective action is to inspect the affected upstream ISL and its auto-discovery or static trunk configuration.

D:

Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault addresses a different kind of problem: an overly narrow or outdated filter can hide valid traffic from the analyst. Here the reported weakness is that a failed parent-child inter-switch link can isolate multiple downstream managed devices. For the Dartwood infrastructure service operator, the direct corrective action is to inspect the affected upstream ISL and its auto-discovery or static trunk configuration.

Question 802

At the Dartwood infrastructure service operator, the first managed switch is online but all switches farther along one stack branch disappear after a patch-panel change. Which explanation best accounts for the concern?

  1. A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures
  2. A failed parent-child inter-switch link can isolate multiple downstream managed devices
  3. A physical link can stay up while LACP partner agreement remains incomplete
  4. Missing or unexpected STP BPDUs affect safe root election and redundant-port states

Explanation

Correct Answer

B:

The problem stems from the fact that a failed parent-child inter-switch link can isolate multiple downstream managed devices. A correct solution would inspect the affected upstream ISL and its auto-discovery or static trunk configuration and check that all downstream serial numbers reappear when the ISL is restored.

Incorrect Answers

A:

The offered principle is: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. In the source material it is associated with: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. This case has a different controlling cause: A failed parent-child inter-switch link can isolate multiple downstream managed devices. Its keyed mechanism is: A failed parent-child inter-switch link can isolate multiple downstream managed devices.

C:

The offered principle is: A physical link can stay up while LACP partner agreement remains incomplete. In the source material it is associated with: A physical link can stay up while LACP partner agreement remains incomplete. This case has a different controlling cause: A failed parent-child inter-switch link can isolate multiple downstream managed devices. Its keyed mechanism is: A failed parent-child inter-switch link can isolate multiple downstream managed devices.

D:

Missing or unexpected STP BPDUs affect safe root election and redundant-port states. That may occur elsewhere, but the evidence at the Dartwood infrastructure service operator instead points to the fact that a failed parent-child inter-switch link can isolate multiple downstream managed devices.

Question 803

At the Dartwood infrastructure service operator, the first managed switch is online but all switches farther along one stack branch disappear after a patch-panel change. Which test result best shows the requirement is met?

  1. The intended device transitions to authorized and receives the correct port settings
  2. All downstream serial numbers reappear when the ISL is restored
  3. Both members exchange compatible LACP parameters and become active
  4. The trace contains only necessary metadata or approved payload and is stored under access controls

Explanation

Correct Answer

B:

This is the relevant acceptance result: all downstream serial numbers reappear when the ISL is restored. It demonstrates the outcome of choosing to inspect the affected upstream ISL and its auto-discovery or static trunk configuration.

Incorrect Answers

A:

The intended device transitions to authorized and receives the correct port settings. That result would test a control for this other failure: Controller discovery and authorization are separate stages of managed provisioning. The question instead requires evidence for: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The direct outcome to verify is: All downstream serial numbers reappear when the ISL is restored.

C:

Both members exchange compatible LACP parameters and become active. That result would test a control for this other failure: A physical link can stay up while LACP partner agreement remains incomplete. The question instead requires evidence for: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The direct outcome to verify is: All downstream serial numbers reappear when the ISL is restored.

D:

At the Dartwood infrastructure service operator, a result about packet mirroring data governance would not show that the team corrected the failure where a failed parent-child inter-switch link can isolate multiple downstream managed devices.

Question 804

At the Dartwood infrastructure service operator, the first managed switch is online but all switches farther along one stack branch disappear after a patch-panel change. Which ongoing control best prevents this issue from recurring?

  1. Maintain the stack topology diagram and ISL health alerts
  2. Monitor controller reachability across routed WAN changes
  3. Record capture location when interpreting tagging evidence
  4. Preserve a short ARP capture for repeated gateway impersonation incidents

Explanation

Correct Answer

A:

The continuing safeguard is to maintain the stack topology diagram and ISL health alerts. It helps avoid the original condition: a failed parent-child inter-switch link can isolate multiple downstream managed devices.

Incorrect Answers

B:

Monitor controller reachability across routed WAN changes. That safeguard would help prevent recurrence of: FortiLink over Layer 3 requires functional routed controller reachability. The risk being reviewed here is instead: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The matching ongoing control is: Maintain the stack topology diagram and ISL health alerts.

C:

Record capture location when interpreting tagging evidence is not the primary recurring safeguard for this problem. The team should maintain the stack topology diagram and ISL health alerts. For the Dartwood infrastructure service operator, the direct corrective action is to inspect the affected upstream ISL and its auto-discovery or static trunk configuration.

D:

Preserve a short ARP capture for repeated gateway impersonation incidents. That safeguard would help prevent recurrence of: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. The risk being reviewed here is instead: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The matching ongoing control is: Maintain the stack topology diagram and ISL health alerts.

Question 805

At the Silverport enterprise network team, a ring loses controller connectivity for some members after two rapid inter-switch link changes. Which implementation choice best addresses the situation?

  1. Check supported ring topology and loop prevention and isolate the failed links sequentially
  2. Restore supported LLDP or FortiLink neighbor detection settings on the correct uplink
  3. Inspect supported transceiver optical power and temperature diagnostics with physical error counters
  4. Capture on the trunk or a supported mirrored path where VLAN tags should be visible

Explanation

Correct Answer

A:

This solution addresses the stated limitation: a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. Implementing it means the team should check supported ring topology and loop prevention and isolate the failed links sequentially, then verify that a single-link fault test converges without a broadcast storm or lost member.

Incorrect Answers

B:

Restore supported LLDP or FortiLink neighbor detection settings on the correct uplink addresses a different kind of problem: the controller cannot build its intended neighbor map if required discovery frames are suppressed. Here the reported weakness is that a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. For the Silverport enterprise network team, the direct corrective action is to check supported ring topology and loop prevention and isolate the failed links sequentially.

C:

The option addresses the separate situation where low receive power or thermal degradation may cause intermittent link failures. For this case, the more appropriate response is to check supported ring topology and loop prevention and isolate the failed links sequentially. For the Silverport enterprise network team, the direct corrective action is to check supported ring topology and loop prevention and isolate the failed links sequentially.

D:

The offered alternative is: Capture on the trunk or a supported mirrored path where VLAN tags should be visible. It addresses this separate failure mode: Access-port observations may not include tags that are present on inter-switch trunks. In the current case, the observed mechanism is: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The keyed action, Check supported ring topology and loop prevention and isolate the failed links sequentially., targets that condition more directly.

Question 806

At the Silverport enterprise network team, a ring loses controller connectivity for some members after two rapid inter-switch link changes. What risk should the team identify as the primary issue?

  1. A shared controller service problem can affect several managed devices at once
  2. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS
  3. A capture from the wrong interface cannot show the target packet path
  4. A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures

Explanation

Correct Answer

D:

The architectural weakness is that a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. It can be addressed through the controlled change to check supported ring topology and loop prevention and isolate the failed links sequentially.

Incorrect Answers

A:

The offered action is: A shared controller service problem can affect several managed devices at once. It is associated with this separate technical condition: A shared controller service problem can affect several managed devices at once. The actual incident concerns a different dependency: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The corresponding change is: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures.

B:

Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. That may occur elsewhere, but the evidence at the Silverport enterprise network team instead points to the fact that a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures.

C:

The offered alternative is: A capture from the wrong interface cannot show the target packet path. It addresses this separate failure mode: A capture from the wrong interface cannot show the target packet path. In the current case, the observed mechanism is: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The keyed action, A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures., targets that condition more directly.

Question 807

At the Silverport enterprise network team, a ring loses controller connectivity for some members after two rapid inter-switch link changes. What is the strongest acceptance test for this change?

  1. A single-link fault test converges without a broadcast storm or lost member
  2. Both peers recover healthy state and the dual-homed client survives a member outage
  3. The inventory shows the expected pilot version groups and flags remaining outliers
  4. The correct intended route is installed and a traceroute follows it

Explanation

Correct Answer

A:

Because a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures, the required evidence must show that a single-link fault test converges without a broadcast storm or lost member. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Silverport enterprise network team, a result about fortilink mclag peer degradation would not show that the team corrected the failure where a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures.

C:

The inventory shows the expected pilot version groups and flags remaining outliers. That result would test a control for this other failure: A partial firmware rollout can leave incompatible configuration behavior among devices. The question instead requires evidence for: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The direct outcome to verify is: A single-link fault test converges without a broadcast storm or lost member.

D:

The offered observation is: The correct intended route is installed and a traceroute follows it. It would support the separate mechanism: Routing decisions depend on active installed routes and reachable next hops. In this case the decisive dependency is: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The original keyed verification is: A single-link fault test converges without a broadcast storm or lost member.

Question 808

At the Silverport enterprise network team, a ring loses controller connectivity for some members after two rapid inter-switch link changes. Which setting or practice should be reviewed in future?

  1. Require FortiLink exception review before WAN NAT changes
  2. Maintain capture-point maps for managed FortiSwitch traffic flows
  3. Rehearse single-link failure cases after ring modification
  4. Review route snapshots after gateway updates

Explanation

Correct Answer

C:

The team should rehearse single-link failure cases after ring modification. That recurring practice targets the same weakness, namely that a redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures.

Incorrect Answers

A:

Require FortiLink exception review before WAN NAT changes is not the primary recurring safeguard for this problem. The team should rehearse single-link failure cases after ring modification. For the Silverport enterprise network team, the direct corrective action is to check supported ring topology and loop prevention and isolate the failed links sequentially.

B:

Maintain capture-point maps for managed FortiSwitch traffic flows. That safeguard would help prevent recurrence of: A single vantage point cannot prove where the bidirectional packet path failed. The risk being reviewed here is instead: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The matching ongoing control is: Rehearse single-link failure cases after ring modification.

D:

Review route snapshots after gateway updates. That safeguard would help prevent recurrence of: Routing decisions depend on active installed routes and reachable next hops. The risk being reviewed here is instead: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The matching ongoing control is: Rehearse single-link failure cases after ring modification.

Question 809

At the Elmhurst network modernization program, several managed switches disconnect immediately after a FortiGate version upgrade. Which corrective action best meets the requirement?

  1. Inspect FortiGate switch-controller service logs and management state before resetting every switch
  2. Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters
  3. Capture on the trunk or a supported mirrored path where VLAN tags should be visible
  4. Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies

Explanation

Correct Answer

B:

The primary failure mode is that an incompatible controller and switch software combination can disrupt FortiLink management. The proposed action directly fixes it by requiring the team to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters; afterward, verify that a pilot switch reconnects reliably after moving to a documented supported release combination.

Incorrect Answers

A:

The option addresses the separate situation where a shared controller service problem can affect several managed devices at once. For this case, the more appropriate response is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters. For the Elmhurst network modernization program, the direct corrective action is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters.

C:

Capture on the trunk or a supported mirrored path where VLAN tags should be visible can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters. For the Elmhurst network modernization program, the direct corrective action is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters.

D:

The offered alternative is: Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies. It addresses this separate failure mode: Copper faults can affect negotiation independently of Layer 2 configuration. In the current case, the observed mechanism is: An incompatible controller and switch software combination can disrupt FortiLink management. The keyed action, Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters., targets that condition more directly.

Question 810

At the Elmhurst network modernization program, several managed switches disconnect immediately after a FortiGate version upgrade. Which underlying issue most directly explains this situation?

  1. An incompatible controller and switch software combination can disrupt FortiLink management
  2. A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures
  3. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  4. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS

Explanation

Correct Answer

A:

The evidence indicates that an incompatible controller and switch software combination can disrupt FortiLink management. The appropriate response is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters and demonstrate that a pilot switch reconnects reliably after moving to a documented supported release combination.

Incorrect Answers

B:

A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. That is not the mechanism that accounts for the stated failure at the Elmhurst network modernization program.

C:

The offered principle is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. In the source material it is associated with: The DHCP failure could occur before relay or after server response and needs packet-level isolation. This case has a different controlling cause: An incompatible controller and switch software combination can disrupt FortiLink management. Its keyed mechanism is: An incompatible controller and switch software combination can disrupt FortiLink management.

D:

Although missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS, the presented symptoms do not support that as the primary cause; they indicate that an incompatible controller and switch software combination can disrupt FortiLink management. For the Elmhurst network modernization program, the direct corrective action is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests