McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 86

Question 850

At the Nortonwood data network services firm, a redundant fiber uplink is up but traffic does not forward and administrators assume the optical module is defective. Which explanation best accounts for the concern?

  1. A partial firmware rollout can leave incompatible configuration behavior among devices
  2. An overly narrow or outdated filter can hide valid traffic from the analyst
  3. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS
  4. A healthy port can be intentionally blocked by spanning tree to prevent a loop

Explanation

Correct Answer

D:

This identifies the root issue: a healthy port can be intentionally blocked by spanning tree to prevent a loop. At the Nortonwood data network services firm, the team should therefore use STP bridge and port state diagnostics before replacing the optic.

Incorrect Answers

A:

The offered principle is: A partial firmware rollout can leave incompatible configuration behavior among devices. In the source material it is associated with: A partial firmware rollout can leave incompatible configuration behavior among devices. This case has a different controlling cause: A healthy port can be intentionally blocked by spanning tree to prevent a loop. Its keyed mechanism is: A healthy port can be intentionally blocked by spanning tree to prevent a loop.

B:

Although an overly narrow or outdated filter can hide valid traffic from the analyst, the presented symptoms do not support that as the primary cause; they indicate that a healthy port can be intentionally blocked by spanning tree to prevent a loop. For the Nortonwood data network services firm, the direct corrective action is to use STP bridge and port state diagnostics before replacing the optic.

C:

The offered principle is: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. In the source material it is associated with: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. This case has a different controlling cause: A healthy port can be intentionally blocked by spanning tree to prevent a loop. Its keyed mechanism is: A healthy port can be intentionally blocked by spanning tree to prevent a loop.

Question 851

At the Nortonwood data network services firm, a redundant fiber uplink is up but traffic does not forward and administrators assume the optical module is defective. Which test result best shows the requirement is met?

  1. The correct renewed lease binding appears and legitimate traffic passes
  2. The trace shows the last successful DHCP message and the boundary where response disappears
  3. The expected blocked and forwarding STP states match the approved topology
  4. The trace contains only necessary metadata or approved payload and is stored under access controls

Explanation

Correct Answer

C:

Because a healthy port can be intentionally blocked by spanning tree to prevent a loop, the required evidence must show that the expected blocked and forwarding STP states match the approved topology. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

The correct renewed lease binding appears and legitimate traffic passes. That result would test a control for this other failure: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. The question instead requires evidence for: A healthy port can be intentionally blocked by spanning tree to prevent a loop. The direct outcome to verify is: The expected blocked and forwarding STP states match the approved topology.

B:

The offered observation is: The trace shows the last successful DHCP message and the boundary where response disappears. It would support the separate mechanism: The DHCP failure could occur before relay or after server response and needs packet-level isolation. In this case the decisive dependency is: A healthy port can be intentionally blocked by spanning tree to prevent a loop. The original keyed verification is: The expected blocked and forwarding STP states match the approved topology.

D:

At the Nortonwood data network services firm, a result about packet mirroring data governance would not show that the team corrected the failure where a healthy port can be intentionally blocked by spanning tree to prevent a loop.

Question 852

At the Nortonwood data network services firm, a redundant fiber uplink is up but traffic does not forward and administrators assume the optical module is defective. Which ongoing control best prevents this issue from recurring?

  1. Maintain a cross-device evidence checklist for switch incidents
  2. Maintain capture-point maps for managed FortiSwitch traffic flows
  3. Keep multicast capture filters for video service investigations
  4. Review root and alternate-port states following link changes

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to review root and alternate-port states following link changes.

Incorrect Answers

A:

That routine supports fortiswitch traffic analyzer correlation, but the relevant ongoing risk requires the team to review root and alternate-port states following link changes. For the Nortonwood data network services firm, the direct corrective action is to use STP bridge and port state diagnostics before replacing the optic.

B:

Maintain capture-point maps for managed FortiSwitch traffic flows. That safeguard would help prevent recurrence of: A single vantage point cannot prove where the bidirectional packet path failed. The risk being reviewed here is instead: A healthy port can be intentionally blocked by spanning tree to prevent a loop. The matching ongoing control is: Review root and alternate-port states following link changes.

C:

Keep multicast capture filters for video service investigations is not the primary recurring safeguard for this problem. The team should review root and alternate-port states following link changes. For the Nortonwood data network services firm, the direct corrective action is to use STP bridge and port state diagnostics before replacing the optic.

Question 853

At the Northport switching consultancy, an inter-building fiber uplink intermittently fails but user-facing interface counters give no reason. Which implementation choice best addresses the situation?

  1. Inspect system CPU memory and management-process health using supported diagnostics
  2. Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters
  3. Capture ARP requests and responses at the affected VLAN while consulting trusted binding data
  4. Inspect supported transceiver optical power and temperature diagnostics with physical error counters

Explanation

Correct Answer

D:

The primary failure mode is that low receive power or thermal degradation may cause intermittent link failures. The proposed action directly fixes it by requiring the team to inspect supported transceiver optical power and temperature diagnostics with physical error counters; afterward, verify that the measured optic value returns to a supported range after component repair.

Incorrect Answers

A:

This alternative would be suitable where control-plane resource contention can cause slow management and protocol updates without saturated data links. It does not by itself resolve the need to inspect supported transceiver optical power and temperature diagnostics with physical error counters. For the Northport switching consultancy, the direct corrective action is to inspect supported transceiver optical power and temperature diagnostics with physical error counters.

B:

Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters addresses a different kind of problem: an incompatible controller and switch software combination can disrupt FortiLink management. Here the reported weakness is that low receive power or thermal degradation may cause intermittent link failures. For the Northport switching consultancy, the direct corrective action is to inspect supported transceiver optical power and temperature diagnostics with physical error counters.

C:

The option addresses the separate situation where a rogue ARP sender can impersonate an IP address without changing DHCP lease records. For this case, the more appropriate response is to inspect supported transceiver optical power and temperature diagnostics with physical error counters. For the Northport switching consultancy, the direct corrective action is to inspect supported transceiver optical power and temperature diagnostics with physical error counters.

Question 854

At the Northport switching consultancy, an inter-building fiber uplink intermittently fails but user-facing interface counters give no reason. What risk should the team identify as the primary issue?

  1. An operational link can still drop or corrupt frames because of media or congestion
  2. A physical link can stay up while LACP partner agreement remains incomplete
  3. An intentionally standby split-interface link may not forward until failover
  4. Low receive power or thermal degradation may cause intermittent link failures

Explanation

Correct Answer

D:

The architectural weakness is that low receive power or thermal degradation may cause intermittent link failures. It can be addressed through the controlled change to inspect supported transceiver optical power and temperature diagnostics with physical error counters.

Incorrect Answers

A:

The offered action is: An operational link can still drop or corrupt frames because of media or congestion. It is associated with this separate technical condition: An operational link can still drop or corrupt frames because of media or congestion. The actual incident concerns a different dependency: Low receive power or thermal degradation may cause intermittent link failures. The corresponding change is: Low receive power or thermal degradation may cause intermittent link failures.

B:

A physical link can stay up while LACP partner agreement remains incomplete. That may occur elsewhere, but the evidence at the Northport switching consultancy instead points to the fact that low receive power or thermal degradation may cause intermittent link failures.

C:

The offered alternative is: An intentionally standby split-interface link may not forward until failover. It addresses this separate failure mode: An intentionally standby split-interface link may not forward until failover. In the current case, the observed mechanism is: Low receive power or thermal degradation may cause intermittent link failures. The keyed action, Low receive power or thermal degradation may cause intermittent link failures., targets that condition more directly.

Question 855

At the Northport switching consultancy, an inter-building fiber uplink intermittently fails but user-facing interface counters give no reason. What is the strongest acceptance test for this change?

  1. The measured optic value returns to a supported range after component repair
  2. The inventory shows the expected pilot version groups and flags remaining outliers
  3. The corrected uplink shows expected bridge control traffic and stable root state
  4. Local broadcasts remain isolated while approved routed application traffic succeeds

Explanation

Correct Answer

A:

Because low receive power or thermal degradation may cause intermittent link failures, the required evidence must show that the measured optic value returns to a supported range after component repair. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Northport switching consultancy, a result about managed fortiswitch firmware inventory would not show that the team corrected the failure where low receive power or thermal degradation may cause intermittent link failures.

C:

The corrected uplink shows expected bridge control traffic and stable root state. That result would test a control for this other failure: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The question instead requires evidence for: Low receive power or thermal degradation may cause intermittent link failures. The direct outcome to verify is: The measured optic value returns to a supported range after component repair.

D:

The offered observation is: Local broadcasts remain isolated while approved routed application traffic succeeds. It would support the separate mechanism: Routed FortiLink management does not transport a continuous VLAN data path between the sites. In this case the decisive dependency is: Low receive power or thermal degradation may cause intermittent link failures. The original keyed verification is: The measured optic value returns to a supported range after component repair.

Question 856

At the Northport switching consultancy, an inter-building fiber uplink intermittently fails but user-facing interface counters give no reason. Which setting or practice should be reviewed in future?

  1. Monitor ACL policy hits after every security rule change
  2. Include EAPOL trace validation in wired-authentication incident templates
  3. Trend optical health for critical uplinks
  4. Document Layer 3 island limitations in branch network designs

Explanation

Correct Answer

C:

The team should trend optical health for critical uplinks. That recurring practice targets the same weakness, namely that low receive power or thermal degradation may cause intermittent link failures.

Incorrect Answers

A:

Monitor ACL policy hits after every security rule change is not the primary recurring safeguard for this problem. The team should trend optical health for critical uplinks. For the Northport switching consultancy, the direct corrective action is to inspect supported transceiver optical power and temperature diagnostics with physical error counters.

B:

Include EAPOL trace validation in wired-authentication incident templates. That safeguard would help prevent recurrence of: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. The risk being reviewed here is instead: Low receive power or thermal degradation may cause intermittent link failures. The matching ongoing control is: Trend optical health for critical uplinks.

D:

Document Layer 3 island limitations in branch network designs. That safeguard would help prevent recurrence of: Routed FortiLink management does not transport a continuous VLAN data path between the sites. The risk being reviewed here is instead: Low receive power or thermal degradation may cause intermittent link failures. The matching ongoing control is: Trend optical health for critical uplinks.

Question 857

At the Maplehaven multisite IT support team, a desk port negotiates unexpectedly low speed following a patch-panel change. Which corrective action best meets the requirement?

  1. Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies
  2. Read supported ACL hit counters and policy attachment scope for the target packet path
  3. Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path
  4. Restore supported LLDP or FortiLink neighbor detection settings on the correct uplink

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies. The observed risk is that copper faults can affect negotiation independently of Layer 2 configuration; a passing acceptance check would show that the cable test identifies the bad pair and the repaired link returns to expected speed.

Incorrect Answers

B:

The offered action is: Read supported ACL hit counters and policy attachment scope for the target packet path. It is associated with this separate technical condition: A filter with no matching hits may be incorrectly ordered attached or classified. The actual incident concerns a different dependency: Copper faults can affect negotiation independently of Layer 2 configuration. The corresponding change is: Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies.

C:

Capture or inspect LLDP and FortiLink discovery information on the correct inter-switch path can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies. For the Maplehaven multisite IT support team, the direct corrective action is to use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies.

D:

The offered alternative is: Restore supported LLDP or FortiLink neighbor detection settings on the correct uplink. It addresses this separate failure mode: The controller cannot build its intended neighbor map if required discovery frames are suppressed. In the current case, the observed mechanism is: Copper faults can affect negotiation independently of Layer 2 configuration. The keyed action, Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies., targets that condition more directly.

Question 858

At the Maplehaven multisite IT support team, a desk port negotiates unexpectedly low speed following a patch-panel change. Which underlying issue most directly explains this situation?

  1. No single data source proves whether frames were dropped locally or later by routing or firewall policy
  2. Application slowness cannot be attributed to switching congestion without traffic-level evidence
  3. Copper faults can affect negotiation independently of Layer 2 configuration
  4. A newly active FortiGate must have a valid path to its managed FortiSwitch environment

Explanation

Correct Answer

C:

The strongest explanation is that copper faults can affect negotiation independently of Layer 2 configuration. This accounts for the outcome and supports the action to use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies.

Incorrect Answers

A:

The offered principle is: No single data source proves whether frames were dropped locally or later by routing or firewall policy. In the source material it is associated with: No single data source proves whether frames were dropped locally or later by routing or firewall policy. This case has a different controlling cause: Copper faults can affect negotiation independently of Layer 2 configuration. Its keyed mechanism is: Copper faults can affect negotiation independently of Layer 2 configuration.

B:

Application slowness cannot be attributed to switching congestion without traffic-level evidence. That is not the mechanism that accounts for the stated failure at the Maplehaven multisite IT support team.

D:

Although a newly active FortiGate must have a valid path to its managed FortiSwitch environment, the presented symptoms do not support that as the primary cause; they indicate that copper faults can affect negotiation independently of Layer 2 configuration. For the Maplehaven multisite IT support team, the direct corrective action is to use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies.

Question 859

At the Maplehaven multisite IT support team, a desk port negotiates unexpectedly low speed following a patch-panel change. What evidence would justify considering this concern addressed?

  1. The cable test identifies the bad pair and the repaired link returns to expected speed
  2. The current endpoint MAC appears on the newly cabled approved port
  3. The correct switch serial is discovered after the FortiLink port path is repaired
  4. A test HA transition preserves authorized inventory and required services

Explanation

Correct Answer

A:

This tests the real business behavior: the cable test identifies the bad pair and the repaired link returns to expected speed. It specifically checks whether the risk that copper faults can affect negotiation independently of Layer 2 configuration has been reduced.

Incorrect Answers

B:

The offered observation is: The current endpoint MAC appears on the newly cabled approved port. It would support the separate mechanism: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. In this case the decisive dependency is: Copper faults can affect negotiation independently of Layer 2 configuration. The original keyed verification is: The cable test identifies the bad pair and the repaired link returns to expected speed.

C:

The correct switch serial is discovered after the FortiLink port path is repaired. That result would test a control for this other failure: Power state alone cannot prove the management discovery path is physically or logically available. The question instead requires evidence for: Copper faults can affect negotiation independently of Layer 2 configuration. The direct outcome to verify is: The cable test identifies the bad pair and the repaired link returns to expected speed.

D:

The offered observation is: A test HA transition preserves authorized inventory and required services. It would support the separate mechanism: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. In this case the decisive dependency is: Copper faults can affect negotiation independently of Layer 2 configuration. The original keyed verification is: The cable test identifies the bad pair and the repaired link returns to expected speed.

Question 860

At the Maplehaven multisite IT support team, a desk port negotiates unexpectedly low speed following a patch-panel change. How should the organization sustain the improvement?

  1. Run cable diagnostics after repeated CRC incidents
  2. Keep a version-specific diagnostic command reference
  3. Document Layer 3 island limitations in branch network designs
  4. Monitor discovery protocol changes after uplink moves

Explanation

Correct Answer

A:

The team should run cable diagnostics after repeated CRC incidents. That recurring practice targets the same weakness, namely that copper faults can affect negotiation independently of Layer 2 configuration.

Incorrect Answers

B:

Keep a version-specific diagnostic command reference. That safeguard would help prevent recurrence of: Controller-side diagnostic information can distinguish authorization management and link problems. The risk being reviewed here is instead: Copper faults can affect negotiation independently of Layer 2 configuration. The matching ongoing control is: Run cable diagnostics after repeated CRC incidents.

C:

That routine supports fortilink island l2 span assumption, but the relevant ongoing risk requires the team to run cable diagnostics after repeated CRC incidents. For the Maplehaven multisite IT support team, the direct corrective action is to use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies.

D:

Monitor discovery protocol changes after uplink moves. That safeguard would help prevent recurrence of: Missing or altered discovery frames can prevent automatic topology association. The risk being reviewed here is instead: Copper faults can affect negotiation independently of Layer 2 configuration. The matching ongoing control is: Run cable diagnostics after repeated CRC incidents.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests