McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 16

Question 150

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing OSPF area design and link-state convergence during a controlled failover exercise (HCIP-H12-821-OSPF-038). The observed network issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. Which observation most directly verifies that the corrective change succeeded?

  1. Competing ASBR paths select according to the defined external metric type and tie-breaking cost.
  2. Router IDs are unique across the domain and database exchange proceeds to Full.
  3. The DROther pair remains 2-Way while each establishes proper Full adjacency with DR or BDR.
  4. The backbone receives the intended external aggregate and required exceptions.

Explanation

Correct Answer

B:

The best verification observation is: Router IDs are unique across the domain and database exchange proceeds to Full. It demonstrates the corrective action: Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency. This fits the principle: OSPF routers require unique identifiers for reliable link-state database exchange. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Competing ASBR paths select according to the defined external metric type and tie-breaking cost” responds to another technical or business failure: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. That source case depends on: The best verification observation is: Competing ASBR paths select according to the defined external metric type and tie-breaking cost. The present issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more direct action is “Router IDs are unique across the domain and database exchange proceeds to Full” because the best verification observation is: Router IDs are unique across the domain and database exchange proceeds to Full.

C:

“The DROther pair remains 2-Way while each establishes proper Full adjacency with DR or BDR” responds to another technical or business failure: Two OSPF routers on a broadcast VLAN stay at 2-Way and an engineer wrongly treats every such neighbor as failed. That source case depends on: The best verification observation is: The DROther pair remains 2-Way while each establishes proper Full adjacency with DR or BDR. The present issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more direct action is “Router IDs are unique across the domain and database exchange proceeds to Full” because the best verification observation is: Router IDs are unique across the domain and database exchange proceeds to Full.

D:

“The backbone receives the intended external aggregate and required exceptions” responds to another technical or business failure: An ASBR advertising multiple external subnets floods excessive details because external route aggregation was never applied. That source case depends on: The best verification observation is: The backbone receives the intended external aggregate and required exceptions. The present issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more direct action is “Router IDs are unique across the domain and database exchange proceeds to Full” because the best verification observation is: Router IDs are unique across the domain and database exchange proceeds to Full.

Question 151

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing OSPF area design and link-state convergence during a controlled failover exercise (HCIP-H12-821-OSPF-038). The observed network issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. Which next engineering action best addresses the reported problem?

  1. Check whether the devices are both DROthers and validate adjacency with the elected DR or BDR.
  2. Apply compatible authentication settings and keys on both interfaces under controlled change.
  3. Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs.
  4. Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency.

Explanation

Correct Answer

D:

The directly responsive action is: Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency. The specific reported fault is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. Confirmation should show: Router IDs are unique across the domain and database exchange proceeds to Full. The supporting technical principle is: OSPF routers require unique identifiers for reliable link-state database exchange.

Incorrect Answers

A:

“Check whether the devices are both DROthers and validate adjacency with the elected DR or BDR” responds to another technical or business failure: Two OSPF routers on a broadcast VLAN stay at 2-Way and an engineer wrongly treats every such neighbor as failed. That source case depends on: Broadcast OSPF does not require every pair of DROthers to form a full adjacency. The present issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more direct action is “Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency” because OSPF routers require unique identifiers for reliable link-state database exchange.

B:

“Apply compatible authentication settings and keys on both interfaces under controlled change” responds to another technical or business failure: An OSPF adjacency repeatedly fails due to mismatched authentication algorithms after a maintenance window. That source case depends on: OSPF routing exchanges depend on matched authentication parameters when authentication is enabled. The present issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more direct action is “Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency” because OSPF routers require unique identifiers for reliable link-state database exchange.

C:

“Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs” responds to another technical or business failure: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. That source case depends on: OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss. The present issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more direct action is “Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency” because OSPF routers require unique identifiers for reliable link-state database exchange.

Question 152

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing OSPF area design and link-state convergence during a controlled failover exercise (HCIP-H12-821-OSPF-038). The observed network issue is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. Which ongoing preventive or detective control would best reduce recurrence?

  1. State E1 or E2 design intent in redistribution policies and validate dual exits.
  2. Enforce backbone-connected area designs in OSPF topology reviews.
  3. Include priority and election expectations in campus VLAN rollout plans.
  4. Check duplicate router IDs in configuration reviews and fault diagnostics.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Check duplicate router IDs in configuration reviews and fault diagnostics. This directly addresses the recurring fault: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The corrective action would be: Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency. Success is demonstrated when: Router IDs are unique across the domain and database exchange proceeds to Full.

Incorrect Answers

A:

“State E1 or E2 design intent in redistribution policies and validate dual exits” addresses recurrence of another problem: An engineer mistakes an OSPF external Type 2 metric for a path whose internal costs are always added to its advertised value. That problem depends on: The preventive or detective safeguard is: State E1 or E2 design intent in redistribution policies and validate dual exits. The recurring risk here is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more targeted safeguard is “Check duplicate router IDs in configuration reviews and fault diagnostics” because the preventive or detective safeguard is: Check duplicate router IDs in configuration reviews and fault diagnostics.

B:

“Enforce backbone-connected area designs in OSPF topology reviews” addresses recurrence of another problem: A branch area has no direct backbone connectivity and operators try to exchange routes between nonbackbone areas directly. That problem depends on: The preventive or detective safeguard is: Enforce backbone-connected area designs in OSPF topology reviews. The recurring risk here is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more targeted safeguard is “Check duplicate router IDs in configuration reviews and fault diagnostics” because the preventive or detective safeguard is: Check duplicate router IDs in configuration reviews and fault diagnostics.

C:

“Include priority and election expectations in campus VLAN rollout plans” addresses recurrence of another problem: A new router with OSPF priority zero fails to become the designated router even after repeated interface bounces. That problem depends on: The preventive or detective safeguard is: Include priority and election expectations in campus VLAN rollout plans. The recurring risk here is: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. The more targeted safeguard is “Check duplicate router IDs in configuration reviews and fault diagnostics” because the preventive or detective safeguard is: Check duplicate router IDs in configuration reviews and fault diagnostics.

Question 153

At fictional Fairport Manufacturing, a network engineer supporting factory OT access is reviewing route-policy and traffic-control behavior during a post-maintenance incident review (HCIP-H12-821-POLICY-039). The observed network issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. Which routing, switching, or network principle best explains the appropriate solution?

  1. Bidirectional route redistribution requires loop prevention and consistent route ownership.
  2. Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.
  3. QoS behavior begins with accurate classification of relevant traffic fields.
  4. Stateless packet filters do not intrinsically track an entire transport session.

Explanation

Correct Answer

A:

The governing principle is: Bidirectional route redistribution requires loop prevention and consistent route ownership. In this scenario, the appropriate action is: Mark redistributed routes and block re-import at reciprocal protocol boundaries. Valid evidence would show: Route tables contain stable intended origin paths without alternating loops.

Incorrect Answers

B:

“Source-sensitive forwarding policy cannot be verified using only destination-based generic probes” responds to another technical or business failure: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. That source case depends on: Source-sensitive forwarding policy cannot be verified using only destination-based generic probes. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Bidirectional route redistribution requires loop prevention and consistent route ownership” because Bidirectional route redistribution requires loop prevention and consistent route ownership.

C:

“QoS behavior begins with accurate classification of relevant traffic fields” responds to another technical or business failure: A classifier matches the wrong VLAN priority bits and high-priority voice is treated as bulk data. That source case depends on: QoS behavior begins with accurate classification of relevant traffic fields. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Bidirectional route redistribution requires loop prevention and consistent route ownership” because Bidirectional route redistribution requires loop prevention and consistent route ownership.

D:

“Stateless packet filters do not intrinsically track an entire transport session” responds to another technical or business failure: An ACL only denies one direction of a TCP conversation and the security team assumes return packets are automatically blocked. That source case depends on: Stateless packet filters do not intrinsically track an entire transport session. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Bidirectional route redistribution requires loop prevention and consistent route ownership” because Bidirectional route redistribution requires loop prevention and consistent route ownership.

Question 154

At fictional Fairport Manufacturing, a network engineer supporting factory OT access is reviewing route-policy and traffic-control behavior during a post-maintenance incident review (HCIP-H12-821-POLICY-039). The observed network issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. Which next engineering action best addresses the reported problem?

  1. Mark redistributed routes and block re-import at reciprocal protocol boundaries.
  2. Distinguish policing drop or remark actions from shaping that buffers traffic over time.
  3. Audit trust boundaries and re-marking configuration across the complete forwarding path.
  4. Narrow route-policy scope to the intended neighbor, protocol and prefix sets.

Explanation

Correct Answer

A:

The directly responsive action is: Mark redistributed routes and block re-import at reciprocal protocol boundaries. The specific reported fault is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. Confirmation should show: Route tables contain stable intended origin paths without alternating loops. The supporting technical principle is: Bidirectional route redistribution requires loop prevention and consistent route ownership.

Incorrect Answers

B:

“Distinguish policing drop or remark actions from shaping that buffers traffic over time” responds to another technical or business failure: A Huawei MQC behavior applies policing at an uplink but the operator expects it to buffer all excess traffic. That source case depends on: Traffic policing and traffic shaping handle excess rates differently. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Mark redistributed routes and block re-import at reciprocal protocol boundaries” because Bidirectional route redistribution requires loop prevention and consistent route ownership.

C:

“Audit trust boundaries and re-marking configuration across the complete forwarding path” responds to another technical or business failure: A QoS policy marks packets DSCP but a downstream switch strips or overwrites those markings. That source case depends on: End-to-end QoS depends on consistent marking trust and scheduling policy. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Mark redistributed routes and block re-import at reciprocal protocol boundaries” because Bidirectional route redistribution requires loop prevention and consistent route ownership.

D:

“Narrow route-policy scope to the intended neighbor, protocol and prefix sets” responds to another technical or business failure: An import routing policy changes route preference globally when only one partner's redistributed routes should be affected. That source case depends on: Policy association points control which imported routing information is modified. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Mark redistributed routes and block re-import at reciprocal protocol boundaries” because Bidirectional route redistribution requires loop prevention and consistent route ownership.

Question 155

At fictional Fairport Manufacturing, a network engineer supporting factory OT access is reviewing route-policy and traffic-control behavior during a post-maintenance incident review (HCIP-H12-821-POLICY-039). The observed network issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. Which ongoing preventive or detective control would best reduce recurrence?

  1. Review external route inventory after every redistribution expansion.
  2. Load-test all QoS queues and starvation behavior before enabling strict priority.
  3. Audit redistributed origin tags and filter sequences at each protocol boundary.
  4. Validate ACL references and classifier hit counters during service rollout.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Audit redistributed origin tags and filter sequences at each protocol boundary. This directly addresses the recurring fault: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The corrective action would be: Mark redistributed routes and block re-import at reciprocal protocol boundaries. Success is demonstrated when: Route tables contain stable intended origin paths without alternating loops.

Incorrect Answers

A:

“Review external route inventory after every redistribution expansion” addresses recurrence of another problem: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. That problem depends on: The preventive or detective safeguard is: Review external route inventory after every redistribution expansion. The recurring risk here is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more targeted safeguard is “Audit redistributed origin tags and filter sequences at each protocol boundary” because the preventive or detective safeguard is: Audit redistributed origin tags and filter sequences at each protocol boundary.

B:

“Load-test all QoS queues and starvation behavior before enabling strict priority” addresses recurrence of another problem: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That problem depends on: The preventive or detective safeguard is: Load-test all QoS queues and starvation behavior before enabling strict priority. The recurring risk here is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more targeted safeguard is “Audit redistributed origin tags and filter sequences at each protocol boundary” because the preventive or detective safeguard is: Audit redistributed origin tags and filter sequences at each protocol boundary.

D:

“Validate ACL references and classifier hit counters during service rollout” addresses recurrence of another problem: A routing policy references a nonexistent ACL and traffic is still sent down the default path. That problem depends on: The preventive or detective safeguard is: Validate ACL references and classifier hit counters during service rollout. The recurring risk here is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more targeted safeguard is “Audit redistributed origin tags and filter sequences at each protocol boundary” because the preventive or detective safeguard is: Audit redistributed origin tags and filter sequences at each protocol boundary.

Question 156

At fictional Fairport Manufacturing, a network engineer supporting factory OT access is reviewing route-policy and traffic-control behavior during a post-maintenance incident review (HCIP-H12-821-POLICY-039). The observed network issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. Which observation most directly verifies that the corrective change succeeded?

  1. Route tables contain stable intended origin paths without alternating loops.
  2. The intended service flow changes next hop while other routes retain established egress.
  3. The approved prefix follows the intended single policy decision and unauthorized routes are rejected.
  4. Every planned source group uses its assigned path with no unintended routing side effects.

Explanation

Correct Answer

A:

The best verification observation is: Route tables contain stable intended origin paths without alternating loops. It demonstrates the corrective action: Mark redistributed routes and block re-import at reciprocal protocol boundaries. This fits the principle: Bidirectional route redistribution requires loop prevention and consistent route ownership. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“The intended service flow changes next hop while other routes retain established egress” responds to another technical or business failure: A dual-provider network expects a routing preference change to affect only one VLAN yet every route in the VRF changes. That source case depends on: The best verification observation is: The intended service flow changes next hop while other routes retain established egress. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Route tables contain stable intended origin paths without alternating loops” because the best verification observation is: Route tables contain stable intended origin paths without alternating loops.

C:

“The approved prefix follows the intended single policy decision and unauthorized routes are rejected” responds to another technical or business failure: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That source case depends on: The best verification observation is: The approved prefix follows the intended single policy decision and unauthorized routes are rejected. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Route tables contain stable intended origin paths without alternating loops” because the best verification observation is: Route tables contain stable intended origin paths without alternating loops.

D:

“Every planned source group uses its assigned path with no unintended routing side effects” responds to another technical or business failure: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. That source case depends on: The best verification observation is: Every planned source group uses its assigned path with no unintended routing side effects. The present issue is: An engineer imports routes from a backup routing process without a loop-prevention tag and the same prefixes circulate between protocols. The more direct action is “Route tables contain stable intended origin paths without alternating loops” because the best verification observation is: Route tables contain stable intended origin paths without alternating loops.

Question 157

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing Huawei network security and VPN isolation during a planned network scaling change (HCIP-H12-821-SECURITY-040). The observed network issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. Which observation most directly verifies that the corrective change succeeded?

  1. The intended LAN traffic creates a child security association and passes through the tunnel.
  2. Privileged sessions use encrypted transport from approved management hosts only.
  3. The server is reachable only through intended DMZ policy paths and not unrestricted internal flows.
  4. Identical customer addresses remain isolated in separate VRF route and forwarding tables.

Explanation

Correct Answer

D:

The best verification observation is: Identical customer addresses remain isolated in separate VRF route and forwarding tables. It demonstrates the corrective action: Place separated customer routes in appropriately distinct VPN routing and forwarding instances. This fits the principle: VRFs create distinct routing and forwarding contexts for separate tenants. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The intended LAN traffic creates a child security association and passes through the tunnel” responds to another technical or business failure: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. That source case depends on: The best verification observation is: The intended LAN traffic creates a child security association and passes through the tunnel. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “Identical customer addresses remain isolated in separate VRF route and forwarding tables” because the best verification observation is: Identical customer addresses remain isolated in separate VRF route and forwarding tables.

B:

“Privileged sessions use encrypted transport from approved management hosts only” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: The best verification observation is: Privileged sessions use encrypted transport from approved management hosts only. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “Identical customer addresses remain isolated in separate VRF route and forwarding tables” because the best verification observation is: Identical customer addresses remain isolated in separate VRF route and forwarding tables.

C:

“The server is reachable only through intended DMZ policy paths and not unrestricted internal flows” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: The best verification observation is: The server is reachable only through intended DMZ policy paths and not unrestricted internal flows. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “Identical customer addresses remain isolated in separate VRF route and forwarding tables” because the best verification observation is: Identical customer addresses remain isolated in separate VRF route and forwarding tables.

Question 158

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing Huawei network security and VPN isolation during a planned network scaling change (HCIP-H12-821-SECURITY-040). The observed network issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. Which ongoing preventive or detective control would best reduce recurrence?

  1. Audit management source restrictions and session logs regularly.
  2. Audit customer interface-to-VRF and route-leak configuration at onboarding.
  3. Validate policy order and hit counts with representative traffic.
  4. Test relevant TCP and UDP service behavior when deploying transport filters.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Audit customer interface-to-VRF and route-leak configuration at onboarding. This directly addresses the recurring fault: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The corrective action would be: Place separated customer routes in appropriately distinct VPN routing and forwarding instances. Success is demonstrated when: Identical customer addresses remain isolated in separate VRF route and forwarding tables.

Incorrect Answers

A:

“Audit management source restrictions and session logs regularly” addresses recurrence of another problem: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. That problem depends on: The preventive or detective safeguard is: Audit management source restrictions and session logs regularly. The recurring risk here is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more targeted safeguard is “Audit customer interface-to-VRF and route-leak configuration at onboarding” because the preventive or detective safeguard is: Audit customer interface-to-VRF and route-leak configuration at onboarding.

C:

“Validate policy order and hit counts with representative traffic” addresses recurrence of another problem: A firewall logs allowed connections but its security team cannot tie sessions to intended service policies. That problem depends on: The preventive or detective safeguard is: Validate policy order and hit counts with representative traffic. The recurring risk here is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more targeted safeguard is “Audit customer interface-to-VRF and route-leak configuration at onboarding” because the preventive or detective safeguard is: Audit customer interface-to-VRF and route-leak configuration at onboarding.

D:

“Test relevant TCP and UDP service behavior when deploying transport filters” addresses recurrence of another problem: An edge ACL denies DNS over UDP while applications switch to TCP DNS and an operator considers the hostname filtering complete. That problem depends on: The preventive or detective safeguard is: Test relevant TCP and UDP service behavior when deploying transport filters. The recurring risk here is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more targeted safeguard is “Audit customer interface-to-VRF and route-leak configuration at onboarding” because the preventive or detective safeguard is: Audit customer interface-to-VRF and route-leak configuration at onboarding.

Question 159

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing Huawei network security and VPN isolation during a planned network scaling change (HCIP-H12-821-SECURITY-040). The observed network issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. Which next engineering action best addresses the reported problem?

  1. Correct the approved split-tunnel route and access-policy configuration on the VPN service.
  2. Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior.
  3. Place separated customer routes in appropriately distinct VPN routing and forwarding instances.
  4. Validate DNAT or source-NAT mapping and applicable security-policy direction using the translated packet path.

Explanation

Correct Answer

C:

The directly responsive action is: Place separated customer routes in appropriately distinct VPN routing and forwarding instances. The specific reported fault is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. Confirmation should show: Identical customer addresses remain isolated in separate VRF route and forwarding tables. The supporting technical principle is: VRFs create distinct routing and forwarding contexts for separate tenants.

Incorrect Answers

A:

“Correct the approved split-tunnel route and access-policy configuration on the VPN service” responds to another technical or business failure: A remote-access VPN sends sensitive traffic outside the encrypted tunnel because split-tunnel destinations were omitted. That source case depends on: VPN tunnel establishment does not by itself guarantee each application uses the intended route. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “Place separated customer routes in appropriately distinct VPN routing and forwarding instances” because VRFs create distinct routing and forwarding contexts for separate tenants.

B:

“Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior” responds to another technical or business failure: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. That source case depends on: Stateful firewall enforcement relies on session context distinct from simple packet ACL filtering. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “Place separated customer routes in appropriately distinct VPN routing and forwarding instances” because VRFs create distinct routing and forwarding contexts for separate tenants.

D:

“Validate DNAT or source-NAT mapping and applicable security-policy direction using the translated packet path” responds to another technical or business failure: A firewall administrator changes address translation without updating security policies and external users lose access to a public service. That source case depends on: Network address translation and access policy cooperate but perform distinct functions. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “Place separated customer routes in appropriately distinct VPN routing and forwarding instances” because VRFs create distinct routing and forwarding contexts for separate tenants.

Question 160

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing Huawei network security and VPN isolation during a planned network scaling change (HCIP-H12-821-SECURITY-040). The observed network issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. Which routing, switching, or network principle best explains the appropriate solution?

  1. A session can match a higher-priority policy before reaching a later intended rule.
  2. VRFs create distinct routing and forwarding contexts for separate tenants.
  3. Cleartext administrative protocols can expose credentials and control activity.
  4. VPN tunnel establishment does not by itself guarantee each application uses the intended route.

Explanation

Correct Answer

B:

The governing principle is: VRFs create distinct routing and forwarding contexts for separate tenants. In this scenario, the appropriate action is: Place separated customer routes in appropriately distinct VPN routing and forwarding instances. Valid evidence would show: Identical customer addresses remain isolated in separate VRF route and forwarding tables.

Incorrect Answers

A:

“A session can match a higher-priority policy before reaching a later intended rule” responds to another technical or business failure: A firewall logs allowed connections but its security team cannot tie sessions to intended service policies. That source case depends on: A session can match a higher-priority policy before reaching a later intended rule. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “VRFs create distinct routing and forwarding contexts for separate tenants” because VRFs create distinct routing and forwarding contexts for separate tenants.

C:

“Cleartext administrative protocols can expose credentials and control activity” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: Cleartext administrative protocols can expose credentials and control activity. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “VRFs create distinct routing and forwarding contexts for separate tenants” because VRFs create distinct routing and forwarding contexts for separate tenants.

D:

“VPN tunnel establishment does not by itself guarantee each application uses the intended route” responds to another technical or business failure: A remote-access VPN sends sensitive traffic outside the encrypted tunnel because split-tunnel destinations were omitted. That source case depends on: VPN tunnel establishment does not by itself guarantee each application uses the intended route. The present issue is: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. The more direct action is “VRFs create distinct routing and forwarding contexts for separate tenants” because VRFs create distinct routing and forwarding contexts for separate tenants.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests