McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 89

Question 880

At the Dartwood LAN operations group, a sensitive service remains reachable despite a deployed ACL and the operator does not know if rules match. Which setting or practice should be reviewed in future?

  1. Monitor switch system resource trends during peak hours
  2. Monitor ACL policy hits after every security rule change
  3. Document expected split-interface port states for monitoring
  4. Confirm address and VLAN bindings at the start of a capture

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to monitor ACL policy hits after every security rule change.

Incorrect Answers

A:

Monitor switch system resource trends during peak hours is not the primary recurring safeguard for this problem. The team should monitor ACL policy hits after every security rule change. For the Dartwood LAN operations group, the direct corrective action is to read supported ACL hit counters and policy attachment scope for the target packet path.

C:

The suggested preventive check is: Document expected split-interface port states for monitoring. Its technical scope concerns: An intentionally standby split-interface link may not forward until failover. This question asks how to sustain control over: A filter with no matching hits may be incorrectly ordered attached or classified. The more targeted safeguard is: Monitor ACL policy hits after every security rule change.

D:

Confirm address and VLAN bindings at the start of a capture. That safeguard would help prevent recurrence of: An overly narrow or outdated filter can hide valid traffic from the analyst. The risk being reviewed here is instead: A filter with no matching hits may be incorrectly ordered attached or classified. The matching ongoing control is: Monitor ACL policy hits after every security rule change.

Question 881

At the Silverport regional network integrator, an operator needs FortiSwitch managed status and FortiLink topology details absent from the current graphical view. Which corrective action best meets the requirement?

  1. Use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state
  2. Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch
  3. Check switch authorization state and approve the correct serial under site change control
  4. Capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state. The observed risk is that controller-side diagnostic information can distinguish authorization management and link problems; a passing acceptance check would show that the diagnostic output identifies the intended member and its control-plane state.

Incorrect Answers

B:

The offered action is: Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch. It is associated with this separate technical condition: An exhausted PoE power budget can interrupt otherwise healthy network links. The actual incident concerns a different dependency: Controller-side diagnostic information can distinguish authorization management and link problems. The corresponding change is: Use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state.

C:

Check switch authorization state and approve the correct serial under site change control can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state. For the Silverport regional network integrator, the direct corrective action is to use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state.

D:

The offered alternative is: Capture approved DHCP exchanges at the access port and server-facing boundary to locate the missing reply. It addresses this separate failure mode: The DHCP failure could occur before relay or after server response and needs packet-level isolation. In the current case, the observed mechanism is: Controller-side diagnostic information can distinguish authorization management and link problems. The keyed action, Use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state., targets that condition more directly.

Question 882

At the Silverport regional network integrator, an operator needs FortiSwitch managed status and FortiLink topology details absent from the current graphical view. Which underlying issue most directly explains this situation?

  1. A filter with no matching hits may be incorrectly ordered attached or classified
  2. Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding
  3. Controller-side diagnostic information can distinguish authorization management and link problems
  4. A rogue ARP sender can impersonate an IP address without changing DHCP lease records

Explanation

Correct Answer

C:

The strongest explanation is that controller-side diagnostic information can distinguish authorization management and link problems. This accounts for the outcome and supports the action to use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state.

Incorrect Answers

A:

The offered principle is: A filter with no matching hits may be incorrectly ordered attached or classified. In the source material it is associated with: A filter with no matching hits may be incorrectly ordered attached or classified. This case has a different controlling cause: Controller-side diagnostic information can distinguish authorization management and link problems. Its keyed mechanism is: Controller-side diagnostic information can distinguish authorization management and link problems.

B:

Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. That is not the mechanism that accounts for the stated failure at the Silverport regional network integrator.

D:

Although a rogue ARP sender can impersonate an IP address without changing DHCP lease records, the presented symptoms do not support that as the primary cause; they indicate that controller-side diagnostic information can distinguish authorization management and link problems. For the Silverport regional network integrator, the direct corrective action is to use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state.

Question 883

At the Silverport regional network integrator, an operator needs FortiSwitch managed status and FortiLink topology details absent from the current graphical view. What evidence would justify considering this concern addressed?

  1. A seeded resource spike matches the reported process and clears after remediation
  2. The new serial appears with intended port configuration and the retired one is inactive
  3. The correct switch serial is discovered after the FortiLink port path is repaired
  4. The diagnostic output identifies the intended member and its control-plane state

Explanation

Correct Answer

D:

This is the relevant acceptance result: the diagnostic output identifies the intended member and its control-plane state. It demonstrates the outcome of choosing to use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state.

Incorrect Answers

A:

A seeded resource spike matches the reported process and clears after remediation. That result would test a control for this other failure: Control-plane resource contention can cause slow management and protocol updates without saturated data links. The question instead requires evidence for: Controller-side diagnostic information can distinguish authorization management and link problems. The direct outcome to verify is: The diagnostic output identifies the intended member and its control-plane state.

B:

The offered observation is: The new serial appears with intended port configuration and the retired one is inactive. It would support the separate mechanism: Management associations are tied to switch serial identity and cannot be assumed transferable. In this case the decisive dependency is: Controller-side diagnostic information can distinguish authorization management and link problems. The original keyed verification is: The diagnostic output identifies the intended member and its control-plane state.

C:

The correct switch serial is discovered after the FortiLink port path is repaired. That result would test a control for this other failure: Power state alone cannot prove the management discovery path is physically or logically available. The question instead requires evidence for: Controller-side diagnostic information can distinguish authorization management and link problems. The direct outcome to verify is: The diagnostic output identifies the intended member and its control-plane state.

Question 884

At the Silverport regional network integrator, an operator needs FortiSwitch managed status and FortiLink topology details absent from the current graphical view. How should the organization sustain the improvement?

  1. Reconcile topology discovery after rack moves
  2. Keep a version-specific diagnostic command reference
  3. Audit management VLAN changes on inter-switch trunks
  4. Collect baseline retransmission measurements for critical applications

Explanation

Correct Answer

B:

For the Silverport regional network integrator, this maintenance action preserves the fix: keep a version-specific diagnostic command reference. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Reconcile topology discovery after rack moves. Its technical scope concerns: Stale drawings cannot establish the actual physical adjacent device identity. This question asks how to sustain control over: Controller-side diagnostic information can distinguish authorization management and link problems. The more targeted safeguard is: Keep a version-specific diagnostic command reference.

C:

That routine supports fortilink management vlan mismatch, but the relevant ongoing risk requires the team to keep a version-specific diagnostic command reference. For the Silverport regional network integrator, the direct corrective action is to use documented FortiGate switch-controller diagnostics for authorized switch serials and FortiLink state.

D:

Collect baseline retransmission measurements for critical applications. That safeguard would help prevent recurrence of: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The risk being reviewed here is instead: Controller-side diagnostic information can distinguish authorization management and link problems. The matching ongoing control is: Keep a version-specific diagnostic command reference.

Question 885

At the Elmhurst multisite IT support team, user complaints increase but interface counters look clean while switch management becomes sluggish. Which approach best resolves the described issue?

  1. Inspect current DHCP snooping dynamic bindings and source guard association for the affected port
  2. Inspect system CPU memory and management-process health using supported diagnostics
  3. Remove unsupported NAT from the FortiLink management path or redesign the topology
  4. Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink

Explanation

Correct Answer

B:

For the Elmhurst multisite IT support team, the appropriate correction is to inspect system CPU memory and management-process health using supported diagnostics. The decisive reason is that control-plane resource contention can cause slow management and protocol updates without saturated data links; acceptance evidence is that a seeded resource spike matches the reported process and clears after remediation.

Incorrect Answers

A:

Inspect current DHCP snooping dynamic bindings and source guard association for the affected port can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect system CPU memory and management-process health using supported diagnostics. For the Elmhurst multisite IT support team, the direct corrective action is to inspect system CPU memory and management-process health using supported diagnostics.

C:

This alternative would be suitable where fortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. It does not by itself resolve the need to inspect system CPU memory and management-process health using supported diagnostics. For the Elmhurst multisite IT support team, the direct corrective action is to inspect system CPU memory and management-process health using supported diagnostics.

D:

Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink addresses a different kind of problem: missing or unexpected STP BPDUs affect safe root election and redundant-port states. Here the reported weakness is that control-plane resource contention can cause slow management and protocol updates without saturated data links. For the Elmhurst multisite IT support team, the direct corrective action is to inspect system CPU memory and management-process health using supported diagnostics.

Question 886

At the Elmhurst multisite IT support team, user complaints increase but interface counters look clean while switch management becomes sluggish. Which explanation best accounts for the concern?

  1. A filter with no matching hits may be incorrectly ordered attached or classified
  2. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS
  3. A rogue ARP sender can impersonate an IP address without changing DHCP lease records
  4. Control-plane resource contention can cause slow management and protocol updates without saturated data links

Explanation

Correct Answer

D:

This identifies the root issue: control-plane resource contention can cause slow management and protocol updates without saturated data links. At the Elmhurst multisite IT support team, the team should therefore inspect system CPU memory and management-process health using supported diagnostics.

Incorrect Answers

A:

The offered principle is: A filter with no matching hits may be incorrectly ordered attached or classified. In the source material it is associated with: A filter with no matching hits may be incorrectly ordered attached or classified. This case has a different controlling cause: Control-plane resource contention can cause slow management and protocol updates without saturated data links. Its keyed mechanism is: Control-plane resource contention can cause slow management and protocol updates without saturated data links.

B:

Although missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS, the presented symptoms do not support that as the primary cause; they indicate that control-plane resource contention can cause slow management and protocol updates without saturated data links. For the Elmhurst multisite IT support team, the direct corrective action is to inspect system CPU memory and management-process health using supported diagnostics.

C:

The offered principle is: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. In the source material it is associated with: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. This case has a different controlling cause: Control-plane resource contention can cause slow management and protocol updates without saturated data links. Its keyed mechanism is: Control-plane resource contention can cause slow management and protocol updates without saturated data links.

Question 887

At the Elmhurst multisite IT support team, user complaints increase but interface counters look clean while switch management becomes sluggish. Which test result best shows the requirement is met?

  1. The correct intended route is installed and a traceroute follows it
  2. Disconnecting the active path activates the intended standby and preserves management
  3. A seeded resource spike matches the reported process and clears after remediation
  4. The new serial appears with intended port configuration and the retired one is inactive

Explanation

Correct Answer

C:

Because control-plane resource contention can cause slow management and protocol updates without saturated data links, the required evidence must show that a seeded resource spike matches the reported process and clears after remediation. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

The correct intended route is installed and a traceroute follows it. That result would test a control for this other failure: Routing decisions depend on active installed routes and reachable next hops. The question instead requires evidence for: Control-plane resource contention can cause slow management and protocol updates without saturated data links. The direct outcome to verify is: A seeded resource spike matches the reported process and clears after remediation.

B:

The offered observation is: Disconnecting the active path activates the intended standby and preserves management. It would support the separate mechanism: An intentionally standby split-interface link may not forward until failover. In this case the decisive dependency is: Control-plane resource contention can cause slow management and protocol updates without saturated data links. The original keyed verification is: A seeded resource spike matches the reported process and clears after remediation.

D:

At the Elmhurst multisite IT support team, a result about fortilink switch identity stale would not show that the team corrected the failure where control-plane resource contention can cause slow management and protocol updates without saturated data links.

Question 888

At the Elmhurst multisite IT support team, user complaints increase but interface counters look clean while switch management becomes sluggish. Which ongoing control best prevents this issue from recurring?

  1. Monitor ACL policy hits after every security rule change
  2. Monitor switch system resource trends during peak hours
  3. Alert on MCLAG peer and ICL alarms
  4. Audit management VLAN changes on inter-switch trunks

Explanation

Correct Answer

B:

The needed prevention is to monitor switch system resource trends during peak hours. It directly sustains the original change to inspect system CPU memory and management-process health using supported diagnostics.

Incorrect Answers

A:

That routine supports fortiswitch acl counters, but the relevant ongoing risk requires the team to monitor switch system resource trends during peak hours. For the Elmhurst multisite IT support team, the direct corrective action is to inspect system CPU memory and management-process health using supported diagnostics.

C:

Alert on MCLAG peer and ICL alarms is not the primary recurring safeguard for this problem. The team should monitor switch system resource trends during peak hours. For the Elmhurst multisite IT support team, the direct corrective action is to inspect system CPU memory and management-process health using supported diagnostics.

D:

Audit management VLAN changes on inter-switch trunks. That safeguard would help prevent recurrence of: User VLAN forwarding can survive while the specific controller management path is broken. The risk being reviewed here is instead: Control-plane resource contention can cause slow management and protocol updates without saturated data links. The matching ongoing control is: Monitor switch system resource trends during peak hours.

Question 889

At the Riverbrook campus infrastructure group, an operations diagram shows a switch attached to the wrong upstream peer after cabling repairs. Which implementation choice best addresses the situation?

  1. Inspect supported transceiver optical power and temperature diagnostics with physical error counters
  2. Capture IGMP membership reports and queries on the affected VLAN alongside snooping state
  3. Extract LLDP chassis and port neighbor data and compare with the approved topology
  4. Inspect the affected upstream ISL and its auto-discovery or static trunk configuration

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: extract LLDP chassis and port neighbor data and compare with the approved topology. The observed risk is that stale drawings cannot establish the actual physical adjacent device identity; a passing acceptance check would show that the neighbor table identifies the correct peer and revised documentation matches the wiring.

Incorrect Answers

A:

This alternative would be suitable where low receive power or thermal degradation may cause intermittent link failures. It does not by itself resolve the need to extract LLDP chassis and port neighbor data and compare with the approved topology. For the Riverbrook campus infrastructure group, the direct corrective action is to extract LLDP chassis and port neighbor data and compare with the approved topology.

B:

Capture IGMP membership reports and queries on the affected VLAN alongside snooping state addresses a different kind of problem: missing group reports or querier traffic can prevent membership learning. Here the reported weakness is that stale drawings cannot establish the actual physical adjacent device identity. For the Riverbrook campus infrastructure group, the direct corrective action is to extract LLDP chassis and port neighbor data and compare with the approved topology.

D:

The offered alternative is: Inspect the affected upstream ISL and its auto-discovery or static trunk configuration. It addresses this separate failure mode: A failed parent-child inter-switch link can isolate multiple downstream managed devices. In the current case, the observed mechanism is: Stale drawings cannot establish the actual physical adjacent device identity. The keyed action, Extract LLDP chassis and port neighbor data and compare with the approved topology., targets that condition more directly.

Question 890

At the Riverbrook campus infrastructure group, an operations diagram shows a switch attached to the wrong upstream peer after cabling repairs. What risk should the team identify as the primary issue?

  1. No single data source proves whether frames were dropped locally or later by routing or firewall policy
  2. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  3. Stale drawings cannot establish the actual physical adjacent device identity
  4. An overly narrow or outdated filter can hide valid traffic from the analyst

Explanation

Correct Answer

C:

The evidence indicates that stale drawings cannot establish the actual physical adjacent device identity. The appropriate response is to extract LLDP chassis and port neighbor data and compare with the approved topology and demonstrate that the neighbor table identifies the correct peer and revised documentation matches the wiring.

Incorrect Answers

A:

The offered action is: No single data source proves whether frames were dropped locally or later by routing or firewall policy. It is associated with this separate technical condition: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The actual incident concerns a different dependency: Stale drawings cannot establish the actual physical adjacent device identity. The corresponding change is: Stale drawings cannot establish the actual physical adjacent device identity.

B:

The DHCP failure could occur before relay or after server response and needs packet-level isolation. That may occur elsewhere, but the evidence at the Riverbrook campus infrastructure group instead points to the fact that stale drawings cannot establish the actual physical adjacent device identity.

D:

An overly narrow or outdated filter can hide valid traffic from the analyst. That is not the mechanism that accounts for the stated failure at the Riverbrook campus infrastructure group.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests