McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 76

Question 750

At the Harborwick managed-network provider, a newly connected access switch causes topology changes and the team assumes no BPDUs are received. Which underlying issue most directly explains this situation?

  1. Missing or altered discovery frames can prevent automatic topology association
  2. A failed parent-child inter-switch link can isolate multiple downstream managed devices
  3. Missing or unexpected STP BPDUs affect safe root election and redundant-port states
  4. Management associations are tied to switch serial identity and cannot be assumed transferable

Explanation

Correct Answer

C:

The strongest explanation is that missing or unexpected STP BPDUs affect safe root election and redundant-port states. This accounts for the outcome and supports the action to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

Incorrect Answers

A:

The offered principle is: Missing or altered discovery frames can prevent automatic topology association. In the source material it is associated with: Missing or altered discovery frames can prevent automatic topology association. This case has a different controlling cause: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. Its keyed mechanism is: Missing or unexpected STP BPDUs affect safe root election and redundant-port states.

B:

A failed parent-child inter-switch link can isolate multiple downstream managed devices. That is not the mechanism that accounts for the stated failure at the Harborwick managed-network provider.

D:

Although management associations are tied to switch serial identity and cannot be assumed transferable, the presented symptoms do not support that as the primary cause; they indicate that missing or unexpected STP BPDUs affect safe root election and redundant-port states. For the Harborwick managed-network provider, the direct corrective action is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

Question 751

At the Harborwick managed-network provider, a newly connected access switch causes topology changes and the team assumes no BPDUs are received. What evidence would justify considering this concern addressed?

  1. The corrected uplink shows expected bridge control traffic and stable root state
  2. Both members exchange compatible LACP parameters and become active
  3. A test HA transition preserves authorized inventory and required services
  4. The diagnostic output identifies the intended member and its control-plane state

Explanation

Correct Answer

A:

This tests the real business behavior: the corrected uplink shows expected bridge control traffic and stable root state. It specifically checks whether the risk that missing or unexpected STP BPDUs affect safe root election and redundant-port states has been reduced.

Incorrect Answers

B:

The offered observation is: Both members exchange compatible LACP parameters and become active. It would support the separate mechanism: A physical link can stay up while LACP partner agreement remains incomplete. In this case the decisive dependency is: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The original keyed verification is: The corrected uplink shows expected bridge control traffic and stable root state.

C:

A test HA transition preserves authorized inventory and required services. That result would test a control for this other failure: A newly active FortiGate must have a valid path to its managed FortiSwitch environment. The question instead requires evidence for: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The direct outcome to verify is: The corrected uplink shows expected bridge control traffic and stable root state.

D:

The offered observation is: The diagnostic output identifies the intended member and its control-plane state. It would support the separate mechanism: Controller-side diagnostic information can distinguish authorization management and link problems. In this case the decisive dependency is: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The original keyed verification is: The corrected uplink shows expected bridge control traffic and stable root state.

Question 752

At the Harborwick managed-network provider, a newly connected access switch causes topology changes and the team assumes no BPDUs are received. How should the organization sustain the improvement?

  1. Confirm address and VLAN bindings at the start of a capture
  2. Track PoE capacity alarms whenever new devices are powered
  3. Audit LLDP neighbor detection during security hardening
  4. Monitor BPDU guard and STP events after cabling changes

Explanation

Correct Answer

D:

The needed prevention is to monitor BPDU guard and STP events after cabling changes. It directly sustains the original change to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

Incorrect Answers

A:

The suggested preventive check is: Confirm address and VLAN bindings at the start of a capture. Its technical scope concerns: An overly narrow or outdated filter can hide valid traffic from the analyst. This question asks how to sustain control over: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The more targeted safeguard is: Monitor BPDU guard and STP events after cabling changes.

B:

Track PoE capacity alarms whenever new devices are powered. That safeguard would help prevent recurrence of: An exhausted PoE power budget can interrupt otherwise healthy network links. The risk being reviewed here is instead: Missing or unexpected STP BPDUs affect safe root election and redundant-port states. The matching ongoing control is: Monitor BPDU guard and STP events after cabling changes.

C:

That routine supports fortilink lldp reception disabled, but the relevant ongoing risk requires the team to monitor BPDU guard and STP events after cabling changes. For the Harborwick managed-network provider, the direct corrective action is to use a supported packet capture or bridge diagnostic to confirm BPDU exchange on the connected uplink.

Question 753

At the Uptonbridge branch IT department, an IPTV multicast stream floods one VLAN and staff cannot tell whether receivers are joining correctly. Which approach best resolves the described issue?

  1. Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault
  2. Use STP bridge and port state diagnostics before replacing the optic
  3. Inspect per-port and chassis PoE consumption and supply state on the FortiSwitch
  4. Capture IGMP membership reports and queries on the affected VLAN alongside snooping state

Explanation

Correct Answer

D:

Capture IGMP membership reports and queries on the affected VLAN alongside snooping state is the best response because missing group reports or querier traffic can prevent membership learning. A focused validation would establish that a subscriber emits a valid report and only authorized receiver ports forward the stream.

Incorrect Answers

A:

Validate the endpoint's current IP and correct the capture filter before diagnosing a link fault can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to capture IGMP membership reports and queries on the affected VLAN alongside snooping state. For the Uptonbridge branch IT department, the direct corrective action is to capture IGMP membership reports and queries on the affected VLAN alongside snooping state.

B:

The offered action is: Use STP bridge and port state diagnostics before replacing the optic. It is associated with this separate technical condition: A healthy port can be intentionally blocked by spanning tree to prevent a loop. The actual incident concerns a different dependency: Missing group reports or querier traffic can prevent membership learning. The corresponding change is: Capture IGMP membership reports and queries on the affected VLAN alongside snooping state.

C:

This alternative would be suitable where an exhausted PoE power budget can interrupt otherwise healthy network links. It does not by itself resolve the need to capture IGMP membership reports and queries on the affected VLAN alongside snooping state. For the Uptonbridge branch IT department, the direct corrective action is to capture IGMP membership reports and queries on the affected VLAN alongside snooping state.

Question 754

At the Uptonbridge branch IT department, an IPTV multicast stream floods one VLAN and staff cannot tell whether receivers are joining correctly. Which explanation best accounts for the concern?

  1. Access-port observations may not include tags that are present on inter-switch trunks
  2. Missing group reports or querier traffic can prevent membership learning
  3. Controller-side diagnostic information can distinguish authorization management and link problems
  4. Routed FortiLink management does not transport a continuous VLAN data path between the sites

Explanation

Correct Answer

B:

The problem stems from the fact that missing group reports or querier traffic can prevent membership learning. A correct solution would capture IGMP membership reports and queries on the affected VLAN alongside snooping state and check that a subscriber emits a valid report and only authorized receiver ports forward the stream.

Incorrect Answers

A:

The offered principle is: Access-port observations may not include tags that are present on inter-switch trunks. In the source material it is associated with: Access-port observations may not include tags that are present on inter-switch trunks. This case has a different controlling cause: Missing group reports or querier traffic can prevent membership learning. Its keyed mechanism is: Missing group reports or querier traffic can prevent membership learning.

C:

The offered principle is: Controller-side diagnostic information can distinguish authorization management and link problems. In the source material it is associated with: Controller-side diagnostic information can distinguish authorization management and link problems. This case has a different controlling cause: Missing group reports or querier traffic can prevent membership learning. Its keyed mechanism is: Missing group reports or querier traffic can prevent membership learning.

D:

Routed FortiLink management does not transport a continuous VLAN data path between the sites. That may occur elsewhere, but the evidence at the Uptonbridge branch IT department instead points to the fact that missing group reports or querier traffic can prevent membership learning.

Question 755

At the Uptonbridge branch IT department, an IPTV multicast stream floods one VLAN and staff cannot tell whether receivers are joining correctly. Which test result best shows the requirement is met?

  1. The same test connection becomes visible with corrected filter parameters
  2. The new serial appears with intended port configuration and the retired one is inactive
  3. A subscriber emits a valid report and only authorized receiver ports forward the stream
  4. All downstream serial numbers reappear when the ISL is restored

Explanation

Correct Answer

C:

Because missing group reports or querier traffic can prevent membership learning, the required evidence must show that a subscriber emits a valid report and only authorized receiver ports forward the stream. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

The same test connection becomes visible with corrected filter parameters. That result would test a control for this other failure: An overly narrow or outdated filter can hide valid traffic from the analyst. The question instead requires evidence for: Missing group reports or querier traffic can prevent membership learning. The direct outcome to verify is: A subscriber emits a valid report and only authorized receiver ports forward the stream.

B:

The offered observation is: The new serial appears with intended port configuration and the retired one is inactive. It would support the separate mechanism: Management associations are tied to switch serial identity and cannot be assumed transferable. In this case the decisive dependency is: Missing group reports or querier traffic can prevent membership learning. The original keyed verification is: A subscriber emits a valid report and only authorized receiver ports forward the stream.

D:

At the Uptonbridge branch IT department, a result about fortilink downstream isl failure would not show that the team corrected the failure where missing group reports or querier traffic can prevent membership learning.

Question 756

At the Uptonbridge branch IT department, an IPTV multicast stream floods one VLAN and staff cannot tell whether receivers are joining correctly. Which ongoing control best prevents this issue from recurring?

  1. Record capture location when interpreting tagging evidence
  2. Keep multicast capture filters for video service investigations
  3. Keep a version-specific diagnostic command reference
  4. Alert on MCLAG peer and ICL alarms

Explanation

Correct Answer

B:

The needed prevention is to keep multicast capture filters for video service investigations. It directly sustains the original change to capture IGMP membership reports and queries on the affected VLAN alongside snooping state.

Incorrect Answers

A:

That routine supports vlan tag capture position, but the relevant ongoing risk requires the team to keep multicast capture filters for video service investigations. For the Uptonbridge branch IT department, the direct corrective action is to capture IGMP membership reports and queries on the affected VLAN alongside snooping state.

C:

Keep a version-specific diagnostic command reference is not the primary recurring safeguard for this problem. The team should keep multicast capture filters for video service investigations. For the Uptonbridge branch IT department, the direct corrective action is to capture IGMP membership reports and queries on the affected VLAN alongside snooping state.

D:

Alert on MCLAG peer and ICL alarms. That safeguard would help prevent recurrence of: Broken MCLAG peer communication can defeat coordinated multi-chassis forwarding. The risk being reviewed here is instead: Missing group reports or querier traffic can prevent membership learning. The matching ongoing control is: Keep multicast capture filters for video service investigations.

Question 757

At the Lakehaven data network services firm, users blame FortiSwitch QoS for a slow application but no one has confirmed packet loss or retransmission. Which implementation choice best addresses the situation?

  1. Capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters
  2. Apply narrow capture filters and reasonable sampling windows to the target traffic
  3. Correlate appropriate switch packet captures interface counters and FortiGate logs along the actual path
  4. Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies

Explanation

Correct Answer

A:

This solution addresses the stated limitation: application slowness cannot be attributed to switching congestion without traffic-level evidence. Implementing it means the team should capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters, then verify that the trace and counters isolate the actual loss point or disprove a switch fault.

Incorrect Answers

B:

Apply narrow capture filters and reasonable sampling windows to the target traffic addresses a different kind of problem: broad captures can exhaust limited capture memory and omit useful packets. Here the reported weakness is that application slowness cannot be attributed to switching congestion without traffic-level evidence. For the Lakehaven data network services firm, the direct corrective action is to capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters.

C:

The option addresses the separate situation where no single data source proves whether frames were dropped locally or later by routing or firewall policy. For this case, the more appropriate response is to capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters. For the Lakehaven data network services firm, the direct corrective action is to capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters.

D:

The offered alternative is: Use the supported FortiSwitch cable test and physical interface counters before altering VLAN policies. It addresses this separate failure mode: Copper faults can affect negotiation independently of Layer 2 configuration. In the current case, the observed mechanism is: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The keyed action, Capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters., targets that condition more directly.

Question 758

At the Lakehaven data network services firm, users blame FortiSwitch QoS for a slow application but no one has confirmed packet loss or retransmission. What risk should the team identify as the primary issue?

  1. The DHCP failure could occur before relay or after server response and needs packet-level isolation
  2. Application slowness cannot be attributed to switching congestion without traffic-level evidence
  3. A filter with no matching hits may be incorrectly ordered attached or classified
  4. FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller

Explanation

Correct Answer

B:

This identifies the root issue: application slowness cannot be attributed to switching congestion without traffic-level evidence. At the Lakehaven data network services firm, the team should therefore capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters.

Incorrect Answers

A:

The offered action is: The DHCP failure could occur before relay or after server response and needs packet-level isolation. It is associated with this separate technical condition: The DHCP failure could occur before relay or after server response and needs packet-level isolation. The actual incident concerns a different dependency: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The corresponding change is: Application slowness cannot be attributed to switching congestion without traffic-level evidence.

C:

The offered alternative is: A filter with no matching hits may be incorrectly ordered attached or classified. It addresses this separate failure mode: A filter with no matching hits may be incorrectly ordered attached or classified. In the current case, the observed mechanism is: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The keyed action, Application slowness cannot be attributed to switching congestion without traffic-level evidence., targets that condition more directly.

D:

FortiLink over Layer 3 does not support NAT between the FortiSwitch and controller. That is not the mechanism that accounts for the stated failure at the Lakehaven data network services firm.

Question 759

At the Lakehaven data network services firm, users blame FortiSwitch QoS for a slow application but no one has confirmed packet loss or retransmission. What is the strongest acceptance test for this change?

  1. The trace and counters isolate the actual loss point or disprove a switch fault
  2. The trace shows the last successful DHCP message and the boundary where response disappears
  3. The expected blocked and forwarding STP states match the approved topology
  4. The diagnostic output identifies the intended member and its control-plane state

Explanation

Correct Answer

A:

Because application slowness cannot be attributed to switching congestion without traffic-level evidence, the required evidence must show that the trace and counters isolate the actual loss point or disprove a switch fault. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Lakehaven data network services firm, a result about dhcp discovery packet capture would not show that the team corrected the failure where application slowness cannot be attributed to switching congestion without traffic-level evidence.

C:

The expected blocked and forwarding STP states match the approved topology. That result would test a control for this other failure: A healthy port can be intentionally blocked by spanning tree to prevent a loop. The question instead requires evidence for: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The direct outcome to verify is: The trace and counters isolate the actual loss point or disprove a switch fault.

D:

The offered observation is: The diagnostic output identifies the intended member and its control-plane state. It would support the separate mechanism: Controller-side diagnostic information can distinguish authorization management and link problems. In this case the decisive dependency is: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The original keyed verification is: The trace and counters isolate the actual loss point or disprove a switch fault.

Question 760

At the Lakehaven data network services firm, users blame FortiSwitch QoS for a slow application but no one has confirmed packet loss or retransmission. Which setting or practice should be reviewed in future?

  1. Confirm address and VLAN bindings at the start of a capture
  2. Monitor switch system resource trends during peak hours
  3. Collect baseline retransmission measurements for critical applications
  4. Record MAC movement information during desk-move incidents

Explanation

Correct Answer

C:

The team should collect baseline retransmission measurements for critical applications. That recurring practice targets the same weakness, namely that application slowness cannot be attributed to switching congestion without traffic-level evidence.

Incorrect Answers

A:

Confirm address and VLAN bindings at the start of a capture is not the primary recurring safeguard for this problem. The team should collect baseline retransmission measurements for critical applications. For the Lakehaven data network services firm, the direct corrective action is to capture the appropriate TCP flow and correlate retransmissions with interface error and queue counters.

B:

Monitor switch system resource trends during peak hours. That safeguard would help prevent recurrence of: Control-plane resource contention can cause slow management and protocol updates without saturated data links. The risk being reviewed here is instead: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The matching ongoing control is: Collect baseline retransmission measurements for critical applications.

D:

Record MAC movement information during desk-move incidents. That safeguard would help prevent recurrence of: Layer 2 forwarding learns MAC locations dynamically rather than from static room labels alone. The risk being reviewed here is instead: Application slowness cannot be attributed to switching congestion without traffic-level evidence. The matching ongoing control is: Collect baseline retransmission measurements for critical applications.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests