McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 83

Question 820

At the Goldport branch IT department, a remote FortiSwitch island cannot reach its controller after an upstream WAN route update. Which setting or practice should be reviewed in future?

  1. Monitor controller reachability across routed WAN changes
  2. Test upgrade compatibility in a staging environment first
  3. Alert on binding renewal failures when enabling anti-spoofing
  4. Remove mirrors and delete expired sensitive captures after each incident

Explanation

Correct Answer

A:

After implementation, the team should monitor controller reachability across routed WAN changes as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Test upgrade compatibility in a staging environment first. That safeguard would help prevent recurrence of: An incompatible controller and switch software combination can disrupt FortiLink management. The risk being reviewed here is instead: FortiLink over Layer 3 requires functional routed controller reachability. The matching ongoing control is: Monitor controller reachability across routed WAN changes.

C:

The suggested preventive check is: Alert on binding renewal failures when enabling anti-spoofing. Its technical scope concerns: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. This question asks how to sustain control over: FortiLink over Layer 3 requires functional routed controller reachability. The more targeted safeguard is: Monitor controller reachability across routed WAN changes.

D:

Remove mirrors and delete expired sensitive captures after each incident. That safeguard would help prevent recurrence of: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The risk being reviewed here is instead: FortiLink over Layer 3 requires functional routed controller reachability. The matching ongoing control is: Monitor controller reachability across routed WAN changes.

Question 821

At the Whitford data network services firm, a carrier change introduces source NAT on the routed link between an isolated FortiSwitch and FortiGate. Which corrective action best meets the requirement?

  1. Inspect the peer group inter-chassis links and FortiLink split-interface transition state before repair
  2. Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path
  3. Remove unsupported NAT from the FortiLink management path or redesign the topology
  4. Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should remove unsupported NAT from the FortiLink management path or redesign the topology because fortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. A suitable test confirms that the remote switch remains managed across the corrected native routed path.

Incorrect Answers

A:

The option addresses the separate situation where broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. For this case, the more appropriate response is to remove unsupported NAT from the FortiLink management path or redesign the topology. For the Whitford data network services firm, the direct corrective action is to remove unsupported NAT from the FortiLink management path or redesign the topology.

B:

The offered action is: Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path. It is associated with this separate technical condition: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The actual incident concerns a different dependency: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The corresponding change is: Remove unsupported NAT from the FortiLink management path or redesign the topology.

D:

The offered alternative is: Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path. It addresses this separate failure mode: Missing or altered discovery frames can prevent automatic topology association. In the current case, the observed mechanism is: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The keyed action, Remove unsupported NAT from the FortiLink management path or redesign the topology., targets that condition more directly.

Question 822

At the Whitford data network services firm, a carrier change introduces source NAT on the routed link between an isolated FortiSwitch and FortiGate. Which underlying issue most directly explains this situation?

  1. Routed FortiLink management does not transport a continuous VLAN data path between the sites
  2. FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller
  3. Broad captures can exhaust limited capture memory and omit useful packets
  4. Unsynchronized device clocks can make a correct event sequence appear contradictory

Explanation

Correct Answer

B:

The architectural weakness is that fortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. It can be addressed through the controlled change to remove unsupported NAT from the FortiLink management path or redesign the topology.

Incorrect Answers

A:

The offered principle is: Routed FortiLink management does not transport a continuous VLAN data path between the sites. In the source material it is associated with: Routed FortiLink management does not transport a continuous VLAN data path between the sites. This case has a different controlling cause: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. Its keyed mechanism is: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller.

C:

The offered principle is: Broad captures can exhaust limited capture memory and omit useful packets. In the source material it is associated with: Broad captures can exhaust limited capture memory and omit useful packets. This case has a different controlling cause: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. Its keyed mechanism is: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller.

D:

Although unsynchronized device clocks can make a correct event sequence appear contradictory, the presented symptoms do not support that as the primary cause; they indicate that fortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. For the Whitford data network services firm, the direct corrective action is to remove unsupported NAT from the FortiLink management path or redesign the topology.

Question 823

At the Whitford data network services firm, a carrier change introduces source NAT on the routed link between an isolated FortiSwitch and FortiGate. What evidence would justify considering this concern addressed?

  1. The switch regains a stable controller session while user forwarding remains correct
  2. The expected blocked and forwarding STP states match the approved topology
  3. The remote switch remains managed across the corrected native routed path
  4. A subscriber emits a valid report and only authorized receiver ports forward the stream

Explanation

Correct Answer

C:

At the Whitford data network services firm, evidence that the remote switch remains managed across the corrected native routed path directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The switch regains a stable controller session while user forwarding remains correct. That result would test a control for this other failure: User VLAN forwarding can survive while the specific controller management path is broken. The question instead requires evidence for: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The direct outcome to verify is: The remote switch remains managed across the corrected native routed path.

B:

The offered observation is: The expected blocked and forwarding STP states match the approved topology. It would support the separate mechanism: A healthy port can be intentionally blocked by spanning tree to prevent a loop. In this case the decisive dependency is: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The original keyed verification is: The remote switch remains managed across the corrected native routed path.

D:

The offered observation is: A subscriber emits a valid report and only authorized receiver ports forward the stream. It would support the separate mechanism: Missing group reports or querier traffic can prevent membership learning. In this case the decisive dependency is: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The original keyed verification is: The remote switch remains managed across the corrected native routed path.

Question 824

At the Whitford data network services firm, a carrier change introduces source NAT on the routed link between an isolated FortiSwitch and FortiGate. How should the organization sustain the improvement?

  1. Retest FortiLink status after HA membership changes
  2. Require FortiLink exception review before WAN NAT changes
  3. Keep multicast capture filters for video service investigations
  4. Record capture location when interpreting tagging evidence

Explanation

Correct Answer

B:

For the Whitford data network services firm, this maintenance action preserves the fix: require FortiLink exception review before WAN NAT changes. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Retest FortiLink status after HA membership changes. Its technical scope concerns: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. This question asks how to sustain control over: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The more targeted safeguard is: Require FortiLink exception review before WAN NAT changes.

C:

That routine supports multicast igmp report trace, but the relevant ongoing risk requires the team to require FortiLink exception review before WAN NAT changes. For the Whitford data network services firm, the direct corrective action is to remove unsupported NAT from the FortiLink management path or redesign the topology.

D:

Record capture location when interpreting tagging evidence. That safeguard would help prevent recurrence of: Access-port observations may not include tags that are present on inter-switch trunks. The risk being reviewed here is instead: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The matching ongoing control is: Require FortiLink exception review before WAN NAT changes.

Question 825

At the Harborwick switching consultancy, a remote FortiSwitch managed over Layer 3 cannot join a broadcast VLAN hosted at the central FortiGate. Which approach best resolves the described issue?

  1. Restore the approved FortiLink management VLAN reachability and trunk membership
  2. Capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters
  3. Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link
  4. Capture IGMP membership reports and queries on the affected VLAN alongside snooping state

Explanation

Correct Answer

C:

This solution addresses the stated limitation: routed FortiLink management does not transport a continuous VLAN data path between the sites. Implementing it means the team should use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link, then verify that local broadcasts remain isolated while approved routed application traffic succeeds.

Incorrect Answers

A:

Restore the approved FortiLink management VLAN reachability and trunk membership can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link. For the Harborwick switching consultancy, the direct corrective action is to use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link.

B:

The offered action is: Capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters. It is associated with this separate technical condition: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The actual incident concerns a different dependency: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The corresponding change is: Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link.

D:

Capture IGMP membership reports and queries on the affected VLAN alongside snooping state addresses a different kind of problem: missing group reports or querier traffic can prevent membership learning. Here the reported weakness is that routed FortiLink management does not transport a continuous VLAN data path between the sites. For the Harborwick switching consultancy, the direct corrective action is to use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link.

Question 826

At the Harborwick switching consultancy, a remote FortiSwitch managed over Layer 3 cannot join a broadcast VLAN hosted at the central FortiGate. Which explanation best accounts for the concern?

  1. Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding
  2. Routed FortiLink management does not transport a continuous VLAN data path between the sites
  3. A rogue ARP sender can impersonate an IP address without changing DHCP lease records
  4. A general firewall health summary omits per-switch physical and managed-port details

Explanation

Correct Answer

B:

The problem stems from the fact that routed FortiLink management does not transport a continuous VLAN data path between the sites. A correct solution would use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link and check that local broadcasts remain isolated while approved routed application traffic succeeds.

Incorrect Answers

A:

The offered principle is: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. In the source material it is associated with: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. This case has a different controlling cause: Routed FortiLink management does not transport a continuous VLAN data path between the sites. Its keyed mechanism is: Routed FortiLink management does not transport a continuous VLAN data path between the sites.

C:

The offered principle is: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. In the source material it is associated with: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. This case has a different controlling cause: Routed FortiLink management does not transport a continuous VLAN data path between the sites. Its keyed mechanism is: Routed FortiLink management does not transport a continuous VLAN data path between the sites.

D:

A general firewall health summary omits per-switch physical and managed-port details. That may occur elsewhere, but the evidence at the Harborwick switching consultancy instead points to the fact that routed FortiLink management does not transport a continuous VLAN data path between the sites.

Question 827

At the Harborwick switching consultancy, a remote FortiSwitch managed over Layer 3 cannot join a broadcast VLAN hosted at the central FortiGate. Which test result best shows the requirement is met?

  1. The downstream switch is rediscovered and the neighbor table records its port
  2. Error counters correlate with the problem and stop increasing after repair
  3. Local broadcasts remain isolated while approved routed application traffic succeeds
  4. The cable test identifies the bad pair and the repaired link returns to expected speed

Explanation

Correct Answer

C:

Because routed FortiLink management does not transport a continuous VLAN data path between the sites, the required evidence must show that local broadcasts remain isolated while approved routed application traffic succeeds. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

The downstream switch is rediscovered and the neighbor table records its port. That result would test a control for this other failure: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The question instead requires evidence for: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The direct outcome to verify is: Local broadcasts remain isolated while approved routed application traffic succeeds.

B:

The offered observation is: Error counters correlate with the problem and stop increasing after repair. It would support the separate mechanism: An operational link can still drop or corrupt frames because of media or congestion. In this case the decisive dependency is: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The original keyed verification is: Local broadcasts remain isolated while approved routed application traffic succeeds.

D:

At the Harborwick switching consultancy, a result about fortiswitch cable tester would not show that the team corrected the failure where routed FortiLink management does not transport a continuous VLAN data path between the sites.

Question 828

At the Harborwick switching consultancy, a remote FortiSwitch managed over Layer 3 cannot join a broadcast VLAN hosted at the central FortiGate. Which ongoing control best prevents this issue from recurring?

  1. Document Layer 3 island limitations in branch network designs
  2. Monitor switch-controller process health and FortiLink sessions
  3. Maintain capture-point maps for managed FortiSwitch traffic flows
  4. Alert on binding renewal failures when enabling anti-spoofing

Explanation

Correct Answer

A:

The continuing safeguard is to document Layer 3 island limitations in branch network designs. It helps avoid the original condition: routed FortiLink management does not transport a continuous VLAN data path between the sites.

Incorrect Answers

B:

Monitor switch-controller process health and FortiLink sessions. That safeguard would help prevent recurrence of: A shared controller service problem can affect several managed devices at once. The risk being reviewed here is instead: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The matching ongoing control is: Document Layer 3 island limitations in branch network designs.

C:

Maintain capture-point maps for managed FortiSwitch traffic flows is not the primary recurring safeguard for this problem. The team should document Layer 3 island limitations in branch network designs. For the Harborwick switching consultancy, the direct corrective action is to use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link.

D:

Alert on binding renewal failures when enabling anti-spoofing. That safeguard would help prevent recurrence of: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. The risk being reviewed here is instead: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The matching ongoing control is: Document Layer 3 island limitations in branch network designs.

Question 829

At the Uptonbridge infrastructure service operator, a FortiGate cluster switches primary member and managed switch inventory disappears temporarily. Which implementation choice best addresses the situation?

  1. Validate supported FortiLink HA topology and both members' management uplink connectivity
  2. Check switch authorization state and approve the correct serial under site change control
  3. Capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply
  4. Compare interface CRC errors discards and utilization under known traffic load

Explanation

Correct Answer

A:

This solution addresses the stated limitation: a newly active FortiGate must have a valid path to its managed FortiSwitch environment. Implementing it means the team should validate supported FortiLink HA topology and both members' management uplink connectivity, then verify that a test HA transition preserves authorized inventory and required services.

Incorrect Answers

B:

Check switch authorization state and approve the correct serial under site change control addresses a different kind of problem: controller discovery and authorization are separate stages of managed provisioning. Here the reported weakness is that a newly active FortiGate must have a valid path to its managed FortiSwitch environment. For the Uptonbridge infrastructure service operator, the direct corrective action is to validate supported FortiLink HA topology and both members' management uplink connectivity.

C:

The option addresses the separate situation where the DHCP failure could occur before relay or after server response and needs packet-level isolation. For this case, the more appropriate response is to validate supported FortiLink HA topology and both members' management uplink connectivity. For the Uptonbridge infrastructure service operator, the direct corrective action is to validate supported FortiLink HA topology and both members' management uplink connectivity.

D:

The offered alternative is: Compare interface CRC errors discards and utilization under known traffic load. It addresses this separate failure mode: An operational link can still drop or corrupt frames because of media or congestion. In the current case, the observed mechanism is: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The keyed action, Validate supported FortiLink HA topology and both members' management uplink connectivity., targets that condition more directly.

Question 830

At the Uptonbridge infrastructure service operator, a FortiGate cluster switches primary member and managed switch inventory disappears temporarily. What risk should the team identify as the primary issue?

  1. FortiLink over Layer 3 requires functional routed controller reachability
  2. Copper faults can affect negotiation independently of Layer 2 configuration
  3. A newly active FortiGate must have a valid path to its managed FortiSwitch environment
  4. A rogue ARP sender can impersonate an IP address without changing DHCP lease records

Explanation

Correct Answer

C:

The evidence indicates that a newly active FortiGate must have a valid path to its managed FortiSwitch environment. The appropriate response is to validate supported FortiLink HA topology and both members' management uplink connectivity and demonstrate that a test HA transition preserves authorized inventory and required services.

Incorrect Answers

A:

The offered action is: FortiLink over Layer 3 requires functional routed controller reachability. It is associated with this separate technical condition: FortiLink over Layer 3 requires functional routed controller reachability. The actual incident concerns a different dependency: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The corresponding change is: A newly active FortiGate must have a valid path to its managed FortiSwitch environment.

B:

Copper faults can affect negotiation independently of Layer 2 configuration. That may occur elsewhere, but the evidence at the Uptonbridge infrastructure service operator instead points to the fact that a newly active FortiGate must have a valid path to its managed FortiSwitch environment.

D:

A rogue ARP sender can impersonate an IP address without changing DHCP lease records. That is not the mechanism that accounts for the stated failure at the Uptonbridge infrastructure service operator.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests