McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 79

Question 780

At the Northport managed-network provider, an engineer creates a packet capture filter for a retired endpoint IP and concludes the FortiSwitch forwards nothing. Which ongoing control best prevents this issue from recurring?

  1. Collect baseline retransmission measurements for critical applications
  2. Confirm address and VLAN bindings at the start of a capture
  3. Test upgrade compatibility in a staging environment first
  4. Audit management VLAN changes on inter-switch trunks

Explanation

Correct Answer

B:

The needed prevention is to confirm address and VLAN bindings at the start of a capture. It directly sustains the original change to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

Incorrect Answers

A:

That routine supports tcp retransmission analysis, but the relevant ongoing risk requires the team to confirm address and VLAN bindings at the start of a capture. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

C:

Test upgrade compatibility in a staging environment first is not the primary recurring safeguard for this problem. The team should confirm address and VLAN bindings at the start of a capture. For the Northport managed-network provider, the direct corrective action is to validate the endpoint's current IP and correct the capture filter before diagnosing a link fault.

D:

Audit management VLAN changes on inter-switch trunks. That safeguard would help prevent recurrence of: User VLAN forwarding can survive while the specific controller management path is broken. The risk being reviewed here is instead: An overly narrow or outdated filter can hide valid traffic from the analyst. The matching ongoing control is: Confirm address and VLAN bindings at the start of a capture.

Question 781

At the Maplehaven network modernization program, a newly installed managed FortiSwitch remains absent from controller inventory even though its power light is on. Which implementation choice best addresses the situation?

  1. Verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate
  2. Validate supported FortiLink HA topology and both members' management uplink connectivity
  3. Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch
  4. Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink

Explanation

Correct Answer

A:

This solution addresses the stated limitation: power state alone cannot prove the management discovery path is physically or logically available. Implementing it means the team should verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate, then verify that the correct switch serial is discovered after the FortiLink port path is repaired.

Incorrect Answers

B:

Validate supported FortiLink HA topology and both members' management uplink connectivity addresses a different kind of problem: a newly active FortiGate must have a valid path to its managed FortiSwitch environment. Here the reported weakness is that power state alone cannot prove the management discovery path is physically or logically available. For the Maplehaven network modernization program, the direct corrective action is to verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate.

C:

The option addresses the separate situation where an exhausted PoE power budget can interrupt otherwise healthy network links. For this case, the more appropriate response is to verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate. For the Maplehaven network modernization program, the direct corrective action is to verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate.

D:

The offered alternative is: Use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink. It addresses this separate failure mode: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. In the current case, the observed mechanism is: Power state alone cannot prove the management discovery path is physically or logically available. The keyed action, Verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate., targets that condition more directly.

Question 782

At the Maplehaven network modernization program, a newly installed managed FortiSwitch remains absent from controller inventory even though its power light is on. What risk should the team identify as the primary issue?

  1. An incompatible controller and switch software combination can disrupt FortiLink management
  2. Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets
  3. Power state alone cannot prove the management discovery path is physically or logically available
  4. The DHCP failure could occur before relay or after server response and needs packet-level isolation

Explanation

Correct Answer

C:

The evidence indicates that power state alone cannot prove the management discovery path is physically or logically available. The appropriate response is to verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate and demonstrate that the correct switch serial is discovered after the FortiLink port path is repaired.

Incorrect Answers

A:

The offered action is: An incompatible controller and switch software combination can disrupt FortiLink management. It is associated with this separate technical condition: An incompatible controller and switch software combination can disrupt FortiLink management. The actual incident concerns a different dependency: Power state alone cannot prove the management discovery path is physically or logically available. The corresponding change is: Power state alone cannot prove the management discovery path is physically or logically available.

B:

Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. That may occur elsewhere, but the evidence at the Maplehaven network modernization program instead points to the fact that power state alone cannot prove the management discovery path is physically or logically available.

D:

The DHCP failure could occur before relay or after server response and needs packet-level isolation. That is not the mechanism that accounts for the stated failure at the Maplehaven network modernization program.

Question 783

At the Maplehaven network modernization program, a newly installed managed FortiSwitch remains absent from controller inventory even though its power light is on. What is the strongest acceptance test for this change?

  1. Disconnecting the active path activates the intended standby and preserves management
  2. A subscriber emits a valid report and only authorized receiver ports forward the stream
  3. The correct renewed lease binding appears and legitimate traffic passes
  4. The correct switch serial is discovered after the FortiLink port path is repaired

Explanation

Correct Answer

D:

The intended correction is to verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate. The decisive verification is that the correct switch serial is discovered after the FortiLink port path is repaired, rather than only confirming configuration was saved.

Incorrect Answers

A:

Disconnecting the active path activates the intended standby and preserves management. That result would test a control for this other failure: An intentionally standby split-interface link may not forward until failover. The question instead requires evidence for: Power state alone cannot prove the management discovery path is physically or logically available. The direct outcome to verify is: The correct switch serial is discovered after the FortiLink port path is repaired.

B:

At the Maplehaven network modernization program, a result about multicast igmp report trace would not show that the team corrected the failure where power state alone cannot prove the management discovery path is physically or logically available.

C:

The correct renewed lease binding appears and legitimate traffic passes. That result would test a control for this other failure: Stale or absent IP-to-MAC-to-port bindings can reject otherwise valid packets. The question instead requires evidence for: Power state alone cannot prove the management discovery path is physically or logically available. The direct outcome to verify is: The correct switch serial is discovered after the FortiLink port path is repaired.

Question 784

At the Maplehaven network modernization program, a newly installed managed FortiSwitch remains absent from controller inventory even though its power light is on. Which setting or practice should be reviewed in future?

  1. Update site serial inventory with every RMA
  2. Preserve a short ARP capture for repeated gateway impersonation incidents
  3. Test new FortiLink cabling during site commissioning
  4. Record MAC movement information during desk-move incidents

Explanation

Correct Answer

C:

The team should test new FortiLink cabling during site commissioning. That recurring practice targets the same weakness, namely that power state alone cannot prove the management discovery path is physically or logically available.

Incorrect Answers

A:

Update site serial inventory with every RMA is not the primary recurring safeguard for this problem. The team should test new FortiLink cabling during site commissioning. For the Maplehaven network modernization program, the direct corrective action is to verify the FortiLink-facing port cable link and supported discovery role from switch to FortiGate.

B:

Preserve a short ARP capture for repeated gateway impersonation incidents. That safeguard would help prevent recurrence of: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. The risk being reviewed here is instead: Power state alone cannot prove the management discovery path is physically or logically available. The matching ongoing control is: Test new FortiLink cabling during site commissioning.

D:

Record MAC movement information during desk-move incidents. That safeguard would help prevent recurrence of: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The risk being reviewed here is instead: Power state alone cannot prove the management discovery path is physically or logically available. The matching ongoing control is: Test new FortiLink cabling during site commissioning.

Question 785

At the Ashbourne LAN operations group, a FortiSwitch appears as discovered but never receives its normal managed VLAN configuration. Which corrective action best meets the requirement?

  1. Inspect the affected upstream ISL and its auto-discovery or static trunk configuration
  2. Extract LLDP chassis and port neighbor data and compare with the approved topology
  3. Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path
  4. Check switch authorization state and approve the correct serial under site change control

Explanation

Correct Answer

D:

For the Ashbourne LAN operations group, the appropriate correction is to check switch authorization state and approve the correct serial under site change control. The decisive reason is that controller discovery and authorization are separate stages of managed provisioning; acceptance evidence is that the intended device transitions to authorized and receives the correct port settings.

Incorrect Answers

A:

The option addresses the separate situation where a failed parent-child inter-switch link can isolate multiple downstream managed devices. For this case, the more appropriate response is to check switch authorization state and approve the correct serial under site change control. For the Ashbourne LAN operations group, the direct corrective action is to check switch authorization state and approve the correct serial under site change control.

B:

The offered action is: Extract LLDP chassis and port neighbor data and compare with the approved topology. It is associated with this separate technical condition: Stale drawings cannot establish the actual physical adjacent device identity. The actual incident concerns a different dependency: Controller discovery and authorization are separate stages of managed provisioning. The corresponding change is: Check switch authorization state and approve the correct serial under site change control.

C:

Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to check switch authorization state and approve the correct serial under site change control. For the Ashbourne LAN operations group, the direct corrective action is to check switch authorization state and approve the correct serial under site change control.

Question 786

At the Ashbourne LAN operations group, a FortiSwitch appears as discovered but never receives its normal managed VLAN configuration. Which underlying issue most directly explains this situation?

  1. Controller discovery and authorization are separate stages of managed provisioning
  2. Routed FortiLink management does not transport a continuous VLAN data path between the sites
  3. Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone
  4. Missing or unexpected STP BPDUs affect safe root election and redundant-port states

Explanation

Correct Answer

A:

The evidence indicates that controller discovery and authorization are separate stages of managed provisioning. The appropriate response is to check switch authorization state and approve the correct serial under site change control and demonstrate that the intended device transitions to authorized and receives the correct port settings.

Incorrect Answers

B:

Routed FortiLink management does not transport a continuous VLAN data path between the sites. That is not the mechanism that accounts for the stated failure at the Ashbourne LAN operations group.

C:

The offered principle is: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. In the source material it is associated with: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. This case has a different controlling cause: Controller discovery and authorization are separate stages of managed provisioning. Its keyed mechanism is: Controller discovery and authorization are separate stages of managed provisioning.

D:

Although missing or unexpected STP BPDUs affect safe root election and redundant-port states, the presented symptoms do not support that as the primary cause; they indicate that controller discovery and authorization are separate stages of managed provisioning. For the Ashbourne LAN operations group, the direct corrective action is to check switch authorization state and approve the correct serial under site change control.

Question 787

At the Ashbourne LAN operations group, a FortiSwitch appears as discovered but never receives its normal managed VLAN configuration. What evidence would justify considering this concern addressed?

  1. A single-link fault test converges without a broadcast storm or lost member
  2. Both members exchange compatible LACP parameters and become active
  3. The intended device transitions to authorized and receives the correct port settings
  4. The trunk capture shows the expected VLAN IDs for the test service

Explanation

Correct Answer

C:

At the Ashbourne LAN operations group, evidence that the intended device transitions to authorized and receives the correct port settings directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

A single-link fault test converges without a broadcast storm or lost member. That result would test a control for this other failure: A redundant path cannot preserve operation if the topology enters an unsupported loop or multiple failures. The question instead requires evidence for: Controller discovery and authorization are separate stages of managed provisioning. The direct outcome to verify is: The intended device transitions to authorized and receives the correct port settings.

B:

The offered observation is: Both members exchange compatible LACP parameters and become active. It would support the separate mechanism: A physical link can stay up while LACP partner agreement remains incomplete. In this case the decisive dependency is: Controller discovery and authorization are separate stages of managed provisioning. The original keyed verification is: The intended device transitions to authorized and receives the correct port settings.

D:

The offered observation is: The trunk capture shows the expected VLAN IDs for the test service. It would support the separate mechanism: Access-port observations may not include tags that are present on inter-switch trunks. In this case the decisive dependency is: Controller discovery and authorization are separate stages of managed provisioning. The original keyed verification is: The intended device transitions to authorized and receives the correct port settings.

Question 788

At the Ashbourne LAN operations group, a FortiSwitch appears as discovered but never receives its normal managed VLAN configuration. How should the organization sustain the improvement?

  1. Audit management VLAN changes on inter-switch trunks
  2. Preserve a short ARP capture for repeated gateway impersonation incidents
  3. Review pending authorization inventory each week
  4. Record MAC movement information during desk-move incidents

Explanation

Correct Answer

C:

The continuing safeguard is to review pending authorization inventory each week. It helps avoid the original condition: controller discovery and authorization are separate stages of managed provisioning.

Incorrect Answers

A:

The suggested preventive check is: Audit management VLAN changes on inter-switch trunks. Its technical scope concerns: User VLAN forwarding can survive while the specific controller management path is broken. This question asks how to sustain control over: Controller discovery and authorization are separate stages of managed provisioning. The more targeted safeguard is: Review pending authorization inventory each week.

B:

Preserve a short ARP capture for repeated gateway impersonation incidents. That safeguard would help prevent recurrence of: A rogue ARP sender can impersonate an IP address without changing DHCP lease records. The risk being reviewed here is instead: Controller discovery and authorization are separate stages of managed provisioning. The matching ongoing control is: Review pending authorization inventory each week.

D:

Record MAC movement information during desk-move incidents. That safeguard would help prevent recurrence of: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The risk being reviewed here is instead: Controller discovery and authorization are separate stages of managed provisioning. The matching ongoing control is: Review pending authorization inventory each week.

Question 789

At the Quayside regional network integrator, switch uplinks carry user data but the FortiGate cannot manage the switch after a VLAN change. Which approach best resolves the described issue?

  1. Inspect the affected upstream ISL and its auto-discovery or static trunk configuration
  2. Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface
  3. Capture IGMP membership reports and queries on the affected VLAN alongside snooping state
  4. Restore the approved FortiLink management VLAN reachability and trunk membership

Explanation

Correct Answer

D:

Restore the approved FortiLink management VLAN reachability and trunk membership is the best response because user VLAN forwarding can survive while the specific controller management path is broken. A focused validation would establish that the switch regains a stable controller session while user forwarding remains correct.

Incorrect Answers

A:

Inspect the affected upstream ISL and its auto-discovery or static trunk configuration can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to restore the approved FortiLink management VLAN reachability and trunk membership. For the Quayside regional network integrator, the direct corrective action is to restore the approved FortiLink management VLAN reachability and trunk membership.

B:

The offered action is: Inspect the FortiSwitch learned MAC table and correlate it to VLAN and physical interface. It is associated with this separate technical condition: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The actual incident concerns a different dependency: User VLAN forwarding can survive while the specific controller management path is broken. The corresponding change is: Restore the approved FortiLink management VLAN reachability and trunk membership.

C:

This alternative would be suitable where missing group reports or querier traffic can prevent membership learning. It does not by itself resolve the need to restore the approved FortiLink management VLAN reachability and trunk membership. For the Quayside regional network integrator, the direct corrective action is to restore the approved FortiLink management VLAN reachability and trunk membership.

Question 790

At the Quayside regional network integrator, switch uplinks carry user data but the FortiGate cannot manage the switch after a VLAN change. Which explanation best accounts for the concern?

  1. Power state alone cannot prove the management discovery path is physically or logically available
  2. User VLAN forwarding can survive while the specific controller management path is broken
  3. Application slowness cannot be attributed to switching congestion without traffic-level evidence
  4. A capture from the wrong interface cannot show the target packet path

Explanation

Correct Answer

B:

The problem stems from the fact that user VLAN forwarding can survive while the specific controller management path is broken. A correct solution would restore the approved FortiLink management VLAN reachability and trunk membership and check that the switch regains a stable controller session while user forwarding remains correct.

Incorrect Answers

A:

The offered principle is: Power state alone cannot prove the management discovery path is physically or logically available. In the source material it is associated with: Power state alone cannot prove the management discovery path is physically or logically available. This case has a different controlling cause: User VLAN forwarding can survive while the specific controller management path is broken. Its keyed mechanism is: User VLAN forwarding can survive while the specific controller management path is broken.

C:

The offered principle is: Application slowness cannot be attributed to switching congestion without traffic-level evidence. In the source material it is associated with: Application slowness cannot be attributed to switching congestion without traffic-level evidence. This case has a different controlling cause: User VLAN forwarding can survive while the specific controller management path is broken. Its keyed mechanism is: User VLAN forwarding can survive while the specific controller management path is broken.

D:

A capture from the wrong interface cannot show the target packet path. That may occur elsewhere, but the evidence at the Quayside regional network integrator instead points to the fact that user VLAN forwarding can survive while the specific controller management path is broken.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests