McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 90

Question 890

At the Riverbrook campus infrastructure group, an operations diagram shows a switch attached to the wrong upstream peer after cabling repairs. What risk should the team identify as the primary issue?

  1. No single data source proves whether frames were dropped locally or later by routing or firewall policy
  2. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  3. Stale drawings cannot establish the actual physical adjacent device identity
  4. An overly narrow or outdated filter can hide valid traffic from the analyst

Explanation

Correct Answer

C:

The evidence indicates that stale drawings cannot establish the actual physical adjacent device identity. The appropriate response is to extract LLDP chassis and port neighbor data and compare with the approved topology and demonstrate that the neighbor table identifies the correct peer and revised documentation matches the wiring.

Incorrect Answers

A:

The offered action is: No single data source proves whether frames were dropped locally or later by routing or firewall policy. It is associated with this separate technical condition: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The actual incident concerns a different dependency: Stale drawings cannot establish the actual physical adjacent device identity. The corresponding change is: Stale drawings cannot establish the actual physical adjacent device identity.

B:

The DHCP failure could occur before relay or after server response and needs packet-level isolation. That may occur elsewhere, but the evidence at the Riverbrook campus infrastructure group instead points to the fact that stale drawings cannot establish the actual physical adjacent device identity.

D:

An overly narrow or outdated filter can hide valid traffic from the analyst. That is not the mechanism that accounts for the stated failure at the Riverbrook campus infrastructure group.

Question 891

At the Riverbrook campus infrastructure group, an operations diagram shows a switch attached to the wrong upstream peer after cabling repairs. What is the strongest acceptance test for this change?

  1. The diagnostic output identifies the intended member and its control-plane state
  2. Disconnecting the active path activates the intended standby and preserves management
  3. The trace contains only necessary metadata or approved payload and is stored under access controls
  4. The neighbor table identifies the correct peer and revised documentation matches the wiring

Explanation

Correct Answer

D:

The intended correction is to extract LLDP chassis and port neighbor data and compare with the approved topology. The decisive verification is that the neighbor table identifies the correct peer and revised documentation matches the wiring, rather than only confirming configuration was saved.

Incorrect Answers

A:

The diagnostic output identifies the intended member and its control-plane state. That result would test a control for this other failure: Controller-side diagnostic information can distinguish authorization management and link problems. The question instead requires evidence for: Stale drawings cannot establish the actual physical adjacent device identity. The direct outcome to verify is: The neighbor table identifies the correct peer and revised documentation matches the wiring.

B:

At the Riverbrook campus infrastructure group, a result about fortilink split interface mistaken failure would not show that the team corrected the failure where stale drawings cannot establish the actual physical adjacent device identity.

C:

The trace contains only necessary metadata or approved payload and is stored under access controls. That result would test a control for this other failure: Network diagnostic captures may expose credentials or customer information unrelated to the incident. The question instead requires evidence for: Stale drawings cannot establish the actual physical adjacent device identity. The direct outcome to verify is: The neighbor table identifies the correct peer and revised documentation matches the wiring.

Question 892

At the Riverbrook campus infrastructure group, an operations diagram shows a switch attached to the wrong upstream peer after cabling repairs. Which setting or practice should be reviewed in future?

  1. Track PoE capacity alarms whenever new devices are powered
  2. Reconcile topology discovery after rack moves
  3. Monitor controller reachability across routed WAN changes
  4. Update site serial inventory with every RMA

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to reconcile topology discovery after rack moves.

Incorrect Answers

A:

Track PoE capacity alarms whenever new devices are powered is not the primary recurring safeguard for this problem. The team should reconcile topology discovery after rack moves. For the Riverbrook campus infrastructure group, the direct corrective action is to extract LLDP chassis and port neighbor data and compare with the approved topology.

C:

The suggested preventive check is: Monitor controller reachability across routed WAN changes. Its technical scope concerns: FortiLink over Layer 3 requires functional routed controller reachability. This question asks how to sustain control over: Stale drawings cannot establish the actual physical adjacent device identity. The more targeted safeguard is: Reconcile topology discovery after rack moves.

D:

Update site serial inventory with every RMA. That safeguard would help prevent recurrence of: Management associations are tied to switch serial identity and cannot be assumed transferable. The risk being reviewed here is instead: Stale drawings cannot establish the actual physical adjacent device identity. The matching ongoing control is: Reconcile topology discovery after rack moves.

Question 893

At the Foxhaven network security team, a fleet shows inconsistent behavior after a staged upgrade and administrators cannot tell which units remain on the old software. Which corrective action best meets the requirement?

  1. Extract LLDP chassis and port neighbor data and compare with the approved topology
  2. Apply narrow capture filters and reasonable sampling windows to the target traffic
  3. Capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters
  4. Query managed switch inventory for software version and hardware model before further change

Explanation

Correct Answer

D:

For the Foxhaven network security team, the appropriate correction is to query managed switch inventory for software version and hardware model before further change. The decisive reason is that a partial firmware rollout can leave incompatible configuration behavior among devices; acceptance evidence is that the inventory shows the expected pilot version groups and flags remaining outliers.

Incorrect Answers

A:

The option addresses the separate situation where stale drawings cannot establish the actual physical adjacent device identity. For this case, the more appropriate response is to query managed switch inventory for software version and hardware model before further change. For the Foxhaven network security team, the direct corrective action is to query managed switch inventory for software version and hardware model before further change.

B:

The offered action is: Apply narrow capture filters and reasonable sampling windows to the target traffic. It is associated with this separate technical condition: Broad captures can exhaust limited capture memory and omit useful packets. The actual incident concerns a different dependency: A partial firmware rollout can leave incompatible configuration behavior among devices. The corresponding change is: Query managed switch inventory for software version and hardware model before further change.

C:

Capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to query managed switch inventory for software version and hardware model before further change. For the Foxhaven network security team, the direct corrective action is to query managed switch inventory for software version and hardware model before further change.

Question 894

At the Foxhaven network security team, a fleet shows inconsistent behavior after a staged upgrade and administrators cannot tell which units remain on the old software. Which underlying issue most directly explains this situation?

  1. Controller-side diagnostic information can distinguish authorization management and link problems
  2. A partial firmware rollout can leave incompatible configuration behavior among devices
  3. A failed parent-child inter-switch link can isolate multiple downstream managed devices
  4. An incompatible controller and switch software combination can disrupt FortiLink management

Explanation

Correct Answer

B:

The architectural weakness is that a partial firmware rollout can leave incompatible configuration behavior among devices. It can be addressed through the controlled change to query managed switch inventory for software version and hardware model before further change.

Incorrect Answers

A:

The offered principle is: Controller-side diagnostic information can distinguish authorization management and link problems. In the source material it is associated with: Controller-side diagnostic information can distinguish authorization management and link problems. This case has a different controlling cause: A partial firmware rollout can leave incompatible configuration behavior among devices. Its keyed mechanism is: A partial firmware rollout can leave incompatible configuration behavior among devices.

C:

The offered principle is: A failed parent-child inter-switch link can isolate multiple downstream managed devices. In the source material it is associated with: A failed parent-child inter-switch link can isolate multiple downstream managed devices. This case has a different controlling cause: A partial firmware rollout can leave incompatible configuration behavior among devices. Its keyed mechanism is: A partial firmware rollout can leave incompatible configuration behavior among devices.

D:

Although an incompatible controller and switch software combination can disrupt FortiLink management, the presented symptoms do not support that as the primary cause; they indicate that a partial firmware rollout can leave incompatible configuration behavior among devices. For the Foxhaven network security team, the direct corrective action is to query managed switch inventory for software version and hardware model before further change.

Question 895

At the Foxhaven network security team, a fleet shows inconsistent behavior after a staged upgrade and administrators cannot tell which units remain on the old software. What evidence would justify considering this concern addressed?

  1. The inventory shows the expected pilot version groups and flags remaining outliers
  2. The correct renewed lease binding appears and legitimate traffic passes
  3. The requested test conversation appears without an overflowed capture buffer
  4. A controlled authentication shows EAPOL exchange at the port and a corresponding RADIUS attempt

Explanation

Correct Answer

A:

This tests the real business behavior: the inventory shows the expected pilot version groups and flags remaining outliers. It specifically checks whether the risk that a partial firmware rollout can leave incompatible configuration behavior among devices has been reduced.

Incorrect Answers

B:

The offered observation is: The correct renewed lease binding appears and legitimate traffic passes. It would support the separate mechanism: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. In this case the decisive dependency is: A partial firmware rollout can leave incompatible configuration behavior among devices. The original keyed verification is: The inventory shows the expected pilot version groups and flags remaining outliers.

C:

The requested test conversation appears without an overflowed capture buffer. That result would test a control for this other failure: Broad captures can exhaust limited capture memory and omit useful packets. The question instead requires evidence for: A partial firmware rollout can leave incompatible configuration behavior among devices. The direct outcome to verify is: The inventory shows the expected pilot version groups and flags remaining outliers.

D:

The offered observation is: A controlled authentication shows EAPOL exchange at the port and a corresponding RADIUS attempt. It would support the separate mechanism: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. In this case the decisive dependency is: A partial firmware rollout can leave incompatible configuration behavior among devices. The original keyed verification is: The inventory shows the expected pilot version groups and flags remaining outliers.

Question 896

At the Foxhaven network security team, a fleet shows inconsistent behavior after a staged upgrade and administrators cannot tell which units remain on the old software. How should the organization sustain the improvement?

  1. Maintain a cross-device evidence checklist for switch incidents
  2. Monitor controller reachability across routed WAN changes
  3. Update site serial inventory with every RMA
  4. Publish firmware inventory after each upgrade wave

Explanation

Correct Answer

D:

The needed prevention is to publish firmware inventory after each upgrade wave. It directly sustains the original change to query managed switch inventory for software version and hardware model before further change.

Incorrect Answers

A:

The suggested preventive check is: Maintain a cross-device evidence checklist for switch incidents. Its technical scope concerns: No single data source proves whether frames were dropped locally or later by routing or firewall policy. This question asks how to sustain control over: A partial firmware rollout can leave incompatible configuration behavior among devices. The more targeted safeguard is: Publish firmware inventory after each upgrade wave.

B:

Monitor controller reachability across routed WAN changes. That safeguard would help prevent recurrence of: FortiLink over Layer 3 requires functional routed controller reachability. The risk being reviewed here is instead: A partial firmware rollout can leave incompatible configuration behavior among devices. The matching ongoing control is: Publish firmware inventory after each upgrade wave.

C:

That routine supports fortilink switch identity stale, but the relevant ongoing risk requires the team to publish firmware inventory after each upgrade wave. For the Foxhaven network security team, the direct corrective action is to query managed switch inventory for software version and hardware model before further change.

Question 897

At the Whitford enterprise network team, a helpdesk concludes switch congestion causes timeouts but flow evidence suggests the issue is upstream of the access layer. Which approach best resolves the described issue?

  1. Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies
  2. Verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate
  3. Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path
  4. Remove unsupported NAT from the FortiLink management path or redesign the topology

Explanation

Correct Answer

C:

This solution addresses the stated limitation: no single data source proves whether frames were dropped locally or later by routing or firewall policy. Implementing it means the team should correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path, then verify that a timestamped test identifies the failing hop and matches its diagnostic evidence.

Incorrect Answers

A:

Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path. For the Whitford enterprise network team, the direct corrective action is to correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path.

B:

The offered action is: Verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate. It is associated with this separate technical condition: Power state alone cannot prove the management discovery path is physically or logically available. The actual incident concerns a different dependency: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The corresponding change is: Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path.

D:

Remove unsupported NAT from the FortiLink management path or redesign the topology addresses a different kind of problem: fortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. Here the reported weakness is that no single data source proves whether frames were dropped locally or later by routing or firewall policy. For the Whitford enterprise network team, the direct corrective action is to correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path.

Question 898

At the Whitford enterprise network team, a helpdesk concludes switch congestion causes timeouts but flow evidence suggests the issue is upstream of the access layer. Which explanation best accounts for the concern?

  1. No single data source proves whether frames were dropped locally or later by routing or firewall policy
  2. Low receive power or thermal degradation may cause intermittent link failures
  3. Management associations are tied to switch serial identity and cannot be assumed transferable
  4. Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS

Explanation

Correct Answer

A:

The strongest explanation is that no single data source proves whether frames were dropped locally or later by routing or firewall policy. This accounts for the outcome and supports the action to correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path.

Incorrect Answers

B:

Although low receive power or thermal degradation may cause intermittent link failures, the presented symptoms do not support that as the primary cause; they indicate that no single data source proves whether frames were dropped locally or later by routing or firewall policy. For the Whitford enterprise network team, the direct corrective action is to correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path.

C:

The offered principle is: Management associations are tied to switch serial identity and cannot be assumed transferable. In the source material it is associated with: Management associations are tied to switch serial identity and cannot be assumed transferable. This case has a different controlling cause: No single data source proves whether frames were dropped locally or later by routing or firewall policy. Its keyed mechanism is: No single data source proves whether frames were dropped locally or later by routing or firewall policy.

D:

Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. That may occur elsewhere, but the evidence at the Whitford enterprise network team instead points to the fact that no single data source proves whether frames were dropped locally or later by routing or firewall policy.

Question 899

At the Whitford enterprise network team, a helpdesk concludes switch congestion causes timeouts but flow evidence suggests the issue is upstream of the access layer. Which test result best shows the requirement is met?

  1. A timestamped test identifies the failing hop and matches its diagnostic evidence
  2. The correct renewed lease binding appears and legitimate traffic passes
  3. The downstream switch is rediscovered and the neighbor table records its port
  4. Matching timestamps isolate whether forward or return traffic disappears at the firewall boundary

Explanation

Correct Answer

A:

At the Whitford enterprise network team, evidence that a timestamped test identifies the failing hop and matches its diagnostic evidence directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: The correct renewed lease binding appears and legitimate traffic passes. It would support the separate mechanism: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. In this case the decisive dependency is: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The original keyed verification is: A timestamped test identifies the failing hop and matches its diagnostic evidence.

C:

The downstream switch is rediscovered and the neighbor table records its port. That result would test a control for this other failure: The controller cannot build its intended neighbor map if required discovery frames are suppressed. The question instead requires evidence for: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The direct outcome to verify is: A timestamped test identifies the failing hop and matches its diagnostic evidence.

D:

At the Whitford enterprise network team, a result about port capture versus fortigate capture would not show that the team corrected the failure where no single data source proves whether frames were dropped locally or later by routing or firewall policy.

Question 900

At the Whitford enterprise network team, a helpdesk concludes switch congestion causes timeouts but flow evidence suggests the issue is upstream of the access layer. Which ongoing control best prevents this issue from recurring?

  1. Maintain a cross-device evidence checklist for switch incidents
  2. Review route snapshots after gateway updates
  3. Document expected split-interface port states for monitoring
  4. Include EAPOL trace validation in wired-authentication incident templates

Explanation

Correct Answer

A:

The continuing safeguard is to maintain a cross-device evidence checklist for switch incidents. It helps avoid the original condition: no single data source proves whether frames were dropped locally or later by routing or firewall policy.

Incorrect Answers

B:

Review route snapshots after gateway updates. That safeguard would help prevent recurrence of: Routing decisions depend on active installed routes and reachable next hops. The risk being reviewed here is instead: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The matching ongoing control is: Maintain a cross-device evidence checklist for switch incidents.

C:

Document expected split-interface port states for monitoring is not the primary recurring safeguard for this problem. The team should maintain a cross-device evidence checklist for switch incidents. For the Whitford enterprise network team, the direct corrective action is to correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path.

D:

Include EAPOL trace validation in wired-authentication incident templates. That safeguard would help prevent recurrence of: Missing supplicant EAPOL traffic indicates the authentication flow may not reach RADIUS. The risk being reviewed here is instead: No single data source proves whether frames were dropped locally or later by routing or firewall policy. The matching ongoing control is: Maintain a cross-device evidence checklist for switch incidents.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests