McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 84

Question 830

At the Uptonbridge infrastructure service operator, a FortiGate cluster switches primary member and managed switch inventory disappears temporarily. What risk should the team identify as the primary issue?

  1. FortiLink over Layer 3 requires functional routed controller reachability
  2. Copper faults can affect negotiation independently of Layer 2 configuration
  3. A newly active FortiGate must have a valid path to its managed FortiSwitch environment
  4. A rogue ARP sender can impersonate an IP address without changing DHCP lease records

Explanation

Correct Answer

C:

The evidence indicates that a newly active FortiGate must have a valid path to its managed FortiSwitch environment. The appropriate response is to validate supported FortiLink HA topology and both members' management uplink connectivity and demonstrate that a test HA transition preserves authorized inventory and required services.

Incorrect Answers

A:

The offered action is: FortiLink over Layer 3 requires functional routed controller reachability. It is associated with this separate technical condition: FortiLink over Layer 3 requires functional routed controller reachability. The actual incident concerns a different dependency: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The corresponding change is: A newly active FortiGate must have a valid path to its managed FortiSwitch environment.

B:

Copper faults can affect negotiation independently of Layer 2 configuration. That may occur elsewhere, but the evidence at the Uptonbridge infrastructure service operator instead points to the fact that a newly active FortiGate must have a valid path to its managed FortiSwitch environment.

D:

A rogue ARP sender can impersonate an IP address without changing DHCP lease records. That is not the mechanism that accounts for the stated failure at the Uptonbridge infrastructure service operator.

Question 831

At the Uptonbridge infrastructure service operator, a FortiGate cluster switches primary member and managed switch inventory disappears temporarily. What is the strongest acceptance test for this change?

  1. A test HA transition preserves authorized inventory and required services
  2. Both peers recover healthy state and the dual-homed client survives a member outage
  3. The neighbor table identifies the correct peer and revised documentation matches the wiring
  4. A seeded blocked flow increments the expected rule and does not reach the service

Explanation

Correct Answer

A:

Because a newly active FortiGate must have a valid path to its managed FortiSwitch environment, the required evidence must show that a test HA transition preserves authorized inventory and required services. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Uptonbridge infrastructure service operator, a result about fortilink mclag peer degradation would not show that the team corrected the failure where a newly active FortiGate must have a valid path to its managed FortiSwitch environment.

C:

The neighbor table identifies the correct peer and revised documentation matches the wiring. That result would test a control for this other failure: Stale drawings cannot establish the actual physical adjacent device identity. The question instead requires evidence for: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The direct outcome to verify is: A test HA transition preserves authorized inventory and required services.

D:

The offered observation is: A seeded blocked flow increments the expected rule and does not reach the service. It would support the separate mechanism: A filter with no matching hits may be incorrectly ordered attached or classified. In this case the decisive dependency is: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The original keyed verification is: A test HA transition preserves authorized inventory and required services.

Question 832

At the Uptonbridge infrastructure service operator, a FortiGate cluster switches primary member and managed switch inventory disappears temporarily. Which setting or practice should be reviewed in future?

  1. Retest FortiLink status after HA membership changes
  2. Monitor controller reachability across routed WAN changes
  3. Retain a standard DHCP packet capture filter in troubleshooting runbooks
  4. Keep multicast capture filters for video service investigations

Explanation

Correct Answer

A:

After implementation, the team should retest FortiLink status after HA membership changes as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Monitor controller reachability across routed WAN changes. That safeguard would help prevent recurrence of: FortiLink over Layer 3 requires functional routed controller reachability. The risk being reviewed here is instead: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The matching ongoing control is: Retest FortiLink status after HA membership changes.

C:

The suggested preventive check is: Retain a standard DHCP packet capture filter in troubleshooting runbooks. Its technical scope concerns: The DHCP failure could occur before relay or after server response and needs packet-level isolation. This question asks how to sustain control over: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The more targeted safeguard is: Retest FortiLink status after HA membership changes.

D:

Keep multicast capture filters for video service investigations. That safeguard would help prevent recurrence of: Missing group reports or querier traffic can prevent membership learning. The risk being reviewed here is instead: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The matching ongoing control is: Retest FortiLink status after HA membership changes.

Question 833

At the Juniperford enterprise network team, controller inventory still associates the old switch serial with a port after an emergency hardware replacement. Which corrective action best meets the requirement?

  1. Clear the retired identity and authorize the replacement using the supported managed-switch procedure
  2. Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters
  3. Synchronize switch and FortiGate clocks before correlating packet-capture events
  4. Query managed switch inventory for software version and hardware model before further change

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: clear the retired identity and authorize the replacement using the supported managed-switch procedure. The observed risk is that management associations are tied to switch serial identity and cannot be assumed transferable; a passing acceptance check would show that the new serial appears with intended port configuration and the retired one is inactive.

Incorrect Answers

B:

The offered action is: Check FortiOS and FortiSwitchOS version compatibility before changing discovery parameters. It is associated with this separate technical condition: An incompatible controller and switch software combination can disrupt FortiLink management. The actual incident concerns a different dependency: Management associations are tied to switch serial identity and cannot be assumed transferable. The corresponding change is: Clear the retired identity and authorize the replacement using the supported managed-switch procedure.

C:

Synchronize switch and FortiGate clocks before correlating packet-capture events can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to clear the retired identity and authorize the replacement using the supported managed-switch procedure. For the Juniperford enterprise network team, the direct corrective action is to clear the retired identity and authorize the replacement using the supported managed-switch procedure.

D:

The offered alternative is: Query managed switch inventory for software version and hardware model before further change. It addresses this separate failure mode: A partial firmware rollout can leave incompatible configuration behavior among devices. In the current case, the observed mechanism is: Management associations are tied to switch serial identity and cannot be assumed transferable. The keyed action, Clear the retired identity and authorize the replacement using the supported managed-switch procedure., targets that condition more directly.

Question 834

At the Juniperford enterprise network team, controller inventory still associates the old switch serial with a port after an emergency hardware replacement. Which underlying issue most directly explains this situation?

  1. Management associations are tied to switch serial identity and cannot be assumed transferable
  2. An incompatible controller and switch software combination can disrupt FortiLink management
  3. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  4. Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets

Explanation

Correct Answer

A:

The evidence indicates that management associations are tied to switch serial identity and cannot be assumed transferable. The appropriate response is to clear the retired identity and authorize the replacement using the supported managed-switch procedure and demonstrate that the new serial appears with intended port configuration and the retired one is inactive.

Incorrect Answers

B:

An incompatible controller and switch software combination can disrupt FortiLink management. That is not the mechanism that accounts for the stated failure at the Juniperford enterprise network team.

C:

The offered principle is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. In the source material it is associated with: The DHCP failure could occur before relay or after server response and needs packet-level isolation. This case has a different controlling cause: Management associations are tied to switch serial identity and cannot be assumed transferable. Its keyed mechanism is: Management associations are tied to switch serial identity and cannot be assumed transferable.

D:

Although stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets, the presented symptoms do not support that as the primary cause; they indicate that management associations are tied to switch serial identity and cannot be assumed transferable. For the Juniperford enterprise network team, the direct corrective action is to clear the retired identity and authorize the replacement using the supported managed-switch procedure.

Question 835

At the Juniperford enterprise network team, controller inventory still associates the old switch serial with a port after an emergency hardware replacement. What evidence would justify considering this concern addressed?

  1. The intended device transitions to authorized and receives the correct port settings
  2. The new serial appears with intended port configuration and the retired one is inactive
  3. The current endpoint MAC appears on the newly cabled approved port
  4. The measured optic value returns to a supported range after component repair

Explanation

Correct Answer

B:

The intended correction is to clear the retired identity and authorize the replacement using the supported managed-switch procedure. The decisive verification is that the new serial appears with intended port configuration and the retired one is inactive, rather than only confirming configuration was saved.

Incorrect Answers

A:

The intended device transitions to authorized and receives the correct port settings. That result would test a control for this other failure: Controller discovery and authorization are separate stages of managed provisioning. The question instead requires evidence for: Management associations are tied to switch serial identity and cannot be assumed transferable. The direct outcome to verify is: The new serial appears with intended port configuration and the retired one is inactive.

C:

The current endpoint MAC appears on the newly cabled approved port. That result would test a control for this other failure: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The question instead requires evidence for: Management associations are tied to switch serial identity and cannot be assumed transferable. The direct outcome to verify is: The new serial appears with intended port configuration and the retired one is inactive.

D:

The offered observation is: The measured optic value returns to a supported range after component repair. It would support the separate mechanism: Low receive power or thermal degradation may cause intermittent link failures. In this case the decisive dependency is: Management associations are tied to switch serial identity and cannot be assumed transferable. The original keyed verification is: The new serial appears with intended port configuration and the retired one is inactive.

Question 836

At the Juniperford enterprise network team, controller inventory still associates the old switch serial with a port after an emergency hardware replacement. How should the organization sustain the improvement?

  1. Update site serial inventory with every RMA
  2. Alert on MCLAG peer and ICL alarms
  3. Keep multicast capture filters for video service investigations
  4. Monitor ACL policy hits after every security rule change

Explanation

Correct Answer

A:

The team should update site serial inventory with every RMA. That recurring practice targets the same weakness, namely that management associations are tied to switch serial identity and cannot be assumed transferable.

Incorrect Answers

B:

Alert on MCLAG peer and ICL alarms. That safeguard would help prevent recurrence of: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The risk being reviewed here is instead: Management associations are tied to switch serial identity and cannot be assumed transferable. The matching ongoing control is: Update site serial inventory with every RMA.

C:

That routine supports multicast igmp report trace, but the relevant ongoing risk requires the team to update site serial inventory with every RMA. For the Juniperford enterprise network team, the direct corrective action is to clear the retired identity and authorize the replacement using the supported managed-switch procedure.

D:

Monitor ACL policy hits after every security rule change. That safeguard would help prevent recurrence of: A filter with no matching hits may be incorrectly ordered attached or classified. The risk being reviewed here is instead: Management associations are tied to switch serial identity and cannot be assumed transferable. The matching ongoing control is: Update site serial inventory with every RMA.

Question 837

At the Brookfield network modernization program, many managed switches become unreachable simultaneously despite working physical links and IP addresses. Which approach best resolves the described issue?

  1. Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link
  2. Inspect FortiGate switch-controller service logs and management state before resetting every switch
  3. Inspect system CPU memory and management-process health using supported diagnostics
  4. Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault

Explanation

Correct Answer

B:

For the Brookfield network modernization program, the appropriate correction is to inspect FortiGate switch-controller service logs and management state before resetting every switch. The decisive reason is that a shared controller service problem can affect several managed devices at once; acceptance evidence is that controller recovery restores switch sessions without unnecessary per-device reboots.

Incorrect Answers

A:

Use local VLANs and routed services rather than expecting a shared Layer 2 segment over the FortiLink Layer 3 link can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to inspect FortiGate switch-controller service logs and management state before resetting every switch. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

C:

This alternative would be suitable where control-plane resource contention can cause slow management and protocol updates without saturated data links. It does not by itself resolve the need to inspect FortiGate switch-controller service logs and management state before resetting every switch. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

D:

Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault addresses a different kind of problem: an overly narrow or outdated filter can hide valid traffic from the analyst. Here the reported weakness is that a shared controller service problem can affect several managed devices at once. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

Question 838

At the Brookfield network modernization program, many managed switches become unreachable simultaneously despite working physical links and IP addresses. Which explanation best accounts for the concern?

  1. The controller cannot build its intended neighbor map if required discovery frames are suppressed
  2. A capture from the wrong interface cannot show the target packet path
  3. A shared controller service problem can affect several managed devices at once
  4. A rogue ARP sender can impersonate an IP address without changing DHCP lease records

Explanation

Correct Answer

C:

The situation shows that a shared controller service problem can affect several managed devices at once, rather than merely a monitoring or presentation issue. Remediation is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

Incorrect Answers

A:

The offered principle is: The controller cannot build its intended neighbor map if required discovery frames are suppressed. In the source material it is associated with: The controller cannot build its intended neighbor map if required discovery frames are suppressed. This case has a different controlling cause: A shared controller service problem can affect several managed devices at once. Its keyed mechanism is: A shared controller service problem can affect several managed devices at once.

B:

Although a capture from the wrong interface cannot show the target packet path, the presented symptoms do not support that as the primary cause; they indicate that a shared controller service problem can affect several managed devices at once. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

D:

A rogue ARP sender can impersonate an IP address without changing DHCP lease records. That may occur elsewhere, but the evidence at the Brookfield network modernization program instead points to the fact that a shared controller service problem can affect several managed devices at once.

Question 839

At the Brookfield network modernization program, many managed switches become unreachable simultaneously despite working physical links and IP addresses. Which test result best shows the requirement is met?

  1. Both peers recover healthy state and the dual-homed client survives a member outage
  2. The neighbor table identifies the correct peer and revised documentation matches the wiring
  3. Controller recovery restores switch sessions without unnecessary per-device reboots
  4. A seeded blocked flow increments the expected rule and does not reach the service

Explanation

Correct Answer

C:

Because a shared controller service problem can affect several managed devices at once, the required evidence must show that controller recovery restores switch sessions without unnecessary per-device reboots. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

Both peers recover healthy state and the dual-homed client survives a member outage. That result would test a control for this other failure: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The question instead requires evidence for: A shared controller service problem can affect several managed devices at once. The direct outcome to verify is: Controller recovery restores switch sessions without unnecessary per-device reboots.

B:

The offered observation is: The neighbor table identifies the correct peer and revised documentation matches the wiring. It would support the separate mechanism: Stale drawings cannot establish the actual physical adjacent device identity. In this case the decisive dependency is: A shared controller service problem can affect several managed devices at once. The original keyed verification is: Controller recovery restores switch sessions without unnecessary per-device reboots.

D:

At the Brookfield network modernization program, a result about fortiswitch acl counters would not show that the team corrected the failure where a shared controller service problem can affect several managed devices at once.

Question 840

At the Brookfield network modernization program, many managed switches become unreachable simultaneously despite working physical links and IP addresses. Which ongoing control best prevents this issue from recurring?

  1. Alert on MCLAG peer and ICL alarms
  2. Monitor switch-controller process health and FortiLink sessions
  3. Include EAPOL trace validation in wired-authentication incident templates
  4. Check trusted NTP status before distributed capture sessions

Explanation

Correct Answer

B:

The needed prevention is to monitor switch-controller process health and FortiLink sessions. It directly sustains the original change to inspect FortiGate switch-controller service logs and management state before resetting every switch.

Incorrect Answers

A:

That routine supports fortilink mclag peer degradation, but the relevant ongoing risk requires the team to monitor switch-controller process health and FortiLink sessions. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

C:

Include EAPOL trace validation in wired-authentication incident templates is not the primary recurring safeguard for this problem. The team should monitor switch-controller process health and FortiLink sessions. For the Brookfield network modernization program, the direct corrective action is to inspect FortiGate switch-controller service logs and management state before resetting every switch.

D:

Check trusted NTP status before distributed capture sessions. That safeguard would help prevent recurrence of: Unsynchronized device clocks can make a correct event sequence appear contradictory. The risk being reviewed here is instead: A shared controller service problem can affect several managed devices at once. The matching ongoing control is: Monitor switch-controller process health and FortiLink sessions.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests