McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 14

Question 130

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing route-policy and traffic-control behavior during a lab-to-production acceptance (HCIP-H12-821-POLICY-033). The observed network issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate policer and shaper action selection against traffic SLAs.
  2. Compare advertised communities and final export decisions after policy updates.
  3. Check trust boundary and classification counters before measuring QoS outcome.
  4. Build source-destination acceptance matrices for policy-based routing.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Build source-destination acceptance matrices for policy-based routing. This directly addresses the recurring fault: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The corrective action would be: Generate probes from each intended source address or VLAN and observe policy match statistics. Success is demonstrated when: Every planned source group uses its assigned path with no unintended routing side effects.

Incorrect Answers

A:

“Validate policer and shaper action selection against traffic SLAs” addresses recurrence of another problem: A Huawei MQC behavior applies policing at an uplink but the operator expects it to buffer all excess traffic. That problem depends on: The preventive or detective safeguard is: Validate policer and shaper action selection against traffic SLAs. The recurring risk here is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more targeted safeguard is “Build source-destination acceptance matrices for policy-based routing” because the preventive or detective safeguard is: Build source-destination acceptance matrices for policy-based routing.

B:

“Compare advertised communities and final export decisions after policy updates” addresses recurrence of another problem: An engineer sets a BGP route community but forgets the matching export policy and upstream advertisements are unchanged. That problem depends on: The preventive or detective safeguard is: Compare advertised communities and final export decisions after policy updates. The recurring risk here is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more targeted safeguard is “Build source-destination acceptance matrices for policy-based routing” because the preventive or detective safeguard is: Build source-destination acceptance matrices for policy-based routing.

C:

“Check trust boundary and classification counters before measuring QoS outcome” addresses recurrence of another problem: A classifier matches the wrong VLAN priority bits and high-priority voice is treated as bulk data. That problem depends on: The preventive or detective safeguard is: Check trust boundary and classification counters before measuring QoS outcome. The recurring risk here is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more targeted safeguard is “Build source-destination acceptance matrices for policy-based routing” because the preventive or detective safeguard is: Build source-destination acceptance matrices for policy-based routing.

Question 131

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing route-policy and traffic-control behavior during a lab-to-production acceptance (HCIP-H12-821-POLICY-033). The observed network issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. Which routing, switching, or network principle best explains the appropriate solution?

  1. Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.
  2. Traffic policing and traffic shaping handle excess rates differently.
  3. Route redistribution crosses protocol boundaries and needs controlled prefix filtering.
  4. Token bucket policers classify traffic using configured rate and burst parameters.

Explanation

Correct Answer

A:

The governing principle is: Source-sensitive forwarding policy cannot be verified using only destination-based generic probes. In this scenario, the appropriate action is: Generate probes from each intended source address or VLAN and observe policy match statistics. Valid evidence would show: Every planned source group uses its assigned path with no unintended routing side effects.

Incorrect Answers

B:

“Traffic policing and traffic shaping handle excess rates differently” responds to another technical or business failure: A Huawei MQC behavior applies policing at an uplink but the operator expects it to buffer all excess traffic. That source case depends on: Traffic policing and traffic shaping handle excess rates differently. The present issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more direct action is “Source-sensitive forwarding policy cannot be verified using only destination-based generic probes” because Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

C:

“Route redistribution crosses protocol boundaries and needs controlled prefix filtering” responds to another technical or business failure: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. That source case depends on: Route redistribution crosses protocol boundaries and needs controlled prefix filtering. The present issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more direct action is “Source-sensitive forwarding policy cannot be verified using only destination-based generic probes” because Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

D:

“Token bucket policers classify traffic using configured rate and burst parameters” responds to another technical or business failure: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. That source case depends on: Token bucket policers classify traffic using configured rate and burst parameters. The present issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more direct action is “Source-sensitive forwarding policy cannot be verified using only destination-based generic probes” because Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

Question 132

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing route-policy and traffic-control behavior during a lab-to-production acceptance (HCIP-H12-821-POLICY-033). The observed network issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. Which next engineering action best addresses the reported problem?

  1. Verify community attachment, propagation and explicit community matching at the export policy.
  2. Generate probes from each intended source address or VLAN and observe policy match statistics.
  3. Correct the prefix-filter network and mask length parameters for intended component routes.
  4. Select targeted route matching rather than blanket changes to the routing protocol preference.

Explanation

Correct Answer

B:

The directly responsive action is: Generate probes from each intended source address or VLAN and observe policy match statistics. The specific reported fault is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. Confirmation should show: Every planned source group uses its assigned path with no unintended routing side effects. The supporting technical principle is: Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

Incorrect Answers

A:

“Verify community attachment, propagation and explicit community matching at the export policy” responds to another technical or business failure: An engineer sets a BGP route community but forgets the matching export policy and upstream advertisements are unchanged. That source case depends on: Community marking and route-policy enforcement are separate configured stages. The present issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more direct action is “Generate probes from each intended source address or VLAN and observe policy match statistics” because Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

C:

“Correct the prefix-filter network and mask length parameters for intended component routes” responds to another technical or business failure: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. That source case depends on: IP prefix filtering depends on both address prefix and permitted length ranges. The present issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more direct action is “Generate probes from each intended source address or VLAN and observe policy match statistics” because Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

D:

“Select targeted route matching rather than blanket changes to the routing protocol preference” responds to another technical or business failure: A dual-provider network expects a routing preference change to affect only one VLAN yet every route in the VRF changes. That source case depends on: Routing protocol preference is broad selection behavior unless narrowed by policy. The present issue is: A traffic-engineering plan changes route selection but the test validates only traceroute from the wrong source network. The more direct action is “Generate probes from each intended source address or VLAN and observe policy match statistics” because Source-sensitive forwarding policy cannot be verified using only destination-based generic probes.

Question 133

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing IGMP and PIM multicast distribution during a planned network scaling change (HCIP-H12-821-MULTICAST-034). The observed network issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. Which routing, switching, or network principle best explains the appropriate solution?

  1. IGMP leave handling and query responses govern expiry of membership state.
  2. A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.
  3. Shared-tree PIM-SM discovery depends on appropriate RP reachability.
  4. IGMP snooping constrains layer-2 multicast replication by observing group membership.

Explanation

Correct Answer

B:

The governing principle is: A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces. In this scenario, the appropriate action is: Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership. Valid evidence would show: The correct incoming interface and expected outgoing interface list are installed end to end.

Incorrect Answers

A:

“IGMP leave handling and query responses govern expiry of membership state” responds to another technical or business failure: An IGMPv2 receiver leaves a group but the switch continues forwarding the stream indefinitely. That source case depends on: IGMP leave handling and query responses govern expiry of membership state. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces” because a working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

C:

“Shared-tree PIM-SM discovery depends on appropriate RP reachability” responds to another technical or business failure: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. That source case depends on: Shared-tree PIM-SM discovery depends on appropriate RP reachability. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces” because a working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

D:

“IGMP snooping constrains layer-2 multicast replication by observing group membership” responds to another technical or business failure: A receiver sends IGMP membership reports but the local VLAN switch floods the multicast group to every port. That source case depends on: IGMP snooping constrains layer-2 multicast replication by observing group membership. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces” because a working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

Question 134

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing IGMP and PIM multicast distribution during a planned network scaling change (HCIP-H12-821-MULTICAST-034). The observed network issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. Which next engineering action best addresses the reported problem?

  1. Align IGMP version support and receiver source-filtering expectations.
  2. Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership.
  3. Reassess PIM mode and topology to use receiver-driven multicast delivery where suitable.
  4. Assign unique approved group ranges and check IGMP or PIM subscriptions.

Explanation

Correct Answer

B:

The directly responsive action is: Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership. The specific reported fault is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. Confirmation should show: The correct incoming interface and expected outgoing interface list are installed end to end. The supporting technical principle is: A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

Incorrect Answers

A:

“Align IGMP version support and receiver source-filtering expectations” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: IGMPv3 adds source filtering required for source-specific multicast operation. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership” because a working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

C:

“Reassess PIM mode and topology to use receiver-driven multicast delivery where suitable” responds to another technical or business failure: A PIM dense-mode network floods large multicast volumes to branches with no interested receivers. That source case depends on: PIM-DM initially floods and prunes while PIM-SM builds receiver-oriented trees. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership” because a working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

D:

“Assign unique approved group ranges and check IGMP or PIM subscriptions” responds to another technical or business failure: Multicast packets arrive at the wrong group because the sender application uses a group address overlapping another service. That source case depends on: Multicast group addressing must be managed as an intentional shared network namespace. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership” because a working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces.

Question 135

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing IGMP and PIM multicast distribution during a planned network scaling change (HCIP-H12-821-MULTICAST-034). The observed network issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. Which observation most directly verifies that the corrective change succeeded?

  1. Only the requested source-group stream is delivered without RP-based ambiguity.
  2. Multicast packets resume on the revised valid RPF interface after failover.
  3. The correct incoming interface and expected outgoing interface list are installed end to end.
  4. The receiver joins only the intended source-group stream under IGMPv3.

Explanation

Correct Answer

C:

The best verification observation is: The correct incoming interface and expected outgoing interface list are installed end to end. It demonstrates the corrective action: Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership. This fits the principle: A working multicast stream requires valid ingress RPF and interested downstream forwarding interfaces. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Only the requested source-group stream is delivered without RP-based ambiguity” responds to another technical or business failure: A source-specific multicast receiver attempts to use an any-source RP tree even though the deployment expects a specified source. That source case depends on: The best verification observation is: Only the requested source-group stream is delivered without RP-based ambiguity. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “The correct incoming interface and expected outgoing interface list are installed end to end” because the best verification observation is: The correct incoming interface and expected outgoing interface list are installed end to end.

B:

“Multicast packets resume on the revised valid RPF interface after failover” responds to another technical or business failure: A multicast core drops packets after a path failover because the unicast RPF route has not converged to the new incoming link. That source case depends on: The best verification observation is: Multicast packets resume on the revised valid RPF interface after failover. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “The correct incoming interface and expected outgoing interface list are installed end to end” because the best verification observation is: The correct incoming interface and expected outgoing interface list are installed end to end.

D:

“The receiver joins only the intended source-group stream under IGMPv3” responds to another technical or business failure: A network expects IGMPv3 source-specific filtering but uses routers configured only for IGMPv2. That source case depends on: The best verification observation is: The receiver joins only the intended source-group stream under IGMPv3. The present issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more direct action is “The correct incoming interface and expected outgoing interface list are installed end to end” because the best verification observation is: The correct incoming interface and expected outgoing interface list are installed end to end.

Question 136

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing IGMP and PIM multicast distribution during a planned network scaling change (HCIP-H12-821-MULTICAST-034). The observed network issue is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. Which ongoing preventive or detective control would best reduce recurrence?

  1. Maintain a group-address registry for application onboarding.
  2. Test group availability per VRF instead of global routing only.
  3. Verify RP mappings and unicast reachability in every multicast VRF.
  4. Maintain a multicast fault workflow covering source, RPF, tree and membership.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Maintain a multicast fault workflow covering source, RPF, tree and membership. This directly addresses the recurring fault: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The corrective action would be: Correlate source RPF, multicast forwarding entry and downstream IGMP or PIM membership. Success is demonstrated when: The correct incoming interface and expected outgoing interface list are installed end to end.

Incorrect Answers

A:

“Maintain a group-address registry for application onboarding” addresses recurrence of another problem: Multicast packets arrive at the wrong group because the sender application uses a group address overlapping another service. That problem depends on: The preventive or detective safeguard is: Maintain a group-address registry for application onboarding. The recurring risk here is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more targeted safeguard is “Maintain a multicast fault workflow covering source, RPF, tree and membership” because the preventive or detective safeguard is: Maintain a multicast fault workflow covering source, RPF, tree and membership.

B:

“Test group availability per VRF instead of global routing only” addresses recurrence of another problem: A multicast over WAN deployment works within a VLAN but fails at the site boundary because the routing instance differs. That problem depends on: The preventive or detective safeguard is: Test group availability per VRF instead of global routing only. The recurring risk here is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more targeted safeguard is “Maintain a multicast fault workflow covering source, RPF, tree and membership” because the preventive or detective safeguard is: Maintain a multicast fault workflow covering source, RPF, tree and membership.

C:

“Verify RP mappings and unicast reachability in every multicast VRF” addresses recurrence of another problem: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. That problem depends on: The preventive or detective safeguard is: Verify RP mappings and unicast reachability in every multicast VRF. The recurring risk here is: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. The more targeted safeguard is “Maintain a multicast fault workflow covering source, RPF, tree and membership” because the preventive or detective safeguard is: Maintain a multicast fault workflow covering source, RPF, tree and membership.

Question 137

At fictional Uplands Retail, a network engineer supporting customer edge routers is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-035). The observed network issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. Which ongoing preventive or detective control would best reduce recurrence?

  1. Compare local AS and peer AS values before bringing up BGP sessions.
  2. Verify BGP best-route and FIB installation separately after enabling multipath.
  3. Review match ordering with representative permitted and denied prefixes.
  4. Test each included component network before advertising a new aggregate.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Verify BGP best-route and FIB installation separately after enabling multipath. This directly addresses the recurring fault: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The corrective action would be: Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration. Success is demonstrated when: The RIB and FIB reflect only the authorized installed best or multipath routes.

Incorrect Answers

A:

“Compare local AS and peer AS values before bringing up BGP sessions” addresses recurrence of another problem: Two routers establish TCP connectivity but BGP stays in Active because the configured peer AS differs from the neighbor's actual AS. That problem depends on: The preventive or detective safeguard is: Compare local AS and peer AS values before bringing up BGP sessions. The recurring risk here is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more targeted safeguard is “Verify BGP best-route and FIB installation separately after enabling multipath” because the preventive or detective safeguard is: Verify BGP best-route and FIB installation separately after enabling multipath.

C:

“Review match ordering with representative permitted and denied prefixes” addresses recurrence of another problem: A route-policy applies an import deny clause before the intended permit and unexpectedly drops every received route. That problem depends on: The preventive or detective safeguard is: Review match ordering with representative permitted and denied prefixes. The recurring risk here is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more targeted safeguard is “Verify BGP best-route and FIB installation separately after enabling multipath” because the preventive or detective safeguard is: Verify BGP best-route and FIB installation separately after enabling multipath.

D:

“Test each included component network before advertising a new aggregate” addresses recurrence of another problem: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. That problem depends on: The preventive or detective safeguard is: Test each included component network before advertising a new aggregate. The recurring risk here is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more targeted safeguard is “Verify BGP best-route and FIB installation separately after enabling multipath” because the preventive or detective safeguard is: Verify BGP best-route and FIB installation separately after enabling multipath.

Question 138

At fictional Uplands Retail, a network engineer supporting customer edge routers is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-035). The observed network issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. Which next engineering action best addresses the reported problem?

  1. Choose the correct EVPN route type for IP prefix routing versus bridged endpoint MAC reachability.
  2. Establish reachability to the advertised next hop or apply supported next-hop-local policy where appropriate.
  3. Review MED comparison scope and any explicit policy for peers from different autonomous systems.
  4. Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration.

Explanation

Correct Answer

D:

The directly responsive action is: Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration. The specific reported fault is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. Confirmation should show: The RIB and FIB reflect only the authorized installed best or multipath routes. The supporting technical principle is: BGP can retain multiple paths while installing selected forwarding entries under platform rules.

Incorrect Answers

A:

“Choose the correct EVPN route type for IP prefix routing versus bridged endpoint MAC reachability” responds to another technical or business failure: An engineer expects BGP EVPN Type 5 IP prefixes to replace all MAC learning requirements for a layer-2 stretch. That source case depends on: EVPN route types distinguish IP-prefix advertisement from MAC/IP advertisement. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration” because BGP can retain multiple paths while installing selected forwarding entries under platform rules.

B:

“Establish reachability to the advertised next hop or apply supported next-hop-local policy where appropriate” responds to another technical or business failure: A received BGP prefix has a NEXT_HOP attribute unreachable inside the receiving autonomous system. That source case depends on: BGP route viability depends on recursive reachability of the next-hop attribute. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration” because BGP can retain multiple paths while installing selected forwarding entries under platform rules.

C:

“Review MED comparison scope and any explicit policy for peers from different autonomous systems” responds to another technical or business failure: A multi-exit BGP neighbor advertises a preferred MED but the local router compares routes from unrelated upstream ASes incorrectly. That source case depends on: MED can influence entry choice but default comparisons and import policy constrain its use. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration” because BGP can retain multiple paths while installing selected forwarding entries under platform rules.

Question 139

At fictional Uplands Retail, a network engineer supporting customer edge routers is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-035). The observed network issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. Which observation most directly verifies that the corrective change succeeded?

  1. Designated clients receive routes learned from other clients as permitted.
  2. The RIB and FIB reflect only the authorized installed best or multipath routes.
  3. External observed routes show the intended prepending while any remaining policy preference is explained.
  4. The upstream receives the intended aggregate and no unauthorized more-specific prefixes.

Explanation

Correct Answer

B:

The best verification observation is: The RIB and FIB reflect only the authorized installed best or multipath routes. It demonstrates the corrective action: Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration. This fits the principle: BGP can retain multiple paths while installing selected forwarding entries under platform rules. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Designated clients receive routes learned from other clients as permitted” responds to another technical or business failure: An enterprise has too many iBGP sessions and introduces a route reflector without identifying its client peers. That source case depends on: The best verification observation is: Designated clients receive routes learned from other clients as permitted. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “The RIB and FIB reflect only the authorized installed best or multipath routes” because the best verification observation is: The RIB and FIB reflect only the authorized installed best or multipath routes.

C:

“External observed routes show the intended prepending while any remaining policy preference is explained” responds to another technical or business failure: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. That source case depends on: The best verification observation is: External observed routes show the intended prepending while any remaining policy preference is explained. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “The RIB and FIB reflect only the authorized installed best or multipath routes” because the best verification observation is: The RIB and FIB reflect only the authorized installed best or multipath routes.

D:

“The upstream receives the intended aggregate and no unauthorized more-specific prefixes” responds to another technical or business failure: An administrator applies an export prefix list at the BGP border but mistakenly filters all networks including a critical aggregate. That source case depends on: The best verification observation is: The upstream receives the intended aggregate and no unauthorized more-specific prefixes. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “The RIB and FIB reflect only the authorized installed best or multipath routes” because the best verification observation is: The RIB and FIB reflect only the authorized installed best or multipath routes.

Question 140

At fictional Uplands Retail, a network engineer supporting customer edge routers is reviewing BGP routing, path attributes and EVPN exchange during an intersite service activation (HCIP-H12-821-BGP-035). The observed network issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. Which routing, switching, or network principle best explains the appropriate solution?

  1. BGP FSM states distinguish session formation failures from routing-update processing.
  2. BGP can retain multiple paths while installing selected forwarding entries under platform rules.
  3. eBGP multi-hop peers require explicit control of TTL and loopback reachability.
  4. BGP aggregation must be consistent with actual routed component reachability.

Explanation

Correct Answer

B:

The governing principle is: BGP can retain multiple paths while installing selected forwarding entries under platform rules. In this scenario, the appropriate action is: Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration. Valid evidence would show: The RIB and FIB reflect only the authorized installed best or multipath routes.

Incorrect Answers

A:

“BGP FSM states distinguish session formation failures from routing-update processing” responds to another technical or business failure: BGP stays in Idle after a new neighbor is configured and operators troubleshoot route policies instead of local interface reachability. That source case depends on: BGP FSM states distinguish session formation failures from routing-update processing. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “BGP can retain multiple paths while installing selected forwarding entries under platform rules” because BGP can retain multiple paths while installing selected forwarding entries under platform rules.

C:

“eBGP multi-hop peers require explicit control of TTL and loopback reachability” responds to another technical or business failure: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That source case depends on: EBGP multi-hop peers require explicit control of TTL and loopback reachability. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “BGP can retain multiple paths while installing selected forwarding entries under platform rules” because BGP can retain multiple paths while installing selected forwarding entries under platform rules.

D:

“BGP aggregation must be consistent with actual routed component reachability” responds to another technical or business failure: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. That source case depends on: BGP aggregation must be consistent with actual routed component reachability. The present issue is: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. The more direct action is “BGP can retain multiple paths while installing selected forwarding entries under platform rules” because BGP can retain multiple paths while installing selected forwarding entries under platform rules.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests