McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 82

Question 810

At the Elmhurst network modernization program, several managed switches disconnect immediately after a FortiGate version upgrade. Which underlying issue most directly explains this situation?

  1. An incompatible controller and switch software combination can disrupt FortiLink management
  2. A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures
  3. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  4. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS

Explanation

Correct Answer

A:

The evidence indicates that an incompatible controller and switch software combination can disrupt FortiLink management. The appropriate response is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters and demonstrate that a pilot switch reconnects reliably after moving to a documented supported release combination.

Incorrect Answers

B:

A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. That is not the mechanism that accounts for the stated failure at the Elmhurst network modernization program.

C:

The offered principle is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. In the source material it is associated with: The DHCP failure could occur before relay or after server response and needs packet-level isolation. This case has a different controlling cause: An incompatible controller and switch software combination can disrupt FortiLink management. Its keyed mechanism is: An incompatible controller and switch software combination can disrupt FortiLink management.

D:

Although missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS, the presented symptoms do not support that as the primary cause; they indicate that an incompatible controller and switch software combination can disrupt FortiLink management. For the Elmhurst network modernization program, the direct corrective action is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters.

Question 811

At the Elmhurst network modernization program, several managed switches disconnect immediately after a FortiGate version upgrade. What evidence would justify considering this concern addressed?

  1. Local broadcasts remain isolated while approved routed application traffic succeeds
  2. Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary
  3. A pilot switch reconnects reliably after moving to a documented supported release combination
  4. A peak-load test shows adequate watts for the critical access points

Explanation

Correct Answer

C:

At the Elmhurst network modernization program, evidence that a pilot switch reconnects reliably after moving to a documented supported release combination directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

Local broadcasts remain isolated while approved routed application traffic succeeds. That result would test a control for this other failure: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The question instead requires evidence for: An incompatible controller and switch software combination can disrupt FortiLink management. The direct outcome to verify is: A pilot switch reconnects reliably after moving to a documented supported release combination.

B:

The offered observation is: Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary. It would support the separate mechanism: A single vantage point cannot prove where the bidirectional packet path failed. In this case the decisive dependency is: An incompatible controller and switch software combination can disrupt FortiLink management. The original keyed verification is: A pilot switch reconnects reliably after moving to a documented supported release combination.

D:

The offered observation is: A peak-load test shows adequate watts for the critical access points. It would support the separate mechanism: An exhausted PoE power budget can interrupt otherwise healthy network links. In this case the decisive dependency is: An incompatible controller and switch software combination can disrupt FortiLink management. The original keyed verification is: A pilot switch reconnects reliably after moving to a documented supported release combination.

Question 812

At the Elmhurst network modernization program, several managed switches disconnect immediately after a FortiGate version upgrade. How should the organization sustain the improvement?

  1. Audit management VLAN changes on inter-switch trunks
  2. Maintain capture-point maps for managed FortiSwitch traffic flows
  3. Use the switch diagnostics pane during triage before reboot requests
  4. Test upgrade compatibility in a staging environment first

Explanation

Correct Answer

D:

The needed prevention is to test upgrade compatibility in a staging environment first. It directly sustains the original change to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters.

Incorrect Answers

A:

The suggested preventive check is: Audit management VLAN changes on inter-switch trunks. Its technical scope concerns: User VLAN forwarding can survive while the specific controller management path is broken. This question asks how to sustain control over: An incompatible controller and switch software combination can disrupt FortiLink management. The more targeted safeguard is: Test upgrade compatibility in a staging environment first.

B:

Maintain capture-point maps for managed FortiSwitch traffic flows. That safeguard would help prevent recurrence of: A single vantage point cannot prove where the bidirectional packet path failed. The risk being reviewed here is instead: An incompatible controller and switch software combination can disrupt FortiLink management. The matching ongoing control is: Test upgrade compatibility in a staging environment first.

C:

That routine supports managed fortiswitch diagnostics pane, but the relevant ongoing risk requires the team to test upgrade compatibility in a staging environment first. For the Elmhurst network modernization program, the direct corrective action is to check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters.

Question 813

At the Stonehaven LAN operations group, an upstream switch port stops discovering downstream FortiSwitch units after LLDP reception is turned off. Which approach best resolves the described issue?

  1. Restore supported LLDP or FortiLink neighbor detection settings on the correct uplink
  2. Check switch authorization state and approve the correct serial under site change control
  3. Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path
  4. Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode

Explanation

Correct Answer

A:

The reported facts support this change rather than a general platform replacement. The team should restore supported LLDP or FortiLink neighbor detection settings on the correct uplink because the controller cannot build its intended neighbor map if required discovery frames are suppressed. A suitable test confirms that the downstream switch is rediscovered and the neighbor table records its port.

Incorrect Answers

B:

The offered action is: Check switch authorization state and approve the correct serial under site change control. It is associated with this separate technical condition: Controller discovery and authorization are separate stages of managed provisioning. The actual incident concerns a different dependency: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The corresponding change is: Restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

C:

This alternative would be suitable where missing or altered discovery frames can prevent automatic topology association. It does not by itself resolve the need to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink. For the Stonehaven LAN operations group, the direct corrective action is to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

D:

Capture or inspect LACPDU exchange on each intended member link before changing aggregation mode addresses a different kind of problem: a physical link can stay up while LACP partner agreement remains incomplete. Here the reported weakness is that the controller cannot build its intended neighbor map if required discovery frames are suppressed. For the Stonehaven LAN operations group, the direct corrective action is to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

Question 814

At the Stonehaven LAN operations group, an upstream switch port stops discovering downstream FortiSwitch units after LLDP reception is turned off. Which explanation best accounts for the concern?

  1. The controller cannot build its intended neighbor map if required discovery frames are suppressed
  2. An intentionally standby split-interface link may not forward until failover
  3. An exhausted PoE power budget can interrupt otherwise healthy network links
  4. A physical link can stay up while LACP partner agreement remains incomplete

Explanation

Correct Answer

A:

The strongest explanation is that the controller cannot build its intended neighbor map if required discovery frames are suppressed. This accounts for the outcome and supports the action to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

Incorrect Answers

B:

Although an intentionally standby split-interface link may not forward until failover, the presented symptoms do not support that as the primary cause; they indicate that the controller cannot build its intended neighbor map if required discovery frames are suppressed. For the Stonehaven LAN operations group, the direct corrective action is to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

C:

The offered principle is: An exhausted PoE power budget can interrupt otherwise healthy network links. In the source material it is associated with: An exhausted PoE power budget can interrupt otherwise healthy network links. This case has a different controlling cause: The controller cannot build its intended neighbor map if required discovery frames are suppressed. Its keyed mechanism is: The controller cannot build its intended neighbor map if required discovery frames are suppressed.

D:

A physical link can stay up while LACP partner agreement remains incomplete. That may occur elsewhere, but the evidence at the Stonehaven LAN operations group instead points to the fact that the controller cannot build its intended neighbor map if required discovery frames are suppressed.

Question 815

At the Stonehaven LAN operations group, an upstream switch port stops discovering downstream FortiSwitch units after LLDP reception is turned off. Which test result best shows the requirement is met?

  1. All downstream serial numbers reappear when the ISL is restored
  2. The downstream switch is rediscovered and the neighbor table records its port
  3. Expected discovery frames are visible after the port-role or transport correction
  4. The same test connection becomes visible with corrected filter parameters

Explanation

Correct Answer

B:

This is the relevant acceptance result: the downstream switch is rediscovered and the neighbor table records its port. It demonstrates the outcome of choosing to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

Incorrect Answers

A:

All downstream serial numbers reappear when the ISL is restored. That result would test a control for this other failure: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The question instead requires evidence for: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The direct outcome to verify is: The downstream switch is rediscovered and the neighbor table records its port.

C:

Expected discovery frames are visible after the port-role or transport correction. That result would test a control for this other failure: Missing or altered discovery frames can prevent automatic topology association. The question instead requires evidence for: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The direct outcome to verify is: The downstream switch is rediscovered and the neighbor table records its port.

D:

At the Stonehaven LAN operations group, a result about capture filter false negative would not show that the team corrected the failure where the controller cannot build its intended neighbor map if required discovery frames are suppressed.

Question 816

At the Stonehaven LAN operations group, an upstream switch port stops discovering downstream FortiSwitch units after LLDP reception is turned off. Which ongoing control best prevents this issue from recurring?

  1. Review pending authorization inventory each week
  2. Review capture resource limits and retention before high-volume diagnostics
  3. Audit LLDP neighbor detection during security hardening
  4. Record partner identifiers during link aggregation maintenance

Explanation

Correct Answer

C:

After implementation, the team should audit LLDP neighbor detection during security hardening as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports fortilink authorization missing, but the relevant ongoing risk requires the team to audit LLDP neighbor detection during security hardening. For the Stonehaven LAN operations group, the direct corrective action is to restore supported LLDP or FortiLink neighbor detection settings on the correct uplink.

B:

Review capture resource limits and retention before high-volume diagnostics. That safeguard would help prevent recurrence of: Broad captures can exhaust limited capture memory and omit useful packets. The risk being reviewed here is instead: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The matching ongoing control is: Audit LLDP neighbor detection during security hardening.

D:

Record partner identifiers during link aggregation maintenance. That safeguard would help prevent recurrence of: A physical link can stay up while LACP partner agreement remains incomplete. The risk being reviewed here is instead: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The matching ongoing control is: Audit LLDP neighbor detection during security hardening.

Question 817

At the Goldport branch IT department, a remote FortiSwitch island cannot reach its controller after an upstream WAN route update. Which implementation choice best addresses the situation?

  1. Check switch authorization state and approve the correct serial under site change control
  2. Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface
  3. Capture EAPOL frames on the client-facing switch port before investigating server-side authorization
  4. Restore approved bidirectional Layer 3 management routing between the island and FortiGate

Explanation

Correct Answer

D:

The primary failure mode is that fortiLink over Layer 3 requires functional routed controller reachability. The proposed action directly fixes it by requiring the team to restore approved bidirectional Layer 3 management routing between the island and FortiGate; afterward, verify that the remote switch establishes its managed session after route correction.

Incorrect Answers

A:

This alternative would be suitable where controller discovery and authorization are separate stages of managed provisioning. It does not by itself resolve the need to restore approved bidirectional Layer 3 management routing between the island and FortiGate. For the Goldport branch IT department, the direct corrective action is to restore approved bidirectional Layer 3 management routing between the island and FortiGate.

B:

Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface addresses a different kind of problem: layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. Here the reported weakness is that fortiLink over Layer 3 requires functional routed controller reachability. For the Goldport branch IT department, the direct corrective action is to restore approved bidirectional Layer 3 management routing between the island and FortiGate.

C:

The option addresses the separate situation where missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. For this case, the more appropriate response is to restore approved bidirectional Layer 3 management routing between the island and FortiGate. For the Goldport branch IT department, the direct corrective action is to restore approved bidirectional Layer 3 management routing between the island and FortiGate.

Question 818

At the Goldport branch IT department, a remote FortiSwitch island cannot reach its controller after an upstream WAN route update. What risk should the team identify as the primary issue?

  1. An incompatible controller and switch software combination can disrupt FortiLink management
  2. FortiLink over Layer 3 requires functional routed controller reachability
  3. Controller-side diagnostic information can distinguish authorization management and link problems
  4. Missing or unexpected STP BPDUs affect safe root election and redundant-port states

Explanation

Correct Answer

B:

This identifies the root issue: fortiLink over Layer 3 requires functional routed controller reachability. At the Goldport branch IT department, the team should therefore restore approved bidirectional Layer 3 management routing between the island and FortiGate.

Incorrect Answers

A:

The offered action is: An incompatible controller and switch software combination can disrupt FortiLink management. It is associated with this separate technical condition: An incompatible controller and switch software combination can disrupt FortiLink management. The actual incident concerns a different dependency: FortiLink over Layer 3 requires functional routed controller reachability. The corresponding change is: FortiLink over Layer 3 requires functional routed controller reachability.

C:

The offered alternative is: Controller-side diagnostic information can distinguish authorization management and link problems. It addresses this separate failure mode: Controller-side diagnostic information can distinguish authorization management and link problems. In the current case, the observed mechanism is: FortiLink over Layer 3 requires functional routed controller reachability. The keyed action, FortiLink over Layer 3 requires functional routed controller reachability., targets that condition more directly.

D:

Missing or unexpected STP BPDUs affect safe root election and redundant-port states. That is not the mechanism that accounts for the stated failure at the Goldport branch IT department.

Question 819

At the Goldport branch IT department, a remote FortiSwitch island cannot reach its controller after an upstream WAN route update. What is the strongest acceptance test for this change?

  1. The remote switch establishes its managed session after route correction
  2. Both peers recover healthy state and the dual-homed client survives a member outage
  3. Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary
  4. Error counters correlate with the problem and stop increasing after repair

Explanation

Correct Answer

A:

Because fortiLink over Layer 3 requires functional routed controller reachability, the required evidence must show that the remote switch establishes its managed session after route correction. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Goldport branch IT department, a result about fortilink mclag peer degradation would not show that the team corrected the failure where fortiLink over Layer 3 requires functional routed controller reachability.

C:

Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary. That result would test a control for this other failure: A single vantage point cannot prove where the bidirectional packet path failed. The question instead requires evidence for: FortiLink over Layer 3 requires functional routed controller reachability. The direct outcome to verify is: The remote switch establishes its managed session after route correction.

D:

The offered observation is: Error counters correlate with the problem and stop increasing after repair. It would support the separate mechanism: An operational link can still drop or corrupt frames because of media or congestion. In this case the decisive dependency is: FortiLink over Layer 3 requires functional routed controller reachability. The original keyed verification is: The remote switch establishes its managed session after route correction.

Question 820

At the Goldport branch IT department, a remote FortiSwitch island cannot reach its controller after an upstream WAN route update. Which setting or practice should be reviewed in future?

  1. Monitor controller reachability across routed WAN changes
  2. Test upgrade compatibility in a staging environment first
  3. Alert on binding renewal failures when enabling anti-spoofing
  4. Remove mirrors and delete expired sensitive captures after each incident

Explanation

Correct Answer

A:

After implementation, the team should monitor controller reachability across routed WAN changes as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Test upgrade compatibility in a staging environment first. That safeguard would help prevent recurrence of: An incompatible controller and switch software combination can disrupt FortiLink management. The risk being reviewed here is instead: FortiLink over Layer 3 requires functional routed controller reachability. The matching ongoing control is: Monitor controller reachability across routed WAN changes.

C:

The suggested preventive check is: Alert on binding renewal failures when enabling anti-spoofing. Its technical scope concerns: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. This question asks how to sustain control over: FortiLink over Layer 3 requires functional routed controller reachability. The more targeted safeguard is: Monitor controller reachability across routed WAN changes.

D:

Remove mirrors and delete expired sensitive captures after each incident. That safeguard would help prevent recurrence of: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The risk being reviewed here is instead: FortiLink over Layer 3 requires functional routed controller reachability. The matching ongoing control is: Monitor controller reachability across routed WAN changes.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests