McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 85

Question 840

At the Brookfield network modernization program, many managed switches become unreachable simultaneously despite working physical links and IP addresses. Which ongoing control best prevents this issue from recurring?

  1. Alert on MCLAG peer and ICL alarms
  2. Monitor switch-controller process health and FortiLink sessions
  3. Include EAPOL trace validation in wired-authentication incident templates
  4. Check trusted NTP status before distributed capture sessions

Explanation

Correct Answer

B:

The needed prevention is to monitor switch-controller process health and FortiLink sessions. It directly sustains the original change to inspect FortiGate switch-controller service logs and management state before resetting every switch.

Incorrect Answers

A:

That routine supports fortilink mclag peer degradation, but the relevant ongoing risk requires the team to monitor switch-controller process health and FortiLink sessions. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

C:

Include EAPOL trace validation in wired-authentication incident templates is not the primary recurring safeguard for this problem. The team should monitor switch-controller process health and FortiLink sessions. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

D:

Check trusted NTP status before distributed capture sessions. That safeguard would help prevent recurrence of: Unsynchronized device clocks can make a correct event sequence appear contradictory. The risk being reviewed here is instead: A shared controller service problem can affect several managed devices at once. The matching ongoing control is: Monitor switch-controller process health and FortiLink sessions.

Question 841

At the Kingsford managed-network provider, an operator cannot tell which managed FortiSwitch has an unstable port and only watches the FortiGate dashboard summary. Which implementation choice best addresses the situation?

  1. Open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state
  2. Inspect system CPU memory and management-process health using supported diagnostics
  3. Inspect the affected upstream ISL and its auto-discovery or static trunk configuration
  4. Inspect FortiGate switch-controller service logs and management state before resetting every switch

Explanation

Correct Answer

A:

This solution addresses the stated limitation: a general firewall health summary omits per-switch physical and managed-port details. Implementing it means the team should open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state, then verify that the affected port and its state are identified under the expected switch serial.

Incorrect Answers

B:

Inspect system CPU memory and management-process health using supported diagnostics addresses a different kind of problem: control-plane resource contention can cause slow management and protocol updates without saturated data links. Here the reported weakness is that a general firewall health summary omits per-switch physical and managed-port details. For the Kingsford managed-network provider, the direct corrective action is to open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state.

C:

The option addresses the separate situation where a failed parent-child inter-switch link can isolate multiple downstream managed devices. For this case, the more appropriate response is to open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state. For the Kingsford managed-network provider, the direct corrective action is to open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state.

D:

The offered alternative is: Inspect FortiGate switch-controller service logs and management state before resetting every switch. It addresses this separate failure mode: A shared controller service problem can affect several managed devices at once. In the current case, the observed mechanism is: A general firewall health summary omits per-switch physical and managed-port details. The keyed action, Open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state., targets that condition more directly.

Question 842

At the Kingsford managed-network provider, an operator cannot tell which managed FortiSwitch has an unstable port and only watches the FortiGate dashboard summary. What risk should the team identify as the primary issue?

  1. A general firewall health summary omits per-switch physical and managed-port details
  2. Routing decisions depend on active installed routes and reachable next hops
  3. The controller cannot build its intended neighbor map if required discovery frames are suppressed
  4. Unsynchronized device clocks can make a correct event sequence appear contradictory

Explanation

Correct Answer

A:

The situation shows that a general firewall health summary omits per-switch physical and managed-port details, rather than merely a monitoring or presentation issue. Remediation is to open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state.

Incorrect Answers

B:

Routing decisions depend on active installed routes and reachable next hops. That may occur elsewhere, but the evidence at the Kingsford managed-network provider instead points to the fact that a general firewall health summary omits per-switch physical and managed-port details.

C:

The offered alternative is: The controller cannot build its intended neighbor map if required discovery frames are suppressed. It addresses this separate failure mode: The controller cannot build its intended neighbor map if required discovery frames are suppressed. In the current case, the observed mechanism is: A general firewall health summary omits per-switch physical and managed-port details. The keyed action, A general firewall health summary omits per-switch physical and managed-port details., targets that condition more directly.

D:

Unsynchronized device clocks can make a correct event sequence appear contradictory. That is not the mechanism that accounts for the stated failure at the Kingsford managed-network provider.

Question 843

At the Kingsford managed-network provider, an operator cannot tell which managed FortiSwitch has an unstable port and only watches the FortiGate dashboard summary. What is the strongest acceptance test for this change?

  1. The affected port and its state are identified under the expected switch serial
  2. The correct renewed lease binding appears and legitimate traffic passes
  3. All downstream serial numbers reappear when the ISL is restored
  4. The trace contains only necessary metadata or approved payload and is stored under access controls

Explanation

Correct Answer

A:

Because a general firewall health summary omits per-switch physical and managed-port details, the required evidence must show that the affected port and its state are identified under the expected switch serial. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Kingsford managed-network provider, a result about fortiswitch dhcp snooping binding table would not show that the team corrected the failure where a general firewall health summary omits per-switch physical and managed-port details.

C:

All downstream serial numbers reappear when the ISL is restored. That result would test a control for this other failure: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The question instead requires evidence for: A general firewall health summary omits per-switch physical and managed-port details. The direct outcome to verify is: The affected port and its state are identified under the expected switch serial.

D:

The offered observation is: The trace contains only necessary metadata or approved payload and is stored under access controls. It would support the separate mechanism: Network diagnostic captures may expose credentials or customer information unrelated to the incident. In this case the decisive dependency is: A general firewall health summary omits per-switch physical and managed-port details. The original keyed verification is: The affected port and its state are identified under the expected switch serial.

Question 844

At the Kingsford managed-network provider, an operator cannot tell which managed FortiSwitch has an unstable port and only watches the FortiGate dashboard summary. Which setting or practice should be reviewed in future?

  1. Trend optical health for critical uplinks
  2. Remove mirrors and delete expired sensitive captures after each incident
  3. Audit management VLAN changes on inter-switch trunks
  4. Use the switch diagnostics pane during triage before reboot requests

Explanation

Correct Answer

D:

For the Kingsford managed-network provider, this maintenance action preserves the fix: use the switch diagnostics pane during triage before reboot requests. It should be revisited as the workload evolves.

Incorrect Answers

A:

Trend optical health for critical uplinks is not the primary recurring safeguard for this problem. The team should use the switch diagnostics pane during triage before reboot requests. For the Kingsford managed-network provider, the direct corrective action is to open the managed FortiSwitch Diagnostics and Tools view for the correct serial and inspect port and trunk state.

B:

Remove mirrors and delete expired sensitive captures after each incident. That safeguard would help prevent recurrence of: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The risk being reviewed here is instead: A general firewall health summary omits per-switch physical and managed-port details. The matching ongoing control is: Use the switch diagnostics pane during triage before reboot requests.

C:

The suggested preventive check is: Audit management VLAN changes on inter-switch trunks. Its technical scope concerns: User VLAN forwarding can survive while the specific controller management path is broken. This question asks how to sustain control over: A general firewall health summary omits per-switch physical and managed-port details. The more targeted safeguard is: Use the switch diagnostics pane during triage before reboot requests.

Question 845

At the Yorkport branch IT department, a user moves desks and network staff do not know which FortiSwitch port currently learned the endpoint MAC. Which corrective action best meets the requirement?

  1. Use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state
  2. Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface
  3. Confirm enabled FortiLink split-interface behavior and its supported active standby design
  4. Restore approved bidirectional Layer 3 management routing between the island and FortiGate

Explanation

Correct Answer

B:

The primary failure mode is that layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The proposed action directly fixes it by requiring the team to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface; afterward, verify that the current endpoint MAC appears on the newly cabled approved port.

Incorrect Answers

A:

The option addresses the separate situation where controller-side diagnostic information can distinguish authorization management and link problems. For this case, the more appropriate response is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface. For the Yorkport branch IT department, the direct corrective action is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface.

C:

Confirm enabled FortiLink split-interface behavior and its supported active standby design can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface. For the Yorkport branch IT department, the direct corrective action is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface.

D:

The offered alternative is: Restore approved bidirectional Layer 3 management routing between the island and FortiGate. It addresses this separate failure mode: FortiLink over Layer 3 requires functional routed controller reachability. In the current case, the observed mechanism is: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The keyed action, Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface., targets that condition more directly.

Question 846

At the Yorkport branch IT department, a user moves desks and network staff do not know which FortiSwitch port currently learned the endpoint MAC. Which underlying issue most directly explains this situation?

  1. Stale drawings cannot establish the actual physical adjacent device identity
  2. Broad captures can exhaust limited capture memory and omit useful packets
  3. Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone
  4. A failed parent-child inter-switch link can isolate multiple downstream managed devices

Explanation

Correct Answer

C:

The strongest explanation is that layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. This accounts for the outcome and supports the action to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface.

Incorrect Answers

A:

The offered principle is: Stale drawings cannot establish the actual physical adjacent device identity. In the source material it is associated with: Stale drawings cannot establish the actual physical adjacent device identity. This case has a different controlling cause: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. Its keyed mechanism is: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone.

B:

Broad captures can exhaust limited capture memory and omit useful packets. That is not the mechanism that accounts for the stated failure at the Yorkport branch IT department.

D:

Although a failed parent-child inter-switch link can isolate multiple downstream managed devices, the presented symptoms do not support that as the primary cause; they indicate that layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. For the Yorkport branch IT department, the direct corrective action is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface.

Question 847

At the Yorkport branch IT department, a user moves desks and network staff do not know which FortiSwitch port currently learned the endpoint MAC. What evidence would justify considering this concern addressed?

  1. The cable test identifies the bad pair and the repaired link returns to expected speed
  2. The current endpoint MAC appears on the newly cabled approved port
  3. The requested test conversation appears without an overflowed capture buffer
  4. A known test exchange has matching event order across both capture sources

Explanation

Correct Answer

B:

The intended correction is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface. The decisive verification is that the current endpoint MAC appears on the newly cabled approved port, rather than only confirming configuration was saved.

Incorrect Answers

A:

The cable test identifies the bad pair and the repaired link returns to expected speed. That result would test a control for this other failure: Copper faults can affect negotiation independently of Layer 2 configuration. The question instead requires evidence for: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The direct outcome to verify is: The current endpoint MAC appears on the newly cabled approved port.

C:

The requested test conversation appears without an overflowed capture buffer. That result would test a control for this other failure: Broad captures can exhaust limited capture memory and omit useful packets. The question instead requires evidence for: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The direct outcome to verify is: The current endpoint MAC appears on the newly cabled approved port.

D:

The offered observation is: A known test exchange has matching event order across both capture sources. It would support the separate mechanism: Unsynchronized device clocks can make a correct event sequence appear contradictory. In this case the decisive dependency is: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The original keyed verification is: The current endpoint MAC appears on the newly cabled approved port.

Question 848

At the Yorkport branch IT department, a user moves desks and network staff do not know which FortiSwitch port currently learned the endpoint MAC. How should the organization sustain the improvement?

  1. Publish firmware inventory after each upgrade wave
  2. Record MAC movement information during desk-move incidents
  3. Check trusted NTP status before distributed capture sessions
  4. Check physical and VLAN forwarding path before each new capture

Explanation

Correct Answer

B:

For the Yorkport branch IT department, this maintenance action preserves the fix: record MAC movement information during desk-move incidents. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Publish firmware inventory after each upgrade wave. Its technical scope concerns: A partial firmware rollout can leave incompatible configuration behavior among devices. This question asks how to sustain control over: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The more targeted safeguard is: Record MAC movement information during desk-move incidents.

C:

That routine supports packet timestamp consistency, but the relevant ongoing risk requires the team to record MAC movement information during desk-move incidents. For the Yorkport branch IT department, the direct corrective action is to inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface.

D:

Check physical and VLAN forwarding path before each new capture. That safeguard would help prevent recurrence of: A capture from the wrong interface cannot show the target packet path. The risk being reviewed here is instead: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The matching ongoing control is: Record MAC movement information during desk-move incidents.

Question 849

At the Nortonwood data network services firm, a redundant fiber uplink is up but traffic does not forward and administrators assume the optical module is defective. Which approach best resolves the described issue?

  1. Inspect system CPU memory and management-process health using supported diagnostics
  2. Capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding
  3. Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault
  4. Use STP bridge and port state diagnostics before replacing the optic

Explanation

Correct Answer

D:

Use STP bridge and port state diagnostics before replacing the optic is the best response because a healthy port can be intentionally blocked by spanning tree to prevent a loop. A focused validation would establish that the expected blocked and forwarding STP states match the approved topology.

Incorrect Answers

A:

Inspect system CPU memory and management-process health using supported diagnostics can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use STP bridge and port state diagnostics before replacing the optic. For the Nortonwood data network services firm, the direct corrective action is to use STP bridge and port state diagnostics before replacing the optic.

B:

The offered action is: Capture at both FortiSwitch and FortiGate boundaries to separate switching delivery from firewall forwarding. It is associated with this separate technical condition: A single vantage point cannot prove where the bidirectional packet path failed. The actual incident concerns a different dependency: A healthy port can be intentionally blocked by spanning tree to prevent a loop. The corresponding change is: Use STP bridge and port state diagnostics before replacing the optic.

C:

This alternative would be suitable where an overly narrow or outdated filter can hide valid traffic from the analyst. It does not by itself resolve the need to use STP bridge and port state diagnostics before replacing the optic. For the Nortonwood data network services firm, the direct corrective action is to use STP bridge and port state diagnostics before replacing the optic.

Question 850

At the Nortonwood data network services firm, a redundant fiber uplink is up but traffic does not forward and administrators assume the optical module is defective. Which explanation best accounts for the concern?

  1. A partial firmware rollout can leave incompatible configuration behavior among devices
  2. An overly narrow or outdated filter can hide valid traffic from the analyst
  3. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS
  4. A healthy port can be intentionally blocked by spanning tree to prevent a loop

Explanation

Correct Answer

D:

This identifies the root issue: a healthy port can be intentionally blocked by spanning tree to prevent a loop. At the Nortonwood data network services firm, the team should therefore use STP bridge and port state diagnostics before replacing the optic.

Incorrect Answers

A:

The offered principle is: A partial firmware rollout can leave incompatible configuration behavior among devices. In the source material it is associated with: A partial firmware rollout can leave incompatible configuration behavior among devices. This case has a different controlling cause: A healthy port can be intentionally blocked by spanning tree to prevent a loop. Its keyed mechanism is: A healthy port can be intentionally blocked by spanning tree to prevent a loop.

B:

Although an overly narrow or outdated filter can hide valid traffic from the analyst, the presented symptoms do not support that as the primary cause; they indicate that a healthy port can be intentionally blocked by spanning tree to prevent a loop. For the Nortonwood data network services firm, the direct corrective action is to use STP bridge and port state diagnostics before replacing the optic.

C:

The offered principle is: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. In the source material it is associated with: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. This case has a different controlling cause: A healthy port can be intentionally blocked by spanning tree to prevent a loop. Its keyed mechanism is: A healthy port can be intentionally blocked by spanning tree to prevent a loop.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests