McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 87

Question 860

At the Maplehaven multisite IT support team, a desk port negotiates unexpectedly low speed following a patch-panel change. How should the organization sustain the improvement?

  1. Run cable diagnostics after repeated CRC incidents
  2. Keep a version-specific diagnostic command reference
  3. Document Layer 3 island limitations in branch network designs
  4. Monitor discovery protocol changes after uplink moves

Explanation

Correct Answer

A:

The team should run cable diagnostics after repeated CRC incidents. That recurring practice targets the same weakness, namely that copper faults can affect negotiation independently of Layer 2 configuration.

Incorrect Answers

B:

Keep a version-specific diagnostic command reference. That safeguard would help prevent recurrence of: Controller-side diagnostic information can distinguish authorization management and link problems. The risk being reviewed here is instead: Copper faults can affect negotiation independently of Layer 2 configuration. The matching ongoing control is: Run cable diagnostics after repeated CRC incidents.

C:

That routine supports fortilink island l2 span assumption, but the relevant ongoing risk requires the team to run cable diagnostics after repeated CRC incidents. For the Maplehaven multisite IT support team, the direct corrective action is to use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies.

D:

Monitor discovery protocol changes after uplink moves. That safeguard would help prevent recurrence of: Missing or altered discovery frames can prevent automatic topology association. The risk being reviewed here is instead: Copper faults can affect negotiation independently of Layer 2 configuration. The matching ongoing control is: Run cable diagnostics after repeated CRC incidents.

Question 861

At the Willowford campus infrastructure group, several access points randomly reboot after a building adds security cameras. Which approach best resolves the described issue?

  1. Inspect current DHCP snooping dynamic bindings and source guard association for the affected port
  2. Remove unsupported NAT from the FortiLink management path or redesign the topology
  3. Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch
  4. Clear the retired identity and authorize the replacement using the supported managed-switch procedure

Explanation

Correct Answer

C:

This solution addresses the stated limitation: an exhausted PoE power budget can interrupt otherwise healthy network links. Implementing it means the team should inspect per-port and chassis PoE consumption and supply state on the FortiSwitch, then verify that a peak-load test shows adequate watts for the critical access points.

Incorrect Answers

A:

Inspect current DHCP snooping dynamic bindings and source guard association for the affected port can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch. For the Willowford campus infrastructure group, the direct corrective action is to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

B:

The offered action is: Remove unsupported NAT from the FortiLink management path or redesign the topology. It is associated with this separate technical condition: FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. The actual incident concerns a different dependency: An exhausted PoE power budget can interrupt otherwise healthy network links. The corresponding change is: Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

D:

Clear the retired identity and authorize the replacement using the supported managed-switch procedure addresses a different kind of problem: management associations are tied to switch serial identity and cannot be assumed transferable. Here the reported weakness is that an exhausted PoE power budget can interrupt otherwise healthy network links. For the Willowford campus infrastructure group, the direct corrective action is to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

Question 862

At the Willowford campus infrastructure group, several access points randomly reboot after a building adds security cameras. Which explanation best accounts for the concern?

  1. An exhausted PoE power budget can interrupt otherwise healthy network links
  2. Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone
  3. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS
  4. Management associations are tied to switch serial identity and cannot be assumed transferable

Explanation

Correct Answer

A:

The strongest explanation is that an exhausted PoE power budget can interrupt otherwise healthy network links. This accounts for the outcome and supports the action to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

Incorrect Answers

B:

Although layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone, the presented symptoms do not support that as the primary cause; they indicate that an exhausted PoE power budget can interrupt otherwise healthy network links. For the Willowford campus infrastructure group, the direct corrective action is to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

C:

The offered principle is: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. In the source material it is associated with: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. This case has a different controlling cause: An exhausted PoE power budget can interrupt otherwise healthy network links. Its keyed mechanism is: An exhausted PoE power budget can interrupt otherwise healthy network links.

D:

Management associations are tied to switch serial identity and cannot be assumed transferable. That may occur elsewhere, but the evidence at the Willowford campus infrastructure group instead points to the fact that an exhausted PoE power budget can interrupt otherwise healthy network links.

Question 863

At the Willowford campus infrastructure group, several access points randomly reboot after a building adds security cameras. Which test result best shows the requirement is met?

  1. A timestamped test identifies the failing hop and matches its diagnostic evidence
  2. A peak-load test shows adequate watts for the critical access points
  3. The same test connection becomes visible with corrected filter parameters
  4. The requested test conversation appears without an overflowed capture buffer

Explanation

Correct Answer

B:

This is the relevant acceptance result: a peak-load test shows adequate watts for the critical access points. It demonstrates the outcome of choosing to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

Incorrect Answers

A:

A timestamped test identifies the failing hop and matches its diagnostic evidence. That result would test a control for this other failure: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The question instead requires evidence for: An exhausted PoE power budget can interrupt otherwise healthy network links. The direct outcome to verify is: A peak-load test shows adequate watts for the critical access points.

C:

The same test connection becomes visible with corrected filter parameters. That result would test a control for this other failure: An overly narrow or outdated filter can hide valid traffic from the analyst. The question instead requires evidence for: An exhausted PoE power budget can interrupt otherwise healthy network links. The direct outcome to verify is: A peak-load test shows adequate watts for the critical access points.

D:

At the Willowford campus infrastructure group, a result about selective capture to avoid overload would not show that the team corrected the failure where an exhausted PoE power budget can interrupt otherwise healthy network links.

Question 864

At the Willowford campus infrastructure group, several access points randomly reboot after a building adds security cameras. Which ongoing control best prevents this issue from recurring?

  1. Run cable diagnostics after repeated CRC incidents
  2. Monitor switch-controller process health and FortiLink sessions
  3. Retest FortiLink status after HA membership changes
  4. Track PoE capacity alarms whenever new devices are powered

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to track PoE capacity alarms whenever new devices are powered.

Incorrect Answers

A:

That routine supports fortiswitch cable tester, but the relevant ongoing risk requires the team to track PoE capacity alarms whenever new devices are powered. For the Willowford campus infrastructure group, the direct corrective action is to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

B:

Monitor switch-controller process health and FortiLink sessions. That safeguard would help prevent recurrence of: A shared controller service problem can affect several managed devices at once. The risk being reviewed here is instead: An exhausted PoE power budget can interrupt otherwise healthy network links. The matching ongoing control is: Track PoE capacity alarms whenever new devices are powered.

C:

Retest FortiLink status after HA membership changes is not the primary recurring safeguard for this problem. The team should track PoE capacity alarms whenever new devices are powered. For the Willowford campus infrastructure group, the direct corrective action is to inspect per-port and chassis PoE consumption and supply state on the FortiSwitch.

Question 865

At the Pinewick network security team, a file transfer suffers intermittent loss while the interface reports an overall link-up state. Which implementation choice best addresses the situation?

  1. Compare interface CRC errors discards and utilization under known traffic load
  2. Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface
  3. Create a supported packet-capture profile on the actual traffic-carrying physical or system interface
  4. Clear the retired identity and authorize the replacement using the supported managed-switch procedure

Explanation

Correct Answer

A:

This solution addresses the stated limitation: an operational link can still drop or corrupt frames because of media or congestion. Implementing it means the team should compare interface CRC errors discards and utilization under known traffic load, then verify that error counters correlate with the problem and stop increasing after repair.

Incorrect Answers

B:

Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface addresses a different kind of problem: layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. Here the reported weakness is that an operational link can still drop or corrupt frames because of media or congestion. For the Pinewick network security team, the direct corrective action is to compare interface CRC errors discards and utilization under known traffic load.

C:

The option addresses the separate situation where a capture from the wrong interface cannot show the target packet path. For this case, the more appropriate response is to compare interface CRC errors discards and utilization under known traffic load. For the Pinewick network security team, the direct corrective action is to compare interface CRC errors discards and utilization under known traffic load.

D:

The offered alternative is: Clear the retired identity and authorize the replacement using the supported managed-switch procedure. It addresses this separate failure mode: Management associations are tied to switch serial identity and cannot be assumed transferable. In the current case, the observed mechanism is: An operational link can still drop or corrupt frames because of media or congestion. The keyed action, Compare interface CRC errors discards and utilization under known traffic load., targets that condition more directly.

Question 866

At the Pinewick network security team, a file transfer suffers intermittent loss while the interface reports an overall link-up state. What risk should the team identify as the primary issue?

  1. An operational link can still drop or corrupt frames because of media or congestion
  2. A general firewall health summary omits per-switch physical and managed-port details
  3. User VLAN forwarding can survive while the specific controller management path is broken
  4. FortiLink over Layer 3 requires functional routed controller reachability

Explanation

Correct Answer

A:

The situation shows that an operational link can still drop or corrupt frames because of media or congestion, rather than merely a monitoring or presentation issue. Remediation is to compare interface CRC errors discards and utilization under known traffic load.

Incorrect Answers

B:

A general firewall health summary omits per-switch physical and managed-port details. That may occur elsewhere, but the evidence at the Pinewick network security team instead points to the fact that an operational link can still drop or corrupt frames because of media or congestion.

C:

The offered alternative is: User VLAN forwarding can survive while the specific controller management path is broken. It addresses this separate failure mode: User VLAN forwarding can survive while the specific controller management path is broken. In the current case, the observed mechanism is: An operational link can still drop or corrupt frames because of media or congestion. The keyed action, An operational link can still drop or corrupt frames because of media or congestion., targets that condition more directly.

D:

FortiLink over Layer 3 requires functional routed controller reachability. That is not the mechanism that accounts for the stated failure at the Pinewick network security team.

Question 867

At the Pinewick network security team, a file transfer suffers intermittent loss while the interface reports an overall link-up state. What is the strongest acceptance test for this change?

  1. A peak-load test shows adequate watts for the critical access points
  2. The trunk capture shows the expected VLAN IDs for the test service
  3. All downstream serial numbers reappear when the ISL is restored
  4. Error counters correlate with the problem and stop increasing after repair

Explanation

Correct Answer

D:

The intended correction is to compare interface CRC errors discards and utilization under known traffic load. The decisive verification is that error counters correlate with the problem and stop increasing after repair, rather than only confirming configuration was saved.

Incorrect Answers

A:

A peak-load test shows adequate watts for the critical access points. That result would test a control for this other failure: An exhausted PoE power budget can interrupt otherwise healthy network links. The question instead requires evidence for: An operational link can still drop or corrupt frames because of media or congestion. The direct outcome to verify is: Error counters correlate with the problem and stop increasing after repair.

B:

At the Pinewick network security team, a result about vlan tag capture position would not show that the team corrected the failure where an operational link can still drop or corrupt frames because of media or congestion.

C:

All downstream serial numbers reappear when the ISL is restored. That result would test a control for this other failure: A failed parent-child inter-switch link can isolate multiple downstream managed devices. The question instead requires evidence for: An operational link can still drop or corrupt frames because of media or congestion. The direct outcome to verify is: Error counters correlate with the problem and stop increasing after repair.

Question 868

At the Pinewick network security team, a file transfer suffers intermittent loss while the interface reports an overall link-up state. Which setting or practice should be reviewed in future?

  1. Review root and alternate-port states following link changes
  2. Document expected split-interface port states for monitoring
  3. Document Layer 3 island limitations in branch network designs
  4. Baseline and trend physical port errors continuously

Explanation

Correct Answer

D:

For the Pinewick network security team, this maintenance action preserves the fix: baseline and trend physical port errors continuously. It should be revisited as the workload evolves.

Incorrect Answers

A:

Review root and alternate-port states following link changes is not the primary recurring safeguard for this problem. The team should baseline and trend physical port errors continuously. For the Pinewick network security team, the direct corrective action is to compare interface CRC errors discards and utilization under known traffic load.

B:

Document expected split-interface port states for monitoring. That safeguard would help prevent recurrence of: An intentionally standby split-interface link may not forward until failover. The risk being reviewed here is instead: An operational link can still drop or corrupt frames because of media or congestion. The matching ongoing control is: Baseline and trend physical port errors continuously.

C:

The suggested preventive check is: Document Layer 3 island limitations in branch network designs. Its technical scope concerns: Routed FortiLink management does not transport a continuous VLAN data path between the sites. This question asks how to sustain control over: An operational link can still drop or corrupt frames because of media or congestion. The more targeted safeguard is: Baseline and trend physical port errors continuously.

Question 869

At the Cedarport managed-network provider, a standalone FortiSwitch has an unexpected default route causing application timeouts. Which corrective action best meets the requirement?

  1. Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface
  2. Inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately
  3. Capture on the trunk or a supported mirrored path where VLAN tags should be visible
  4. Inspect FortiGate switch-controller service logs and management state before resetting every switch

Explanation

Correct Answer

B:

The primary failure mode is that routing decisions depend on active installed routes and reachable next hops. The proposed action directly fixes it by requiring the team to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately; afterward, verify that the correct intended route is installed and a traceroute follows it.

Incorrect Answers

A:

The option addresses the separate situation where layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. For this case, the more appropriate response is to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately. For the Cedarport managed-network provider, the direct corrective action is to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately.

C:

Capture on the trunk or a supported mirrored path where VLAN tags should be visible can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately. For the Cedarport managed-network provider, the direct corrective action is to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately.

D:

The offered alternative is: Inspect FortiGate switch-controller service logs and management state before resetting every switch. It addresses this separate failure mode: A shared controller service problem can affect several managed devices at once. In the current case, the observed mechanism is: Routing decisions depend on active installed routes and reachable next hops. The keyed action, Inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately., targets that condition more directly.

Question 870

At the Cedarport managed-network provider, a standalone FortiSwitch has an unexpected default route causing application timeouts. Which underlying issue most directly explains this situation?

  1. A healthy port can be intentionally blocked by spanning tree to prevent a loop
  2. Management associations are tied to switch serial identity and cannot be assumed transferable
  3. Routing decisions depend on active installed routes and reachable next hops
  4. FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller

Explanation

Correct Answer

C:

The strongest explanation is that routing decisions depend on active installed routes and reachable next hops. This accounts for the outcome and supports the action to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately.

Incorrect Answers

A:

The offered principle is: A healthy port can be intentionally blocked by spanning tree to prevent a loop. In the source material it is associated with: A healthy port can be intentionally blocked by spanning tree to prevent a loop. This case has a different controlling cause: Routing decisions depend on active installed routes and reachable next hops. Its keyed mechanism is: Routing decisions depend on active installed routes and reachable next hops.

B:

Management associations are tied to switch serial identity and cannot be assumed transferable. That is not the mechanism that accounts for the stated failure at the Cedarport managed-network provider.

D:

Although fortiLink over Layer 3 does not support NAT between the FortiSwitch and controller, the presented symptoms do not support that as the primary cause; they indicate that routing decisions depend on active installed routes and reachable next hops. For the Cedarport managed-network provider, the direct corrective action is to inspect the supported routing table and selected next-hop rather than changing VLAN definitions immediately.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests