McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 12

Question 110

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-028). The observed network issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. Which observation most directly verifies that the corrective change succeeded?

  1. Neighbor Hellos are received and the intended adjacency reaches Up.
  2. The elected DIS originates the expected pseudonode and other routers form correct LAN adjacencies.
  3. Adjacent routers converge on consistent current LSP contents and route tables.
  4. Access routers select the documented exit and no longer follow an accidental preferred attachment.

Explanation

Correct Answer

D:

The best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment. It demonstrates the corrective action: Examine the L1/L2 router's attached-state behavior and desired inter-area default routing. This fits the principle: IS-IS attached-bit behavior can influence Level 1 routing toward other areas. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Neighbor Hellos are received and the intended adjacency reaches Up” responds to another technical or business failure: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That source case depends on: The best verification observation is: Neighbor Hellos are received and the intended adjacency reaches Up. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Access routers select the documented exit and no longer follow an accidental preferred attachment” because the best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment.

B:

“The elected DIS originates the expected pseudonode and other routers form correct LAN adjacencies” responds to another technical or business failure: An IS-IS router is elected designated intermediate system on an Ethernet segment but an engineer calls it an OSPF DR. That source case depends on: The best verification observation is: The elected DIS originates the expected pseudonode and other routers form correct LAN adjacencies. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Access routers select the documented exit and no longer follow an accidental preferred attachment” because the best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment.

C:

“Adjacent routers converge on consistent current LSP contents and route tables” responds to another technical or business failure: An IS-IS area contains conflicting LSP versions after connectivity flaps and routers disagree about routes. That source case depends on: The best verification observation is: Adjacent routers converge on consistent current LSP contents and route tables. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Access routers select the documented exit and no longer follow an accidental preferred attachment” because the best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment.

Question 111

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-028). The observed network issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. Which routing, switching, or network principle best explains the appropriate solution?

  1. IS-IS Level 1 routing has area-local visibility and relies on Level 2 interarea reachability.
  2. IS-IS identifies routing systems using unique system IDs.
  3. IS-IS attached-bit behavior can influence Level 1 routing toward other areas.
  4. IS-IS route leaking trades specific interarea visibility against scaling and policy control.

Explanation

Correct Answer

C:

The governing principle is: IS-IS attached-bit behavior can influence Level 1 routing toward other areas. In this scenario, the appropriate action is: Examine the L1/L2 router's attached-state behavior and desired inter-area default routing. Valid evidence would show: Access routers select the documented exit and no longer follow an accidental preferred attachment.

Incorrect Answers

A:

“IS-IS Level 1 routing has area-local visibility and relies on Level 2 interarea reachability” responds to another technical or business failure: A Level 1-only router cannot reach an IP prefix advertised only outside its local IS-IS area. That source case depends on: IS-IS Level 1 routing has area-local visibility and relies on Level 2 interarea reachability. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “IS-IS attached-bit behavior can influence Level 1 routing toward other areas” because IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

B:

“IS-IS identifies routing systems using unique system IDs” responds to another technical or business failure: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. That source case depends on: IS-IS identifies routing systems using unique system IDs. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “IS-IS attached-bit behavior can influence Level 1 routing toward other areas” because IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

D:

“IS-IS route leaking trades specific interarea visibility against scaling and policy control” responds to another technical or business failure: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. That source case depends on: IS-IS route leaking trades specific interarea visibility against scaling and policy control. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “IS-IS attached-bit behavior can influence Level 1 routing toward other areas” because IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

Question 112

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-028). The observed network issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. Which next engineering action best addresses the reported problem?

  1. Align the intended IS-IS area identifiers or establish a deliberate Level 2 relationship.
  2. Assign each IS-IS node a unique stable system identifier within the domain.
  3. Configure the actual point-to-point circuit type and validate neighbor behavior without DIS assumptions.
  4. Examine the L1/L2 router's attached-state behavior and desired inter-area default routing.

Explanation

Correct Answer

D:

The directly responsive action is: Examine the L1/L2 router's attached-state behavior and desired inter-area default routing. The specific reported fault is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. Confirmation should show: Access routers select the documented exit and no longer follow an accidental preferred attachment. The supporting technical principle is: IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

Incorrect Answers

A:

“Align the intended IS-IS area identifiers or establish a deliberate Level 2 relationship” responds to another technical or business failure: Two Huawei routers share a link but their IS-IS NET addresses use different area identifiers while both are configured as Level 1. That source case depends on: IS-IS Level 1 adjacency requires compatible area membership. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Examine the L1/L2 router's attached-state behavior and desired inter-area default routing” because IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

B:

“Assign each IS-IS node a unique stable system identifier within the domain” responds to another technical or business failure: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. That source case depends on: IS-IS identifies routing systems using unique system IDs. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Examine the L1/L2 router's attached-state behavior and desired inter-area default routing” because IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

C:

“Configure the actual point-to-point circuit type and validate neighbor behavior without DIS assumptions” responds to another technical or business failure: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That source case depends on: IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Examine the L1/L2 router's attached-state behavior and desired inter-area default routing” because IS-IS attached-bit behavior can influence Level 1 routing toward other areas.

Question 113

At fictional Maple Housing, a network engineer supporting property locations is reviewing RSTP, MSTP and switching interconnects during an intersite service activation (HCIP-H12-821-SWITCH-029). The observed network issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. Which routing, switching, or network principle best explains the appropriate solution?

  1. VLAN trunking requires explicit compatible tagging and allowed membership.
  2. STP root election uses bridge identifier priorities and MAC tie-breaking.
  3. Spanning-tree selected paths depend on cumulative root cost and bridge identifiers.
  4. Switch stacking creates a logical control relationship from compatible physical members.

Explanation

Correct Answer

A:

The governing principle is: VLAN trunking requires explicit compatible tagging and allowed membership. In this scenario, the appropriate action is: Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access. Valid evidence would show: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated.

Incorrect Answers

B:

“STP root election uses bridge identifier priorities and MAC tie-breaking” responds to another technical or business failure: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. That source case depends on: STP root election uses bridge identifier priorities and MAC tie-breaking. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “VLAN trunking requires explicit compatible tagging and allowed membership” because VLAN trunking requires explicit compatible tagging and allowed membership.

C:

“Spanning-tree selected paths depend on cumulative root cost and bridge identifiers” responds to another technical or business failure: A switch link that should be an MST root port instead alternates forwarding because path costs differ from the planned design. That source case depends on: Spanning-tree selected paths depend on cumulative root cost and bridge identifiers. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “VLAN trunking requires explicit compatible tagging and allowed membership” because VLAN trunking requires explicit compatible tagging and allowed membership.

D:

“Switch stacking creates a logical control relationship from compatible physical members” responds to another technical or business failure: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That source case depends on: Switch stacking creates a logical control relationship from compatible physical members. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “VLAN trunking requires explicit compatible tagging and allowed membership” because VLAN trunking requires explicit compatible tagging and allowed membership.

Question 114

At fictional Maple Housing, a network engineer supporting property locations is reviewing RSTP, MSTP and switching interconnects during an intersite service activation (HCIP-H12-821-SWITCH-029). The observed network issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. Which ongoing preventive or detective control would best reduce recurrence?

  1. Document root-primary and backup priorities for all switching domains.
  2. Compare MST region name, revision and VLAN-to-instance mapping before deployment.
  3. Check spanning-tree topology and loop guards before adding dual uplinks.
  4. Check trunk VLAN allowlists during new segment deployment.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Check trunk VLAN allowlists during new segment deployment. This directly addresses the recurring fault: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The corrective action would be: Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access. Success is demonstrated when: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated.

Incorrect Answers

A:

“Document root-primary and backup priorities for all switching domains” addresses recurrence of another problem: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. That problem depends on: The preventive or detective safeguard is: Document root-primary and backup priorities for all switching domains. The recurring risk here is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more targeted safeguard is “Check trunk VLAN allowlists during new segment deployment” because the preventive or detective safeguard is: Check trunk VLAN allowlists during new segment deployment.

B:

“Compare MST region name, revision and VLAN-to-instance mapping before deployment” addresses recurrence of another problem: A network requires multiple spanning-tree topologies but maps all VLANs into one MST instance. That problem depends on: The preventive or detective safeguard is: Compare MST region name, revision and VLAN-to-instance mapping before deployment. The recurring risk here is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more targeted safeguard is “Check trunk VLAN allowlists during new segment deployment” because the preventive or detective safeguard is: Check trunk VLAN allowlists during new segment deployment.

C:

“Check spanning-tree topology and loop guards before adding dual uplinks” addresses recurrence of another problem: An Ethernet campus has a physical loop but engineers disable spanning tree to reduce convergence delay. That problem depends on: The preventive or detective safeguard is: Check spanning-tree topology and loop guards before adding dual uplinks. The recurring risk here is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more targeted safeguard is “Check trunk VLAN allowlists during new segment deployment” because the preventive or detective safeguard is: Check trunk VLAN allowlists during new segment deployment.

Question 115

At fictional Maple Housing, a network engineer supporting property locations is reviewing RSTP, MSTP and switching interconnects during an intersite service activation (HCIP-H12-821-SWITCH-029). The observed network issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. Which observation most directly verifies that the corrective change succeeded?

  1. MST configuration digests agree and switches join the intended common region.
  2. The trunk participates in correct RSTP convergence and risky edge behavior is blocked.
  3. Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated.
  4. Both members appear in one stable logical stack with correct master and standby roles.

Explanation

Correct Answer

C:

The best verification observation is: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated. It demonstrates the corrective action: Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access. This fits the principle: VLAN trunking requires explicit compatible tagging and allowed membership. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“MST configuration digests agree and switches join the intended common region” responds to another technical or business failure: MSTP neighbors appear in different regions despite using the same region name because their VLAN mappings differ. That source case depends on: The best verification observation is: MST configuration digests agree and switches join the intended common region. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated” because the best verification observation is: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated.

B:

“The trunk participates in correct RSTP convergence and risky edge behavior is blocked” responds to another technical or business failure: An engineer places an edge-port setting on a trunk toward another switch and an unexpected BPDU enters the network. That source case depends on: The best verification observation is: The trunk participates in correct RSTP convergence and risky edge behavior is blocked. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated” because the best verification observation is: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated.

D:

“Both members appear in one stable logical stack with correct master and standby roles” responds to another technical or business failure: Two switches are configured for stacking but fail to form one logical unit due to incompatible member identifiers. That source case depends on: The best verification observation is: Both members appear in one stable logical stack with correct master and standby roles. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated” because the best verification observation is: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated.

Question 116

At fictional Maple Housing, a network engineer supporting property locations is reviewing RSTP, MSTP and switching interconnects during an intersite service activation (HCIP-H12-821-SWITCH-029). The observed network issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. Which next engineering action best addresses the reported problem?

  1. Treat spanning-tree topology and gateway redundancy as distinct design decisions.
  2. Use a supported cluster and link aggregation design instead of uncontrolled duplicate links.
  3. Set deliberate bridge priority and verify the elected root and port roles across the VLAN.
  4. Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access.

Explanation

Correct Answer

D:

The directly responsive action is: Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access. The specific reported fault is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. Confirmation should show: Frames from the new VLAN reach its authorized gateway and other VLANs remain isolated. The supporting technical principle is: VLAN trunking requires explicit compatible tagging and allowed membership.

Incorrect Answers

A:

“Treat spanning-tree topology and gateway redundancy as distinct design decisions” responds to another technical or business failure: A team expects MSTP instance root selection to affect layer-3 inter-VLAN gateway ownership automatically. That source case depends on: Spanning tree and default-gateway failover are independent control mechanisms. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access” because VLAN trunking requires explicit compatible tagging and allowed membership.

B:

“Use a supported cluster and link aggregation design instead of uncontrolled duplicate links” responds to another technical or business failure: A downstream aggregation switch sees duplicate MAC flaps after a switch cluster is formed without consistent cross-device link aggregation. That source case depends on: Multiple physical switching paths must have coherent loop and aggregation control. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access” because VLAN trunking requires explicit compatible tagging and allowed membership.

C:

“Set deliberate bridge priority and verify the elected root and port roles across the VLAN” responds to another technical or business failure: Two switches disagree about the RSTP root bridge and forwarding follows a low-capacity distribution switch. That source case depends on: STP root election uses bridge identifier priorities and MAC tie-breaking. The present issue is: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. The more direct action is “Permit the intended tagged VLAN on both sides of the trunk without broadening unrelated VLAN access” because VLAN trunking requires explicit compatible tagging and allowed membership.

Question 117

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing VRRP, BFD and redundancy design during a lab-to-production acceptance (HCIP-H12-821-RELIABILITY-030). The observed network issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. Which routing, switching, or network principle best explains the appropriate solution?

  1. Reliability design balances false failures against convergence latency.
  2. VRRP coordinates virtual default-gateway ownership among participating routers.
  3. BFD monitors a forwarding path but does not by itself create routing advertisements.
  4. VRRP priority and preemption behavior are separate configured failover choices.

Explanation

Correct Answer

A:

The governing principle is: Reliability design balances false failures against convergence latency. In this scenario, the appropriate action is: Repair the underlying link and choose supported detection timers or BFD that match availability requirements. Valid evidence would show: Failure detection meets the service objective without spurious adjacency resets.

Incorrect Answers

B:

“VRRP coordinates virtual default-gateway ownership among participating routers” responds to another technical or business failure: Two redundant gateways share a user VLAN but both are configured as active with the same VRRP virtual address and inconsistent group settings. That source case depends on: VRRP coordinates virtual default-gateway ownership among participating routers. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Reliability design balances false failures against convergence latency” because Reliability design balances false failures against convergence latency.

C:

“BFD monitors a forwarding path but does not by itself create routing advertisements” responds to another technical or business failure: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. That source case depends on: BFD monitors a forwarding path but does not by itself create routing advertisements. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Reliability design balances false failures against convergence latency” because Reliability design balances false failures against convergence latency.

D:

“VRRP priority and preemption behavior are separate configured failover choices” responds to another technical or business failure: A maintenance engineer expects a higher-priority VRRP router to take back Master instantly although preemption is disabled. That source case depends on: VRRP priority and preemption behavior are separate configured failover choices. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Reliability design balances false failures against convergence latency” because Reliability design balances false failures against convergence latency.

Question 118

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing VRRP, BFD and redundancy design during a lab-to-production acceptance (HCIP-H12-821-RELIABILITY-030). The observed network issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. Which observation most directly verifies that the corrective change succeeded?

  1. The routing session or route promptly reacts when BFD detects forwarding failure.
  2. Failure detection meets the service objective without spurious adjacency resets.
  3. Exactly one VRRP master owns the virtual gateway at a time under stable conditions.
  4. Hosts resolve the intended virtual MAC and maintain service during master changes.

Explanation

Correct Answer

B:

The best verification observation is: Failure detection meets the service objective without spurious adjacency resets. It demonstrates the corrective action: Repair the underlying link and choose supported detection timers or BFD that match availability requirements. This fits the principle: Reliability design balances false failures against convergence latency. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The routing session or route promptly reacts when BFD detects forwarding failure” responds to another technical or business failure: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. That source case depends on: The best verification observation is: The routing session or route promptly reacts when BFD detects forwarding failure. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Failure detection meets the service objective without spurious adjacency resets” because the best verification observation is: Failure detection meets the service objective without spurious adjacency resets.

C:

“Exactly one VRRP master owns the virtual gateway at a time under stable conditions” responds to another technical or business failure: Two redundant gateways share a user VLAN but both are configured as active with the same VRRP virtual address and inconsistent group settings. That source case depends on: The best verification observation is: Exactly one VRRP master owns the virtual gateway at a time under stable conditions. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Failure detection meets the service objective without spurious adjacency resets” because the best verification observation is: Failure detection meets the service objective without spurious adjacency resets.

D:

“Hosts resolve the intended virtual MAC and maintain service during master changes” responds to another technical or business failure: Two edge routers use independent VRRP groups with conflicting virtual MAC expectations and clients intermittently lose connectivity. That source case depends on: The best verification observation is: Hosts resolve the intended virtual MAC and maintain service during master changes. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Failure detection meets the service objective without spurious adjacency resets” because the best verification observation is: Failure detection meets the service objective without spurious adjacency resets.

Question 119

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing VRRP, BFD and redundancy design during a lab-to-production acceptance (HCIP-H12-821-RELIABILITY-030). The observed network issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. Which ongoing preventive or detective control would best reduce recurrence?

  1. Correlate VRRP transitions with physical and route tracking event logs.
  2. Test shared-risk failure scenarios across supposedly redundant routes.
  3. Simulate uplink failures instead of only shutting down the client-facing VLAN.
  4. Measure detection and end-to-end recovery rather than relying on configured timer values.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Measure detection and end-to-end recovery rather than relying on configured timer values. This directly addresses the recurring fault: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The corrective action would be: Repair the underlying link and choose supported detection timers or BFD that match availability requirements. Success is demonstrated when: Failure detection meets the service objective without spurious adjacency resets.

Incorrect Answers

A:

“Correlate VRRP transitions with physical and route tracking event logs” addresses recurrence of another problem: A VRRP group flaps repeatedly because upstream connectivity causes tracked priority to alternate around the peer threshold. That problem depends on: The preventive or detective safeguard is: Correlate VRRP transitions with physical and route tracking event logs. The recurring risk here is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more targeted safeguard is “Measure detection and end-to-end recovery rather than relying on configured timer values” because the preventive or detective safeguard is: Measure detection and end-to-end recovery rather than relying on configured timer values.

B:

“Test shared-risk failure scenarios across supposedly redundant routes” addresses recurrence of another problem: An interface failure is detected rapidly by BFD but the backup route points to the same failed upstream dependency. That problem depends on: The preventive or detective safeguard is: Test shared-risk failure scenarios across supposedly redundant routes. The recurring risk here is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more targeted safeguard is “Measure detection and end-to-end recovery rather than relying on configured timer values” because the preventive or detective safeguard is: Measure detection and end-to-end recovery rather than relying on configured timer values.

C:

“Simulate uplink failures instead of only shutting down the client-facing VLAN” addresses recurrence of another problem: A VRRP standby router never becomes master after the preferred uplink fails because only the physical LAN interface remains Up. That problem depends on: The preventive or detective safeguard is: Simulate uplink failures instead of only shutting down the client-facing VLAN. The recurring risk here is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more targeted safeguard is “Measure detection and end-to-end recovery rather than relying on configured timer values” because the preventive or detective safeguard is: Measure detection and end-to-end recovery rather than relying on configured timer values.

Question 120

At fictional Pinewell Electronics, a network engineer supporting engineering labs is reviewing VRRP, BFD and redundancy design during a lab-to-production acceptance (HCIP-H12-821-RELIABILITY-030). The observed network issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. Which next engineering action best addresses the reported problem?

  1. Repair the underlying link and choose supported detection timers or BFD that match availability requirements.
  2. Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway.
  3. Redesign independent backup next-hop reachability and validate actual alternate path availability.
  4. Identify shared physical dependencies and add independent power or placement where feasible.

Explanation

Correct Answer

A:

The directly responsive action is: Repair the underlying link and choose supported detection timers or BFD that match availability requirements. The specific reported fault is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. Confirmation should show: Failure detection meets the service objective without spurious adjacency resets. The supporting technical principle is: Reliability design balances false failures against convergence latency.

Incorrect Answers

B:

“Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway” responds to another technical or business failure: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. That source case depends on: Gateway availability and end-to-end network reachability are different reliability properties. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Repair the underlying link and choose supported detection timers or BFD that match availability requirements” because Reliability design balances false failures against convergence latency.

C:

“Redesign independent backup next-hop reachability and validate actual alternate path availability” responds to another technical or business failure: An interface failure is detected rapidly by BFD but the backup route points to the same failed upstream dependency. That source case depends on: Fast fault detection is ineffective without a genuinely independent recovery path. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Repair the underlying link and choose supported detection timers or BFD that match availability requirements” because Reliability design balances false failures against convergence latency.

D:

“Identify shared physical dependencies and add independent power or placement where feasible” responds to another technical or business failure: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That source case depends on: Network reliability depends on eliminating shared risks, not only duplicating network devices. The present issue is: An operator increases routing protocol Dead timers to stabilize a flaky link but overlooks the resulting slow failover. The more direct action is “Repair the underlying link and choose supported detection timers or BFD that match availability requirements” because Reliability design balances false failures against convergence latency.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests